How to Bleed an ABS Brake System - Step by Step!

  Рет қаралды 528,083

2CarPros

2CarPros

Күн бұрын

This is a video tutorial on how to bleed an ABS brake system. Air can get trapped up in the valves of the ABS system which can't be in the system for it to work properly. So we need to get that air out using a scanner to open and close the valves. I will show you exactly how to do that. Thanks for watching!
MK 808 Scanner: amzn.to/3hAH8FQ
Instagram: / ryansgarage408
If you have a car question ask it completely free at www.2carpros.c...
Video by: Ryan Lavacot
*Disclaimer: Please use all safety precautions

Пікірлер: 320
@trick58
@trick58 2 жыл бұрын
Thank you for the video. I let my Chevy Stepside sit for 6 years - the 350/5.7L engine fired right up! Love that engine even with 270k miles. But the brake pedal went to the floor. Topped the empty reservoir and tight pedal until powered up. Figured the ABS module was dried out. I don’t own a $500 module reader, so took it to Meineke. Thank you for confirming what I didn’t want to do!
@Grizzle400
@Grizzle400 Жыл бұрын
How much did they charge you?
@trick58
@trick58 Жыл бұрын
@@Grizzle400 Didn’t leave it with Meineke - they put me off 8 days. Went to my usual Les Schwab and got new brakes all 4 and I think it was $480? Long time ago now.
@Grizzle400
@Grizzle400 Жыл бұрын
@@trick58 dang, yea i have a 2013 Ram 1500 with a bad Abs control module. Code C2200, and i was hoping this could possibly be the solution but I doubt it.
@stephenrose8188
@stephenrose8188 Ай бұрын
Nice easy video to follow thank you. When you showed the shot of the '67 Camaro at about 6.00mins in the flexible brake line looks as though it is touching against the suspension control arm / radius arm, it could chaff and cause a leak, you've probably fixed this but thought it was worth mentioning.
@2carpros
@2carpros Ай бұрын
It's not, just an illusion of the camera. Thanks for watching Stephen!
@ProfessorDavidBower
@ProfessorDavidBower Жыл бұрын
Can you use a power bleeder (pressurized) with procedure and not have to pump the brakes?
@cosmokenney
@cosmokenney Ай бұрын
This. I am wondering the same.
@ProfessorDavidBower
@ProfessorDavidBower 28 күн бұрын
@@cosmokenneyglad to see your reply. The answer is yes. I did it this way on my ford.
@cosmokenney
@cosmokenney 25 күн бұрын
@@ProfessorDavidBower Thanks.
@jonkadela878
@jonkadela878 3 жыл бұрын
excellent video. I also knew nothing about the ABS bleed method. btw, I have always used clear tube at the bleeder so I can see air bubbles and fluid color.
@2carpros
@2carpros 3 жыл бұрын
Thanks for watching!
@tucobenedicto1780
@tucobenedicto1780 Жыл бұрын
Thanks for the video. I changed the master cylinder on my 2008 F-350. I couldn't get the brakes to bleed no matter what I did. Only air ever came out. Very frustrating. Will try this next using my scanner.
@PeterGatto-g7i
@PeterGatto-g7i Жыл бұрын
This is a very informative video but will this method work if the ABS is not currently working? I had to open the brake system on my 2008 Impala and could only get 3 out of 4 of the lines to bleed. BTW. The wheel that wouldn’t bleed was the one where I replaced the caliper (left rear).
@billsteil8002
@billsteil8002 9 ай бұрын
Yes the values need to be opened in the ABS pump. Don't use a vacuum bleeder you will damage the ABS pump.
@VincentEsquiveljr
@VincentEsquiveljr 5 ай бұрын
I have never subscribed to anybody's channel ever in my life just period but on behalf of the easy n simple fact that you are literally the only person that I have ever witnessed doing a video n was cool enuff to let us know exactly what time to skip forward to just to get straight to the point im most definately subscribing to ur channel everybody else that I watched makes u watch da whole dam video with a bunch of bullshit in the mean tym between tym..anyways thanx 4 not wasting our tym n u being honest is why u r my 1st subscription period more people should do that
@2carpros
@2carpros 5 ай бұрын
That's amazing! Thank you so much for subscribing!
@muhammadkhair9024
@muhammadkhair9024 2 жыл бұрын
Hi! I been noticing a weird safety issue with my bmw f20. Whenever I braked hard, my steering veers to the right, an indication my left front brake is not functioning well? A quick trip to a workshop ends up in both front left and right rotor and brake pad change. However when the mech tried to perform a bleeding of front right brake, he said it was not bleeding well enough. After many attempts he decided to check on my abs pump. He disconnected the line out from abs pump to front right, and upon pressing the brakes, little brake fluid seems to be coming out of the abs pump supplying to front right. Is this a sure tell tale sign of faulty abs pump? Or should I carry out the wiring test as shown by you guys
@2carpros
@2carpros 2 жыл бұрын
I suppose an air bubble can get in the module and make the right not work like it should. It is worth a try. Especially if the ABS has activated a bunch recently. Thanks for watching!
@gregbriley8328
@gregbriley8328 Жыл бұрын
thanks for your help. i did purchase the mk808. bleeding the brakes im only getting the brake pressure test, not the bleed left front, right front , left rear , etc. is there a download im missing? the petal is very soft. your new friend Greg.
@justinparker1827
@justinparker1827 2 ай бұрын
Does the mk808 scanner also work for vehicles with a VSA system, such as an 06 honda pilot?
@rachelcarlton7753
@rachelcarlton7753 Жыл бұрын
I purchased this scanner after watching this video. I recently replaced an HCU on a 2018 dodge ram and when I tried doing the ABS bleed after that, the system only cycles through the right front and right rear and then says test complete. I contacted the company that makes the scanner but they weren't very helpful and didn't have a definite answer on why it is doing that. Just wondering if you know if this is how some abs system bleeds work or is there any issue with the software for this vehicle?
@riskfreesolutionsforbusiness
@riskfreesolutionsforbusiness 4 ай бұрын
dont you just love it when every one else gets an answear except you , ignorant or what. but m8 dont worry ive just bought exact same scan tool going do abs auto bleed tomorrow ill let you know if it only does front right and back only . or all 4 . im doing it on a 2003 jag stype.
@Teddy-s2j
@Teddy-s2j Ай бұрын
I saw where several people had replaced all brake components prior to bleeding system. One thing I saw no mention of is that all rotors need to be trued when new . They are not always true when new and that will cause pre mature wear on new pads . And if you are just replacing pads the rotor is just like the surface of a cylinder in a motor. They need just a bit turned on a brake lathe or they will just also eat up new pads.
@karlzrli
@karlzrli 2 жыл бұрын
Thank you very much for the video. Just to confirm, by attaching the scanner and follow the instruction for all four wheels, did we only bleed the ABS system as per the scanner, and we will still have to manually bleed all four wheels again by the traditional way? Or did we actually achieved bleeding both the main system, as well as the ABS system?
@2carpros
@2carpros 2 жыл бұрын
For me it worked and bled the entire system, BUT I would check after the ABS process and make sure you have a very firm pedal. If not then bleed like normal. Thanks for watching Karl!
@sethfrazier828
@sethfrazier828 2 жыл бұрын
If you don’t manually bleed the system afterwards then you would just be sending the air bubble somewhere else in the lines, I would assume at least
@karlzrli
@karlzrli 2 жыл бұрын
Thank you guys!
@denbleygv9238
@denbleygv9238 14 күн бұрын
There's no need to pump the brakes while doing this with the scan tool? I'm replacing my abs module off a 15 yukon.
@larryolund5544
@larryolund5544 2 жыл бұрын
I own a 2020 Jeep Wrangler and I am having problems with spongy brake peddle When I purchased the jeep brand new it had excellent brakes The peddle was firm and quick to respond Now after about 3000k miles I have lost the peddle and they are spongy slow to respond I believe after watching your video that is may have happened after the jeep went into anti spin mode once while off road This is not a problem with just my jeep If you go to the JL Wrangler forum you will see that others have the same problem and the dealer is no help. They say its normal. IT IS NOT NORMAL AND I NEED TO FIX IT I purchased a FOXWELL NT630 to perform the ABS brake bleeding like I saw in in your video with the Autel put it would not perform the individual wheel brake bleed with the ABS pump running What it did do I think was open inlet and outlet valves and run the ABS pump so I did bleed the brakes several times opening the valves and running the pump This did improve the peddle by 50% put I can still tell there is air in the system All this to say do you know if the Autel will run an individual wheel ABS brake bleed like seen in your video on a Jeep Wrangler JL 2018 to 2021 Thanks for your help Larry
@2carpros
@2carpros 2 жыл бұрын
Excellent diagnosis it sounds like you are 100% correct. Off road use with ABS can absolutely get air in the ABS system and cause that problem. It did on my 2005 F150 I can't imagine it wouldn't on your Jeep. I'd order it Amazon and see if it works, if not return it, if it does hang on to it. Thanks for watching!
@larryolund5544
@larryolund5544 2 жыл бұрын
@@2carpros Thank you and Thank you for your video I have been an auto technician for over 40 years and never heard of ABS inducing air into a brake system and I did not think it was possible until I say your video What you said about a master cylinder makes sense PUT the engineers need to figure out how to stop this from happening Despite what the dealer said I new there was something wrong and was determined to find out what and fix it I get the Autel MK808 on Friday and will bleed the brake again and I am sure this will fix it and then I will share your video with the Jeep JL Wrangler forum with an explanation on how I got to this point and how I fixed it Keep up the good work Thanks Larry
@ColdWarVet607
@ColdWarVet607 Ай бұрын
Nicely done but the brake fluid level will most definitely drop. Bleeding one wheel for 75 seconds I would think based on having done this manually you may empty the Master Cylinder or to the point air gets into its piston, thus needing to remove the MC and do a bench bleed. The wierd thing for me is my scanner doesnt say to open any bleeder valve. It just runs the ABS bleed and says nothing? Got a 2003 Impala with a 3800. MY scanner a high end launch is up to date with the latest GM distribution. Gonna try again. Thanks!
@donr868
@donr868 12 күн бұрын
Is it worth doing this procedure with a pressure bleeder attached?
@necrosbillsibub4650
@necrosbillsibub4650 2 жыл бұрын
I have a 1990 ford ranger and I just replaced the hydraulic abs assembly, bled the brakes and still feel like I have air in the system. I asked my mechanic friend and he said bleed the abs assembly, I found a spot for a bleeder tube and all, I don’t have the fancy computer stuff newer vehicles have, just bleed the abs from the bleeder screw on the abs assembly?
@ajcaiati
@ajcaiati Жыл бұрын
Excellent video. I put this question in a reply. So the bleeder valve is open with the hose in brake fluid so it cannot suck air back into the system. Close the valve when the scanner says to close the valve and move on to the next wheel. I drive a 2010 Toyota Tundra, this tool you recommend will work for the Tundra as well? Thanking you in advance, Anthony J
@davidgarris8006
@davidgarris8006 Жыл бұрын
This is a question can this be used to bleed the ABS module itself and then do the brakes
@marlo916
@marlo916 3 жыл бұрын
dont forget to keep the brake fluid reservoir topped up with fluid while pumping
@ronaldscott781
@ronaldscott781 Жыл бұрын
Very good video!! I’m Using an MK906BT on a 2002 Tahoe w/soft pedal after caliper replacements. The abs bleed procedure doesn’t prompt me to open any bleeder screws. Seems to me that it won’t do any good if the air isn’t allowed to escape. Any thoughts? I’m going to have a helper open each corner in succession and try again.
@mikehannigan848
@mikehannigan848 Жыл бұрын
you probably figured this out already but it sounds like you were using the bi-directional testing function of your scan tool and not the abs bleed function.
@Timemachine69
@Timemachine69 9 ай бұрын
In the case, the air will be pushed out the and module to the brake lines, then do a regular bleed to remove the air from the brake lines
@ecigaccessory4792
@ecigaccessory4792 2 жыл бұрын
I have a 2011 jeep grand Cherokee Laredo with a 3.6 L, what I need to do the same thing to it? I have a soft pedal and I just change the master cylinder but I still can’t get it to break properly
@KietNguyen-up9vx
@KietNguyen-up9vx 3 ай бұрын
Hello, I am planning on disassemblying my abs module tomorrow on my 2014 honda accord because I need to replace it. What if I don't have the money for a scanner good enough for this function? My current scanner is a launch X431 creader VII+ and I know for a fact that it doesn't have the function. Is there any way to manually do it?
@ajcaiati
@ajcaiati 5 ай бұрын
I made my purchase after watching your video. I have a question. Is it necessary to update my MK808BT Pro to bleed the brakes again? My one time update has expired on 3-24-24. I made my purchase on 3-24-23. Anyone can answer this question if they know the correct answer. I have never been exposed to these tools while on the job, I'd like to make sure I'm using it correctly. Thanking you in advance, Anthony
@EPHONIC
@EPHONIC Жыл бұрын
I always heard to start at the back most/furthest caliper from the master cylinder. Is that not the case?
@2carpros
@2carpros Жыл бұрын
Yeah it's a good idea. Thanks for watching!
@ernieramos5458
@ernieramos5458 2 жыл бұрын
Will this scanner do a break bleed on 2013 Hybrid Ford C-Max?
@2carpros
@2carpros 2 жыл бұрын
Yeah it should. Thanks for watching!
@lenspears916
@lenspears916 Жыл бұрын
Great video, I have a 96 E350, any idea what scanner might work with a van that is that old ?
@watchmanexpert
@watchmanexpert Жыл бұрын
I replace my read caliper Nissan Titan 2010 and I bleed all the 4 caliper many times 1 quarter in brake bluid , now my brake in stop ligth slowly go to the floor , u think I need to do the abs bleeding?
@danknitz9679
@danknitz9679 2 жыл бұрын
Thanks for the video! Ive watched the one where a snap on scanner is being used and the user doesn't open any bleeders during the abs bleed process. It appears that the scanner dont instruct the user to open them either. Ill be using this same scanner and not sure if i should open them up or keep the bleeders closed during the abs bleed. What do you think i should do? Thanks again...
@ilvxor
@ilvxor Жыл бұрын
Same question here. It should be opened before going through bleeding process with this scanner??
@danknitz9679
@danknitz9679 Жыл бұрын
@@ilvxor the Snap-On scanner that I used did not instruct me to open up any bleeders at first so I did not open any but that did not do a thing for me so I repeated the process opening up one bleeder up front and another one in the back and did the ABS bleed while pumping the brakes and that seemed to help a little bit but I still got air in the system. I did this four times.
@motorcitymadman146
@motorcitymadman146 Жыл бұрын
So will this bleed the fluid for the entire truck when your done. I am guessing 75 seconds of pumping on each line will push all the old fluid out.
@2carpros
@2carpros Жыл бұрын
More than likely. Thanks for watching!
@jsmith3964
@jsmith3964 7 ай бұрын
your good , have a 98 maxima and only bleed left front brake fluid kelp going down after calaper repair, thanks for your video. .looks like i ve got to bleed all 4 don t have the high end scanner ,only blue driver.. i can get it done now due to your help ,thanks,
@SNOW_LEOPARD1
@SNOW_LEOPARD1 Жыл бұрын
I bought the same unit for my 2004 f150 so I could bleed the abs system but mine says vehicle not supported. Any idea why this won't work?
@2carpros
@2carpros Жыл бұрын
Worked perfectly on my 2005 F150. Basically the same truck. I would update the unit. Thanks for watching!
@waltersweet4595
@waltersweet4595 Жыл бұрын
Yes write Autel and get an update
@The_Nomad_Detailer
@The_Nomad_Detailer 2 жыл бұрын
I have a 2000 ford excursion, I replaced all calipers, rotors and pads, Ive bleed the brakes (like normal), I also discovered a brake like with a hole it. I replaced that to. refilled the system..bleed the brakes another 3 times, and I still have a sinking brake pedal. I found out about the abs module needing bleed. I cracked each line bleeding them like a caliper having someone pushing the pedal inside. STILL when its not running, I have a rock hard brake pedal after pumping a few times. but when its running...pedal sinks to the floor before the brakes grab at all. HELP!!!! Do I need a scan tool to do this on a vehicle this old? that will fix my issue? or do I have a bad brake booster?
@JustAlanIsCool
@JustAlanIsCool Жыл бұрын
Master cylinder. 2009 sonata with same exact symptoms. I bled the brakes today (old school way) and got plenty of fluid out at each corner, rotors still look brand new after a couple hours of trying to break the new rotors and pads in. If the booster was bad you wouldn't be able to move the pedal even with the engine running. In other words, no power brakes.
@kristinhornsby9362
@kristinhornsby9362 Жыл бұрын
Thanks, I don't have a scanner replaced MC, all pads rotors bled several times calipers are on correctly. My brake pedal still goes to floor please help would this be a computer issue. Lexus IS250, 08
@humbertoalcocer2173
@humbertoalcocer2173 3 жыл бұрын
Hi, I did all steps but after click hot functions this shows up : the selected function is not supported” any idea what is that for? Thanks!
@2carpros
@2carpros 3 жыл бұрын
Try updating your scanner. Thanks for watching!
@rkymtnrsx
@rkymtnrsx 2 жыл бұрын
At what point did you add fluid to the brake reservoir?
@2carpros
@2carpros 2 жыл бұрын
If it drops then add some after the bleed. Thanks for watching!
@barbaralagowski9393
@barbaralagowski9393 Жыл бұрын
Good video..my problem is no oil going to front right caliper..all other bleed fine. Any idea why
@2carpros
@2carpros Жыл бұрын
Fluid could be caught in the ABS system just for that wheel. I'd bleed it like this video. Thanks for watching!
@wvjeepguy8178
@wvjeepguy8178 Жыл бұрын
It can be a bad brake hose if it has collapsed internally.
@charlesharrell8798
@charlesharrell8798 Жыл бұрын
My brake pedal pulsates when I press the pedal so, I had the entire system flushed for possible air. It didn't work. My ABS light comes on for a while but will go off. 06 caravan 3.3. Any ideas?
@newry123
@newry123 2 жыл бұрын
When the scan tool is doing auto bleed do you need to open and close the bleed nipple or just leave it open till it’s finished’’thanks
@Hedgehog7999
@Hedgehog7999 Жыл бұрын
Open the valve when the scan tool asks, then shut it when it tells you to move to the next wheel
@newry123
@newry123 Жыл бұрын
Thanks
@ajcaiati
@ajcaiati Жыл бұрын
So the bleeder valve is open the whole time the pedal is being pumped?
@95roadie
@95roadie Жыл бұрын
@@ajcaiatino. You open it when it says open. And close it when it tells you to close.
@patriot3431
@patriot3431 Жыл бұрын
@@ajcaiatithe abs module is engaged, pedal not needed until afterwards to verify solid pedal.
@joecox9958
@joecox9958 2 жыл бұрын
What is the difference with normal bleeding procedure? now most cars have ABS. Why I need the scan tool to do it?
@2carpros
@2carpros 2 жыл бұрын
Because this tool open and closes valves in the ABS module where air might be trapped. Thanks for watching!
@golfish8589
@golfish8589 Жыл бұрын
I just replaced abs motor on new to me 2003 Silverado ext ls. Master cylinder looks new. System sat open without a pump for a couple of days. I did suction out brake fluid from reservoir before abs removal so fluid would not end up on the floor. After refilling reservoir after abs install.. Pedal goes to the floor with no pressure or brake fluid leaving the reservoir. I even tried removing the two line from the master cylinder. No fluid would come out the two open lines Whats up? Thanks...
@markellis4851
@markellis4851 2 жыл бұрын
I'm interested in the Autel MX808 scan tool. However I've heard that to calibrate the linear valve in the ASB control I'll need a scan tool that communicates bi-directionally. I believe that would be the 906BT. Is this correct?
@ronatkins3376
@ronatkins3376 2 жыл бұрын
The mx808 just got a new update in June 2022 its now bidirectional. I just bought mine 3 days ago
@arontesfay2520
@arontesfay2520 2 жыл бұрын
Can I do this with the engine on? My battery is dead because I left the car seating for several weeks due to brake issues.
@2carpros
@2carpros 2 жыл бұрын
It's best to recharge your battery with a charger or get a fresh one. Starting the engine while on jack stands or something can make it unstable and I wouldn't want anything bad to happen to you. That being said you could probably do this with the engine on unless the scanner stops you, I wouldn't know I haven't tried it with the engine on. Thanks for watching!
@dtm8073
@dtm8073 2 жыл бұрын
Nice video! I've got a 2016 Silverado 2500 HD, I bought the truck new in May 2016. Every time I apply the brakes on the first push the pedal feels a little spongy but if I let go and reapply the brakes then it feels hard and no sponginess. Every time I went to the garage I'd forget to mention it and now 6 years later it still does it but I got used to it. My wife probably never noticed it because she never said anything about it. I guess I might have air in the system. Am I correct to assume that? I'd actually like to replace the brake fluid since it's 6 years old. Would I just follow this procedure till I see the new fluid come out of the hose? Thanks,
@fcesur77
@fcesur77 Жыл бұрын
Hi! I have exactly the same brake pedal problem like yours. Were you able solve this problem just through abs bleeding system? I am supposed to go to a Honda service I think.
@raulmorel1872
@raulmorel1872 Жыл бұрын
@@fcesur77could be master cylinder or brake booster.
@oysteinfabeng2452
@oysteinfabeng2452 Жыл бұрын
Makes more sense, having a bleeder screw open while running a autobleed of the ABS. Other abs autobleed functions does the procedure with all the bleeders closed…. so where would the air go with pressurized fluid on both sides of the air??
@eap.productions
@eap.productions 2 жыл бұрын
For DIY I have Autel's Mini AP200C Bluetooth scanner. Cheaper upfront and you pay annual fee as you need it per function. I also have a fill bottle upside-down into reservoir and a vacuum pump tool on the bleed screw for one person operation. Any downsides to using this method?
@DJTourniquet
@DJTourniquet 2 жыл бұрын
Only thing I can think of is your fill bottle going dry or the vacuum bleeder not sealing proper on the bleed valve. I know from experience on both lol
@haterskeephatin101
@haterskeephatin101 Жыл бұрын
I always bleed my brakes after changing pads & rotors but these new abs systems cannot be bled without a scan tool :(
@leozevlas4257
@leozevlas4257 2 жыл бұрын
i'm presently battling a soft pedal problem that i'm sure is air in the abs system. your video is excellent and i'm going to show it to a shop that changed my brake fluid and did not do it with knowledge that abs brake systems require this technique you have described. by the way your video use of your camaro shows your brake line is rubbing the frame. one hand washes the other
@hugolizardi1479
@hugolizardi1479 2 жыл бұрын
Same here on my sierra denali lol. I got new front calipers and didn’t realize abs can cause this
@2carpros
@2carpros 2 жыл бұрын
A lot of shops miss this. Thanks for pointing that out but not to worry, it only does that on the lift. When on the ground it is all good. Thanks for watching!
@Steveo_00700
@Steveo_00700 2 жыл бұрын
Will this scanner work on a 2020 Honda CRV for bleeding the ABS system? And does this update through wifii?
@2carpros
@2carpros 2 жыл бұрын
Yes it should and yes it will. Thanks for watching!
@Steveo_00700
@Steveo_00700 2 жыл бұрын
@@2carpros , thank you
@keithnoneya
@keithnoneya Ай бұрын
Really nice video! I kept trying to wipe the scratch off my laptop screen in the middle. 🤣🤣🤣
@bradburrick
@bradburrick 3 ай бұрын
Thank you! Do you still suggest that scanner?
@2carpros
@2carpros 3 ай бұрын
No problem! I'm still using mine, works great! But there is a new version out for the same money. I'd get that one. Newer CPU and interface but the same company. Tech moves fast! Thanks for watching!
@garydeandeery
@garydeandeery 2 жыл бұрын
I did new lines and calipers and I had the car running when I did the bleeding coz then the abs pump is on Is that right
@Sequel7
@Sequel7 Жыл бұрын
The car should be off
@kennylavay8492
@kennylavay8492 2 жыл бұрын
HOW ABOUT THE AUTO BLEED. some show you do not have to open at each wheel. will the auto bleed still bleed all the air from the lines and the pump motor.
@2carpros
@2carpros 2 жыл бұрын
If you follow the steps on screen it will get all the air from the pump, but maybe not all the way out the lines. You might have to bleed brakes like normal afterwards if the pedal feels soft or spongy. Thanks for watching!
@Marsha-nq4wb
@Marsha-nq4wb 4 ай бұрын
Does my car have to be started to bleed for Toyota highlander 2004 6 cylinder? My brother said it has to be started help!
@Ken-1
@Ken-1 2 жыл бұрын
Changed a leaking brake line on an 04 Cadillac Deville and the pedal is still spongy. The rear wheels are both easy to turn with the brakes pressed; the front wheels are barely turnable by hand, much tighter. I bled the brakes at all 4 wheels and no air bubbles anymore but the pedal is still spongy. Do you think it's possible that air is trapped in the ABS module? Or could it be something else? Running out of ideas, just weird how entire system has weak pressure after replacing one line..
@2carpros
@2carpros 2 жыл бұрын
Yeah probably. That can definitely be it. Or if you are truly unlucky the master went out at the same time. Thanks for watching!
@guilhermeferrari2562
@guilhermeferrari2562 11 ай бұрын
Do you know what needs to be done on motorcycles? E.g. Yamaha R3
@riskfreesolutionsforbusiness
@riskfreesolutionsforbusiness 4 ай бұрын
Iif theres air in system will it give false code ie reluctor ring tooth missing along with abs light on dash?
@benjaminabel8596
@benjaminabel8596 Жыл бұрын
My scanner said to bleed the brakes regularly, then bleed them again with the ABS bleed. Thoughts?
@meassavuth4649
@meassavuth4649 2 жыл бұрын
Why I can not find any professional brake bleeding person ? You must write down on the white board from step 1 to the end of step of how to do ,
@robertm1692
@robertm1692 Жыл бұрын
If I'm using a pressure bleeder or vacuum bleeder do I still need the assistant to press the press the pedal?
@2carpros
@2carpros Жыл бұрын
You shouldn’t. Thanks for watching!
@eobardthawne6962
@eobardthawne6962 2 жыл бұрын
Cheaper solution to the autel scanner if you're working on Ford products is a laptop/windows tablet a Bluetooth obd dongle and forscan software. The software is free and can do alot more then just bleed brakes.
@2carpros
@2carpros 2 жыл бұрын
Yeah that will work for Ford products but other makes aren't so lucky. Thanks for watching!
@r.tomascik304
@r.tomascik304 7 ай бұрын
My 04 f150 with a launch 909E has function to open abs valves but my 04 you cannot use the bleed option. It says my vehicle doesnt support that function.
@chasehaynes2438
@chasehaynes2438 2 жыл бұрын
I just bought the scanner. Followed all steps and clicked on brake bleed. When I enter the vin and click on hot functions the only option available is All sensors. Abs bleed is nowhere to be found. PLEASE HELP
@2carpros
@2carpros 2 жыл бұрын
Make sure you have the latest software update for the scanner. I update mine all the time. If the option still doesn't come up you might need to contact AUTEL's customer support. They have great customer support and I would not hesitate to reach out to them. Thanks for watching!
@mwngw
@mwngw 11 ай бұрын
The Rav4 is famous for an inexplicable low, soft pedal after ANY brake work. That includes not even opening up a bleeder at all. I'm hoping this works.
@snowss6890
@snowss6890 10 ай бұрын
Did you ever figure it out? I bled my brakes and the brakes suck now
@mwngw
@mwngw 10 ай бұрын
@snowss6890 ....been battling this for 2 years. Next up, a second master cylinder, bleed again with a pressure pump. Not confident. Really think it's an ABS bleed thing.
@amandamcallister4385
@amandamcallister4385 2 жыл бұрын
Ryan if I buy this tool and follow exactly what it says to do can I do this my self with my husband helping me please let me know thank you in advance
@2carpros
@2carpros 2 жыл бұрын
Yeah definitely. Thanks for watching!
@garydeandeery
@garydeandeery 2 жыл бұрын
I had a engine light come up with a code p0610 Pcm failure tried everything had my brakes bumping so feels like warped disks. So I did all new calipers groves disks pads braided lines but Iv still got the engine light and wobbly disks Mazda wants £2000 for program my ECU after lots of searches had fault code broken down into each number meaning So Hope now it’s a speed/brake line sensor if one is faulty it makes the pedal feel on/off
@arturonava255
@arturonava255 2 жыл бұрын
Hello I got a question is this scanner working for 2009 Dodge ram 1500 please let me know thank you
@waltersweet4595
@waltersweet4595 Жыл бұрын
Yes
@gregbriley8328
@gregbriley8328 Жыл бұрын
in addition to the below comment, i need to add something. in your video you say to click on anti lock brake bleed. well,i dont have that icon. i have automated icon which runs the pump while holding the brake to check pressure im assuming. why do i not have the anti lock brake bleed?
@bradleyworch6742
@bradleyworch6742 Жыл бұрын
would I need to do this on a 2001 GMC Yukon. I am changing the front calipers. thanks
@angelf9800
@angelf9800 2 жыл бұрын
Question My rear breaks calipers are not compressing the pistons even though they are brand new parts can it be the abs that has air in the System. And is it cheaper to buy a use abs module Rather then the scan tool.
@2carpros
@2carpros 2 жыл бұрын
There is definitely air in the system. Getting a new abs module wont get air out of the system. There are cheaper tools that do it, I just can't find any. Thanks for watching!
@angelf9800
@angelf9800 2 жыл бұрын
@@2carpros I am going to order the scan tool and hope it can fix the problem I am having. I paid $300 for this 1999 Honda Accord and the scan tool cost more ☹️
@migueljr245
@migueljr245 Жыл бұрын
Great video . Same issue here Soft pedal hits the floor zero response took to shop they replaced caliper and module paid over $ 300 dlrs such of waisted of money had to tow car from mechanic shop on top of that extra &120 for towing truck. some b sh
@kenworthcustomlogisticstru8096
@kenworthcustomlogisticstru8096 2 жыл бұрын
Will that scan tool work on a 2005 Dodge ram 3500 dually SLT quad cab Long bed with disk brakes front and rear.
@r91motorswelcome79
@r91motorswelcome79 3 жыл бұрын
Honestly was looking for this video and best out there top guy!!!!
@2carpros
@2carpros 2 жыл бұрын
Hey thanks for watching!
@kennethredding4616
@kennethredding4616 2 жыл бұрын
Thanks for the video. My scanner doesn't tell you which wheel to start with, does it matter? Thanks again!
@mickystone9930
@mickystone9930 2 жыл бұрын
I’d imagine you start with the wheel furthest from the master cylinder so that would be passenger rear, driver rear, passenger, then driver
@2carpros
@2carpros 2 жыл бұрын
Yes it does. It should really say which wheel to do. Maybe there is a symbol or something?
@kennethredding4616
@kennethredding4616 2 жыл бұрын
I bought an Xtool A30 Pro, it doesn't instruct anything about which wheel to start with. I started at the right rear, put a clear tube full of fluid (no air) from the bleeder screw into a container with fluid in it. Opened the bleeder and ran the pump, no fluid moved in either direction. I did this on all four, same result. I bled the brakes again manually, still a soft pedal on start up. There's got to be something I'm doing wrong. I appreciate the help here, this thing is driving me crazy.
@lesliereyes2062
@lesliereyes2062 2 жыл бұрын
Hi can this be used for Ford Fusion 2011? The scanner?
@2carpros
@2carpros 2 жыл бұрын
Yep. Thanks for watching!
@mr.sierra4409
@mr.sierra4409 Ай бұрын
I don't have any scanner. Can I do manual?
@barryweaver8833
@barryweaver8833 Жыл бұрын
So I guess the 2nd person is for adding fresh brake fluid to the MC reservoir? I wish this MK808 would work on motorcycles too.
@2carpros
@2carpros Жыл бұрын
Just close the line and add it yourself. Thanks for watching!
@r.tomascik304
@r.tomascik304 7 ай бұрын
Another thing. My front brakes are locked. They don't let fluid return to the master cylinder. I replaced one of the flex hoses and the calipers and the pads but they still stay locked. I'm an automotive mechanic of 40 years and i have never had this problem or have i ever seen this problem. I also replaced the booster and master cylinder. Very,very frustrating.
@mr.sierra4409
@mr.sierra4409 Ай бұрын
Did you find the solution? I have that problem now
@AzizAli-xd2du
@AzizAli-xd2du 2 жыл бұрын
Very well detailed informative video!
@2carpros
@2carpros 2 жыл бұрын
Thank you!
@phil7791
@phil7791 2 жыл бұрын
If you had air in the abs module would it throw an ABS light on?
@2carpros
@2carpros 2 жыл бұрын
Yeah it could. Thanks for watching!
@phil7791
@phil7791 2 жыл бұрын
@@2carpros Thank you! After changing all my brake lines it's now thrown the ABS light on with codes for front and back sensors on passenger side.. I find that really strange that both sensors just die at the same time so thought perhaps it's because I have trapped air in the abs module
@StreetKingsPerformance
@StreetKingsPerformance 2 жыл бұрын
Thank you for the detailed explanation. Nothing I have seen shows that the tool only does one corner at a time.
@2carpros
@2carpros 2 жыл бұрын
This thing works great for it! Thanks for watching!
@MrBchayman
@MrBchayman Жыл бұрын
Really great video, thanks. Question for you: On my 2008 Mustang GT, I've upgraded the front brakes to a 4 piston Brembo caliper which has two (2) bleeders, an inside and an outside. During a normal brake bleed, I bleed the outside first, then the inner on each caliper. It seems to me that the scanner will not know or pick up the fact that I've got 2 bleeders on each of those calipers. Will it matter if I only bleed 1 of the caliper bleeders during the ABS bleed? And do you think it should be the outer or inner bleeder? After the ABS bleed, I would come back and do a regular bleed on the entire system again as I normally replace/flush all of the brake fluid more frequently as I track the car quite often. Thanks again for the great video.
@ThunderAppeal
@ThunderAppeal Жыл бұрын
Dont be an idiot and buy the manual to your car. Stop asking idiotic questions to a know nothing video.
@Lmfrank36
@Lmfrank36 Жыл бұрын
Similar story. 6th gen camaro. Eight bleeder valves. Six piston brembos. Mk808ts. Track/HPDE. GM states inner then outer during bleeding. For you it's a clockwise pattern. For me it's RR, LF, RF, LR. I do all 8 with 4 pumps of the pedal 2x a year and ABS module activation once yearly.
@outsidethelines2162
@outsidethelines2162 3 жыл бұрын
The hero we need
@dawsongreen988
@dawsongreen988 2 жыл бұрын
Did this but got to the vin decoding… for whatever reason won’t decode my vin- 2016 f150
@2fli4dacloudz
@2fli4dacloudz 2 жыл бұрын
What’s the sequence normal bleed procedure, then bleed abs, then normal brake bleed procedure?
@2carpros
@2carpros 2 жыл бұрын
Typically yeah. You'd bleed it, then if that doesn't get the desired pedal I'd do the ABS thing, then if it still feels weird, I'd normal bleed again. Thanks for watching!
@fahedothman4067
@fahedothman4067 2 жыл бұрын
What kind of scan I could buy for that car for a 2012 Fiesta Ford stauber G my abs
@riskfreesolutionsforbusiness
@riskfreesolutionsforbusiness 4 ай бұрын
i think you will all find that it only bleads air outta the abs modul not the actual 4 lines .its not ment to it just activates the valves in the abs unit to push any air out .becouse you carnt get air out in a normal break blead esp if you let the vsystem run out of fluid by accident or whatever.
@twx4184
@twx4184 2 жыл бұрын
I am trying to bleed the ABS brakes on a 2006 Nissan Murano with an AUTEL MS906BT and the scanner states "service not supported"
@2carpros
@2carpros 2 жыл бұрын
Make sure the scanner is up to date. If that doesn't work I'd email AUTEL and tell them the issue. It might be a simple bug they can hotfix. Their customer support is pretty good. Thanks for watching!
@rafaelramos2731
@rafaelramos2731 2 жыл бұрын
Excellent video my friend and looking easy to do. Thk u.
@2carpros
@2carpros 2 жыл бұрын
Thank you! Cheers!
@bearpuf
@bearpuf 2 жыл бұрын
How does one know if there is air in the ABS module and it needs to be bled?
@2carpros
@2carpros 2 жыл бұрын
Usually the pedal will be spongy. Thanks for watching!
@OscarHernandez-rj1dl
@OscarHernandez-rj1dl 2 ай бұрын
On the Alltel scan tool says do left front why did you do the back
@donw3912
@donw3912 Жыл бұрын
What scanner works on older rigs?? I have a 95 F250 with RABS...
@2carpros
@2carpros Жыл бұрын
An OBD1 scanner would work. Just make sure you get the one for Ford. They weren't standardized then. Thanks for watching!
@donw3912
@donw3912 Жыл бұрын
@@2carpros will it talk to and work my RABS hydraulic unit so I can properly bleed my brakes as right now I have next to no pedal and have bled it every way from Sunday with minimal improvement.
@thelsel348
@thelsel348 Жыл бұрын
Seems like a strange order. Don't you normally bleed the longest lines first?
@2carpros
@2carpros Жыл бұрын
Might as well just do the ABS step and bleed. Killing two birds with one stone so to speak. Thanks for watching!
@ad5460
@ad5460 2 жыл бұрын
Thanks for video .Does this code reader work on older models 1998 Toyota ?
@2carpros
@2carpros 2 жыл бұрын
Yeah it would. OBDII came in as a mandate in 96 so you are good. Thanks for watching!
@bobbarlow5580
@bobbarlow5580 6 ай бұрын
U need the engine in on position to bleed the abs valve assembly system???
@2carpros
@2carpros 6 ай бұрын
Just the ignition on. Thanks for watching!
@zanecotton4955
@zanecotton4955 2 ай бұрын
Will this scanner work on a 2018 ram 1500?
@2carpros
@2carpros 2 ай бұрын
Yep. Thanks for watching!
@josepeixoto3384
@josepeixoto3384 2 жыл бұрын
hope you did not crash that car yet... it's just a matter of time, do you know how many times a minute that brake hose rubs against the chassis?
@2carpros
@2carpros 2 жыл бұрын
lol what? It only touches when in the air and no weight is on the suspension and only very very lightly. Trust me it's fine. Thanks for worry about my safety though!
@josepeixoto3384
@josepeixoto3384 2 жыл бұрын
@@2carpros oh ok, good deal, didn't know that; i said that 'cause i have seen and replaced them hoses after seing them chafed through the outer layer and the outer fabric and nearing the inner fabric! i am fanatic,i always look for that specifically; some shops don't always re-route the brake hoses properly after some caliper works; one just needs to look at the extreme measures manufacturers take when routing those hoses,in order for them not to rub against anything on their way to the caliper! but it takes 4 or 5 years to wear a hole through; unless it´s an all terrain driven vehicle; then, it gets really serious, maybe 3 months ..or 3 weeks.
@ravinathaariyarathna6753
@ravinathaariyarathna6753 3 жыл бұрын
Very useful video. Thank you!
@2carpros
@2carpros 3 жыл бұрын
Glad it was helpful!
@fernandoreyes5137
@fernandoreyes5137 Жыл бұрын
The important part bro. Price on this scanner ?
@wvjeepguy8178
@wvjeepguy8178 Жыл бұрын
Roughly $500 depending on where you buy it from.
Should You Bleed the ABS? | Porsche GT4 Bleed and Flush
13:00
Jet Fuel Only
Рет қаралды 21 М.
哈哈大家为了进去也是想尽办法!#火影忍者 #佐助 #家庭
00:33
火影忍者一家
Рет қаралды 127 МЛН
规则,在门里生存,出来~死亡
00:33
落魄的王子
Рет қаралды 32 МЛН
MY HEIGHT vs MrBEAST CREW 🙈📏
00:22
Celine Dept
Рет қаралды 42 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 262 #shorts
00:20
ABS Light Came On, Brakes Feel Fine! What Do I Do Now?
46:08
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,9 МЛН
Awesome - FREE Homemade Car Brake Bleeder -- Brake Flush
5:31
GerrysDiy
Рет қаралды 1,6 МЛН
How to Bleed your Brakes by Yourself
8:45
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 7 МЛН
ABS Pump Failure Symptoms - How To Test And Fix!
4:17
ECU TESTING
Рет қаралды 788 М.
Don't Replace ABS Module Before Watching This | Repair ABS Module for Motor & Valve Relay Error
28:12
Automotive Diagnosis: Cars Repair &Training Guides
Рет қаралды 235 М.
Most Common Brake Installation Mistakes!
13:29
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,6 МЛН
哈哈大家为了进去也是想尽办法!#火影忍者 #佐助 #家庭
00:33
火影忍者一家
Рет қаралды 127 МЛН