Thank you thank you thank you for FULL SUBTITLES!!!!👌🙏👍👍👍👍👍👍
@iwestbury5 жыл бұрын
The subtitles are very well written. Congratulations to Po Ro. It makes it much easier for an English speaker to follow the video. 👍👍
@Nanitro575 жыл бұрын
Thanks for the tests, great job !!
@angelkaymusique5 жыл бұрын
thumbs up for middle finger =D great work as always bro~
@sgy23233 жыл бұрын
제일 궁금했던게 마스킹 테이프인데 확인시켜주셨네요
@dalgom26015 жыл бұрын
수고 하셨습니다😆
@Jenic775 жыл бұрын
땡큐 소 마취...
@stop6195 жыл бұрын
Thanks for the subs!
@santaengineer7764 жыл бұрын
If want to achieve smooth surface, must we polish it even though I don't use chrome? I always cannot get smooth surface all the time. There is always patches even the part is new. I always wear gloves too and it still happens. 🤐
@TsorovanZero5 жыл бұрын
What do you use to clean your airbrush after using urethane paint?
@dsleong83285 жыл бұрын
Either hobby wash thinner or dedicated lacquer thinner, or else it does damage your airbrush as the chemical residue harden
@warhawkbm5 жыл бұрын
Very Good Video as always. I wish I could find those paints in my Country : < I cant even get them to show up in Google Search
@poro72665 жыл бұрын
Here's a link to the store. It's a small individual level business (afaik) so it won't show up on google. And yes it sucks to know that such great products exist but not being able to get it :( I can't get it either
@krokenlochen5 жыл бұрын
@@poro7266 Where's the link or who to contact?
@Rivera_ArtStudios3 жыл бұрын
hi what's the pressure you use for the black, chromo and candy red?? 😄😅
@Adam-vc1xl4 жыл бұрын
Just watching you paint is very enjoyable love the videos
@TheFPSFanatic5 жыл бұрын
Can you give a tutorial on how to achieve such high gloss black with lacquers?
@dsleong83284 жыл бұрын
You simply can't, that's because the step to achieve the same result would be too time consuming as you need to dry the paint and also do alot of sanding and polishing, while urethane/2k coating, once they mix the chemical hardener the shine is always there regardless
@ching199412025 жыл бұрын
Does the chrome paint still be this good (in terms of shines) , if the base paint is normal black+lacquer gloss clear? Anyway, great testing!!
@dsleong83284 жыл бұрын
Lacquer gloss coat lost alot of sheen after it dry, that's why no match with a 2k or urethane coating due to different properties
@garrulousskeptic66163 жыл бұрын
i am wondering on the efficacy of inline moisture trap vs one at the compressor - if anyone can answer me this, thanks.
@AviadMD4 жыл бұрын
Can you please post a link to More Modeling?
@Spawn3DA4 жыл бұрын
Hi Jenic, where can you buy paintings such as the International Plamodel Paint Super Fine Titanium for shipping to the US? I can't find any website in English where you can buy it. I see that they are of high quality.
@user-xb3bw5pm3x4 жыл бұрын
제닉님, 그냥 유광 블랙에 아무 크롬(모로토우 리퀴드 크롬 제외)을 올리면 광이 조금이라도 날까요? 우레탄 까지는 안나겠지만요.
@user-uf5gw7fm9w5 жыл бұрын
Hi my dear.What brand is your paint?
@acem.70685 жыл бұрын
What's the PSI for the urethane and the lacquer?
@Jenic775 жыл бұрын
It is used as 20 PSI.
@acem.70685 жыл бұрын
@@Jenic77 thanks!
@user-pq4un1xc7v4 жыл бұрын
결론은 하지 유광 작업을 잘 해야 하는거군요.....
@azitogi32835 жыл бұрын
sir, did u mix koong and gp08 with thinner? thanks
@Jenic775 жыл бұрын
no. All chrome coatings should be used as undiluted and not diluted.
@azitogi32835 жыл бұрын
@@Jenic77 thank u very much
@user-us6nh4rd6b3 жыл бұрын
모모델링 크롬은 브라이트인가요 미디움인가요?
@johnnypak51953 жыл бұрын
JENIC님 지금 영상은 크롬 뿌리신 후 건조만 충분히 하신 건가요 아님 크롬 보호제를 뿌리신 건가요? 그리고 블랙 우레탄 서페이셔도 하루 건조하신 후 크롬을 뿌리신 건가요? 우레탄은 구경 몇이고 크롬은 구경 몇을 쓰시는지, 둘다 같은 구경 브러쉬를 쓰신 건지도 궁금 합니다. 답변 부탁드려요. P.S- 건조는 자연 건조 이신가요? 아님 건조기를 쓰시나요?
@user-pq4un1xc7v5 жыл бұрын
광내고 계시는게 극세사인가요? 세무융인가요???
@Jenic775 жыл бұрын
일반 극세사 입니다..
@Blueredsword4 жыл бұрын
Where i can buy “ more modelling”? Can u give me the link, plz? Thanks.
@Jenic774 жыл бұрын
hi The online shopping sites I use are all from South Korea. I'm sorry it didn't help.
@user-ir8yh1xr8z4 жыл бұрын
좋은 정보 감사드립니다!! 잘 보고 배우고 갑니다~ 크롬 도색시 분사압은 어느정도로 하셨는지 궁금합니다
@Jenic774 жыл бұрын
저는 보통 1BAR정도로 하고 있습니다.
@Ghostriderr255 жыл бұрын
당신은 어떻게 복근 부품을 칠할 것인가?
@Grumpy_G3 жыл бұрын
Here in the US many of us wanna try Koong's Chrome. You said it's about same as Gianotes. Many here likes Alclad over Gianotes (maybe because of cost) But I think Spaz Stix Mirror Chrome is much better than Gianotes. Please try Spaz Stix if you can get them. Thanks
@byunification5 жыл бұрын
아 그리고 예전에 ps-290 일자패턴얘기듣고 크롬은 겹치지안게 뿌리는게 중요하다해서 숟가락에 일자패턴으로 한번에 쑥 지나가듯 테스트해봤는데 이상하게 광이안나요..제닉님도 그러시나요?(하도는 블랙우레탄사용했습니다)