2506WHP 5.0L Coyote Engine Teardown with Jay! What BROKE AFTER 50+ Runs?! (6.52@212MPH)

2506WHP 5.0L Coyote Engine Teardown with Jay! What BROKE AFTER 50+ Runs?! (6.52@215MPH)
Real Street Performance: realstreetperformance.com
--------------------------------------------------------------------------------------------------
TRC Gear ➤ thatracingchannel.com/
Facebook ➤ / thatracingchannel
Instagram ➤ / thatracingchannel
--------------------------------------------------------------------------------------------------
Recent Fan Favorite Videos:
3300HP GTR 237MPH TX2K KING | Lambo Wrecks : • 3300HP GTR 237MPH TX2K...
Sleeper Subaru STI GAPS Huracan Evo on the Street! : • Sleeper Subaru STI GAP...
1400HP "Fire Donk" DESTROYS Aventador on the HIGHWAY! : • 1400HP "Fire Donk" DES...
Top Secret RB26 Supra Ride Along! : • Top Secret RB26 Supra ...

[@realstreetperformance]

Popcorn ready to watch 😃🍿 🏁

[@The.church.of.scientology]

Love how my man really said "65 pounds isn't crazy!"

[@dwizzleusa4202]

This engine is probably the nicest best maintained coyote engine in the United States period. 2800+ crank hp with such reliability and well built. You have a one of a kind engine it shows when built right you can't beat a ford. Oh yeah with factory block crank and heads.

[@jkflorida]

Jay calling out the dude for saying 100% 13 times is hilarious! Edit: I think there’s some other KZbinrs out there that need to listen to Jay’s recap at the end! Smart and methodical vs just throwing all the boost at it.

[@ralphyoukers666]

%®✓

[@RadDadisRad]

An OEM block supporting 2500hp and running bottom 6s in a 3k+ pound car 🤯 great time to be alive

[@deepfreeze8918]

with sleeves, still insanely impressive

[@Watchmedome3017]

Like David Keith Duckworth said. “In any racing engine, the nearer you are to it disintegrating, the better it’s performance will be.” 😂 so send it boys! 💯💪🏼

[@Jafromobile]

Jay! Thanks for taking the time to autograph this sweet Real St banner! It's the favorite thing hanging on my wall at my new shop! Love what you do, and digging this TRC collab! Sincerely, unbiased Coyote owner and Real St banner recipient.

[@NITROUSnBIASPLYS]

Nice to see the coyote engine doing so well

[@geraldgoodiii6993]

Those rod bearings looked beautiful

[@dwizzleusa4202]

Crazy stock block stock head casting factory crankshaft wtfFord! Damn that's amazing

[@stevenbelue5496]

The approach to finding the edge, treating it like a bomb that could end you, like a sniper crawling, creeping for days to get into position, move to quick and your gone. Jay's take and explanation was on point.

[@Boostedm3nace]

I love these technical videos! Thank you for taking the time to edit and upload these!

[@mikefisher3787]

I love seeing the candid and honest approach to the video. I'm not ignoring a fantastic engine program, which you have, but you can easily diminish great content with bad video production. Thanks for a great video!

[@cameron878]

Great video. Thanks Brett, Jay and the guys at fast forward for their analysis!

[@cody6854]

Jay and the crew working smarter not harder 💯🇺🇸

[@Shy_Knee_Side_Up]

That motor and the car and driver’s performance at TX2K was legendary. Anyone who had any doubt about the Coyote platforms durability and performance are surely put to bed. Coyote > LS or SBC. Think the only rub on Coyotes are they can be a bit costly at times due to their increasing race car and motor swap popularity.

[@ImRacer1]

Look at pricing and it will be a good time before those 5.0s are as cheep as an LS

[@mehrshadvr4]

@@ImRacer1 doubt 5.0 can be as cheap as LS since it has more parts.

[@Cneal83]

But 5.0’s are expensive as hell you could go to the junkyard grab a 4.8 change the ring gaps and boost it 1000 horsepower blow it up and do again for less than a fully built 5.0

[@Cneal83]

@@bigboreracing356 bro I’m a ford tech I work on ford diesel’s daily and have been in ford dealers and shops for over 8 years I’ve seen all the ford engines and ford really doesn’t care you should see what goes on day to day in the dealers what crap ford puts out not knocking the engine but if you can make that type of horsepower for cheaper and it’s more reliable why not like it what’s so wrong with LS and LT engine platforms I don’t think any thing cause the next thing everybody is going to be on is the 7.3 and that’s nothing but an ls but the oil pump design is stupid

[@Cneal83]

@@bigboreracing356 ok gotcha but how many people have a stock block 2500 horsepower 5.0? I have this conversation with a friend of mine cause he used to be a Chevy tech and he loves that 5.0 we have either a gen 2 or 3 just sitting in the shop cause it was knocking and he wants to build it to put in his mustang but it’s going to take at least 7 grand in cams bearings chains and lockout plates not to mention tuning and work not being included in that price that we would do guess it just comes down to what you want to do and put your time and effort into seems like it takes a lot more heartbreak and effort to make those things comparable to the cheap LS platform

[@marshalleng1933]

There’s always excellent information coming from this channel! I appreciate the content y’all put out. Real ST and FFRE’s engine program is king daddy! Coyote FTW!!😮‍💨🔥🔥

[@TheRvg03gt]

Great video!! Loved the way you all explained everything!!

[@tomhamilton9140]

Great build. Thank you for the updates. Looking forward to your next race win. 😎

[@Petethedeadboy]

Can't think of a more interesting engine to showcase ! I've been dying to know how it held up!

[@stainxpert]

“She’s a party girl 😏🤓 That’s how I like em 😏” Footage like this is awesome! Seriously… how many teams / programs will show you behind the scenes data / footage like this 😏 Very critical to success Everything is usually kept hush hush 🤫 This team (Real Street, FFRE, MSR, Plaza, Manley, ARP, OneE, etc.) have literally turned this into an art 💯 I & many others I’m sure are extremely grateful for this footage / critical data

[@heathwirt8919]

Very interesting teardown and discussion, love the methodical and scientific approach to building and modifying this Coyote engine. The horsepower and torque numbers are far beyond what I thought was possible for this relatively small displacement DOHC V8. The fact that the engine is in such good condition after all the runs at this ridicules power level is a testament not only to the original design but the modifications, setup and tuning. The broken cam cap could have been a manufacturing defect since the others were fine. Great work, thanks for sharing this video.

[@heathwirt8919]

@@bigboreracing356 From the description of the build that was not the case.

[@69BOSS429]

I’ve been waiting for this video.

[@vinmandich7756]

I have fell in love with the coyote for sure my 2019 has a 5.0 and for 300ci amazed me the capability of it

[@Sbassmaster77]

@@bigboreracing356 I’m pushing 280k on my coyote. I’ve only had to replace the water pump. Maintenance is key.

[@jnewt5978]

Awesome video! Thanks guys!

[@jerrywhittaker1052]

Great video! Joe / FFRE sure make a good engine!

[@lockedinstreetracing6005]

I run the Ls Next aluminum block which is aftermarket and for you to make that kind of power with just changing really a few things is crazy. I’ve not had no problems really either I’ve got a pretty solid program and I think it’s a testiment to your program and how good those engines really are. That’s pretty much what you have to do is go slow and have data everywhere and see what’s going on record it before it’s pushed but dammit man brava on keeping it together and running good awesome job guys.

[@SilverRaven1959]

Great Vid and a real eye opener to those who don't know of believe...Coyote The World!!!

[@calebjones7769]

Awesome!! Good stuff

[@CmoneyGarage]

A+ video, very informative 👌🏾

[@infineon222]

4.6L terminator is an AMAZING 4v mod motor.

[@chadkent1241]

Mihovetz ultimately took the 4.6 4V to a 5.88 @ 256mph highest trap on oe block, heads, and timing components, factory Kellogg crank. 60 psi a tad over 3,000 hp @ 10,000. The twin cam 5.4L GT holds the standing mile world record of 300.4 mph. Ford's twin cam engines > everyone else

[@infineon222]

@@chadkent1241 100%!

[@MichaelHeinrich1]

Great video, lots of information. Great engine.

[@Earache.]

How’s it feel to be one of the people taking the platform further?

[@jimmymccormick142]

Great video Ford power forever baby keep on doing the great work you fellas do congratulations on your win and proving to everyone just how great the Ford engine is

[@chadkent1241]

MMR has made over 4,000 rwhp with a 351 in³ billet block and GT350 heads. 5.67 @ 265mph

[@DodgeandGMkiIIingFurdDaiIy]

@@chadkent1241 billet block*** 😂😂😂😂😂😂😂

[@DodgeandGMkiIIingFurdDaiIy]

@@chadkent1241 borowski billet LS engine made 4500 btw

[@425Russia]

“Idk what to do with my hands”😅😂 the guys on the left and right nervous as hell!

[@sailingjazzy8272]

Very cool tech info - seen this car run at Orlando - definite beast.

[@nathanrobinson9141]

Are they factory ford primary guides and tensioners?

[@libertylifestyles3806]

Would a after market belt replacement of the chane "mod" be a theoretical option to better the motor?🤔🧐? What say u Sir?

[@Twentyfoursilver]

Outstanding !

[@boostedperformance4529]

this car and crew is always a beast do work

[@richarddean9306]

What a great video. Thanks

[@jamesj5469]

I love engine builds ❤

[@keefespencer1173]

Since the engine is tore down and you are upgrading some parts to make it stronger you should upgrade from the wire in the block and the receiver groove in the heads you should upgrade to the top fuel hoops so you know for a fact that the heads are completely sealed to the block and I would put billet main caps in it as well and maybe eventually go to an aftermarket block but if you don't have Darton sleeves in your current block I would do that as well and make your current block completely bullet proof and that way you know you always have a great back up engine for when you do build an engine with an aftermarket block and heads

[@joefergerson5243]

Excellent video!🤟❤

[@3dsmackdown]

It was like watching an episode of ER. Sooo awesome.

[@obsidian....]

This is great. Thank you 🙏

[@Bill-flatplanefool]

Any thought on a timing belt conversion?

[@scottgarmon4865]

Things have progressed such along way since the old foxbody 5.0 push rod bock design.

[@randalltufts3321]

Cleetus pinched a boost line and it cost him a motor. The coyote is a monster ! Thanks for the view!

[@Toddo127]

Great content 👍🏼

[@jeffledoux5439]

Excellent video TY....what tranny do you run in SR ? Curious after video

[@02autogt]

This man has become a legend in the Coyote community, continuously setting the bar for Coyote performance!!! Attention to detail is amazing!! The amount knowledge right there is amazing as well!!

[@exothermal.sprocket]

Curious question for you guys at Real St. I see you do K20 Honda builds and Coyote Ford builds. Have you ever done a EA888 VW build?

[@ilovelulu8492]

Kudos to these guys for what they've accomplished but personally I f'n hate modular v8's, but they do make some power lol.

[@Final_Boss_Racing]

I looked for the stage 4 coyote engine on the website is it available?

[@RonnieT123]

Amazing motor 💪

[@bigmikes2140]

What are the intake temperatures at the end of the 1/4? Are you running meth injectors in the intake?

[@alexthompson5172]

Would love to see a 2900whp dyno run 😮

[@ejohnson3837]

At this horsepower and boost level, billet cam caps are a must have.

[@Cneal83]

Congrats to those guys putting the time and effort and money into making that coyote into what it is never really seen a lot of crazy horsepower 5.0s

[@daveminor372]

Good Ear Mr. Brett. Saved it !

[@GTRliffe]

lean on the Cam cap clearance Braze weld a skirt support too the bottom of the bore. Quarter inch addition would do it

[@GTRliffe]

Blue loctite the balancer and flywheel. just put it on all mating surfaces outside the fasteners. As well as fasteners.

[@santibh88]

Had same failure running 2000hp boss 2013 engine. The problem was not enough oil pressure going over there.

[@tomparry4313]

Not to take anything away from the Coyote but MMR were getting 3400hp from a 4.6L (281ci) years ago and running 5s all season long on the same engine. 4.6 mod motor was no joke if you know what your doing.

[@mikealbert728]

MMR never got 3400hp from a 4.6. MMR was running a sleeved and filled 5.4 based motor with billet crank and it was around 3000hp. They have been running a billet coyote block motor for the past few years. Mihovetz was was running a stock 4.6 block making around 3000hp.many years ago.

[@creedns]

Mmr is a joke. Make great shit for themselves, sell snake oil and garbage to the consumer

[@young11984]

And this block is t filled like MMR and Johns race engines were either, take away the fill and poof...ashes

[@mikealbert728]

@@young11984 mihovetz blocks weren't filled. Just MMR

[@02autogt]

​@@mikealbert728 I know the decks were welded solid but no fill as you say, that's interesting. I remember reading about them balancing the cams, the amount of harmonics was crazy.

[@bootneylee9802]

Real pros. And I guess FORD no longer stands for Found On Roadside Dead these days?

[@young11984]

When they are you can usually look back at owners maintenance or EPAs required junk that causes constant issues. That engine would pass an emissions test as good as one with all the mandated garbage, get better mpg and longevity imo

[@J.C...]

It's so, weird to know that this stuff just isn't out there like it used to be. I remember when Suprafo rums was THE PLACE. Sooooo much stuff for sale. Man... I actually saw an R34 GTR here in Shreveport, LA a few days ago. I almost couldn't believe it.

[@Mena6e.c7]

What engine should I swap in my e 46

[@hopeandrelax]

What fuel is used to run that type of boost ###?

[@Giitzerland]

That's a long long way from my old pushrod 302 :)

[@edwardjones2748]

Informative

[@cobra7250]

I think I heard you fellows mention a billet cam bearing cap. I am pretty sure if you look it up they will not wear as good as the cast silicon aluminum.

[@dirtywrx8478]

I like how Jay is wearing a Supra shirt while helping them.

[@kenthall6584]

Chains and brains!

[@10R8OH]

Brett had on the now and later gators 🐊

[@roostingthe6520]

The guy talking about seats knows his shit!

[@Spad68]

Just wondering why the crank will ne changed? It looked really good when you took it out .

[@Red2l16v]

They had a caption that said it was bent 4 thousandths so they would replace it. They could tell due to marks on the mains it was bent.

[@klote82]

Jay is a GD legend!!! #REALS**T!!

[@RAZZE-RACING]

Hi why don't you make the sleeves a bit longer so it doesn't hurt the pistons so much? Really cool build, what would this spec engine cost?

[@Fast351]

I don't think there's enough clearance to the crank to allow it.

[@alexiegomez1691]

Dohc pentroof vs Ohc hemi🤔

[@slyr1]

I would like to see how far we can go with the GT350 5.2 Engine I don't see much out there that push the block on the 5.2.

[@Jimmyxsx]

5.0L, 5.2L predator or voodoo are pretty much the same.

[@kevinthomas8146]

Lol at the butt hurt Chevy boys in the comments.

[@fatasdat]

Ford , and Ford performance vehicles in Australia, sold a few different badged/model cars with a factory supercharged coyote engine!! (315kw) (Ford Australia developed the supercharger kit) The code name for them is 'Miami' I have seen them get 500+rwhp with just a Bigger water/air intercooler and pulley change (not the party one) You are Guaranteed to find them here in Australia.. Happy hunting. Lol

[@ashton.hpking]

I would say it’s time for billet cam caps.

[@GL8ZE]

Need a “100%” shirt made

[@northwestmountainbikeaddic6874]

Is this the motor out of green snot?

[@young11984]

Yes

[@crxtodd16]

I'm imagining destroking it, then revving that bad boy up to 9k.

[@mrcameron0301]

Murder nova you need this setup for your f150

[@jacob1423]

he’s got a whipple on his

[@RadDadisRad]

MMR billet block next?

[@R0cketRed]

Jay's super Jelly 😂. 👌 come to the dark side

[@chadkent1241]

Update..... now a 6.33 @ 225mph

[@chrisknouse6736]

Why don't ohc engines not have bearing shells?

[@ProjectFairmont]

Good question. Spinning a valvetrain that has less mass than an OHV engine which have much larger lifters, and rockers, plus a pushrod, I would think.

[@victorsabala2108]

it time to move full billet aluminum block

[@PhillyDee215]

Never to much power.....or is there?

[@LonnieHutchinson90]

Y’all gotta try out that new 7.3 Godzilla engine and do some development on that

[@RyTrapp0]

Would LOVE to see them play with a 'Zilla - but I think Jay may be allergic to pushrods LOL

[@NovaRedHead]

So "Real St McFlurry" then😂

[@jacob1423]

??? when did he blow up the f150?

[@jeffsmith6371]

Is this a gen2 or gen 3 engine originally? could is live in a drag and drive environment?

[@02autogt]

GT500 5.2 so more closely related to a gen2 I'd say since they don't have direct injection.

[@hookmaster1109]

He already did Sick Week with this exact engine and ran his PB 6.52 @212 during the event.

[@juniorhenderson7512]

What's really amazing is GTR's making that kinda power with ac, full interior, power steering, power windows, all glass, and with only 6 CYLINDERS!!!!,😮

[@definitionmedia1130]

2jz and RB still kill the Mustang.

[@rickitysplitz7035]

@@definitionmedia1130 Stock for stock, no it doesn't. Mod for mod, it all varies on what you do.

[@GTRliffe]

Mill couple thousand of all the head gasket surface that isn’t needed. this increases clamp on the areas that matter

[@willecutlip]

Cast cam cap? Flaw in the casting that just took a hella-long time to fatigue out?

[@adamdodsy84]

Harmonics mixed with aggressive cams and higher spring pressure.

[@young11984]

Designed for 400hp and 100k miles not 2500hp and 1200miles, when something breaks its improved apon just as with any new style engine programs components are. Its usually a run it til it breaks approach on certain things to have data on its limitations

[@willecutlip]

@@adamdodsy84 no doubt - it would be interesting to put all the other caps under the microscope to see if there are micro fractures already present in them. 😎🤓

[@diambo4life]

Totally badass...okay?