I'll tell ya, to this day when any of my buddies are having trouble with clutch engagement or slipping after installing a new cable.. I refer them to this video. makes it so easy for inexperienced diy'ers to understand.
@camdenmario45383 жыл бұрын
You prolly dont care at all but does someone know a tool to get back into an instagram account?? I was dumb lost my account password. I would appreciate any assistance you can offer me.
@grahamcaspian62933 жыл бұрын
@Camden Mario instablaster =)
@camdenmario45383 жыл бұрын
@Graham Caspian i really appreciate your reply. I found the site through google and I'm in the hacking process now. I see it takes a while so I will reply here later with my results.
@camdenmario45383 жыл бұрын
@Graham Caspian It did the trick and I now got access to my account again. I'm so happy:D Thank you so much you really help me out !
@grahamcaspian62933 жыл бұрын
@Camden Mario glad I could help :)
@BestBikingRoads Жыл бұрын
Very useful little video, helped my with my first gen R1. Keep up the good work
@tunedvideo8711 жыл бұрын
took my clutch apart yesterday, checked and changed worn parts, mounted everything back on. then the clutch cover.what a bit*ch to mount, almost lost it. then those markings.. way off alignment as the usermanual says and i had no clue how to adjust this. spent at least 2 hours. no way, jose. searched the internet for hours until i found your vid. today, took everything apart, and adjusted it like in your vid and everything works again! let me know when you are in austria, first beer is on me ^^.
@motoracing14g7 жыл бұрын
tunedvideo87 hey man i need some help with the clutch or it could be the cable adjustment if you can get back to me thatd be great
@donovanplummer6796 жыл бұрын
Second beer on me thanx
@MacR62 жыл бұрын
OMG Thank you. This vid helped me out today. Had to replace the cover and had the rod where it was supposed to go but it didn't feel like it was grabbing like it should. Watched this video and within 5 minutes I had it fixed. Thank you!
@miltechmoto4 ай бұрын
+1 for using a magnet on a stick through the oil fill hole. Took about 4 hours before trying that.
@brianhaygood1832 жыл бұрын
Sending a link to this to someone again. Great useful short video. Thanks, man.
@45guyz18 күн бұрын
2006 r1 i got it lined up on the dot like yours but when using a crescent wrench i cant turn it like how u did. I thought the adjustment or turn/freeplay ends thefe
@michaelandrew48495 ай бұрын
On my 07 I could have sworn that dot was to the left but everyone told me it had to be lined up with that arrow I saw another video of a guy he just took the arm off slide the case on and lined it up with the arrow
@brandonrobinson62336 жыл бұрын
Where does the two bolts on the clutch cable need to be so it don't move back and forth
@ABCTutorialz7 жыл бұрын
could this be the cause of gears sticking? like it will stay in one gear and sometimes it won't upshift or downshift
@orrysm5 жыл бұрын
99 yzf r6 franken bikes been parked sadly way too long....bike will start, idle {N}, but soon as i try to kick into gear she dies, being yzf its got alot of wire bypass worth mentioning (clutch,kickstand,signals, lights ect.) i know some faults here can cause an electric shut down as a safety measure, but prior to inspecting all of the harness i took out clutchbasket and put it back in after hearing "defintly jsut stuck clutch plates' - wrong !due to storage)
@jodylatham37772 жыл бұрын
Hello , I’m new at this so bard with me please . I have a 2007 R1 runs great starts right up but I stopped & hosed it off at car wash & rode half mile & it stopped changing gear or going into gear & want some help trying to fix it. I saw this video & wanted to know if it could be my clutch . Need some help fellow riders
@danielwhitmore6857 Жыл бұрын
I can't get any pressure after I put in a new clutch cable and checked my clutch basket I have no tension even with the old cable it's like nothing's there my stuff lines up with yours please help 2001 R6
@immanuelwilson88767 ай бұрын
Any luck same problem
@timmyowena44376 жыл бұрын
got R6 motor goes in gear but won't pull it's in a gokart frame any ideas what it could be? thanks for any help
@danielpena-un8vl4 жыл бұрын
how do you replace that silver spring? the one on my r6 is not strong enough anymore to retract the cable.
@northernking28953 жыл бұрын
The spring is bolt in to that whole cover just got one for my r6
@danielamador94474 жыл бұрын
I just changed clutch on my 06 r1, everything seen good but its extremely hard to pull the cable, and when I put it on gear it jerks and dies right away, so I'm guessing clutch is not engaging any tips? Thanks
@music-is-life42224 жыл бұрын
Hey can you help me? My bike when I put in first gear my bike won’t move at all, so I opened my clutch and saw my plates were broken and I bought new clutch and still won’t move. Any tips or ideas man!!?
@music-is-life42225 жыл бұрын
So my cable is loss and it won’t grab so I don’t know what’s wrong with it like it wound grab hard enough can you please help me or show me something that would help
@Sceneyour Жыл бұрын
Sir .my arm doesn't feel like it's engaging anything. It goes front to back with no resistance. Can u help?
@danielwhitmore6857 Жыл бұрын
I have the same problem, have you fixed yours
@jdogenit10 жыл бұрын
yo dude, my 2nd gen r6 wont disengage the clutch when i pull the lever, i opened up the clutch cover and could not find any visual damage, any ideas ?
@mikejimenez4736 Жыл бұрын
Did you find the problem?
@TheFastPack Жыл бұрын
@@mikejimenez4736 find the issue?
@919niekoАй бұрын
@@TheFastPackI need to know as well😂
@farshida46523 жыл бұрын
I have a 2003 yamaha r6 and after I changed the clutch kit now when I hold the clutch lever and put it to 1st gear the bike's back tire turns and speed goes go 12 km/h. I installed the ebc srk clutch kit. Any idea? Thanks
@Ryan_19973 жыл бұрын
Figure it out?
@lukeschaeffer2551 Жыл бұрын
Don't you need to replace the clutch cover gasket if you do this?
@BestBikingRoads Жыл бұрын
Normally, yes
@havila355 жыл бұрын
Why isn't the clutch going back ? Is it something from the inside is wrong what can I do ??
@FingerFuckinAround5 жыл бұрын
Hector Lopez spring
@chriskeesler48953 жыл бұрын
I’m having some clutch issues need little advice if you don’t mind
@chaoticend274 жыл бұрын
What year is your R6
@meteobambino61665 жыл бұрын
What is that silver spring called , mine is worn out
@ivankotsev62956 жыл бұрын
Hey bro, just a quick question - no matter what I try I can't aline the dot- every time I have it much before or much after the arrow. Any suggestions would be greatly appreciated. Thanks.
@kevinadheen72376 жыл бұрын
Ivan Kotsev same with me have you fix it yet ?
@ivankotsev62956 жыл бұрын
Unfortunately not, but I changed only the friction plates ( some racing version ) and left the old pressure plates so the overall thickness of all plates combined might be wrong, I mean in my case I should replace the pressure plates too maybe that is the problem.
@kevinadheen72376 жыл бұрын
Ivan Kotsev I changed mines but replace it with oem ...well it works fine I'll just leave it
@pena199210 жыл бұрын
What is that metal piece called? The one that takes space instead of drake sliders..?
@jesusfranco372310 жыл бұрын
In the clutch which of the washers go on first the curved one or the flat one?
@frankiecastanos67304 жыл бұрын
Is that on all bike will it work on Kawasaki zr7 ???
@acemob18514 жыл бұрын
I've tried doing this for 3+ hours Lol. I don't know what could be the problem. I installed my new clutch set. and yes, they are in order and in the right way. but my clutch is not engaging at all. when I start bike in neutral and pull clutch in to put it in first gear it cuts right off.
@lamontcranston81813 жыл бұрын
Was the kickstand still down?
@r1_remy1567 жыл бұрын
Does this help with the clutch not disengaging ...my tire spins when I put the bike in gear while pulling in the clutch
@919niekoАй бұрын
Do you remember how you fixed this? Same issue here just replaced the clutch
@wayneashdown52707 жыл бұрын
I've got r1 1998 , been standing for four months got on it pulled in clutch into 1st an it's like u hav no clutch but all the resistance is in the lever could it dry ?
@jacobbatrano7 жыл бұрын
Wayne Ashdown did you figure that out im have the same issue
@Calvinmetal9 жыл бұрын
Great info. Thanks for sharing this awesome tip.
@jaredjroc51395 жыл бұрын
Do I have to drain the oil before I do this or does it not matter?
@amccargar23 жыл бұрын
Yes. Drain oil.
@quis050510 жыл бұрын
Did you have to drain oil to do that procedure?
@amccargar23 жыл бұрын
Yes. Drain oil first.
@TroubleMakerVlogs11 жыл бұрын
Nice vid man! Do U live in NY??
@nikkibrealey50755 жыл бұрын
I have a Yamaha r6 2008 I’ve installed a new clutch, there was no markings or any signs of any size difference in the friction plates or clutch plates...however when I connect the clutch cover and align all the dot and triangle up it’s freely moving but when I tighten the bolts up the clutch arm sticks...do u know why this may be at all..? Thank you for your time
@jOHNnguyen01411 жыл бұрын
Great job ! Keep it up!
@blriders48357 жыл бұрын
this is the issue i have -replaced my r6 clutch put cable is loose -
@josetapia34594 жыл бұрын
BL Riders I have this problem now I just replace all my clutch plates and I put everything back on but my clutch cable is loose
@TheFastPack Жыл бұрын
@@josetapia3459 find the issue?
@King2tone Жыл бұрын
Mine doesnt even click doesnt turn fml
@TheManyflores11 жыл бұрын
Tnks I'm adjust my 08 r6 feels better
@3jawz13 жыл бұрын
well this video work for a 97 fzr600
@juliemattei574311 жыл бұрын
My 2002 wont shift pass 3rd on some occasion I change the shift rod It still happens sometimes if i pull shift rod with my hand i can shift fine but when i mount it were it goes I have that problem Due to the fact that pulling with my hand it shifts fine is not the transmision right so what am i mounting wrong Email suggestions to jjuan129@yahoo.com TY
@quis050510 жыл бұрын
Did you have to drain oil to do that procedure?
@SmittyProductionz6 ай бұрын
That’s what I was wondering, I swear that basket is soaked