How to change the brake pads and rotor on your c6 z06 / Grand Sport Corvette. Full Brake Job took about 2-3 hours (Brake bleeding takes some time). Thanks for Watching!
Пікірлер: 22
@z5123456 ай бұрын
Nice video. One thing, move your floor fan away from the wall , for better air flow.
@jamesbyars43852 жыл бұрын
When bleeding the caliper ,,,should you bleed the inside valve first then the outter on each caliper. Or is one good enough per cailper.
@andyharman3022Ай бұрын
you need to bleed both. Start with the one furthest from the brake master cylinder. outer, then inner.
@youngestson65375 жыл бұрын
Great video. New subber. 👍🏽💯
@RaztechPowersports5 жыл бұрын
youngestson 65 appreciate it 🤙🏻
@russmt41816 жыл бұрын
you should open bleeder when pushing in pistons and send fluid into catch pan instead of back through abs system.
@RaztechPowersports6 жыл бұрын
I don't because I don't want to take a chance of draining the master cylinder while trying to push the pistons back in. It would make a mess as well.
@scottdman6 жыл бұрын
Could you link the brake bleeder tool and the extended reservoir tool you used on the master cylinder?
@One-way3 жыл бұрын
I guess not...
@Alex12348452 жыл бұрын
It’s from harbor freight
@scottdman6 жыл бұрын
Out of curiosity, any reason not to do the automated bleed with the ABS pump after completing the process at the wheels?
@RaztechPowersports6 жыл бұрын
scottdman if you have the tool to cycle the abs, then yes, it’s a good idea. If not, no big deal. It’s a very small amount of fluid
@scottdman6 жыл бұрын
thanks, I wasn't sure if it was necessary/required as part of the bleed process. I'm planning a caliper swap w/stainless lines on my base C6 and was curious. Appreciate your reply!
@Anthony_Pell5 жыл бұрын
Do you realize there are 2 bleeder valves per caliper? I only saw you loosen one bleeder valve per caliper. Is there a reason for that?
@RaztechPowersports5 жыл бұрын
Anthony Pell If the calipers were bone dry you would need to bleed both of those bleachers. Says they are full of fluid I am simply pull in the fluid through the caliper. It would not hurt to do both of them though.
@RaztechPowersports6 жыл бұрын
Make you clean your rotors with brake cleaner before you install them.
@alekfarmer24176 жыл бұрын
Brad Raziano very importanttt
@Venom04964 жыл бұрын
I don’t think anyone removes the Allen bolts to remove pads
@SelimxBradley6 жыл бұрын
What do you do for work dude?
@RaztechPowersports6 жыл бұрын
We're All Thieves Own a property maintenance company and fabrication/welding/ automotive repair. Pretty much anything to hustle $
@spazoq6 жыл бұрын
You need a Tech II to do a proper job. Sorry..
@FredFlintstone21 Жыл бұрын
Ya that's if you trust other people to work on your stuff, I don't.