Seller Said He Couldn't Fix This $1000 Dirt Bike

[@Fortnitegamer-97]

This mate is a prime example of why you don’t trust a word anyone says keep up the good work and I love how you laugh at all the faults and just get on with it 😂

[@je7647]

I dont think he trusts anything a seller would tell him, he buys bikes for a living. maybe their word could mean something, but the more they seem to think they know the more they are likely lying to you.

[@zrkn1]

I'm starting to notice that the worst bikes are the ones that the seller says "I just rebuilt it and now it won't start" I feel your pain man. Your repairs are starting to build up and I'm still cheering you on, have faith and keep pushing forward young man.

[@module79l28]

After so many of these, he's either the naïvest person in the world or we're missing something.

[@flyingkaratechop]

I agree, it's in my top 3 red flags. The other two are colored spoke covers and spray paint

[@soulseek2]

@@module79l28 maybe it just makes better content... an hour long whole bike teardown and error searching is more interesting (and probably better paying) than a 5 minute video of "fixed a loose wire and now it starts and rides perfectly"

[@module79l28]

@@soulseek2 - If it's just for content then it's even worse because he knows he's bought a dud and his surprised acting and his complaining about some bikes turning into money pits are faked. That or, as I said, he's the naïvest person in the world and believes everything those sellers tell him, even though he has shown multiple times that he has the ability to distinguish between what he should buy and what he should avoid like the plague.

[@Nine_883]

Do it yourselvers keep mechanics employed.

[@RAKINAUS]

I just bought a 1990 DT 175, the guy told me it ran, but then it wouldn't start. I stripped it down, there is no way it ran. Good video, you are a true professional!

[@SpaceRanger187]

Its best to assume it needs a full rebuild if it doesn't run. People love to lie. The worst part is thinking their 500 dollar bike is worth 10k

[@AverageCitizen333]

Well, they all run until they dont.

[@MutlulukVerenBilgi]

"The only free cheese is in the mousetrap."

[@Gangstercub]

Hahaha... love that analigy

[@rh2501]

Stealing this!

[@Pitbike_Patt]

Idk whats free about $1000 cheese

[@andrewforbes146]

@@rh2501 so am i its funny

[@Slutparm]

Wouldn’t sell to or buy anything from young Joseph. He needs 10 years of experience and common sense

[@billglass4597]

I like how you keep cool even in adversity. Your downloads are truly informative and enjoyable.

[@DG-mi2mc]

Downloads?

[@walk4718]

Yeah, that little chuckle when he discovers something bad. 🙂

[@DG-mi2mc]

@@walk4718 oh ok, never heard of that expression! Never too old to learn

[@richardsmith8590]

It's called editing....

[@rcclassiccrawlers4368]

You only see and hear what he wants you to see and hear. Might be completely different on the other side. 🤷🏼‍♂️

[@hardluckvintagegarage6968]

Joe is teaching all of us.....always check for spark before buying. If you are ever troubleshooting a spark issue, I have found the stator goes bad about 95 percent of the time versus the CDI or Coil.

[@ryanjarrell4359]

Theres so many little things joe can do when he goes to buy a bike. But I know he just gets them for the content. Would be so easy to check for spark and compression test before buying. I used to have a subaru wrx wagon, and when i sold it, the buyer did a complete compression test before purchasing. He's a builds them, so it was quick, but regardless, know what you are purchasing before you purchase.

[@Joeyhill-wj6js]

He’s not teaching anyone.. he’s not even a qualified mechanic

[@txdbstx8967]

@@Joeyhill-wj6jswhat makes someone a qualified mechanic? Are you qualified to operate a motor vehicle? Was Einstein qualified to demonstrate equations and quantum physics? No?

[@zensminger]

Wow. From no spark, to stater, to missing teeth on the sprocket, to tearing apart the entire engine. Damn!

[@92xl]

@@USMichigunPrepper I'm going with bad crank seals leaned it out and burned it up. Cylinder and the original piston didnt show lack of cooling (at least not to the degree to cook a crank.)

[@stkyfngrszmooth]

​@@92xlI didn't see that type of damage either. Everything looked good.

[@porchonetwothreefour]

It’s all for content. He doesn’t care.

[@stkyfngrszmooth]

@porchonetwothreefour I know I would. If you have to dip into your KZbin money to keep this hustle going, then you're a failure as a businessman.

[@steveww07]

@@stkyfngrszmooth like you know

[@meandmybuddy964]

Man I bought so many two strokes in the the late eighties and nineties from people that just didn’t mix the fuel right I had a little motorcycle and small engine shop miss the days 😢

[@jimcarlisle2309]

He said everyone wanted it, but he saved it for you! You must get more, selective, you’re the man with the money and the knowledge to fix it ! the

[@luuk-out-below9804]

Holy Fukashima.... when you melt down a 2 stroke and just rebuild the top end and hope it all works out! I like the show though, good trouble-shooting and teardown and diagnosis.

[@mikewhitley1183]

I'm surprised that people are so desperate that they will lie about the condition of a bike just for a little bit of money, the world we live in

[@stkyfngrszmooth]

It's this economy. Our current "administration" (It's a regime if you ask me) has run this country right into the ground.

[@Hold-my-beer]

I like to mess with them but only when they’re liars. I’ll send them a message after a day or so and thank them because it was an easy fix like a fuse or something dumb like that lol. It really throws them off and they have to rethink if they screwed up and was wrong about the bike. I’ve had a couple of them actually want me to take the bikes back and I just laugh at them. lol

[@stkyfngrszmooth]

It's this economy. The Biden Regime tanked it on purpose. It's all a part of their master plan to absolutely break the middle class.

[@ryangrover4699]

To me whats worse is its someone who watches the channel or so he says he does

[@kennethgray2504]

You need to be surprised at how desperate people are to buy this junk. That's the problem.

[@oscr_zen]

Much appreciated that You record all of this. I cant imagine how cumbersome it is to work on mechanical stuff, getting your hands dirty and still moving the camera around and getting the framing. I know You've got that down pretty well. Just navigating a camera with dirty gloves, hands is the worst :D

[@6lastresort]

I’ve learned more on your channel in 2 weeks than I have with others for the past 5 years.

[@jesuswarrior6468]

And I hope your bikes are running boggy

[@6lastresort]

@@jesuswarrior6468 nah I’d need him to do a live stream step by step before I attempted to work on my own.

[@aawrench]

Joe Please clean those case halves before you reassemble. You do really good work but it kills me when you don’t clean first…

[@mrutherford8590]

The seal sucked in air and dirt and overheated and sandblasted the bearings

[@MrMachacker]

i love these late 90s early 2000s two stroke vids of yours

[@justinchapman5774]

Ive bought a 1994 yz 125, that was fully rebuilt top and bottom end just beat up plastics for 1000$, also gotta a freshly rebuilt 1998 rm 250 for the same amount, i put a new plastic kit on it now have 2 great bikes for like 2500 all in, there are definitely good deals out there if you look hard enough

[@thekawasakidude715]

I know it sucks for you but i picked up a steel frame Yamaha 125 not too long ago so all the videos youve done with all these 125s really help me out with my own project. Not to mention the entertainment factor to pass the slow times during the work day. We appreciate you😅😂

[@1005musichugger]

Please get a proper mechanics hammer, a ball pin type. U get better results when using the impact driver. But love the engine rebuilds 👍

[@jumpinjojo]

I’ve been saying that for months!! That damn claw hammer is killing me.

[@DealinDmg]

I was hoping it was gonna be a good deal. But, then you removed the flywheel cover. It was full of sandy debris. That's never a good sign. The no spark issue.....well all of us that follow 2Vintage know that he's tackled that issue countless times. When the motor locked up. I knew Joe was in for a full rebuild. As unlucky as that may be. I end up watching the follow up video. Which educates me on the yz125 rebuild process. Love your content. Lifetime follower.

[@shanewilliams7834]

I sincerely hope these shady people get what's coming to them. That should have been a 350 dollar bike . Unfortunately, you can't trust anyone anymore. You are a better man than me, Bro. I'd be over at his house with a bat . I hate deceiving people, and you definitely ran into one. Good on ya for always staying positive in your videos.

[@RC-fu6hg]

Wow what an awesome tear down!! I loved the video especially when you showed each damaged part.

[@minnesotatomcat]

You can’t hardly claim that you “rebuilt” something if you couldn’t get it to run. You just put some new parts on it and now someone else has to tear it apart and do it correctly.

[@steveaustin1984]

😂

[@AAllen777]

Great tenacity young man, you never give up and must come to an absolute resolution. Your videos are awesome, you're like a surgeon in the small engine world, how did you learn so much at such a young age? Congrats. If you were close to WV or ever driving through I'd give you my old 81 Yamaha Maxim 550 just to see it live again.

[@michaelesposito6678]

Where's the Almighty spark plug tester.😂😂😂

[@dennissarver1963]

🤣🤣🤣

[@jonathonbeharriell1489]

I wanna get another 125 , I have my xcr 450 but I miss that 2 stroke scream.

[@jLkm897]

Get 250

[@jonathonbeharriell1489]

@@jLkm897 I did exactly that ! 14 sx 250 best decision I made. Nice to have the choice

[@Natedoc808]

I just got a free 2004 YZ250 because my BIL said it needed way to much to make it run. So I spent 30min getting it apart, getting the carb off, cleaned out and found the excess RTV had clogged the jets. Cleaned that out, reset the carb to factory specs. Put a new plug in it, tested positive for spark. It has a leaking/cracked gas tank so I snagged the one off a free 06 yz250, fresh gas and the free 04 is dead no more! 3rd kick and she is good to go. Bled the brakes and they’re good. No leaks. Needs a shift lever.

[@anthonyscott16]

As you mentioned, it definitely could have been worse. The main thing is that you are talented enough to fix it. Great video bro!

[@truvintage5800]

I'm Glad after all these years Joe is taking apart motors and fixing them properly.

[@RC-fu6hg]

This has me missing my late 70’s Suzuki DS 100 not much power but it was a whole lot of fun.

[@scottmiller3025]

Shoot I had a 82 DS 80 and that thing was a rocket…lol

[@keithcrampton1438]

WE LOVE YOUR SHOWS BECAUSE THIS IS THE ONLY SHOWS THAT WE CAN UNDERSTAND TOGETHER AS A TEAM!

[@jessiej3991]

WOW you got ripped off! That bike is worth maybe $500 at MOST! The moment you said the carb was not attached said one thing which is that the seller slapped it together knowing something was REALLY messed up just to get $1,000 out of you

[@kennethgray2504]

Don't be so hard on the lad. The premise of this channel is. I pay way to much for this junk. Then spend way to much money to fix it. So I can sell it for a loss. And waste my time.

[@jessiej3991]

@@kennethgray2504 ROFL 🤣🤣🤣

[@williamevans6468]

​@@kennethgray2504 I don't believe he sets out to lose money, he just never learns that people lie when they tell him they had it running and now they don't know why. End of the day, he needs to learn instead of staying in the same ole rut he has been in. He also needs to learn how to do alot of other things that I won't go into cause it's a long list. But, he is good entertainment for those of us that know what we are doing!!!

[@Hagg506]

Even if he slightly over-pays for the bike....he's making money on the video and the resale of the bike.

[@kennethgray2504]

​@@Hagg506How would you know? You have no idea what this channel makes.

[@zeth15943]

Only positive thing on taking a loss in a money Pitt bike is KZbin revenue should still do alright

[@stkyfngrszmooth]

That's just it. It's not a good buy if you have to go into your own pocket to rescue it.

[@zeth15943]

@stkyfngrszmooth I totally understand that but if I bought that bike I'd been a 100 percent screwed atleast he has a buffer of KZbin money to cover it but he usually does really good so a few losses here and there isn't a big deal

[@SpaceRanger187]

@@zeth15943 You should know better then to give 1000 dollars for a 98 125 that doesn't run. Its worth 500 tops. Doesn't matter what parts are on it

[@cenccenc946]

Bad bikes make for the best views. Who wants to watch an episode where he goes, "yep, just needed to clean ground and it started right up"? We want to see some bleeding knuckles and lots of swearing. 😆 🤣 😂

[@Okman321]

I notice that when you use the impact driver, you tend to twist it as your hitting it, and also you give it a bunch of little light taps with the hammer. All you need to do is hold that puppy with a firm grip (you do not want the handle twisting at all) and give it 1 SOLID bang with the hammer.

[@mattgraham1983]

Oh man thats a bummer, oh and JS no one rebuilds the top end without checking the condition of the crank/bottom end. I think he knew it was smoked but lets give him the benefit of the doubt👍

[@hoosierway]

My assumption would be that you would replace both sprockets and the chain, my point is, at about 4 minutes I seen the master link backwards too. Good video.

[@michaelgarland579]

So what mastermind is backwards mine is to on my yz125 2003

[@larrywarner9314]

Joe you could be right about that loose coil wire , I just bought a 2001 YZ 250 that was completely rebuilt top to bottom and wouldn't run !! I took the carb off and cleaned it and now I have a $4000 dirt bike so my point is don't overlook the small stuff

[@jasoncashmore6675]

Owner said bottom end was fine🤦‍♂️ he knew it was toast😔 love your work Joe ty💯👍

[@1ralton1]

"Maybe he just didn't catch the crank" That's very diplomatic of you I must say. Still it made for a good video.Thanks

[@wesleypulkka7447]

2V, ouch! And yet you remain undaunted! Mega Kudos!

[@floydbeattie2654]

save some money do your own rod replacements on these small 2 cycle motors , you got a press all you need is a pair of 2''' by 2''' or 3''' by 3''' square stock bars and a flat stock slab thin enough to fit between the slabs with a u cut out for the rod and you push the slabs apart . Scribe the crank slabs 90 deg from the rod pin before you start to give you a good guide as you reassemble. A set of v blocks and a dial indicator to true, a brass hammer to hit the slabs to true on your done. I have done hundreds working for a dealer for two decades.

[@fpsmichael1898]

Thank you for making these videos my dude! I have learned so much watching! Nice looking bike tho.

[@Joe_HamRadioGuy]

Hope the new stator is all you need. To bad it had more problems than you thought but we have confidence you will fix it. Keep up the great work and videos. ✌🏼

[@st7650]

Before watching Ching the video seems like every time you get a bike that someone has messed with that didn’t know what they were doing seems like they only make it worse then better. Thanks for the post keep my eye open for every video that comes out. Hope you had a great Father’s Day

[@debcamp2359]

The air came out of that one fast. ❤ the autopsy vids too.

[@Jrv3192]

Love the content Joe keep up the good work, just out of curiosity is there any reason you tend to pick 125 2strokes a lot these days I know it will always depend on what's available in your area but would love to see a 250 or big bore 2stroke again

[@georgeveneziano2754]

Your not very old I'm wondering how you learned all of this because you are very good at this very good maby drop a line on this a few of us would love to know thank you,

[@israelshelton230]

Love your videos even if though it causes my OCD to go bonkers. Must be a small engine guy thing to rebuild motors that have been rolled around in a dumpster without cleaning them properly. Keep up the great work👍👍

[@Bigbo614]

I watch every video bc as you learn and grow so do we. Keep it up

[@RDEnduro]

Great troubleshooting thanks for showing how

[@garyearley1838]

Wow, another bike Joe has to tear down and find other owners abuse damage.! Keep up the good work, Joe in spite of these setbacks. Love your videos, man!

[@davessparetime83]

Both sprockets and chain, crank seals, crank gear, crank, piston, water pump seals. get a good used stator plate and trigger

[@Harry-gf7ox]

I love your videos and skill Joe keep up the good work

[@tomdombrovski432]

Great video, too bad you got took on this one. I’m impressed on your calmness and not a cross word spoken, can’t wait to see part 2

[@MsJon52]

you are going to get your money back when you sell it, if you keep it it will a fun bike, if you sell it you know in all clear conscience the buyer is getting a good one, on a lighter note, I have been around diesels all my life, and they start at half a revolution, (seems like) but it always tickles me when Joe will kick and kick the bikes over and I am expecting him to say, well thats not good, but instead he says " FIRED RIGHT UP" lol gets me every time.

[@thebigguy8306]

It's a good-looking bike, now let's tear it apart. Thanks again, lots of learning moments, and diagnostics. 😭No joy riding around the property today. Squeeze in a Yamaha 250-450 in there and fly

[@Troy-f2h]

You keep it up you will be the fastest tear down guy in the world lol nice work

[@timjordan3671]

I feel like the guy discovered the problem after he tore down the top end. Then put it all back together to recoup his loss. That's why parts were loose. I have every confidence you'll put it back together tho. Could you test the CDI on a different bike?

[@matthewstuckey665]

Rough starts make the best finishes. Great work

[@Nigel-v9h]

You get some great bikes joe on your channel 👍. I like the determination you have to get these running again 😉. Good on ya love it 👍 from west Yorkshire in the uk 😀.

[@ronsherfy6291]

There’s a good reason why the seller gave up on it! He just passed his problems on to you! If you knew up front it had no spark and a bad crank now what’s it worth?

[@stanpugh212]

About $395 at most

[@fetus2280]

When someone tells me they "Rebuilt" and only Part of the engine.. I feel something isnt right. I would Low Ball them and if they dont take it id walk away. We plebs dont have the luxury of KZbin and will lose a ton of money on Junk. I have to give you kudos mate, youre a far more patient and lenient bloke than I am. Id be right back at the guys house. Good on ya. Thanks for what you do, youre helping All of us with this. Cheers.

[@fred-san]

Except Beta Techno 250 which bike do you prefer, for ballad-mountain... ? Sankyü anyway, good job & have fun$.....

[@u2pda]

Hey joe, why don't you rebuild your cranks? I know it's kind of an art, but you have skills and that may be a good next step since you are getting so many bad cranks lately. I guess maybe the rods, pins, and bearings might not be available anymore?

[@alexandercage2500]

Pretty amazing that even those bikes buyers have someplace to ride the thing. Premium price for an acre nowadays. I remember the good days in the 70's and 80's. " Freeride! "

[@AnthonyRBlacker]

26:00 it looks like he's been through all of at least where you are so far.. everything basically being 'disconnected' or loose or not even connected with a spade connector on the coil, yeah this is going to lead back to a deeper issue. Let's see how it goes, it has to be something, too bad it's not just a simple fix.

[@stkyfngrszmooth]

Question: Have you ever restored a project back to original brand new condition? It's not nearly as easy as people may think. Depending on its condition, anything that's even remotely worn gets tossed and replaced. Rarely do you use original parts except things like the engine and the frame, which can be brought back to original condition with the help of things like a sandblaster and a good quality welder. Of course, if either is damaged to the point that making it like brand new is impossible it'll get tossed too. It's a painstaking process that could end up taking much longer to complete than you would think.

[@larrywarner9314]

Where I live there is wut they call a lemon law , if someone sells you something knowing it's messed they can get arrested for it !!!!

[@ROZLETKO]

💪😎

[@DunnMotors]

🤔 isn't that for new vehicles??? I never heard of that. Wouldn't make sense on a used item. I Wouldn't want to live there man, stuff happens, buyer beware, I was always told. How could you prove they knew?

[@rintin1874]

Brilliant video Joe watching from Edinburgh Scotland UK 🇬🇧 👏 👍

[@jasoncashmore6675]

What sort rebuilds a top end on a busted big end, a bell end😆💯 love your work saving so many old classics💯👌👍💪

[@midcoasttractorservice9182]

open the camera aperture to 8 or so and put it on maual focus. Thay way everything will be in focus all the time!

[@Ramcat_Vlogs]

I’m always concerned with these kind of buys. If the previous owner is the same one who rebuilt and has enough knowledge to do that but not get it started is always concerning lol

[@markhensley9378]

A bike doesn't get that rough looking without getting rode hard, very hard! Yeah it might turn into a money pit but it has to get rebuilt by someone who is capable. That's why I am subscribed to your channel. I'm here to learn.

[@davidronneberg2643]

Man sorry about that! I bought a 2002 yz125 for 2k that had only a clutch issue said the seller and wound up having to do a full rebuild.

[@jayjudd6518]

Joe I can’t say I was surprised that it was a turd. Those sweet heart deals seem far and few nowadays. Seem like inflation has hit everything. It’s enjoyable seeing how you go about fixing these older items. Like say following from my armchair.😊😊

[@thegusk520]

More like greed, hate and lying have become the norm.

[@markjones6181]

Once again the Phoenix must rise from the ashes.....🔥 how much is a frame going for these days......🔥🔥🔥❤️👍🏽💯

[@bluecreech]

All it needs is a carb clean...😅 And stuff.

[@just4kicks950]

That's no good my friend. I bought 250 Lt quad-racer basket case. The crank was split into .Found that out after I put it back together, on it's first ride 😔. Sorry Joe 👍🫡

[@justinfloyd9936]

Thats why its best to compression test on site. But I know you buy these for a challenge at all costs. Good shit man

[@DjBud_VinD]

Bummer man, but hey again a great rebuild and video. It will be a great bike again i am sure. Big up!

[@AnthonyRBlacker]

46:57. Joe I have a pretty good feeling my man knew exactly what he was selling you, and with what you said in the beginning about how he held it for you, knowing of you, yeah.. he knew.. Even still, hopefully at a grand you're only into it for some time, a set of gaskets and seals, fluids, and hopefully less than a couple hundred in parts. It'll be nice either way. edit: at least she's got SOME upgraded parts on her.. you know.. maybe not so much the sprocket, holy smokes, but there are a few nice things the pipe the clutch basket, probably a few others.. eh

[@MM_in_Havasu]

Methinks the seller screwed you over on this deal. Hang in there Joe! You will get it ripping in no time. Thanks man!

[@andymann9861]

Man, you’ve had bad luck on the new acquisitions lately, Joe. This one may go down as the worst! Hang in there, brother.

[@RealStoriez-z7m]

Great video bro👍

[@lainerowlinson2250]

Great video mate what web site do you refer to for your trouble shooting when you were looking at specs for the coil and stater

[@LEE-jj4yk]

Joel it looks likes he’s used the crank seal too hold it so it would rotate when you removed seal crank wobbles

[@TroyRosenbaugh]

Brake clean that magneto and stator off..

[@stkyfngrszmooth]

These are the kinds of bikes that when you show up to look at it you make your worst "who farted" face, offer him a nickel ($500) and watch him jump on it. A thousand dollars is insane for a trap like this and the seller knows it.

[@Johnbruzzi4234]

Joe is sucker buyerhes a toal push over

[@tyronestucker8980]

He buys this stuff for our entertainment and content. If he didn’t have these bikes to work on he wouldn’t have a KZbin channel. I like watching joe fix these bombs.

[@74skidoo]

If crank seal is gone will it rev up if ya play with throttle can't get my 97 cr 125 to run right , clean carb , new jets and reeds are good fires up first kick 120lbs comp??

[@OldGlaseye-gf7si]

You take a bike to a shop, you pay for labor. With Joe, YT pays Him for his labor..So, even with new parts, Joe isn't losing any money..plus the $ he'll get when he sells this thing. The buyer can watch the video to see it's done right.

[@kennethgray2504]

You keep telling yourself that. Your about as smart as this channel.

[@brucebird133]

@@kennethgray2504 Your here watching it... so if you think that of this channel, says a lot about your IQ.... So why do you bother tuning in? All his vids would be doing very well with always at least 100,000 viewers, and quite a few with round 400,000 views... Also getting parts at trade, he'd be doing quite well.. Maybe you miss the point of the channel, how do you think the channel would go if he bought 100 % running bikes? Na me either. Has a great collection of bikes in the background too.

[@kennethgray2504]

The fact you think 100k views is huge speaks volumes to your expectations for entertainment. There are billions who watch KZbin so 100k is nothing. Channels like the bearded mechanic or biker stuff have viewship of up to 2.5 million per video. The fact you think a bunch of bikes in the back ground means something about he is successful speaks to you limited knowledge of business. It is clearly junk either purchased and can't be fixed or junk fixed and can't be sold because he has too much money into it and can't be recouped. Either of which is a bad cash flow decision for a business.

[@wastelandmetal]

​@@kennethgray2504 As if you have any clue how he runs his business. I'd bet his business is doing quite well, as if you go back and look through his catalog, he often finds bikes that need very little money and require mostly labor. With the amount of views his channel gets and the frequency of uploads he is making decent money from ads alone. In his niche the CPM is decent so there is no down side to buying and fixing the occasional money pit bike. He's making decent money from views alone, let alone the money from flipping bikes. And, 100k views could very well be $300-700 (or more) in his pocket which alone would pay to fix most bikes.

[@kennethgray2504]

Don't bet you would lose. And I would hate to see a fool lose their money. You have stated no facts only guessing.

[@Charles-e5v3m]

That guy that sold it to you, is sitting in the lazy boy chair, eating popcorn and watching you struggle. He wanted you have it Joe. That's sucks.

[@MrTruckerf]

Now that is going to take a lot of work!

[@AnthonyRBlacker]

Poor Joe at the very beginning was like can we just get an easy one that we can RIDE today? I just want to ride one - I guess rather than tearing the entire thing down.. no, no Joe.. there are NO free lunches any more.. you've bought up all the halfway not so bad bikes in your area. Oh man.. let's see how this one goes!!

[@angrysweet8932]

The chainlink lock is installed in the wrong direction.

[@theelectricunicyclist9069]

~ First sign that it was worked on by a hack. Many more to come.

[@smoothlover073]

Well with all the bikes that could have been used for parts. You could have had a good stator and crank. Lol always like watching your videos very informative and interesting.

[@johnkuchjr.]

I used to use those pistons all the time when I was a young bull on a budget and never had issues with them.

[@amd65ak47]

Anybody that's ever listed a dirt bike or motorcycle always says that there's a ton of people looking at this bike or once this bike

[@michaelgarland579]

I love my yz125 2003 It's awesome bike apex head an lectron carb is the way to go its so powerful an numura pistons are really good i use them wisco pistons not all that numura is better

[@maddogproductions7999]

Watch out the case protector is missing