2GR-FE Rav4 V6 Mid-mount Turbo - DIY Polyurethane engine mounts v2.0

Рет қаралды 37,221

TEKSMRT

Күн бұрын

Пікірлер: 63

@bejocimahi 4 ай бұрын

I got it bro, more stiffer but soft as stock rubber 👍👍

@TEKSMRT 4 ай бұрын

Stiffer than stock rubber is right. 👍🏽

@apexlyve9050 Жыл бұрын

Omg, you made those motor mounts increase in price by 1,000 dollars

@TEKSMRT Жыл бұрын

🤣 maybe $50 worth. 😁

@SilvaB9430 Жыл бұрын

So you just filled in the empty space with polyurethane to make the rubber last longer or for a stiffer ride?

@TEKSMRT Жыл бұрын

Both, the polyurethane reinforces the stock rubber giving it more support.

@gregorywalsh7120 Жыл бұрын

This causes alot of vibration....it should hav a little flex with it

@TEKSMRT Жыл бұрын

@gregorywalsh7120 - have you tried this product and method exactly? It has minimal increase in vibration. Definitely something you can daily.

@gregorywalsh7120 Жыл бұрын

@@TEKSMRT I have...it's really gives u a stiff ride

@TEKSMRT Жыл бұрын

@gregorywalsh7120 - I daily mine, I disagree. I also have a stiff sporty suspension so I suppose it's all perspective. 👍🏽

@JPizzle4Shizzle85 10 ай бұрын

What if your mounts already have slight cracks?

@TEKSMRT 10 ай бұрын

I would either start with a good oem mount and add the polyurethane or cut it out completely and make a solid polyurethane mount and not hybrid like these. Just make sure to use the bonding primer they recommend.

@buya_pr Жыл бұрын

Is that sand at the bottom? 🤔

@TEKSMRT Жыл бұрын

Yup! Helps make the odd shapped mount stay level while the polyurethane sets.

@brentneahring2797 9 ай бұрын

Im actually about to buy that brand of urethane for some upgraded factory mounts 🙃 do you recall what durometer you got and how was the NVH?

@TEKSMRT 9 ай бұрын

I recommend the 80A High Performance - an improvement on the already great 80A offers more heat resistance and a higher tear rate without adding noise and vibration.

@brentneahring2797 9 ай бұрын

@@TEKSMRT how were the shifts with the stiffer mounts? My cars oem mounts tend to wear and tear too easily and I'm gonna try and stiffen them up cause I can feel the engine/transmission jerk when torquing

@TEKSMRT 9 ай бұрын

With this hybrid poly/rubber mount they still feel more firm than stock but without most of the vibrations felt with the solid polyurethane mounts.

@AFPanduhh83 Жыл бұрын

What did you use on the other side to keep it from spilling out...

@TEKSMRT Жыл бұрын

Duct tape and contact cement. Link to product in video description and there is a how-to video there.

@W.deutschmusik Жыл бұрын

Please can you tell me What did you used

@TEKSMRT Жыл бұрын

It's in the video description along with the website.

@fatality_don7813 Жыл бұрын

My 2azfe rav4 2013 has mount faults also

@TEKSMRT Жыл бұрын

I highly recommend this mod - greatly reduced motor movement.

@carrilloazael92 Жыл бұрын

Roughly how many mounts does one of those cans cover by chance? Just trying ro get an idea how many mounts i need to order lol

@TEKSMRT Жыл бұрын

Really depends on the voids/space in your mount that the poly has to fill. When I did solid polyurethane only mounts, I got 1 can per mount. When I did the hybrid rubber/polyurethane mounts the 2nd time, I got 2 mounts per can.

@carrilloazael92 Жыл бұрын

@@TEKSMRT sweet I appeiciate the speedy response!! Look forward to giving this a try💪

@TEKSMRT 11 ай бұрын

How'd it go? How many did you use?

@carrilloazael92 11 ай бұрын

@@TEKSMRT hey brotha!! I managed to cover 5 mounts fully filled:) they feel very nice and sturdy!! I'm excited to try them once I'm able to move and work on my car💪

@TEKSMRT 11 ай бұрын

@carrilloazael92 awesome! You have an IG or build thread I can follow the progress?

@Thrwy23 Жыл бұрын

What polyurethane did you use?

@TEKSMRT Жыл бұрын

Listed in description 👍🏽

@billcable286 Жыл бұрын

@@TEKSMRTthx

@stevenvoigt7486 Жыл бұрын

qhats the brand name. Not who sold it or a website would help alot.

@TEKSMRT Жыл бұрын

@stevenvoigt7486 - as mentioned above, the website IS LISTED in the video description. www.suspension.com/diymmi

@stevenvoigt7486 Жыл бұрын

@TEKSMRT Again I do not want to know what website it is! why the hell can't you just list what the Product name is?

@Asmw-m5p 9 ай бұрын

Can i use other polyurethane?

@TEKSMRT 9 ай бұрын

I recommend using the brand listed in video description.

@inspirational.videos. Жыл бұрын

Where can I get it to buy?

@TEKSMRT Жыл бұрын

Link to product in video description. 👍🏽

@redjstc9123 Жыл бұрын

Interesting 👏🏾 how's everything so far?

@TEKSMRT Жыл бұрын

A year later going strong!

@Carubines Жыл бұрын

@@TEKSMRTany vibrations?

@TEKSMRT Жыл бұрын

@Carubines very minimal compared to my previous solid polyurethane mounts, I'd say not noticeable.

@luisgonzalezEcotec 6 ай бұрын

Dry time?

@TEKSMRT 6 ай бұрын

Suspension.com says that it's 7 days cure time or 18hrs at 150F.

@Mj3_ed Жыл бұрын

Why?

@TEKSMRT Жыл бұрын

The main reasons to use polyurethane motor mounts is to increase horsepower to the ground, reduced wheel hop and a more responsive motor. The first and foremost reason for firming up your motor mounts using polyurethane is to hold the engine more firmly in place. Often the more pliable stock rubber motor mounts will allow the engine to move too much - resulting in wheel hop and a loss of power. The more extreme version of this is when an owner has increased the vehicle's horsepower more than the stock motor mounts were meant to handle - which is my problem. This can cause tearing the stock motor mounts as well as damage to the engine and engine bay should the engine be allowed too much movement.