Outstanding video! I was caught off guard by the cam lever and wasn't sure where to measure the gap. You did a great job explaining this procedure. Thanks for taking the time to put this video together. I've subscribed.
@2WR5 жыл бұрын
Thanks Daniel. Glad to hear it helped.
@palcolandcattle42595 жыл бұрын
I cringed when I saw the dirt falling off the valve cover when you were tapping it. why not blow everything clean with compressed air before you start?
@2WR5 жыл бұрын
You're right. I was just crunched for time.
@ChasinTrails5 жыл бұрын
Lol holy cow man dirt falling all over the place . First step to everyone working on valves. Wash or carefully pressure wash your bike.
@seanhathaway79254 жыл бұрын
Just bought my first 4-stroke KtM. Great video!!
@2WR4 жыл бұрын
Enjoy it!
@Doug_Morgan5 жыл бұрын
Ya I had a chuckle when you said you can't fit a thinner one through. LOL
@2WR5 жыл бұрын
Sometimes you think you said the right thing...until you watch it back 😬
@Doug_Morgan5 жыл бұрын
I do it all the time when posting.
@dandersonjr5 жыл бұрын
I perfectly understood the first feeler guage explanation so either I wasn't listening closely enough or I am starting to understand the Mario way of explaining things from watching too many of your videos but I did notice that your Back in the Garage video's are out of order since I didn't see the new fan you installed on the radiator on your last video. Nonetheless always entertaining.
@2WR5 жыл бұрын
LOL, "the Mario way of explaining things". Yeah, Back in the Garage vids aren't necessarily in chronological order. Sometimes they sit for a few months and I post them when I need to fill gaps between more timely uploads.
@T30-z5w2 жыл бұрын
There are timing marks on the left side as well.
@jasonlawrence8302 Жыл бұрын
will you work on my bike while its all muddy LMAO
@09Tedesco5 жыл бұрын
If the valve clearance is out, what impact does it have to the bike? Is it something you notice while riding?
@2WR5 жыл бұрын
Eventually you could burn out a valve or worse. You'll definitely notice if your valves are out of adjustment. It'll either be hard starting or start pinging.
@iloveyoualot42374 жыл бұрын
2 Wheeled Rider what do you mean pinging?
@tjsquib83594 жыл бұрын
Sholda cleaned that a lil mire man
@tjsquib83594 жыл бұрын
good video tho
@chris14484 жыл бұрын
How many hours did you have when you checked this?
@2WR4 жыл бұрын
Good question....probably around 30 hours. I made a habit of checking them once a year.
@darrendrinkall50023 жыл бұрын
hi i recently sent my ktm 250 sxf 2009 away to have a new bottom end fitted but it came back and you cant not kick it ive tried towing it with a car anyway what could the issuse be cheers daz
@dant5653 жыл бұрын
Hope ya took it back to the place ya had it done.
@edgaradriandesantosromo80812 жыл бұрын
Where can I get that type of tool to get the spark plug?
@2WR2 жыл бұрын
The socket itself is just a normal socket with a universal and extension on it.
@killer_fly42023 жыл бұрын
Do you check valve clearance between the cam lobe and cam lever or cam lever and shim any help would be great thanks
@2WR3 жыл бұрын
Cam lobe and cam lever
@jfricke11883 жыл бұрын
Would you get the same clearance if you measured between shim and cam lever?
@KIDLATBUHAWI4 жыл бұрын
my honda xr 150L intake tappet valve clearance is .08mm and exhaust is .12mm(standard).. i brought it back to my dealer for a tune up at 12k km odo. they adjust the intake to 0.10mm and ex 0.12mm . anny disadvantage for not following the standard clearance?
@2WR4 жыл бұрын
Will make it easier to start and especially easier to start when hot
@KIDLATBUHAWI4 жыл бұрын
yes it is now easier to start.. but do you think ther will be no bad effect with the valves ?
shouldn't have any negative effect. How many miles did that plug have on it?
@KIDLATBUHAWI4 жыл бұрын
@@2WR only 100km. i bought i 2 weeks ago
@haydenbruce27904 жыл бұрын
I need help that vent tube that comes out the valve cover mine smokes out of it after it runs for a while??
@2WR4 жыл бұрын
Not sure why it would smoke unless you'll getting a little oil leaking out around the o-ring and dropping onto the cylinder. Pop the vent tube back out and check the o-ring to ensure it's not damage. If it is (or isn't for that matter), take a bead of high-temp silicone around the ring and then place it back it. That should seal it up.
@5519nando3 жыл бұрын
High oil level
@SAMFICOM3 жыл бұрын
How to dill your engine with sand and dirt..
@pitracer19792 ай бұрын
Anyone know the specs for a Kim 250 SXF 2014
@2WR2 ай бұрын
Intake: .08-.15mm Exhaust .12-.19mm (we have a 2024 in the garage now but didn't make a video on it)
@vickeyyadav20114 жыл бұрын
Sir I have ktm rc 390 crank but not start
@2WR4 жыл бұрын
Pull the plug. If it's wet you're not getting any spark. If it's dry you're not getting any fuel. That's where I'd start.
@saltpalm114 жыл бұрын
I call bullshit, it takes a hour to get the plug out. Lol
@2WR4 жыл бұрын
Definitely does the first time you go to do it.
@madmaxmotovlog73423 жыл бұрын
Yeah wtf that's the only reason I clicked the video. I cant get the boot out to replace the cover gasket