2900lbs 350z quarter 1/4 mile drag racing STOCK DE vq35de LIGHT WEIGHT 350z

2900lbs 350z quarter 1/4 mile drag racing STOCK DE vq35de LIGHT WEIGHT 350z
ig @ace350z

[@al3zmi]

The 370z can be tuned to have flat foot shifting with uprev Arc or Ecutek, i have used it. So i think 350Z can have this feature. It actually uses the "clutch switch" the same as when you do launch control Which means...you have to push the clutch all the way in before shifting to get flat foot shifting. It will still ruin your transmission if you mess up. For me after many attempts, testing various options, i managed to get 12.78 For this i had to remove everything from trunk..and couple of plastics like door panels middle console, any plastic in engine bay like covers, i used R888 295/30/19 dropped to 25 psi, suspension upgrades, inculding all Z1 for subframe bushings and collars and brace All Full bolts on + ethanol. Ported Upper&lower intake manifold+ EPS Throttle bodies 3 inch intakes Isr LT headers + 2.5 inch manzo dual exhaust Gtr injectors, Z1 fuel rails, walbro 340 Lph pump, Z1 coil pack. Complete Zspeed quick shift clutch kit + Z1 short shifter Other Z with similar Bolts on ran mid to low 13s so im extremely happy

[@dham99]

Always loved these cars...I'd love a stock looking, professionally built 03-08 model with a twin turbo set up. Basically wider wheels/tires, but completely stock looking. I saw a blue one a few years ago on ebay, had like 600rwhp. But good luck getting into the low 13's! My 2016 Focus ST is FBO/e30 and the car from a dig is crap..dont think I'll ever be drag racing it at the track..but it does get to see road courses where it accels! Hope to see you run even quicker in future vids!

[@TeamXLR8Z]

Welcome to the lightweight z club!

[@DavidSmith-tz9bx]

great video car sounds and revs great!!!

[@d3xtr0see]

Awesome vid! One day I'll have one of these, subbed!

[@RR-uc2sg]

Love it man! How did u launch like nice and easy off the line? What rpm you take off and what tires you run

[@OM4Rx]

Was he tuned or no tune when your buddy broke the cd09?

[@ThatOneZPlug]

Where did you get the rear window spoiler?

[@taylorrichter1320]

What was your best trap speed?

[@PerryDan]

How do you get your car to do standing burnouts

[@Ggg-ef6vb]

U do 2 gear burnout ??

[@vally6853]

What have you removed?

[@JEG831]

is it really a stock DE with weight reduction?

[@BunnyBUNGALO]

How much power

[@wrecked350]

i run a 13.50 with full interior with a 255/35/18 street tire all i took out was the spare and the passenger seat weighs 3350 at the track all i have is minor bolt ons and a tune i can get a 13.499 somehow if my clutch would stop slipping

[@redline350zHR]

Bruh thats dopeeee… im bout to check ur channel

[@joelserrano1298]

Im doing m1 on mine, already has a 4.36 FD on it! looking to do 12.9 or better on Street tires! with m1 13.0 on 93! if possible then a 150 Shot Tuned to see how far i can go on a stock block and just ported heads Mods on mine are as follow: 3.5 RZG Intake 75mm TB Plenum Spacer Ported and polish Upper plenum Ported and polished Lower plenum Ported Heads 1320 Headers 1320 Test Pipes 1320 Y Pipe and a little pipe ( about 1 foot long after the Y pipe, Yeah is loud as hell) 4.36 FD Solid Diff Bushing 17 Pound Flywheel stage 1 clutch tranny swap for a CD009 and completely striped down like yours!!! also running Achilles ATR 275/45/18 in the back! Looking to be one of the quickest 350's 2003 stock out there!!

[@wrecked350]

how much to the wheels do run cause im running 13.5 on 255/35/18 and all ihave is minor bolt ons and i just have my spare tire taken out with my seat out

[@joelserrano1298]

@@wrecked350 283/258 I am all striped down and I mean all but the dash! I did 12.88 @107 and 12.81 was my best on good gas! not that big of a difference!!!! I gess to see good gains off the M1 i need some good cams! all on street tires! maby some slicks could lower my time a little more! maby 12.7 12.6!!!! I doubt ill get anything further than that! lol 11 is a dream! unless I go NOS!! I havent done that yet! Ill run 11.9 easy with a 150!, what killes my time a little off is the 5th gear because of the 4.36!, but it is what it is! I have to granny shift 5th, unles it doesnt go in, and because of the 4.36 you still have some Tq left on im to pull a little more!!! 4.36 is good, but its not some times lol!

[@christhan9704]

That sounds like a lotta fun man! Do you ever drive it on the street? Wondering how the 4.36 fd would be like on a daily

[@jellofuel]

What all did you do to get down to that weight? Looks like metal speaker box, racing seats, maybe replace the heavy exhaust?

[@216_._photography2]

Do you know of any affordable short shifters for an 03 350? Because my 1st to 2nd is very violent and makes me lose speed.

[@cainadkins3985]

Driver mod is necessary probably

[@poloway9446]

that shifter long long 😭😭😭

[@brandonswervy1698]

Looks fun lol

[@briansnow2001]

Is there a scale at sac raceway? I'm in the process of stripping mine out and want to get it weighed.

[@reefdynasty7617]

Nope no scale that i know of.

[@acedrifts]

Yea bro there is a drive up scale in the parking lot as soon as you pass the time slip booth

[@briansnow2001]

@@acedrifts thanks!

[@ClaytonMacleod]

Must be something wrong with it if those are the kinds of times you were getting and you removed enough stuff to get it down to 2900 pounds. My 100% stock 2003 Performance did 13.85 @ 105.24 mph with nothing removed. And that’s with a somewhat gentle start because I didn’t want to risk breaking anything, even if that’s not really a risk. Spare tire still in there, all tools, everything it came with still in the thing. Could probably shave a couple tenths off that if I actually had started hard. And that’s a 2003, which made the least power. And it wasn’t even a prepped drag strip. It was just a regular road. Weird.

[@acedrifts]

I managed to do 13.08 2 weeks after this vid was recorded

[@ClaytonMacleod]

@@acedrifts Now that’s more impressive. Nice!

[@GregDZ33]

If you have a stock 2003, trapping 105mph, it’s the highest 1/4 mile speed pre-VQ35HR model in the world lol

[@ClaytonMacleod]

@@GregDZ33 *shrug* It ran what it ran.

[@BunnyBUNGALO]

What's your DA?

[@CrazyAsisan24]

Better gearing and cam should get you low 13 or high 12

[@modsandmissiles3344]

Why speedo no work

[@TheStoicmasculine]

Power mods and tune?

[@acedrifts]

Nismo headers, test pipes, but no tune

[@nbdxchance9010]

@@acedrifts dudeee a tune will make u a whole second faster. You’ll get to rev out each gear way longer my g35 revs to 8k.

[@samson_BNR32]

@@nbdxchance9010 plenum spacer and CAI with Z1 tune will help greatly. with ARC features. Jon will get you running perfect

[@acedrifts]

@@nbdxchance9010 i wanted to get a tune but i would much rather spend that 1k on a stand alone ecu, that way i can use that for the vq and when i throw in the 2j

[@aabedalhalabi3276]

can i use 350z for drag race and drift in the same car?

[@MrMuffanga]

Not exactly . Two completely different suspension set ups