#241

Just testing the Noyafa NF-521 Thermal Imager send by BangGood
Noyafa NF-521_Ali (32x32) go.tonyalbus.c...
Noyafa NF-521_BG (32x32) go.tonyalbus.c...
UNI-T UTi260B_Ali (256x192) go.tonyalbus.c...
UNI-T UTi690B_Ali (256x192) go.tonyalbus.c...
UNI-T UTi690B_BG (256x192) go.tonyalbus.c...
A-BF RX500_RX6xx (256x192) go.tonyalbus.c...
AMG8833 (8x8) go.tonyalbus.c...
A beginners guide by Mark B: amzn.to/3dwg0tc
#NOYAFA #NF521 #NF-521

[@halleffect2000]

I want to buy this to checking the electric draw inside the vehicles, do u think this is a good one?

[@TonyAlbus]

Hi, i think this resolution is prob. to low. Have a look at my video about the Infiray or Topdon both with high resolution

[@Thor_b]

Thank you I am looking at this item right now and the deal I’m seeing is $90 so surprisingly “good” quality and the frame rate wasn’t too laggy for my applications. 🤙🏽 definitely dropping a like and leaving a sub.

[@TonyAlbus]

Glad I could help and thanks for the Sub!.

[@_.__._8382]

Thanks for the review, really good!

[@TonyAlbus]

Thanks!

[@Laevoluciondeunclasicott]

detect hot and color water leaks one floor between a concrete wall or partition ?

[@TonyAlbus]

No i don't think it is that good, you need a higher resolution

[@RyZe_DaBoyz]

I got the same one and when i point it at my hand it doesn't glow like yours did

[@TonyAlbus]

It also depends on the ambiant temperature.. i am in 20 Celcius if you are in 30 or 30+ the differance with you hand temp. could be less.

[@CoalDustNorfolk]

It says in the "instruction manual" that comes with it, "When not using the device for a long time, please remove the battery inside the test terminal to prevent the battery liquid from leaking out." But then it give no instructions on how to remove the battery. Guess the makers didn't want to mention you have to tear the whole thing down.

[@TonyAlbus]

I think it is a legal thing... it is not made to be remove. but when it explodes, you are warned :)

[@CoalDustNorfolk]

@@TonyAlbus The wily SOBs! Don't say we didn't warn you, huh. Guess I'll store it in my bomb shelter .

[@davidbrowne1588]

Hi Tony Is this good enough for small PCB with smd, Thanks Dave

[@TonyAlbus]

Hi Dave, i don't think so, 192x256 world be a lot better, i will be testing the Infiray P2 soon.

[@davidbrowne1588]

@@TonyAlbus Hi Tony Thanks for the information I will wait for the new video, Thanks Dave

[@kaybhee6]

tony,, i bot one... not bad... but now i use dali t 1 - m.... for about usd 220,,,, much better,,,far more pixels... less noise... if u wish to try... dali china seems to make more professional stuff... hope it keeps on working,,,

[@TonyAlbus]

Thanks Kay, will have a look at that!.

[@kaybhee6]

@@TonyAlbus note it has shutter sound too

[@qadeerabbas5344]

Thanx alot for review...I can't buy ever like this cheap quality

[@TonyAlbus]

Thank you, i will have a better one later to review

[@georgetteconstant9050]

Regarding battery removal (previous post) seeing you take it apart, is this the little red box - that corresponds to the exterior charging port? Taking this apart looks scary.

[@TonyAlbus]

Yes leave it in...

[@georgetteconstant9050]

Thanks for this.Got this device and everything looks good, except how does one remove the battery (for long term storage) The manual doesn't show anything on this ! but I see small screws in the two adjacent holes on one side of the head and suspect that this is how to get at the battery? Appreciate it. Can't understand why this isn't shown on the drawings in the manual.

[@TonyAlbus]

No it a legal thing... just leave it in there..

[@bigmacsnoobselectronicsrep8032]

Hi would this in your opinion be able to find shorts

[@TonyAlbus]

Good question, i think you need a better one, higher resolution for more detail. i will have de Guide in a month or so

[@kaybhee6]

let us know ,,if one day u find , not expensive electric field imager,,, and magnetic field imager,,,

[@TonyAlbus]

Will do!

[@SwiftSilentRKS]

This guy sounds like GOLD FINGER from Austin Powers...

[@TonyAlbus]

Thanks! i am a big fan.

[@marcelinogtz6946]

Good review, thanks. Do you think this is a suitable camera for checking hot spots in solar panels? maybe at 1 to 2 meters distance from the camera?

[@TonyAlbus]

Not sure, the resolutions is very low, at longer distance it will be one big spot of something.. i would go for higher res.

[@emilsydykov6613]

Hi. Can you please recommend a cheap thermal camera for detecting short on pc motherboards? Looking for something cheap but that will do the job. Thanks In advance and happy new year!

[@TonyAlbus]

The cheap ones will not do the job.. you need a very high resolution for that usage

[@emilsydykov6613]

@@TonyAlbus which is the cheapest that will do the job?

[@RoMoofy]

Hi! Good review, Did you tried also on negative temperatures? I want to buy one to use on refrigeration rooms. Thank you.

[@TonyAlbus]

Thank you! .. oh , that is for sure i need to do next time, and i will... will have a better one later...and compare with this one

[@fahri4440]

does it detect underground floor water pipes ?

[@TonyAlbus]

For those applications, you need a better resolution i think

[@dennisqwertyuiop]

comes in handy for checking components

[@TonyAlbus]

Yes pritty nice :)

[@make-u-rich879]

The new infiray T2S is insane good and insane low cost 256x192 and 25hz frame rate. size of a coin. #t2splus

[@TonyAlbus]

Thank you!.. i will have a look

[@HT-xw1fh]

Best review I ever saw

[@TonyAlbus]

Thank you Sir!

[@georgetteconstant9050]

aaah-looked at another brand and think the battery is the long blue thing that snaps out? I'm completely non technical. thanks

[@TonyAlbus]

Yes the blue tick thingy is the battery

[@georgetteconstant9050]

@@TonyAlbus Appreciate it, thanks!

[@scoresandry]

Is this a standard 18650 battery?

[@TonyAlbus]

Yes it did look like that, but is was the solder version.

[@ssalient]

I have an old Fluke Ti10 and apart from a new battery eventually it still does a very decent job.

[@TonyAlbus]

Hi Marnix, Yes its hard to beat a Fluke even after so many years..

[@detectingadventuresscotlan8293]

@@TonyAlbus looks gd what's the distance Will it pick up a small animal in the garden ? Subbed 👍

[@TonyAlbus]

@@detectingadventuresscotlan8293 Thank you!, Not sure.. because the resolution is not that good. i think having a slight better one is adviced.

[@detectingadventuresscotlan8293]

@@TonyAlbus yeah probs m8 👍

[@My_foxy2019]

For cold water is good?

[@TonyAlbus]

The resolution is a bit low..

[@SayWhaaaaaaaaaaaaaaaaaaaaaaat]

Sad you speak in some chinese..would be great to be in english.

[@TonyAlbus]

Thanks Ton

[@hudaalattar206]

What is the difference between the temp values in the left corner there are two values thanks

[@TonyAlbus]

it is the Min/Max

[@jorgemilioguerrini1616]

Gracias!!

[@TonyAlbus]

Danada !

[@kaybhee6]

goot

[@TonyAlbus]

Thanks you!

[@kaybhee6]

@@TonyAlbus now i must order also,,, but only 1

[@joehubler4965]

Nice job

[@TonyAlbus]

Thank you Joe!

[@leboch65]

Can i detect if a person or animal hiding in my garden at night

[@TonyAlbus]

i think it can, but the garden needs to be a lot colder then the human/animal. this one is low resolution.

[@acerot]

Thanks for the review. Did you also try to compare the temperature values measured by this tool and by another (precise) temperature probe in particular spots? I would not only need to see what spots are hot but also how much.

[@TonyAlbus]

Thank you, i am not sure i did, is has been i while ago when i made this video. i will have a better Thermal imager later in a month i think

[@leboch65]

How far can it detect ?

[@TonyAlbus]

About 2 meters, big object maybe longer