Wow! Nice to see a professional make an "ohhhh boy" reel matinance look so easy. Thanks for the video great job Dennis! I'm still scared!
@2ndChanceTackle2 жыл бұрын
Nothing to fear but fear itself! Well that and a 2 speed lever drag. I hate that shift spring, it gets me every time! Thanks for the note - Dennis
@kevinh50242 жыл бұрын
You really provide a great service to the fishing community in educating fisherman. Im always amazed with the variety of videos. Thank You!
@2ndChanceTackle2 жыл бұрын
I appreciate that! Thanks for the note and for watching. I like the variety of the reels that come in my shop. It keeps me going and makes for an interesting diverse set of videos - Best wishes - Dennis
@jeevanaidoo11542 жыл бұрын
Enjoyed the video really awesome stuff
@2ndChanceTackle2 жыл бұрын
Glad you enjoyed it. Thanks for watching - Dennis
@bluelife21272 жыл бұрын
Nice video! Would you please do the 2 speeds TYRNOS 50II LRS? Thank you!
@2ndChanceTackle2 жыл бұрын
I do not have that reel in my shop. I have added the request to my list and will do a video when one comes in for service. Thanks for asking - Dennis
@bluelife21272 жыл бұрын
@@2ndChanceTackle Thank you! I'm looking forward to it 😊
@skullhart10 ай бұрын
What would cause this reel to be difficult to turn with the handle, even though the lever drag knob isn't too tight? My free spool is fine. I just performed the disassembly, cleaning, lube, and reassembly just as you demonstrated.
@2ndChanceTackle10 ай бұрын
It sounds like something is trapped in the reassembly. Take the gear side plate off and spin the handle. It it is tight, you can locate the issue. The problem should not be in the spool side - Dennis
@skullhart10 ай бұрын
@2ndChanceTackle Thanks Dennis. I tried that and the resistance increases with increased drag. I ordered new bearings 104JL & 104VH. Perhaps there is an issue there.
@thevernonposse Жыл бұрын
Should I flip the drag washer on the service are both sides usable
@2ndChanceTackle Жыл бұрын
You can flip it on most of these reels as the one side is help stationary and the other side is the one that wears with the pressure plate. - Dennis
@davebl96452 жыл бұрын
Hi Dennis, l wrote the other day about if the TLD reel was similar to the Tyrnos 20 l have an issue with. This video is much more like the 20 and is a great help. It seems the last person to have serviced this reel ( a well known shop here in Florida) had completely coated all the inner gears/case with the wrong type of grease and in the heat it had melted and has destroyed the drag washer. I am just going to replace the washer and wondered if you might recommend a source or do you sell them? I am going to remove all the grease, clean and lightly coat the gears and shaft in Penn grease and oil the bearings. Many thanks for the great videos.
@2ndChanceTackle2 жыл бұрын
I don't sell parts. You should be able to get the washers through smoothdrag.com or southwestern parts.com - Thanks for asking and glad to hear that the video was helpful. Best wishes - Dennis
@davebl9645 Жыл бұрын
@@2ndChanceTackle Hey Dennis, further examination of this reel of mine has revealed the Spool shaft bearing on the Drag lever side needs to be replaced...how should this bearing be removed? The housing is plastic so l want to be careful..any tips/tricks? Special tools?
@davebl9645 Жыл бұрын
Just figured out how to do it Dennis..l took a spring binder clip apart and it worked perfectly to help extract the bearing ..l can't seem to be able to attach a photo to show you but it is just a spring clip used to hold piles of paper together
@iCrocodile Жыл бұрын
good day. my new tyrnos 30 ( 1 speed) have a little spool luft ( maybe 0.5- 1 mm). Its too bad ?
@2ndChanceTackle Жыл бұрын
It should be OK. You may be able to adjust that by adding a tension washer to the axle shaft
@iCrocodile Жыл бұрын
@@2ndChanceTackle thanks for answer. Maybe I'm too worry about it, because it's my first expensive reel for trophy catfishing))
@victorocanaburdeus69354 ай бұрын
Puede ser que el Okuma Solterra sea SUPERIOR?? Gracias
@JamesLee-tt9oe6 ай бұрын
Mr. Dennis what will be your labor cost on servicing this model fishing reel I just got finished cleaning one for a customer of mine and I have no labor cost for this reel that I can find thank you 🙏
@2ndChanceTackle6 ай бұрын
$20 would be a fair charge for a complete service of the reel
@DAVIDFROSTH6 ай бұрын
Hola Dennis ,saludos desde España,veo mucho tus vídeos y gracias a ti consigo desmontar y montar todos mis carretes y funcionan👏👏,Tengo un problema con uno, espero que si no es molestia meyedas ayudar, se trata de un Shimano Triton BeastMaster 20/30 la arandela de silicona se a descompuesto,sabrias decirme que material puedo poner para sustituirlo? Muchas gracias y un gran saludo desde España
@2ndChanceTackle6 ай бұрын
Gracias por mirar y por preguntar. No estoy seguro de a qué lavadora te refieres, pero si es en la que estoy pensando, he escuchado a gente usar un montón de arandelas de teflón como reemplazo. Dennis
@DAVIDFROSTH6 ай бұрын
@@2ndChanceTackle Muchas gracias Dennis por contestarme. Es una arandela de Caucho con silicona o algo así ,parece ser que estos carretes tenían este defecto de fábrica el material se descompone,es una lastima porque es el mejor carrete que tengo... Si encuentro alguna solución te lo comento,por si en algún momento te sirve. Un saludo y muchas gracias
@christopherjenkins23732 жыл бұрын
What did this reel cost brand new? I have actually seen a few two speed spinning reels though I’ve never used one. I have no need of such a reel. Of course my Shimano reels are mostly vintage ones. I do have a Sonora Shimano but it did not have a lot of different size screws that Shimano is infamous for. It appears this Shimano does seem to fit that description though. This reel would greatly intimidate me. It certainly has some impressive gears. This is the first time I’ve ever seen the insides of a two speed reel. You did a superb job on this one Dennis! This was fascinating.
@2ndChanceTackle2 жыл бұрын
The reel sells for around $350-$400 for the 2 speed model - Used they still command a price of around $250-$300 based on condition - Dennis
@seymourwrasse33212 жыл бұрын
some of these reels have to be a little nerve tacking when you get the first one in your shop to work on
@2ndChanceTackle2 жыл бұрын
Yes - particularly if you cannot find a schematic! Those pesky little springs can make you more than a little nervous - Dennis