HOW I MAKE SPRAY CAN LOOK GOOD!

[@JamesDguy]

Please go in your settings to see it in HD for the best quality experience. There will be more coming soon if God wills! Thank you all for the love and support GOD BLESS YOU ALL! JESUS LOVES YOU!!

[@m-m-garage8767]

How can i paint fiberglass hardtop?

[@JamesDguy]

@@m-m-garage8767 i’m not good with fiberglass so I’m not really sure

[@DaSesh]

Quick question I recently painted my car peach in rustoleum I did use a hvlp spray gun however I was watching a video of yours and I recall you mentioning that you can spray clear coat over the rustoleum paint job without sanding? Or did you recommend scuffing and sanding it prior to laying down the clear? Thanks love all the videos.

[@DaSesh]

​@@slaizen if you have nothing nice to say, say nothing at all. -Jesus you should revisit him.

[@JamesDguy]

If its tacky you could but i recommend waiting till cured then wet sanding and then adding clear. Its alot more work but comes out way nicer in the end.

[@jamessakimae9655]

As someone who was a graffiti writer, go grab a nozzle off an easy off oven cleaner can and throw it on the rusto. It produces a larger pattern and sprays faster

[@GlassWerx]

Good stuff bro. Keep up the good work and spreading the word of Jesus and God's love

[@VF1Skullangel]

Your videos make me wanna look for a C4 vette that needs paint and do rattle cans to it. I did my 96 Camaro with foam rollers and had so much fun but its been so long since I did one. Thank you for the videos and your messages about the good news man! I love your passion.

[@JamesDguy]

I would love to do that sometime because the whole Internet would lose their mind

[@VF1Skullangel]

@@JamesDguy if I move to TX (which im.looking at Brownsville or San Antonio) and buying a project vette I would totally allow you to do that

[@bazilwreckerloughead]

That turned out great, can't wait to see the results of the 2K clear!

[@hhova29]

You hit it well when applying the color on there. It covered well.

[@karljokkerlukkas_974]

Good job, my brother!! Awesome results for a paint can!! From the other side of the pond!! Keep it Irish!!

[@JamesDguy]

Thank you 🙏🏻 God bless you!

[@mre912]

Looking sweet brother. Helpful tip, let your sand paper soak for about 5 to 10 minutes in the bucket before you start wet sanding, and let your tack rag sit out of the package for a few minutes before using. Getting close to doing my Bugeye, so excited. Thanks for all you do for us. Many blessings to you and your family. Blessings from Colorado 🤙

[@JamesDguy]

Thank you and on average they naturally do this! I usually get the stuff ready so its usually soaking prior and out of the package prior. In this particular case it wasn't but thanks for the tips! God bless!

[@petterprime4199]

Another great video, cannot wait for the next one on wet sanding and clear coat. Also, good for you on speaking about your faith, we are all very blessed and often need a reminder.

[@JamesDguy]

Thank you. I have a job to provide for my family but above ALL i have a Loving God to serve i can do both as hard as it may be when facing opposition but its well worth it! God bless you!

[@StreetWorxx]

Awesome results bro love the way the cars turning out

[@shiftwrenchrepeat]

Love it man! Always come to watch I’ve done so many rattle can jobs for customers in my little shop, a lot of your techniques have helped me to get great results. Mechanic by trade but I’ll dabble in some paint work, thanks to you! God bless man

[@bugeye02707]

Rattle can paint jobs do work i painted my replacement fender that a deer had hit with oreily off the shelf paint can and 2k clear and it blends with the car, by the way your fender spray job looks very good 👌🏼

[@JamesDguy]

Yea that color match with some 2K clear works wonders!

[@daxinventor3542]

Superb paint job, and almost unbelievable. You are a magical painter. Well done. This is helping me to paint a small area on my truck. Outstanding !!!!!!!!!!!!!!

[@juliojreyes6234]

Awesome video buddy. Love your content

[@SolomonsProjects]

I've been doing this type of stuff for a few years like you so I already know how to do it all, but I still watch every one of your spray can videos! It's still entertaining content so I've stuck around since you painted that huge car orange 😂

[@masterkingop9271]

I recommend the bulldog spray before the spray can part, it will make the paint stick longer.

[@unstablebobgable]

Looking good, Brother! Question for you; I just picked up a car that has a peeling clear coat on the roof. What grits do you recommend to get it prepped for a respray with spray cans?

[@JamesDguy]

I recommend getting that clear sanded smooth with 800-1000 and make it as nice and smooth without going past the color coat. Then when it’s all smooth hit it with clear again.

[@ginnynewman317]

As usual, you make it look easy.

[@pierrebonenfant9929]

Hi...I want to know if you sanded your base coat just for a better grip or it is because spraymax (urethane) are not compatible with enamel color...tanks a lot

[@adrianfrankowski138]

Amazing quality, looks like from the shop! Good job mate!

[@JamesDguy]

Thanks. It's not finished yet but looking better!

[@5starempire868]

I have a question, if you are redoing your fender in the same color, but a different shade kind of situation, do you wet sand the panel or dry sand it? My fender's clear coat is fading away and I would like to paint them over

[@JamesDguy]

I prefer wet sanding because it seems to make the sand paper last longer and less dust but dry sanding would work too.

[@5starempire868]

@@JamesDguy ok thank you. I really learn a lot from you with painting with spray cans

[@jimharvey9894]

Nice ! So you can 2k clear rust oleum?

[@broncoramfan]

1 I wish you lived near me. I would love if you did my project car 2 sucks about neighbors but I can see both sides to the issue. It is what it is n in the end maybe it's a way to something bigger n better 3 great job one again

[@KevinChinn88]

Awesome! Great video every time. Thanks for showing us that this is possible. Your paint jobs come out AMAZING!

[@JoseVelez-uj1mz]

Great job.... can you do a video on a refurbish plastic bumper? Thanks brother God bless

[@JamesDguy]

I don't know how to do it properly. I usually just replace them honestly

[@jmitch4318]

Have you done a review on the Kustom Canz aerosol paints?

[@JamesDguy]

I might have, i did a pearl Gold i think its from them. Check my videos i can't remember.

[@pstreetgarage7304]

Very nice. I painted my entire project car with rattle can and it turned out great 👍

[@ryanwolfenberger]

Great job!

[@PatrickWalsh-x6x]

Amazing work man

[@timhensley3695]

Love that color so much

[@jeffbeach5720]

keep up the awesome work.. love your vids

[@JamesDguy]

Thank you 🙏🏻 God bless you

[@landdon24]

Just found you and I love your content!

[@lssleepers6464]

How long did u wait In between coats and how far did u hold ur spray can

[@lssleepers6464]

Also is it good to put can in water ,how does it help and how long to leave it in there

[@MalteseMafia]

Came out sweet 🎂 love that you're spreading the message. Read the Bible go direct to the source. 🙏

[@JamesDguy]

Thanks it’s nice that someone actually appreciates what I’m doing most people just run their mouth but that’s OK they’ve got to take it up with God almighty himself I’m just doing the work he sent me to do.

[@ginnynewman317]

I do have a question for you. I want to duplicate your Berry Pink CRV, but on my Nissan Leaf EV. After the color painting, I want to add 2 coats of holographic flake. My idea was to add the flake to a quart of Rustoleum Clear Auto paint and roll that on with a foam roller. Sanding between the two clear holo coats, the finishing with 2K clear. When the whole job is dry and hard, then a resand and buff, same as the CRV. What tips, tricks, concerns, advice could you give me for this job? This isn't my first rattle can paint job, but my first time using flake in my top coats. Thanks, Ginny in Denver

[@JamesDguy]

well as for roller idk about that stuff but in theory it should work with alot of wet sand, clear,dry repeat until nice and smooth. As for the tips and tricks everything i have to offer is in my videos honestly lol.

[@chrstphrr]

Your idea screams out "test panel". As in: something smaller, not on the car. That way, you can test paint the pink base, and experiment to see if the clear+flake idea works with a roller, or not. Edit: there are also "refillable aerosol cans" that can be had. You'll need a compressor, or a bike pump, and cleaning solvents, but you could see if you could spray the clear + flake layer that way.

[@ginnynewman317]

@@chrstphrr refillable aerosol cans??? How did I not know about this? Thank you!!!

[@chrstphrr]

@@ginnynewman317 the one I see most is the YouCan by Jacquard Products. I used a wee glass vial contraption at a friend's decades ago to spray small touch ups. It'd be something James would probably like to try as an in between aerosol and compressor powered sprayer, so he's not annoying his apparently HOA like Karen neighbours

[@lssleepers6464]

How long did u wait in between coats

[@rovinbalagtas6066]

how many cans do you use for a panel this size?

[@JamesDguy]

Half a can.

[@rovinbalagtas6066]

@@JamesDguy thanks! Thinking of doing my entire 8th gen civic sedan this summer (minus the hood) and I’ve been watching your videos for a while. Not sure if I should save up for an electric sprayer because I need to estimate how many rattle cans it’ll take.

[@hadnotandsons9308]

Awesome video keep up great work

[@JamesDguy]

Thank you so much. God bless you

[@roderickdewberry9753]

Another great job!!

[@JamesDguy]

Thank you.

[@halfbaked870]

1st light coat is pretty much a medium to wet coat. good way to get runs if your not moving fast with the can

[@cherokeemary9654]

Ahhh sooo satisfying 👍

[@JamesDguy]

Glad I could make it satisfying

[@cherokeemary9654]

🤗

[@billythekid8814]

what is an estimated price for all these materials

[@posluv1]

Where can you get the spray can? In the auto or the paint area?

[@lccshighlights518]

What gritt do you use when u sand it down? And is primer necessary

[@omar_padilla]

With all due respect maybe you should have a dedicated channel for you to spread the word, when i started watching you years ago religion was never a part of your videos. I like your videos because of the passion you have for painting and showing everyone that we could get pretty awesome results with a spray can. Now i believe in God and i know God loves all and i feel like he put us hear to live our lives as we wish in the end he will be the only one to judge each one of us. I know you mean well but my brother we are not here to judge or to force something on our brothers and sisters, so keep sharing your God given talent with the world but most importantly love the world . We love you brother and thank you for inspiring many including myself to try something we would never have before had you not shared with us.

[@d1specdrifter]

Lmfao😂😂😂😂😅😂😅😅😂😅

[@Kirawolf1971]

Very well said 👍

[@JamesDguy]

No thank you i have always had this channel christ centered just people didn't know it and that was my problem. People always liked something about me or hated something about me and it was always Him they liked or hated. I’m not FORCING it on anyone can close out of the video!i am using my gifts/talents to reach the people the church couldn’t be WE are the church. If you don’t like it that’s between you and God almighty Himself. I am doing what i should have done from the beginning and proclaiming the truth . God bless you.

[@d1specdrifter]

@@JamesDguy man created god as a he. The god idea is an IT. Know the truth,not believe in man created lore.

[@lupechavez3057]

Do I have to use clear coat?? I always have trouble with the clear.

[@godssilentassassin4325]

Hey I’m looking to paint my 02 mustang either Ink(sonic) blue or black. How many can do you think I’ll need? You really inspired me to try this and so far my results with other projects have gone well. Then you’re always spreading the word of God which is the Biggest reason why I follow you too.

[@posluv1]

How long should I wait to wet sand it after the paint job?

[@Basketball_12328]

@@posluv1 I would recommend to wait two days

[@eric13upinriop]

Urgent: I'm about to paint my bumper if this was after market did it come primed like that I just wanna follow the same steps

[@ByThisShallAllMenKnow]

The Bible link in the description seems broken.

[@d1specdrifter]

The bible is broken. Its a great fantasy book.

[@JamesDguy]

I’ll get it fix now

[@JamesDguy]

@@d1specdrifterpeople are broken the Word of God is not. People tamper with it but Gods word will always be incorruptible. People hurt people God does not. People are super selfish and greedy God is not. I assume you have church hurt meaning someone at a church hurt you that was people NOT God. People don’t represent God. GOD and GOD alone represents HIMSELF. We are all damage, broken and needing help and HE is the only one who can help and the opinion of you that matters. Don’t let people keep you from a God who loved you so much He sent His son to die for you even when you reject HIM.

[@d1specdrifter]

@@JamesDguy there is not one actual word of any deity or god in the bible. That is a fact. Just words written by men. And the bible is full of stories even older than the book itself. Taken from other cultures,and tweaked to its own accord. I have a bible for a door stop. All its good for.

[@ilanpro]

Would love to see a rustoleum pearl mist

[@balloftitanium3961]

using this spray can, do you need clear coat after?

[@kristenluckey6276]

Does this paint have hardner in it???

[@lisamcintosh6757]

Just did a project car and when I sprayed the 2 K clear, same one you use the shine doesn't look uniform. I'll have areas of a wetness look and others not. Any thoughts? Have you experienced this?

[@ta.entmoney3405]

Keep a consistent over lap when spraying and lay it on just not to heavy where it runs

[@TheRealMrRoyal]

Biggest problem I have had in the past is drips....any recommendations on how to protect against that?

[@gabrieljones6218]

lighter coats let the paint stick do its job

[@m-m-garage8767]

Good man

[@jumpinjojo]

Crumple up the tack cloth.

[@georgejones1841]

Nice tip's and there are always going to be hate in this world so just ignore that cause it's not worth your time to even respond to the negativity

[@JamesDguy]

I only respond to comments to try and help the ones who actually want it. :) The rest are like vapors.

[@G_336]

God bless you you beauty x

[@JamesDguy]

Thank you God bless you!!

[@G_336]

@@JamesDguy Greetings from down under dear man... i stumbled onto your channel and am excited to try out the metallic blue rapture on my little red ex Japanese fire truck.... LOVE your channel and even more now cause of your GOD LOVING being... thank you for sharing and looking forwards to seeing more of your great work>GOD BLESS YOU AND YOUR FAMILY

[@JamesDguy]

@@G_336That is awesome and thanks for the support it really means a lot for real! God bless you from Texas ❤️

[@10nissan67]

Wait didn’t you forget to prime it?

[@falconeer4382]

the black in the beginning is primer, he says so in the video :)

[@lucidthoughts4519]

Awesome videos, I’ve been trying to get around watching all your content. What’s the sanding process if my vehicles clear coat is peeling off. I really want to try putting a new coat on it. Thanks.

[@TBPony]

Lots and lots of sanding and cleaning, I recommend getting one of those electric hand sanders it'll make your life so much easier. unfortunately the clear coat layer no matter what has to be removed, otherwise the paint will never level out.

[@virgilthompson5136]

Great job

[@thecelloguy4412]

Im gonna repaint my snowmobile with like this

[@Bruceironlion]

How come u don't use primer?

[@tylerbattles7918]

He said its already been primed.

[@ioTypo]

love the bible verse at the end

[@mattmatt2822]

Am I the only one that notices that rustoleum enamel paint never seems to harden? I can gouge with my finger nail almost a month after painting. How is this adequate for automotive use or anything?

[@chasethompson7392]

Clear it after being in the sun for a week

[@mattmatt2822]

@@chasethompson7392 funny story, after that comment I used ppg hardener with some rustoleum and painted my orerunner and it came out hard as a rock.

[@andystewart7086]

Looks amazing god bless

[@whtpwr]

Amen brother.

[@danielcrowder8572]

God bless you bro

[@randalllawkin]

Live the ending and you in Texas too!

[@ednamaycry5534]

I love your Chanel

[@anthonydewayne712]

It’s so good to see a channel that promotes Our Lord Jesus our savior. That’s why I subscribe

[@jimmygreer1286]

👍🏾

[@connersullivan4628]

Got a sub from me where in Texas are you?

[@rickymarin2545]

Amen ❤🙏

[@TheTechnoaddict]

Doesn't it fade without clearcoat?

[@dc4vato715]

It takes a while but yes

[@anthonydewayne712]

On the can it says it’s has uv protection from fade that’s a plus

[@scottdowney4318]

It would more likely lose its high gloss. I have painted many small engine parts and things, and after some years, the gloss is gone. The paint surface is not hard enough, doing a 2k clear give you a hard gloss surface.

[@hofferjh]

🎨👍💫✨️💫❤️‍🔥😎

[@natecarlson6539]

Praise Jesus amen brother!

[@tropadriver7569]

Anex ele fone HC vila Jacuí Jhon kmiuyyrer Jp Don ruo

[@lgmnowkondo938]

Can I get an amen??

[@tonycrusader777]

Great work would love more raptor paint vids God bless you James