Replacing Transmission bearings on a Yamaha R6

  Рет қаралды 11,301

Sportbike Everything

Sportbike Everything

Күн бұрын

Пікірлер: 45
@Nultic
@Nultic Жыл бұрын
This video has been a huge help! Rebuilding my Copart 2006 R6 and I really appreciate the camera quality and showing how everything came apart and went back together. Thanks man!
@tomt07
@tomt07 11 ай бұрын
Super video. Hopefully, it will give some people the courage to take on jobs like this, that they were afraid to tackle. I like your flip-over engine stand. Great idea. It would have saved me a lot of trouble when I replaced a 2003 R6 gearbox, and it will be a big help with future projects.
@andressimon9130
@andressimon9130 3 жыл бұрын
Great video bro. I own an 06 and Im in the process of replacing the gears in my gearbox so I appreciate this video 1000% 🙏🏽👍🏽
@MrItsthething
@MrItsthething 3 жыл бұрын
4:26 A lot of people think you have to pack the oil pump with petroleum jelly or something which just isn't true. Putting some oil in the pickup is totally fine. The clearances in the pump are so small that oil will have no problem sealing it up so it can prime. Love your videos, keep it up.
@texasmotorrad8680
@texasmotorrad8680 3 жыл бұрын
I like that you are not backing down from a very ambitious and technical project like this - most people would lose their wallet or just trash the bike. This is not like a car repair because its two wheels and goes really fast and all you can do is hang on if something goes wrong. good job on the camera work and and keeping it interesting so we can follow along - I know its hard doing two jobs at once and then have to edit it all for us to sit back and just enjoy.... Keep it up bro! I'm digging it.
@TheMeek1000
@TheMeek1000 3 жыл бұрын
🙏 thank you
@jasonbrooks1534
@jasonbrooks1534 2 жыл бұрын
You a Cold dude 🥶🥶🥶🥶🥶🥶🥶💯🦾💯 What I learned about my gear shift lever not staying into gear was the parts of this video of you installing that spring .... 🤔.... Thanks for everything plus on top of pointing me in the right direction to do that repair to my R6 😊🤝😊🦾💯.... You are awesome!!!!
@719-Moto
@719-Moto Жыл бұрын
You're smart as hell for that baster for the oil 😂
@MoreDollaSignsLP7.62s
@MoreDollaSignsLP7.62s 6 ай бұрын
18:55 when you took that breath in is when I know it was serious but good job I think I need this done to mine
@Smitherzjay
@Smitherzjay 11 ай бұрын
Mechanic/biker asmr. Well done.
@travisray139
@travisray139 2 жыл бұрын
Thank you for documenting this so clearly. I've got a 70k mi FZ09 and something tells me that sooner or later I'll be diving into replace bearings or something. A good video like this helps take that mystery out for the first timer.
@BrentTravelz
@BrentTravelz Жыл бұрын
You should’ve added “asmr” to it bro 😂
@chrishollingsworth2257
@chrishollingsworth2257 6 ай бұрын
Quality production! I am curious as to how long the clutch cover actually took you!
@Errant2178
@Errant2178 10 ай бұрын
What were the symptoms of the bike which led you to think it was these bearings that were the problem? I have been trying to figure out where my vibration is coming from on my FZ1 and was thinking it may be bearings in the tranny or a gear itself is gotten bad. Thanks for the great video
@Rangeman001
@Rangeman001 8 ай бұрын
Awesome vid, is it safe to hit the inner race on bearings?
@Scoupe400
@Scoupe400 Жыл бұрын
Great job. Like the bench rig. What kind of mileage was on this one? And video effort appreciated.
@themuffinman8871
@themuffinman8871 Жыл бұрын
Hi just wondering when you put in the shift drum how do you know where you position the shift forks in the shift drum channels? Is there an indicator on the shift drum showing where the neutral position is on the shift drum?
@elboynatural79
@elboynatural79 3 жыл бұрын
Gran trabajo amigo
@christopherpeterson1400
@christopherpeterson1400 10 ай бұрын
I am considering buying a r6 project for winter months. The owner says " it pops out of gear " ... I imagine it's bearings gone or gears broke. What was your parts cost on this bearing replacement ?
@ayp81
@ayp81 2 жыл бұрын
Nice job man 👍🏼
@chadronquillo69
@chadronquillo69 Жыл бұрын
Damn I wish I knew how to do all that right now 😂
@alejandroprior431
@alejandroprior431 2 жыл бұрын
What's up, quick question do you think it can be done without removing the engine removing seems to intimidating for me
@alwayshustling8854
@alwayshustling8854 2 жыл бұрын
What would something like this cost at a shop?
@kevinpohludka1164
@kevinpohludka1164 6 ай бұрын
im sitting here in garage and there is a open engine r6 05 front of me , thanks but im lost to take off the chain of oil pump\update, fixed
@marcsultanian6911
@marcsultanian6911 2 жыл бұрын
Great video, very usefull
@O.World_RR
@O.World_RR 2 жыл бұрын
Hi bro, What is the size of that wood box ? (0:28) Thanks!
@tysonriordan2252
@tysonriordan2252 2 жыл бұрын
What sort of symptoms was the bike experiencing for something like this?
@MOTOCICLISTA29
@MOTOCICLISTA29 3 жыл бұрын
So in short you can change the crankshaft bearing without dissassembling the whole engine?
@TheMeek1000
@TheMeek1000 3 жыл бұрын
Thats what it looks like to me. The head can stay on, but you can’t reuse the piston rod bolts after you remove them.
@MOTOCICLISTA29
@MOTOCICLISTA29 3 жыл бұрын
Where do you downloaded the manual? Thanks
@TheMeek1000
@TheMeek1000 3 жыл бұрын
I was able to find it on r6-forum.com or r6messagenet.com.
@MOTOCICLISTA29
@MOTOCICLISTA29 3 жыл бұрын
Saw the manual of r6 2007 and r6 2008 they are little bit different specially on tightening the crankcase bolt 1-10. Do you tighten it first like 20nm then loosen it then tighten it to 25nm then loosen it then tighten it again to 27nm? The 2008/2016 engine has a different tighten procedure. You’ll need a degree tool. Im a little bit confuse 🥴
@alissonmelo1709
@alissonmelo1709 2 жыл бұрын
How did you clean the case? Or did you resurfaced it?
@MrZoroman13
@MrZoroman13 9 ай бұрын
Does anyone know if there is one or two circlips on the bearing closest to the sprocket on the transmission?
@arturio55
@arturio55 Жыл бұрын
Part numbers for bearings?
@thematrix3431
@thematrix3431 3 жыл бұрын
This was super satisfying to watch. What year r6 is that? 07? 08?
@TheMeek1000
@TheMeek1000 3 жыл бұрын
Thank you, it’s an 07
@thematrix3431
@thematrix3431 3 жыл бұрын
@@TheMeek1000 It's in great shape for an 07! I needed a valve adjustment on my 07 and have gotten maaaaajorly into the R6 weeds as a result because I literally knew practically nothing about my bike or how it worked. Made a lot of mistakes doing the adjustment and now I need to drop the engine out, which is how I ended up finding your channel
@TheMeek1000
@TheMeek1000 3 жыл бұрын
@@thematrix3431 Thanks, I hope something from the channel helps. I was starting off just like you, but I learned alot, which is why I started the channel. But big respects and best of luck
@thematrix3431
@thematrix3431 3 жыл бұрын
@@TheMeek1000 Thanks bro! After much patience and many learning mistakes, she purs like a kitten. What happened, though was as I was torqueing the cam cap bolts back down to spec, FIVE of them threaded. Five. Im going to helicoil them but don't have space for a drill to fit under the Triple tree so it'd probably easier to just drop the engine out and get the threads right then take the head off, buy a new Gasket and risk stripping the bolts that hold the head on.
@thematrix3431
@thematrix3431 3 жыл бұрын
I have two torque wrenches one manual and one digital so I sincerely doubt they are both so out of spec they ripped the threads out of the head. I think she is just an 07 bike that's been stored outdoors and the aluminum is now soft
@twowheelsr6
@twowheelsr6 Жыл бұрын
You know what you should’ve gotten? Ceramic bearings 😈
Yamaha YZF R6 Engine Teardown | Partzilla.com
19:59
Partzilla
Рет қаралды 146 М.
Gen 1 Yamaha R6 Full build Rebuild 1999 2000 2001 2002
31:45
Engine Informant
Рет қаралды 10 М.
Муж внезапно вернулся домой @Oscar_elteacher
00:43
История одного вокалиста
Рет қаралды 6 МЛН
За кого болели?😂
00:18
МЯТНАЯ ФАНТА
Рет қаралды 3,2 МЛН
Long Nails 💅🏻 #shorts
00:50
Mr DegrEE
Рет қаралды 16 МЛН
The Secret Behind Quickshifter: How It Makes Your Ride Faster
12:39
FTS-Simulation
Рет қаралды 151 М.
Adapt ANY Engine to ANY Transmission!
26:14
MacroMachines
Рет қаралды 1,7 МЛН
Yamaha R6 2000. Dismantling engine. Part 10 of 14: Remove the gearbox.
8:23
El garaje de José Manuel H
Рет қаралды 11 М.
Fix!!! Yamaha r6 not going past 3 gear/shift into 3 gear
18:11
Ross Esteban
Рет қаралды 15 М.
How A Motorcycle Transmission Works
7:39
How-To Motorcycle Repair
Рет қаралды 251 М.
I Only Paid $600 For My NEW R6!!! (Quick Rebuild and Patreon GIVEAWAY!!)
32:22
The Ingenious Mechanics of Driveshafts
21:28
New Mind
Рет қаралды 388 М.
Transmission Repair 1998 Yamaha YZF600R a.k.a. Thundercat
56:30
Matt’s MotoWoRX
Рет қаралды 12 М.
2008 Yamaha R6: Head Install | Partzilla.com
5:37
Partzilla
Рет қаралды 15 М.
Муж внезапно вернулся домой @Oscar_elteacher
00:43
История одного вокалиста
Рет қаралды 6 МЛН