Took Zeroy out to Wednesday night test and tune to see what kind of numbers I could put down! Can't wait until next time! BLACK FRIDAY DEALS LIVE AT MIDNIGHT - LZMFG.com
Пікірлер: 1 000
@txwatts4 жыл бұрын
Adam: I think we're gonna use launch control on this pass. Launch Control: I'm about to end this man's whole career.
@R4MP4G3RXD4 жыл бұрын
For the second time
@sthako.se.98504 жыл бұрын
Launch Control: Ladies and Gentleman, we got him.
@austinclark33544 жыл бұрын
R4MP4G3RXD for a third
@collinweinheimer10564 жыл бұрын
Alberto: Ah shit, here we go again.
@txwatts4 жыл бұрын
@@collinweinheimer1056 😂😂🤣
@AdamLZ4 жыл бұрын
Happy thanksgiving!
@garrett5914 жыл бұрын
Adam LZ happy thanksgivings
@garyatwal18924 жыл бұрын
Adam LZ Happy Thanksgiving Dad
@Zeke3V4 жыл бұрын
Adam Lz,Happy Thanksgiving brother
@charliepayy4 жыл бұрын
don't have thanksgiving in UK
@Alex_Lindsay7174 жыл бұрын
Try using a clutch masters clutch delay valve it will essentially act as a clutch slipper but you can just let it out normally!
@AibonitoPerformancePR4 жыл бұрын
Engine: I'll send a rod through this block Transmission: I bet I make this car go nowhere Differential: : "Hold my beer" Kaboom lmao Happy Thanksgiving all
@LANDSPEED3K4 жыл бұрын
What's next? The transmission tunnel snaps in half and the car does a split?
@phantomsean14 жыл бұрын
hes broke all 3 in the past like week lol so maybe its the last thing to break lol
@Sp00kq4 жыл бұрын
*insert big explosion meme*
@skiskrt33164 жыл бұрын
phantomsean nah Axels haven’t twisted yet
@nitronick12204 жыл бұрын
ZERO DISRESPECT! But learn to preload 😂 you dumping clutches like your drifting is causing all the problems. I broke 2 axles before i learned to preload an launch properly. Honestly works wonders!
@AdamLZ4 жыл бұрын
I was pre loading it with the handbrake, you can’t tell in the video
@nitronick12204 жыл бұрын
Adam LZ when i broke my axles i was preloaded on the ebrake too! But if release clutch to fast off preload cars tend to wheel hop and thats when they really kill driveline parts.
@lazarjanjusevic34 жыл бұрын
@@AdamLZ the clutch that you have in the car is waaay too brutal for the stock driveline...
@eel13314 жыл бұрын
@@AdamLZ yeah man that clutch is going to kill everything. It makes it really hard to launch smooth. IMO.
@luv4xlr8ion4 жыл бұрын
@@AdamLZ time for a slipper clutch like Leroy 😋
@TheGreenlightman4 жыл бұрын
I guess the Cobalt with electric turbo is officially faster..
@pieterjancousserier99004 жыл бұрын
B I L L E T B L O C K you won’t
@astletruscott62914 жыл бұрын
End the year of the flex right
@ryangreen40244 жыл бұрын
Billet diff
@msengineeringdavid31484 жыл бұрын
Pieterjan Cousserier billet block will not fix anything you idiot..
@timvanbriesen89164 жыл бұрын
It won't matter, if he can't put the power down. The entire drive train needs to be beefed up, and most the suspension needs to be strengthened as well it can't handle the power he has now!
@msengineeringdavid31484 жыл бұрын
Listen ppl He can’t DRIVE FOR SHIT
@Chazileezy4 жыл бұрын
Keep it red white and blue for even more Leroy troll 😂
@JoniC5034 жыл бұрын
Red+white+blue= MERICA in a Japanese car
@garrett5914 жыл бұрын
Salvadorian Stig fact of the day: merica is Indonesian for pepper
@davidsok61554 жыл бұрын
Adam “I like how it’s red white and blue Me “But it’s Japanese
@benjaminmartindale4 жыл бұрын
yeah America is the best country anyway so I would rep red white and blue.
@devinwatterson4 жыл бұрын
designed by an american though
@c0c0asauce4 жыл бұрын
It's just a color combo that has looked good since before people started racing cars.
@mikewalker60164 жыл бұрын
@@benjaminmartindale yeah school shootings are the best! Oh and all the homelessness, that's the best also 👍
@Anon.G4 жыл бұрын
Although drag racing is probably biggest in the US
@plebtile33474 жыл бұрын
Adam: "Gonna use launch control." Zeroy: *Chuckles^ "I'm in danger."
@Treypatunas4 жыл бұрын
“I didn’t think that would happen”- wearing a “drive until it breaks” t shirt while launching a twin turbo stock diff car
@bobmartin52594 жыл бұрын
Gotta use the same clutch like leroy "thats actually slipping on purpose" :)
@fiqirr4 жыл бұрын
That would be useful for when the car gets its built engine and runs on a lot more power. For now they gotta make the car go A to B without having to worry about breaking it.
@nitronick12204 жыл бұрын
Slipper clutch would be overkill! He just needs a twin disc an learn how to preload, the kids a drifter hes use to just dumping clutches. Thats not how drag racing works though unfortunately.
@E46TY4 жыл бұрын
Nick Stevenson he knows how to slip a clutch. He slipped it when it broke but the diffs are weak and it was too much load when it dead hooked. Even Leroy has been thru built transmissions and diffs slipping a clutch, but when it dead hooks with a lot of load it’s so much torque to the driveline that shit just breaks
@WizzleThump4 жыл бұрын
Leeroy over double horsepower 😉
@nitronick12204 жыл бұрын
Tyler Chedister if he slipped the clutch then why do the rpms drop right off 2step at 4500 to 3000, instead of climbing like they should if it was slipping?!?! Ive been drag racing for 8 years everytime I preload a car and slip the clutch the rpms climb not drop. I launch off 7250 on slicks an ive only broke the splines off the axle in the hub twice from dead hooking. Never exploded a diff that’s usually improper driving from what ive seen personally at the track. Usually wheel hop causes diffs to blow, mostly from dumping the clutch...even when preloaded if let clutch out to fast all hell breaks loose
@HoweDoYouDo19994 жыл бұрын
I don’t think he’s going to get much seat time in a broken car 😂
@astletruscott62914 жыл бұрын
Its at about a minute and -$2000
@HoweDoYouDo19994 жыл бұрын
Astle Truscott haha drained just bank account just to have it break again this shit finna have him stranded😂
@hoodrabbit42934 жыл бұрын
@@HoweDoYouDo1999 year of the flex...never drained
@spookowns4 жыл бұрын
could always sit in it and play forza? ^^
@HoweDoYouDo19994 жыл бұрын
Spook if I built a car with this much effort just to play video games in it the reality of the matter is it will never meet video game reliability standards 😂
@Novice_Mentality4 жыл бұрын
Adam: *Blows Diff* "Saw that coming..." Also Adam 2 minutes later: " I honestly didn't think that was going to happen" hahaha, total bummer but that's racecar life man! Build, race break and repeat
@shona55124 жыл бұрын
I think he meant he expected something to break, he just didn't expect to blow the diff out.
@Novice_Mentality4 жыл бұрын
@@shona5512 Yeah, I kind of figured since he knows he's running so much power over stock, but I still got a chuckle out of it lol
@HoweDoYouDo19994 жыл бұрын
If he saw it coming he shouldn’t be saying the opposite 2 fucking minutes later 😂
@liamheuvel26814 жыл бұрын
Adam: *builds 700hp z without solid diff bushings or diff brace* 370z: *stud on diff snaps and greades itself* Adam: *surprised pikachu meme*
@SportModeCrocs4 жыл бұрын
the irony of you wearing that t shirt saying "drive until broken" :D
@nielsreiziger48504 жыл бұрын
13:27 Shulman got me on that one hahaha
@MattShulman4 жыл бұрын
Maximus Gameplay 😂😂😂
@patmald4 жыл бұрын
the year of flex is almost completed :( I vote to change it to the decade of flex
@rrafixas4 жыл бұрын
decade is ending too..
@patmald4 жыл бұрын
@@rrafixas wrong.
@sgt.lincolnosiris41114 жыл бұрын
@@rrafixas this decade is ending. New one us just about to start!
@anonymousfox3454 жыл бұрын
i think next year should be the second year of the flex
@patmald4 жыл бұрын
@@sgt.lincolnosiris4111 a decade can start whenever...
@smooth_ops29424 жыл бұрын
"I knew that was going to happen" 20 seconds later: "Sorry drag race people I didn't think that was going to happen" ME: 🤔
@sherwyn25814 жыл бұрын
I’ve been getting a hella old LZ vids recommendations on KZbin lately
@alexmedved62054 жыл бұрын
same, just got an old Webisode recommendation
@Sauerbrew7774 жыл бұрын
Happy Thanksgiving! This year of content has been amazing! Hope the rest of the year goes just as well! I bet 2020 will be the year of the Super Flex! Edit: I love that you're doing a drag build! It's definitely tough on parts, but once you get it figured out and make a killer pass, it's all worth it!
@rambo95994 жыл бұрын
Blows engine fixes it. Goes to track blows diff. Love the build
@PrayerOrb44 жыл бұрын
Mr_Jaggerbomb Forgot the input shaft haha
@rambo95994 жыл бұрын
PrayerOrb4 you’re right I did forget the input shaft. Will this car ever not be broken. Find out next time on adam try’s to build a burnout/drag car
@TakenBaconftw4 жыл бұрын
tends to happen when you take a car that is rated at ~300whp and more than double the power
@hugogonzalez1654 жыл бұрын
370z motor blows... Adam: were gonna fix it in one day Driveshaft and diff breaks... Adam: we don’t have the parts to fix it in one day
@EliteSniperTV4 жыл бұрын
Zeroy is just perfect I laugh more every damn time
@dariok91184 жыл бұрын
Man these tires hook way too hard for this drivetrain 😂
@scottm60184 жыл бұрын
Did make me laugh when he said that they wrinkle up to absorb it lol, yeah right 😂
@osamabinlackin4354 жыл бұрын
You should make an announcement when you’re going to the strip, would love too see ZROY rip soon
@RAPIDNISMO4 жыл бұрын
ADAM STOP BREAKING ZEROY Edit: also Adam stop using launch controll as all it does is damage. You can pick up your dad in the s13 or s15 Also happy Thanksgiving even though I'm british
@lrj72034 жыл бұрын
Like it when u are so honest and real. Not scared to show your bad moments. Keep it up and stay with your feet on the ground or in your case on the pedals
@timvanbriesen89164 жыл бұрын
#AdamLz #Zeroy Hats off to you for trying your hand at a whole new motor sport that can be quite brutal. Seriously thought front to back immediate problems I can see, and other things that I believe would help prevent future carnage (I grown up with drag racing my whole life) 1. Polyurethane motor mounts (or something to stabilize the motor more) 2. Bigger, Better transmission cross member with a poly mount. The cross member needs to connect the two frame rails, and it can't just bolt to the floor pan. Look at how the Burnout Kings in Australian reinforce their chassis (box and solid weld every structural joint/component possible) and apply this knowledge to your car build. (High rpm launches tend to cause stress fractures in sheet metal... spot welds will break, sheet will literally rip apart. ) Drag racing is a fight against the clock but also extreme shock loads and torsional twist to virtually every component of the car, anything you can do to mite gate or eliminate that is a step in the right direction. 3. All the rear suspension needs to go... If Zeroy really hooks and the drive train holds, it will start pretzeling all those little chamber arms, upper and lower swing arms, traction arms, toe arms, and the cast parts will crack and break from the extreme shock loads. I don't think you need bullet or titanium parts by any means, but something stronger than stock. Coil overs YES at least on the rear, so you can adjust it for the launches. Bigger sway bars do help despite what every one says "It's dead weight!" it helps mite gate the torsional twist of the rear end suspension, helping the car to drive straighter making your life easier. I would try and avoid solid mount bushings and seek out poly mounts when ever possible, they are more forgiving and less likely to break components. 4. The pinion end of the diff needs support. Pinions try and climb when launched hard, this is why the back of the case is broken. The nose off the diff climbs because of the directional change of torque (it was going straight thru the drive shaft, than the diff trys to tell the power "It's time to make a left and right turn to the tires" so you can use it. This is why the car squats (ideally the car has little to no squat... Watch the Australian drag cars, they are really good at accomplishing this.) Simply put the suspension along with the diff is literally trying to do a back flip under the car. The old school solution was called a pinion snubber ( a rubber bump stop at the pinion end of the diff... this can be very harsh and the floor boards need to be properly reinforced to with stand this solution) The more modern solution is a torque arm. (I'm not going to try to explain, lots of science and this message is long enough already, it is very do able if you take the time to do it right) I would like to end by saying this "I personally would call the AMS GTR Skyline guys and see what they suggest as some suspension parts interchange with the 370z and they mite have some good advise." Thanks for taking the time to listen. Best wishes.
@wadestewart9014 жыл бұрын
Drag race car needs a live axle. Ford 9" for the win!
@R3v0lv3rEesti4 жыл бұрын
Nice E46 M3 there 2:05
@Corvilux4 жыл бұрын
Great content! Sorry about the diff/driveshaft... listening to everyone pull their feet off the track while pushing the Z back though was pretty funny... Happy Thanksgiving! Hope to make it out to the open house !
@TheNinjaMonkey434 жыл бұрын
Correct me if im wrong, but i thought you were supposed to use radial tiresnfor manual cars, and bias plies for automatics. The reasoning i was told was because the radials will spin and take some stress off the axles and diff in a manual car. And in an automatic you can get away with bias plies cuz they hook harder but the torque converter slips and doesnt put as much shock on all the drive components.
@jsomething24 жыл бұрын
nah, that's backwards. radials have stiff sidewalls that shock the drive train in a manual and the impact breaks shit. the soft side wall biasply slicks take the shock out of the gear changes. autos have a high rpm stall converter that slips and takes the shock out of the drive train, so it doesn't matter
@garrett5914 жыл бұрын
What color is the chaser No veiws 48 likes Edit: when it blows up billet block
@blitz36074 жыл бұрын
@Jeff Butt he should put something like a 4l80 in it
@garrett5914 жыл бұрын
Jeff Butt yeah ik thats why he should go billet everything so he can beat leroy
@blitz36074 жыл бұрын
@@garrett591 leroy is a cage with 1300 HP its gonna take some hat tricks to beat leroy
@garrett5914 жыл бұрын
Blitz ik it was a joke I’ve been watching cleetus since before he got leroy so i know all about it
@Sp00kq4 жыл бұрын
Yea KZbin is constantly drunk
@jimmyburch62244 жыл бұрын
You should look in to the slipper clutch like Cletus has now.
@MrDrBlahh4 жыл бұрын
It is mainly a burnout car, i doubt a slipper clutch would be the best for that.
@jakegoldberg89414 жыл бұрын
Michael morales did u watch the part of the video where he said its prob gonna be a drag car instead
@jimmyburch62244 жыл бұрын
It would still work for both
@MrDrBlahh4 жыл бұрын
@@jakegoldberg8941 Oh, i apologize. My dumbass didnt even notice that. Well if that is the case, hell yes to a slipper clutch
@eddominates4 жыл бұрын
6:45 "All these cars look slow" haha idk why that part made me laugh so much
@noahlowery19674 жыл бұрын
I actually really appreciate this series. This is how it’d be for the VAST majority of us if we took on a project like this. We’d have to go for an affordable and often times wrecked/salvaged car and do things quickly/cheaply. These are the issues and brick walls you run into with a build. Keep on with this beast🤙🏽
@villaconception4 жыл бұрын
I would never have these problems with my stock saturn.
@daldrete014 жыл бұрын
Adam: * enables launch control* Drivetrain: Aight, imma head out
@TeeeRoyJenkins4 жыл бұрын
@adam lz for future reference at the drag strip if you have a pass like your first one please please please just pull over to the side right away and have them check if anything is broke and leaking. If you cracked a rear diff case or trans case you would have just drug oil allllllllll the way down the track costing a very time consuming clean up. It's a courtesy thing!
@jm1028974 жыл бұрын
you should make a video of your 335i and it just sounds so good with the exhaust and the pops it makes and your 240SX S13 just sounds so good with the exhaust and the pops it makes and i love the pop up headlights and you should make some videos of driving racing drifting drag racing and dyno videos of all the cars that would be sick and you should make some videos of doing tail of the dragon with all the cars that would be sick and you should make an update video on all the cars it has been awhile lol
@josephsalame62394 жыл бұрын
Adam: gonna have to pick another cool car to pick him up in. Must be nice....
@xRSAkingx4 жыл бұрын
I thought the same thing! Hmmm GT3RS, S15, S14, Supra, etc. 🤔
@vanessamckinley3354 жыл бұрын
I may be a girl, but I think it’s time for a billet block and some internals 🙏
@jtsgarage93894 жыл бұрын
Your just going to have to have built everything with that car haha. I never ran my cars g35s and 350z higher than 3-3500 rpms off the launch and I just ride out the clutch to keep it rolling and not spinning or breaking stuff as far as stock goes, but I never ran mine in the 700hp range either lol looks fun keep up the rippin also I did have one cd009 that didn’t shift as quick as my other ones, not sure why that was besides it had the stock gear oil in it, and with my other ones it’s either Lucas racing gear oil or a mixture of Lucas and normal weight and that way it shifts better when cold.
@Riffrshittr4 жыл бұрын
my favourite thing about adam is that as much as hes a bonafide drifter i love how he does other disciplines of racing especially that he shows it as content and i love the stance and look of the z with those drag wheels
@raymondkoenen89574 жыл бұрын
Building up quite a nice montage of Zeroy breakages 👌
@JoseLuis-nj3ib4 жыл бұрын
Adam needs to hit the drag strip more often👀
@vandersgarage46824 жыл бұрын
Happy Thanksgiving! If you're going to gear that car to burnouts and drag racing, ditch that manual and get a Powerglide to drop in. You'll go faster and it's better for burnouts.
@whatsBF34 жыл бұрын
"it doesn't like to shift quickly" if your referring to when you let the clutch back out and it doesn't engage quick enough does it have a factory helper spring on the clutch pedal you need to take off?
@jaredanthony80704 жыл бұрын
Adam just start with putting a 9 inch rear end from like g force or someone lol dont even bother with another z diff 😂😂😂
@ifaz40294 жыл бұрын
Adam: “No ones faster than Zeroy” Leroy: hold my beer
@craigthornton81544 жыл бұрын
I love the amount of things Adam does in one video . The man is grinding
@r32dorifto4 жыл бұрын
Hard to believe that there're places on earth were you can (sort of) legally drive cars like that on the road. You got lucky, lads!
@marcs9904 жыл бұрын
9:10 u can just hear it tearing itself apart 🙈
@AaronUnknownPerformance4 жыл бұрын
My face when you said you was gonna run a 10 🙀
@elmoz1224 жыл бұрын
You’re going to keep blowing HG in the car. You either need a billet block, or Darton sleeves to keep the cylinders from distorting. Then your input shafts become questionable when trying to make a 1000whp plus. After that you might want to consider a stand alone when you’re approaching those power levels or a really good tuner and switch over to Ecu tek.
@BlaserBuilds4 жыл бұрын
That drift leg will break stuff every time. Use hand brake to preload and don't worry about "hard launch" until you're used to slipping it. Start at like 2k and drive it off the line...
Launch control broke before..."I think I'm going to use it again" crazy! Lol doing the same thing and expecting different results.
@fabini144 жыл бұрын
@@islandnite77 last time he broke the engine not the trans, trans broke because clutch kick.
@lb9gta3074 жыл бұрын
He broke the trans, the diff, and the drive shaft. Still has the axles for it to be the entire drive train
@lefunghi61514 жыл бұрын
You’ll get there eventually Adam! I remember when you did you first tandems and look where we are now. One year and you have a killer Z and you’ll be good at drag racing! Can’t wait to see that happen :)
@CapeRoadsPOV4 жыл бұрын
You need subframe and diff bushings along with a Bell Raceworks diff brace to be able to launch it. Do all of that and you'll be good, the axles will handle it!
@blasterwayne64 жыл бұрын
Need to invest in an ice machine my guy
@owen_0034 жыл бұрын
Before watching, I predict 1/4 mile of 9.7 secs Edit: Turns out it was 21 secs 😂
@kennethsev72434 жыл бұрын
Owen Page way too low maybe high 10s
@JimmyBreedlove4 жыл бұрын
Kenneth Sev How so? Auto Mafia Racing just went 9.7 sec 1/4 Mile in their 650WHP Single turbo 3.7 mustang at Cleetus & Cars
@EroticMotionShufflin4 жыл бұрын
Jimmy Breedlove because Adam is a drifter not a dragster, maybe Cleetus can Make it run 11 but Adam is going to run 12 - 13 all day I’m this thing with how much experience he has and plus his set up is too weak for drag he took a 600 hp car on a sticky track with a drivetrain only to handle 300
@JordanBennett198294 жыл бұрын
@@EroticMotionShufflin cleeter will get it to a 9
@JordanBennett198294 жыл бұрын
Assuming it didn't break
@yellowha20114 жыл бұрын
Make the 370 an actual drag car it would be sick man. Put a slipper clutch in it just go balls out man. Happy thanksgiving Adam
@maxpower81704 жыл бұрын
It's okay Adam, you are just figuring out the car and the weak points. However, It is pretty cool seeing you drag racing man! I can wait for the next Zroy videos
@CRanch__1984 жыл бұрын
the Christmas tree in the back ground at the start looks so sad :(
@JackTheDruglord4 жыл бұрын
21 second pass! Finally a car my old MX-5 would have been able to smoke.
@Drake51534 жыл бұрын
Can't say I didn't see that coming, but great to see the Z up and running again! Here's hoping the day will come when it can handle a proper beating.
@Island_Times4 жыл бұрын
Do the Aussie thing and put a Dash Mat on the dash to cover the exploded air bag (essentially its carpet , lol . you can buy them pre made in Australia, RHD though)
@JamesPTRSN4 жыл бұрын
the shulminator at the end made this whole video LOL had me DYINGGGG
@PgamerTBP4 жыл бұрын
Launch control 2 Zeroy 0
@JonahSRT4 жыл бұрын
Maybe it would be worth getting a clutch that isn’t as harsh so it doesn’t grab as hard. Would potentially make it easier to slip and prevent u from breaking stuff.
@n1f1sniper4 жыл бұрын
My new favorite car on this channel and it breaks literally any time it tries to do sick stuff. Oh well atleast it looks cool.
@nathaniel.h76584 жыл бұрын
haven’t been this early since calvin had his lexus 😂😂
@Loud_ISF4 жыл бұрын
Nathaniel. H wait a minute
@TASTYTREATSPLS4 жыл бұрын
I don't have a Lexus
@kylepreston67404 жыл бұрын
Nathaniel. H wrong channel dude
@xillafade4 жыл бұрын
This isn't tj hunts Channel dude lol
@nickgriffin42844 жыл бұрын
Kevin had the Lexus. Not Calvin. You’re all fucked up
@theedge001234 жыл бұрын
Adam, that is a stock car, of course it'll start like a stock car 🤦♂️🤦♂️ 😂😂😂😂
@GevXander4 жыл бұрын
Its crazy how fast the builds move on this channel, other KZbinrs take months to change a radiator.
@guidoheeling11794 жыл бұрын
Cleetus had the diff breaking issue for a long long time, i think it is the better to spend the money and upgrade it or do something special like a zr1 diff or something, rather than just to replace it.
@islandnite774 жыл бұрын
Vin Diesel, " you never had your car!"
@JamDrifts4 жыл бұрын
My morning has been made!
@garrett5914 жыл бұрын
Miles Daugherty your night has been made
@lukewood26624 жыл бұрын
1:46 Dude, *IS THAT A SUPRA?!!*
@WildekGaming4 жыл бұрын
Not sure if it will work with the Z, but you should talk to Cleetus and see if you could install a slipper clutch, a similar one to what is in Leroy.
@ThatSkylineDude4 жыл бұрын
Z1motorsports.com bro get the high cap. Diff and everything else you’ll need.
@JoshC034 жыл бұрын
WHAT TIRES IS HE USING? They hooked up like crazy!
@BlaserBuilds4 жыл бұрын
If that's going to be a dedicated drag car you'll most likely continue to struggle to go fast with that trans and rear end combo. Top of 4th gear will only be around 115mph, and the CDxxx isnt 1:1 until 5th gear. You need to run through almost 5 gears to run anywhere close to your goal of 9s or 10's, but 1/4 of the time you're goin down the track you're in between gears.
@3mrx2994 жыл бұрын
Adam: *messing with the LC* Zeroy: ah shit, here we go again
@stevestumbaugh4 жыл бұрын
He be flexin. Adam is like, so we could not make a pass in my 600hp stock drive train 350Z so lets drop 20k in to it so we can make it down the drag strip.
@ludicrousfilms6354 жыл бұрын
It would be really cool if you made a professionally filmed street drifting video. You could make multiple videos with different cars and it could be really dope!!
@marcs9904 жыл бұрын
5:40 LOL 😂 erm I think not. I just think you didn’t do you’re calculus on this one guys .......
@paynekaufmann4034 жыл бұрын
seeing you drive this on the street is the coolest thing ever
@luis1898bebo4 жыл бұрын
Damn adam your the only one that I have heard that broke trans,drive shaft, diff your definitely taking all those parts to there limits in a very strange manner brother lol
@stephentaylor73144 жыл бұрын
You heard it here first !!! Adam in Zeroy and Cletus in Leroy ... Rocky Mountain race week 2020. Like if you want this to happen !
@MikeK9054 жыл бұрын
looks like the diff needs to be braced from rotating with the wheels! From the looks of it you took off with so much force the diff swung back into the crossmember behind smashing that housing and ripping the driveshaft apart! great video tho! Love that tt370z!!
@Brother2Jis_27s44 жыл бұрын
I like when ish breaks, I find it entertaining... Must be on the right track...
@driftslutt21664 жыл бұрын
I’ve had stud on diff snap in half in rain ruined everything
@tuned_tunas4 жыл бұрын
It's not you Adam. That Nissan & Infinity platform naturally have a mushy brake pedal feel.
@noahpletcher23454 жыл бұрын
You should do a car count soon 😂 I’ve lost track of them all
@WelcomeToTheMadness4 жыл бұрын
Happy Thanksgiving. No the men, don’t do all the cooking. What bizarro world are you living in good sir?
@HoweDoYouDo19994 жыл бұрын
3:13 she can’t even focus on grocery shopping no more 😂 she just wants to know how this passed through inspection 😂
@LS__8124 жыл бұрын
She's like "dafuq?!?!"
@schit4brainz4 жыл бұрын
Florida doesn't really have vehicle inspection or emissions. There are only a couple reasons a vehicle would have to be inspected. Here in Arkansas there is no vehicle inspections or emissions at all.
@HoweDoYouDo19994 жыл бұрын
schit4brainz and it’s should stay that way I’m tryna keep the internal combustion engine alive 😂
@vincentsunday31744 жыл бұрын
love shulmans laugh haha, youll get the dragging down soon adam:)!
@aarontash4 жыл бұрын
Drag car... I called it 😊 I said on one of your older video it'll end up being a drag car
@houchin344 жыл бұрын
dude, there are these shacks all over the place in florida called "twice the ice" that is substantially cheaper than everywhere else, and they give you more. look into it