2K CLEAR OVER LOW RUSTOLEUM SPRAY CAN PAINT JOB

[@speedokoterefinishnetwork4937]

Dude you absolutely killed it 😇😇😇😇

[@JamesDguy]

Thank you! I still wanna wet sand and do some flow coats with speedokote once we move

[@speedokoterefinishnetwork4937]

Yea sand her down with 2000 grit real nice and then throw on a few more coats of smr1150 and it will keep looking nicer and nicer the more coats of clear you do

[@MrGotenz21]

Are you planning on wetsanding the clear to remove the orange peel? I REALLY want to see just how good this can get!

[@garyny4073]

​@@speedokoterefinishnetwork4937 what point does it end though ?

[@speedokoterefinishnetwork4937]

@@garyny4073 I've herd of some shops flow coating a car 2-4 times until it's close to perfect. 3-4 coats and blocksand, another 3-4 coats block sand again ect ect

[@danielembry5157]

You do great work and I appreciate you posting your progress. Thanks to you I resprayed my hood for my 06 Toyota Solara and used the 2K clear over it. It needs another wet sand and buff but all my friends and family say it looks professional. I'm not so sure about that (lol), but not bad for in my carport out of direct sunlight. I hope it holds up over time. Keep spraying brother!

[@JamesDguy]

Thank you and that’s awesome it’s nice to see others getting good results!!

[@josephlanger3768]

Just found you. Working through some of your videos. I'm really impressed that you are giving people a legitimate alternative to $5000.00 paint jobs. I have been thinking about this myself for quite a while. Paint is paint. If you can spray it on, and you have decent technique, you can get some very impressive results. Obviously a $12.00 can of paint will probably fade or chalk up in a couple of years, but I think you solved this by top coating with the 2K clear. Other than your time, you probably have $100.00 to $150.00 invested in your paint job, and the results speak for themselves. Your car looks great! Good enough for 95% of people! Would love some follow up to see how it holds up in a couple of years. Great job and keep posting!

[@StoneyBrownTV]

Just superb work! Absolutely beautiful! I was waiting on this one. The Rustoleum by itself looks amazing but adding clear just took it up to another level. Be blessed my friend.

[@JamesDguy]

Thank you and your right! 100% on another level now. God bless you!

[@mre912]

Bro, that came out so clean. Wet sand and buff and it'll look like a professional spray gun job. Blessings from Colorado 🤙

[@JamesDguy]

Thanks and I linked a video of me doing that to my wife’s crv in the description but your 100% right! Thanks again for the love! God bless!

[@tonylashmit2613]

Best rattle can paint job I've ever seen!

[@TwowheelJD]

Praise Brother, The car looks amazing. Keep up the good work!!!

[@JamesDguy]

Thank you 🙏🏻 God bless you

[@eeiko321]

That’s awesome how you showcased this. Saving thousands of dollars for people who would’ve thought it be impossible

[@i11u5ion9]

That's a really good job for rattle can. I paint cars professionally and started out with the spray cans back in the day. A lot of work for sure, but keep at it there are a lot of tricks to knock down the labor and time for the same finish. I like to say I work hard till I get smart ;)

[@zacksrandomprojects9698]

Ive been watching you for years now and everytime you paint something I can definitely see you've gotten better and better. Looks amazing. 🍻

[@JamesDguy]

Thank you 🙏🏻

[@ghost.of.aleksz.salad.]

iv been painting with spray cans for 24 years, they can make a amazing end result if you know what to do and get lucky with the chemical reactions, some times paint just reacts bad to the base coat or even on its own coats that are half dried..

[@carrier19781]

LOVE YOUR CONTENT!! I'm currently about to paint my small suv grabber green and decided to pull the trigger seeing how good you make your cars look.

[@JamesDguy]

Awesome!! I love grabber green! I have done so many vehicles that color and with a 2K clear over the top it would be even better! I pray it all works out in your favor! God bless you!

[@EDZEN94]

love your work, been watching for a long time & still haven't mustered the courage to DiY my integra, (also paint cost more here in Australia).

[@JamesDguy]

Yea I have heard they haven’t been good to y’all there on spray paint prices. I’ll be doing my brothers integra soon as well. Maybe that will get you motivated. Either way hope you find a way to get the paint cheaper.

[@sinformant]

I still think you should buy some chopped carbon and try your hand at skinning the stock hood. It'd probably be the very first ep3 with a forged carbon hood and would make for some great content to draw in more subs and views. Maybe even cut some vents in it as well

[@JamesDguy]

Ha you over estimate my abilities man. Appreciate that lol

[@sinformant]

@@JamesDguy nah you underestimate them.

[@sbouaphaphan]

Thanks for posting this video. It answered a question i had about putting 2k clear on rustoleum enamel paint. Im actually currently doing a rustoleum turbo can paint job flat black. Im going to put Speedokote 2k clear SMR-1150 on top with pearl in it. This makes me more confident with my decision to go this route. Lets hope for some great results! 😁😁

[@LTT.Official]

Same exact thing I did waaaayyyy back when I started following you, 5k subs I think. I just used Sikkens clear in a cheap harbor freight gun. Still on the car all these years later.

[@JamesDguy]

That’s awesome! I wish I could use my gun but neighbors love to call me in and they didn’t hear the spray cans lol the compressor is a different story all together lol that bad boy wakes the dead

[@LTT.Official]

@@JamesDguy Check out the California Air Tools 8010, thats the one I have, the thing barely makes any noise.

[@johnmcconnell6294]

You've inspired me to do this on a few cars that I have. Great job man!

[@TheIzzo]

nice, I'd be interested in chrome powder coating or replacing chrome on chrome wheels

[@roderickdewberry9753]

Looks great!! You definitely got some real talent. Your vids are always great!

[@JamesDguy]

Thank you 🙏🏻 All God given and all Glory to HIM!

[@Wilkwayadventures]

Looks awesome! I'm about to do the same process on my Prius, which has been spraypainted a few different colors. I'd LOVE to see you do a full car with the Colorshift, mostly because I'm very curious how many cans it would take!

[@JamesDguy]

That would be very expensive but would be awesome if it worked out well because i have seen it done panel by panel and looks amazing but it takes like 2-3 cans per panel depending on size. You need black base coat, then the color shirt a few coats at least then the 2K clear over it.

[@Wilkwayadventures]

@@JamesDguy it seems like it’s going away, or at least wal mart no longer lists it as available.

[@bazilwreckerloughead]

Looks great. Every time I'm about to spray paint anything, I first shake the paint using my 'Paint Shaker 3000' & I remember where I learned to make it!

[@JamesDguy]

Ha YES!!!

[@amberdamas9455]

LOVE HOW YOU INCORPORATE GOD IN EVERY THING YOU DO SOMEHOW LOVE IT GOOD IS GOOD!

[@juliojreyes6234]

Love these videos buddy. Many blessings to you

[@JamesDguy]

Thank you 🙏🏻 God bless!

[@franchise-pj6ow]

Great Job brotha ! You obviously had the car prepped to perfection prior to spraying it ! JESUS IS LORD !

[@shiftwrenchrepeat]

Looks great man! Learned of the 2k years ago because of you!

[@JamesDguy]

I’ll be honest I don’t remember where I learned or it from but glad I have it now!

[@larylhuntington5398]

Love the car, the color and especially what you did with the back bumper. Also loved the message at the end. You did a great job bro. God Bless.

[@lildno2007]

Great Job. You definitely was my inspiration for rustoleum paint jobs. I learned so much from you ❤

[@RatliffRacing]

Amazing Job Brother. God has Blessed you with cool talent i have been painting cars for 15 years and that paint job is killer. God Bless and keep up the good work.

[@jbynum67]

It is absolutely insane how good that car looks from spray cans!

[@BEubankbuilt]

Looks good! How come u don't use a sanding block how wavey does it look by sanding with your bare hand?

[@JamesDguy]

I did use a sanding block a lot in the video but hard to see in some of them. It’s a foam sanding block and it didn’t work as good as hand sanding and wasn’t wavy. I definitely block sand when doing bondo or flattening. I have used it both ways but prefer doing it by hand on curve surfaces but the roof ended up getting block for the final pass. Didn’t wanna make it too boring so I just speed most of it up. I could have made it far more detailed but I’ll answer as many questions as I can to make up for it.

[@sacul7694]

I know Killeen TX very well. Was stationed at Hood back in 93. You would laugh at my spray can paint jobs on my old 74 nova. Looks killer man!

[@elili8016]

I did this method too, i recommend waiting few days after clear to wet sand it. Also primer before you use regular 2x paint and make sure the car is really really prepped even in the hard to reach places.

[@emmanueln.8020]

You really need to open up a shop. You can help a lot of people out that don’t have a lot of money to spend on a good quality paint job your paint jobs come out Awesome and very professional looking keep it up brother we appreciate it. Great Contant.😎👍

[@apismalik]

pro painter will hate this

[@RealMTBAddict]

Content

[@ricardomiles6826]

@@apismalik I do

[@kais2345]

Probably hard to do this as a shop as the paint will fade within a couple of years (assuming it's garaged and looked after, it will fade much quicker if exposed to sun) and it still takes enough man hours to do all the prep work that it'd not be cheap to pay for. It's more of a fun/cheap alternative if you have spare time and enjoy doing this kind of thing :) All that said, while it's fresh it looks very fresh.

[@DaSesh]

so you cut and buffed this paint job in a previous video and now laid 2k clear on top.. was this done after the buffing and wash or just after the buffing? sorry at work and they hate that we use our phones so can only really watch and listen during my 15 min b reak thanks! god bless

[@JamesDguy]

I didn’t cut and buff it in previous video I just buffed it and in this video I wet sanded and added another color coat then let it dry then wet sanded it again and added clear. I make sure to wipe the car down with wax and grease remover or rubbing alcohol to get rid of any wax from buffing. Hope that helps

[@DaSesh]

@@JamesDguy thank you! For the clarification

[@jamesallen7093]

Iif you guys are gonna paint with rust - oleum get the 4 x turbo ! Has a 10" spray pattern , did my Chevy S - 10 with just 3 cans !

[@Nperez1986]

For the matter of your health and safety PLEASE put on a painter's suit...your skin sucks in more than you think. It's how our Gas Handlers in the military die from skin contact with fuels. Your health is fore sure worth way more than $100-$200. God Bless! (

[@i11u5ion9]

Agreed. Its not just about a mask. Even your eyes will absorb the fumes. Plus on the flip side a nice clean suit will help the nibs and dirt from getting on the finish. Just something about clear coat it likes to pull the dirt.

[@acevedohiram]

She looks even better bro, too clean🧼🧼

[@saxyrep1]

That 2K clear's one of my favorite. Great job! Real inspiring!

[@Nperez1986]

Nice! Enamel and other oil based painted were used in the 50s and 60's...doesn't last as long in the sun. Urethane based products, ie. that 2K clear will last a lot longer and is what modern cards are painted with.

[@i11u5ion9]

Yes base coat, top coat.

[@jeffreyortiz8361]

Yah Bless you! Great job! Keep spreading the WORD! 🙏❤️🙌🔥💪💯

[@Nemo_423]

Much better with the 2k clear, thanks for sharing

[@exerperez420]

Good job brother God bless you and your family Hello 👋 from Puerto Rico 🇵🇷 🙏🙏🙏❤️❤️❤️🇵🇷🖖

[@nikkimonson1970]

you killed it for NOW but I want to see what it looks like in six months and then we'll talk

[@chris01479]

Awesome work. I have got questions. Can I make great finish using with raffle can if I use it inside the spray booth?

[@JamesDguy]

Yes absolutely!

[@mlr080965]

Jumping out of my seat with your technique but you still go great results....more power to ya!!

[@gordiefrench5342]

What master at the rattle can It is crazy how good it can be with rustolem Great job sir

[@GlassWerx]

Car looks great. The color of aj engine bay is color I was thinking about redoing my car in. I saw it in his video before it looks hella good

[@JamesDguy]

Thanks and yea his bay is 🔥

[@GlassWerx]

@@JamesDguy yeah I was really thinking bout repainting my car n that color. But haven't been able to find it locally

[@levienns1796]

Thanks for the video and the message at the end, amen man! So true, takes alot to do that and thank you for sharing God's love through your channel.

[@Vortec.Z32]

I've watched alot of the vids man love it, but I believe this to be the only one where u explain letting the paint aka bade coat cure a few days then wet sand 1k lightly then apply 2k clear. All the other vids I've seen you just directly add 2k on top after base no waiting? Is this somthing new you've learned to be a better overall outcome? And when your done wet sanding do u use wax grease remover or just wipe down with dry rag?

[@camlobesvtec]

Unbelievable transformation.

[@COU51N.Kyle.]

Fresh fresh fresh!! So sick

[@kurtgood2914]

Good job my good friend and thank for sharing this video, God bless you friend

[@optimoprimo132]

You did an amazing job! God Bless you! Your body work and painting through all the stages can be a spiritual meditation. Sometimes God in making us perfect as our Heavenly Father is perfect depending on how many bad life habits we have formed through sin needs to take us through various stages of disposition. He breaks our pride and sinful tendencies in order to give us a new foundation.(derusting tools, hammers, air needles, cutting out rust, hammer forming new panels, butt welding, grinding, fiber glass bidy fill, seam sealer, regular bondo) That is the most painful part of the process as we have to learn to trust the process, humble ourselves and let go of the old and accept the new. Then He can start on the refinement of virtue. (Sanding body fill, filling in pinholes, taping, primer, sanding, base coat, sanding, clearcoat, buffing and polishing)! And if you put in the time and good will or dispositions just as the car comes out stunning so we will come out of the process shining like the stars of heaven and become a light on a mountain for all to benefit! Excellent work!

[@DarkSmokeNinja]

I used duplicolor when oainting my car, but i had no idea Rust-Oleum was this good too. Thanks for the videos

[@5150pistolpete]

Because it is not. Rustoleum is the worst paint, ever! Putting higher quality paint over shit paint doesn't make it any better.

[@michaelm_713]

Awesome JOB!! I’m looking forward to trying to do my own paint on my Civic next month hope it turns out somewhat OK 😂

[@Questionbhv]

Nice Job ! The idea with the Carbon Hood could be good contant to lay some carbonfiber with epoxyresin to have a "carbon look" hood for cheap . Keep it up

[@JamesDguy]

Would be cool but I’m not that skilled haha

[@kortam6065]

Love that you add YESHUA✝️☝️ Godbless you brother

[@kingkobra91yt46]

Brother God bless you 🙏🏻

[@piercewright3811]

You've made me really want to give my bmw a rattle can job like this. You made it look crazy good.

[@zfiddy]

Rustoleom is $18 a can, and that 2k clear is $55 a can! We get ripped hard in Australia.

[@eddiearre]

Damn, I get that for like 5-6$ a can here where I'm at , u guys definitely getting taxed up the a$$

[@JamesDguy]

That’s just plain stupid! I’m sorry to hear this :(

[@darnelleoutlaw3490]

Insane. It's starting to become more and more expensive here in the u s also

[@user-nq1rd8li5t]

2k clear coat in the UK is £26.60 per can 😢

[@leandrocosta3158]

Aqui no Brasil uma lata custa 118 reais,

[@adrianfrankowski138]

I'm very sad, that this type of RustOleum isn't available in Europe :(

[@JamesDguy]

That is terrible and #rustoleum needs to fix it!

[@adrianfrankowski138]

@@JamesDguy Indeed 😀

[@leonidaskalivas4562]

Try montana or flame spray its cheaper and available in Europe its also easier in application

[@robsmithracing]

@@leonidaskalivas4562I use Montana her in the uk

[@optimoprimo132]

Rustoleum might be there under a different affiliate name. As far as base coat goes you might try duplicolor. I bought duplicolor's fleet enamel to paint my truck. I feel duplicolor has a better spray tip and atomizes better than rustoleum. Also I believe the best 2K clearcoats in spray can come from europe if I am not mistaken. I was going to go with the spray max 2k clear but I saw the Car-Rep 2k clear which has indefinite shelf life. The spray max needs to be used right away and has a very very short to no shelf life. In case you want to do separate parts at different times or a mistake happens you need to sand or fix before continuing.

[@GorrillaFastTv]

Bro I been watch you for a lil min and your skills are crazy with the rattle can 🔥🔥

[@jordanbest3926]

Turned out great as usual!

[@JamesDguy]

Thank you 🙏🏻

[@kevindevlin5091]

Looks really great man, amazing job.I was also a dick in a previous comment in another one of your videos so i want to sincerely apolgize for that. Car looks awesome. Keep up the great work brother!!

[@derekshane8786]

Using rustolium 2x satin spray can. Should i or do i need to wet sand before i put on any 2k clear coat at all?? I cant spray the clear within the tacky time of the rustolium.

[@davidruiz6189]

God bless u brother! Looks awesome

[@AB-C1]

Nice job! The price is ridiculous expensive now though 6 cans £220! (That's about 280-290usd!! ) Shame was going to re-clear my BMW. Nevermind. 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

[@JamesDguy]

Here in the USA it’s like $120 usd

[@mitchellaustin2137]

Amazing color on that one. Love it! Keep up the excellent work, you inspired me to repaint my beater '03 Volvo C70. Thank you!

[@Kaiser187]

Looks absolutely amazing now! Talk about a transformation. Great job my friend.

[@user-pwfus]

Looks wicked for a spray can paint job water sanding is the key for that no orange peel shine ;)

[@haac4825]

Like it. Looks very different with that shine wet look. Like it.

[@harrish1978]

Great job . Peace be upon you.

[@anthonylewis6335]

Wishing you tons of luck & Prayers your work is awesome! Keep up the good work & keep them videos comin I look forward to them

[@jordyywolf]

God bless, love the rear bumper ❤

[@selfselfself]

That's a good job you've done there, lovely colour too.

[@mitchellmartinez8066]

Amazing brotha that’s gotta be the best rattle can job I have seen on KZbin 🔥🔥🔥🔥you have talent

[@Ravenguyeneiluj]

Nhot bhed, curious how many cans of 2k you used?

[@JamesDguy]

Mentioned right at the beginning

[@8Bitplus]

God bless you brother! keep up the good work!

[@DC2thomas]

Awesome video

[@JamesDguy]

Appreciate it and DC2 content soon!

[@drpiv]

Amazing job, always enjoy the videos

[@RMH857]

Awesome work Guys. Dang, if my rear quarters weren't bad on my 05 Mazda 6, I'd probably go the same route. Great job!

[@tesladura3085]

Super impressed with what you were able to accomplish with shaker cans. You want to come out to California and paint my 2005 Dodge Caravan? I'll do all the wet sanding. Cheers and God bless.

[@broncoramfan]

Just asking to ask how much cheaper if it is cheaper is using 8 cans vs buying traditional clear you sprsy out of a hvlp gun. Thank you for your time n great video once again

[@jordanbest3926]

Depends on the clear coat you want to compare it to. The 8 cans are pushing $160+. Gallon of sprayable clear from speedokote is going to range from $89-$159. The cans just simplify the process but I wouldn’t necessarily consider it a cheaper option UNLESS you’re buying all the equipment too.

[@JamesDguy]

@@jordanbest3926correct

[@JamesDguy]

Well using cans is quiet that’s why I went that route because a compressor is loud and the neighbors will report me but it’s almost the same price depending on the clear. The price of a gun, compressor, air line, water separator and clear is more expensive though.

[@broncoramfan]

@Moore Motorsports Garage I've seen you use a gun before so I know you know how to use it but I completely understand about the neighbor thing. I was just looking to compare the 2. Thank you for your response

[@ULSB1969]

It looks much better with the clear.

[@luisandmariabonini3285]

That color is absolutely fabulous love it

[@KneelMore_CacheTales]

I'm doing my Yamaha V-star right now but I'm using Krylon All-in-One paint with the 2K clear. The Krylon paint is less expensive but in my opinion a much better quality paint. That car looks sweet!

[@henrythompson5624]

So do you wet sand the gloss down from the color 1st before the 2k gloss for a better look You're motivated me but I want to take my spray painting skills to another level like yours

[@JamesDguy]

Yes 100%

[@henrythompson5624]

@JamesDguy thanks alot I'll try that

[@StephenBrewer89]

God bless buddy! What fog lights are those? Amazon? I need some yellow glass ones for my FA5. Looks good

[@LuisUgarteUSA]

Well the clear coat 2k is the best but you do not need to warm it, it has two components that work very well and dry fast because it has a hardener!

[@kckk7027]

Excellent job on all of the videos that I've watched so far, I like your work..... Killeen, Texas, sweet, I was stationed there at Fort Hood back in the 70s....

[@vanlife4256]

Brother! Awesome job! Thank you for sharing! God bless from Alberta Canada!

[@blainebailey5641]

Do you have to run some of these paints top to bottom? Good work man these all look really good Keep making good content bro

[@nonyhalls1629]

Man I would love to see that color in the engine bay done on the whole car 🤟

[@JamesDguy]

Maybe one day ill do it!

[@nonyhalls1629]

@@JamesDguy hey I got a car you guys could do it on 🙂🤟

[@Prince_of_Catz]

That's awesome bro, to protect the clear coat though. buff with Menzerna 3-1, then use Ceramic coating to seal it. I use Gyeon Mohs.

[@codydonovan7356]

would be nice if this guy responded to comments

[@MatthewRichey]

Looks great and God is so good.

[@ChrisPBacon198]

Whats The Lifespan of This Paint ? And Durability Like

[@briansahli5428]

Looks great man!

[@xXBlownReaperXx]

What if you wait a week after the base coat to dry before wet sand and 2k clear???

[@ThriftMachine]

The garage door insulation how well does it work? GoPro Firmware upgrade should fix the issue.

[@JamesDguy]

We did that and didn’t fix it. Also it works decent since the sun beats on it most the day