3 AMAZING IDEAS WITH TP-4056 MODULE.

Get the Best Price at Indiamart:
Electronic Modules: dir.indiamart....
Power Modules: dir.indiamart....
Relay Modules: dir.indiamart....
Disclaimer.
video is for education purpose only. Copyright Disclaimer Under 107 of the copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright status that might atherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
WARNING:
Some ideas, And Experiment can be Dangerous.
And For that you don't Risk and Damage your self
and the Environment, I am a professional in my business
with a lot of experience!
Every video, even that is completed with compliance
with the all sefty measures. Enjoy the video and Eat the sweets.
This video is for demonstration and education purpose only.
Each demonstration presents risk and hazards
that must be fully understood before attempting.
And should be performed only by professionals -~-
#diy #diyidea #IndianJugaadHacks #hack #indianjugaad #tp4056
Materials affiliate links given below.
6v solar panel:- amzn.to/2CeMgMP
TP 4056 BATTERY CHARGING MODULE:- amzn.to/2A6E5Ao
DC MOTOR:- amzn.to/2OkRGx1
*SWITCH:- amzn.to/2OiGfFQ
*SOLDERING IRON:- amzn.to/2Oq6B8X
*SMD LED:- amzn.to/2PsgorK
*7805 REGULATE IC:- amzn.to/2OT2m5k
*3.7 RECHARGEABLE BATTERY:-amzn.to/2Ol08fv
6v RELAY:-amzn.to/2A7cAqB

[@IndianJugaadHacks]

Get the Best Price at Indiamart: Electronic Modules: dir.indiamart.com/impcat/electronic-modules.html?YTI& Power Modules: dir.indiamart.com/impcat/power-modules.html?YTI& Relay Modules: dir.indiamart.com/impcat/relay-modules.html?YTI&

[@JeffLewistennis]

Hello! Great vid! Curious what’s the minimum mAh lipo battery these boosters are able to still power a 5v sensor. I tried with a 120mAh and my sensor fades after a while. Thanks for your help!

[@KnowEverythin]

Sir ji, Idea is good.. but be practical.. when light is glowing the smd strip is going to maximum heat and also glue gun's epoxy will be melt. If any doubt do it and then told me.

[@untrust2033]

You are going to start a fire! That board offers slight protection through the outside pins, but you just soldered straight to the battery!!!!!

[@shivnandansharma953]

Last video is 👏🏻👏🏻👏🏻👏🏻👏🏻

[@ahmedamin1728]

Why protection not used in tp4056 board.. You should solder out +/- instead of both wires to bat+/-

[@robertcartier5088]

Totally correct! I was about to say the same thing. But it occurs to me now that the Samsung battery that was used already has built-in protection.

[@何馬士]

I want to ask the same question too. If protection is not used，can buy another version with charging function only. Cheaper in price.

[@adityasrivastav8359]

मोबाइल की बैटरी में शॉर्ट सर्किट प्रोटेक्शन होता है

[@sosis_anget]

Great!

[@IndianJugaadHacks]

Thanks

[@bsspt]

This video makes me reconsider the definition of amazing.

[@enginozkan7268]

What is RELAY for ? What is the fuction of it ? Can I charge through micro USB with phone charger in this project ?

[@itzmanny8905]

Bhut badhiya video Bhai tere video se ek problem solving ho gya

[@IndianJugaadHacks]

Thnks

[@funnyshorts-wv7dm]

Can i use fidget spinner plastic box ?? and mein cold drink bottle use kar sakta hun tread cone ki jgha? Reply me

[@KHOAIHOANG81]

Very Good...!!!

[@km-kk5oz]

Bhai lead acid(Li ion nehi) battery 4v charge karne ke liye mobile charger 5v use kar sakte hai ?

[@priyansijewellers1199]

Nice project 👌

[@IndianJugaadHacks]

Thanks

[@odddreamers2404]

beautiful lamp

[@IndianJugaadHacks]

Thnx

[@encarnacionian]

my lead acid battery not working in this tp4056 module. what way to work

[@xdtroncico]

Can it leave it connected to the power suplyy?

[@simondavid316]

Good video using some things

[@IndianJugaadHacks]

Thanks

[@ramsundar.yadav.yadav.7227]

Sar ye modul se tirimmer Ka 3v Ka battery chargerj Kar Sakta hai

[@Vertigo8750]

It is possible that this circuit will provide 4A current by marely changing resistor.. if not any 2A/ 3A output hack

[@senterterapibioglass3677]

You can use TP 5100 charging module.

[@prakashsuryawanshi6211]

can I use this board as a bms,? For drill machine battery lithium 3.7volts 2500mah *2nos.

[@teguhputrap8203]

how many Watts of solar panels do you use? , Please respons

[@christopherf8160]

What kind of hot glue is that? I tried to make a charging circuit with this TP 4056 board (with the battery protection) and hot glue, and the glue only lasted about 30 seconds before it re-melted. The circuit does not get that hot, but warm enough.

[@naushad4230]

For the last one can I use a 5v relay please reply

[@imtiazhossain6626]

Toooo goood 👍👍👍👍🤔

[@IndianJugaadHacks]

Thanks

[@konstantinonassis7015]

love you brother, thank you for the video!!!!

[@IndianJugaadHacks]

Welcome

[@randamnly0708]

Does it really charge the battery i have bought one but it does not shows blue it always in red light

[@electronic7979]

Good ideas 👍

[@IndianJugaadHacks]

Thnks.

[@shivnandansharma953]

Sir make a same video with ldr this working only High sunlight I made same after watching your video

[@Tan_cannon]

Does this really work with 4v lead acid battery you used in the 3rd part?

[@MrBobWareham]

Can you charge LiFePO4, battery with this tp4056 board

[@taunteratwill1787]

There must be a huge market in India for diy CRAP!! :-))

[@rajendraharsora8006]

Superb vedio Bhai sabkuchh samaj me aa jata hai.solar kit kaha se milegi please answer.

[@IndianJugaadHacks]

Amazon se.

[@IndianJugaadHacks]

Link video ke description me diya hai.

[@rajendraharsora8006]

@@IndianJugaadHacks Thanks for reply Bhai 👍mene aap ka chenal subscribe kar diya he.

[@IndianJugaadHacks]

👍

[@a28101950]

Hello, very very good lantern. Pls., help me : were can i purchase the 4VDC LEDS strip. Thank you in advance, Sergio

[@IndianJugaadHacks]

Link given in video description.

[@a28101950]

In your description Is not the same item. I tried to find this you used but i didn't find. Can you help please, TNXS!!

[@a28101950]

Pls., give the type of the 4V led used in your LightFlash - TNXS

[@IndianJugaadHacks]

Please find 4v smd led strip in online shopping websites.

[@dees790]

You can also get from flipkart

[@jayakrishnans2785]

Good job

[@IndianJugaadHacks]

Thnks

[@shivnandansharma953]

Si I have done bt tez dhoop m hi kaam kr raha hai relay thodi si kam dhoop hoti hai to led onn ho jati hai give solution

[@alexandrealex9012]

Vraiment top. :-) Jolie vidéo.

[@IndianJugaadHacks]

Thnks.

[@IndianJugaadHacks]

Thnks

[@izkur-teghpl4t.l138]

One batrey.. How Batrey 2S 7.4V..? Make modul like what?.. Thx brother

[@anmolkashyap9875]

Bro 3.7 volt ki mobile battery charge hogi

[@IndianJugaadHacks]

Yes

[@anmolkashyap9875]

All mobile battery charge hogi pakka

[@vinodgupta2608]

Where i will get battey charger kit , i used to live in Mumbai

[@IndianJugaadHacks]

Link in description

[@dmswamygowda5371]

good idea

[@IndianJugaadHacks]

Thnx.

[@smnvsinnovations2295]

Good...

[@IndianJugaadHacks]

Thanks

[@shivnandansharma953]

Sir answer dejiye kam dhoop m led off nai hoti

[@ginnyellaannbroughton5581]

You earned my sub good job bro

[@IndianJugaadHacks]

Thanx

[@edwardallen6175]

using 2 solar panels, one 6v for charger one 5v for the 5v relays . I did not want the relay to take away power from the solar panel for the charger and slow down the battery charge time. so I gave the relay its own panel power source.

[@anandhu3485]

what is the out put voltage

[@Fapic]

hi, should the load be disconnected when the battery is being charged?

[@kac3514]

No need, you can draw current from the output when it is charging

[@sugeshpa1064]

Two battery outputs are there in the board pls tell for what purpose

[@IndianJugaadHacks]

Not two output for battery one output for battery and one output for device

[@prasaddate5471]

In first project you have connected battery wires and LED wires together. But in fan you have soldered battery and fan on diff terminals. Are you using battery protection in second project ?

[@adityamourya]

Sir I use 18650 battery 4no., With one Tp4056 module and connect with solar panel but relay was not operate. My relay spec. Is 50/60hz jqc-3fc(773)DC06v. Please send a specification of Relay.

[@kailashchoudhury1273]

Bhi aap power bank ka sarkit bord kaha se parches korte ho

[@IndianJugaadHacks]

Amazon

[@deepaakkumar786]

Nice..

[@IndianJugaadHacks]

Thnx

[@IndianJugaadHacks]

Thnx

[@ModifywithManoj]

Nice

[@IndianJugaadHacks]

Thnks bro.

[@HassanKhan-qq6ck]

Sir dose your module heat while charging.????

[@IndianJugaadHacks]

No

[@HassanKhan-qq6ck]

But when I connect my battery to module, while charging it heat very hot

[@wreckless_-jl6uu]

Hassan Khan then theys too much voltage to it..

[@mattkaczmarczyk6953]

Great work

[@IndianJugaadHacks]

Thnx.

[@jordarvideo]

Power bank ki 4 batri laga sakte he kya is bord me

[@IndianJugaadHacks]

Laga sakte hai.

[@franciscomillan8916]

# cool

[@IndianJugaadHacks]

Thnx

[@anmolkashyap9875]

All mobile battery charge hogi

[@IndianJugaadHacks]

Yes

[@manabendrasarkar5226]

nice

[@IndianJugaadHacks]

Thanks for your valuable comment

[@komentator2024-s9u]

Nice and clean looking lamp! Im impressed!

[@IndianJugaadHacks]

Thanks

[@Akc64]

rly??? for load on this module have other place like "out +/-". In other way u will kill your battery

[@IndianJugaadHacks]

Thnks for comment

[@ArunG273]

That guy is stupid. He's putting stupid video for views.

[@miteshdhanani]

If we don’t want to connect it with led strips and want to connect it with 1w bulbs or less then 1 w ?

[@DrCRPS]

Mitesh Dhanani uni

[@marius-gabrielpopescu675]

O idee buna , dar aplicata gresit. Se leaga sarcina la TP 4056 la bornele ,,out" A good idea, but applied incorrectly. The load is connected to TP 4056 at the "out" terminals

[@DiyintheGhetto]

Hello very nice video but the smd led module link is not the same as the ones in your video.

[@IndianJugaadHacks]

Thnks

[@sathishkumarsivapatham2803]

Can I use negative terimal wire in switch?

[@IndianJugaadHacks]

Yes

[@amitkapoor5255]

Kha sa mille ga cip j kon c ha name Kya ha

[@rajneeshsingh3396]

Ye board konsi market m milega

[@IndianJugaadHacks]

Link in description

[@shivnandansharma953]

Relay 5 volt kabuse kiya maine

[@SantoshPaswan-zk4zv]

Sir ye shircut mujhe chahiye mujhe kahin bhi nhi mila

[@IndianJugaadHacks]

Link in description.

[@sushant3490]

Flipkart par available hai Search Karo 18650 charging module

[@javilarg]

Man, you’re overriding the protection circuit against overdischarge. Not a good idea.

[@IndianJugaadHacks]

Thnks for comment

[@ShakilKhan-ij4gp]

It's a amazing....👍

[@IndianJugaadHacks]

Thnks

[@ananthpadmanaban7510]

Bro pls explain me how to connect lead acid battery with mobile charger to double pole three way switch

[@oxor68]

Whenever i use a Li-ion battery do i have to use the TP 4056 or can i use directly the USB cable connected to the battery?

[@IndianJugaadHacks]

Yes! If you use Li-ion battery you have to connect TP 4056 MODULE .

[@priyadharshini-kf1hd]

Can it charge 3.7v lipo batteries

[@IndianJugaadHacks]

Yes

[@rksoni2914]

bhai ye kitna ampire ka relay hai

[@dantoniogiulio]

bravissimo. complimenti!

[@IndianJugaadHacks]

Thnx.

[@samsanjeevproduction8197]

Bro aap kitne watt ka solidring iron use krte ho

[@IndianJugaadHacks]

25watt

[@bestvideos7700]

25 Watts ka soldering iron

[@hasanhuseyingok394]

this module good work with 6v solar panel

[@IndianJugaadHacks]

Thnx for comment.

[@calvin-7540]

Can the battery run on the device if the batgery is being charging

[@fayangaming2696]

No It Will Kill The Phone Immediately Because There’s 220volts going inside the mobile battery slot

[@vk912399]

My to 4056charging modules red led never sunt off after I charged 3hours, 🙏plz tal me why it's countnusely charge and never stop with 2000mah lithium battery??

[@Mr.invento707]

Bro I charge my self made neckband 2200 mah battery ... It charges within 20-40 mins... Blue LED also turn on....

[@jaygupta4825]

How much time it take to charge 4000 mah battery

[@UBsLab]

It would show that it is charged because this module is designed for charging 18650 li - ion battery only which ranges to 1500-2500 mah

[@rksoni2914]

bhai ye kit ke bina nhi bnega solar lite kya

[@IndianJugaadHacks]

Nahi

[@miteshdhanani]

Instead of charging it with charger can we connect it with 3w 6v solar panel and is there any extra item to be connected

[@judeareola6026]

Tp4056 can handle up to 8v. Charging via 6v mini solar panel is ok.

[@solarenergy74]

Как говорила у меня в школе учительница "за идею 5, а за реализацию 2!" Можно было немного постараться и реализовать все получше и по красивее! Но все же like за старания! ;-)

[@IndianJugaadHacks]

Thnx

[@IndianJugaadHacks]

Plz write in English.

[@solarenergy74]

@@IndianJugaadHacks As spoke my school teacher "for the idea of 5, and for the implementation of the 2!"It was possible to try a little and realize everything better and more beautiful! But still like for the effort! ;-)

[@IndianJugaadHacks]

Thnx

[@miteshdhanani]

Y is the relay attached not seen in any other type

[@АлександрГребенкин-н2ц]

Почему подключил аккумулятор без контроля разряда?

[@teodormatiu5308]

It is not recommended to use hot glue on battery, charging module and leds.... Charging module and leds are turning hot and melt the glue

[@samfisher1890]

In last project what does the 12v relay do?

[@samfisher1890]

What does it do? I'm unsue3

[@samfisher1890]

Unsure

[@dhansantv395]

The 12v relay cut the voltage from the source to the led when sun energize the panel because the output of the pan el solder directly to the relay coil

[@kaifalvi4307]

Charging module kha par milta hai

[@IndianJugaadHacks]

Amazon link given in description.

[@luckyrathod5345]

Does it charge 18650 li ion battery

[@IndianJugaadHacks]

Yes! It can charge 18650 li ion battery.

[@luckyrathod5345]

@@IndianJugaadHacks kya do battery ek sath parallel jodkar only one TP4056 SE CHARGE kar sakte hai

[@CBGarage]

@@luckyrathod5345 yes why not but it will take more time to charge

[@Geniusinventor]

Hay you mess the over discharge featur

[@IndianJugaadHacks]

TP4056 is battery charge with protection

[@depopa1033]

this is like a 70s movie, the dialogue is like 50% volume while music is blasted at 250%

[@sandeshthapa4497]

At which online shopping app you buy all this materials Plz send back comment Plz Plz Plz. ?..

[@miteshdhanani]

It’s nice but u have not attached a switch

[@IndianJugaadHacks]

Thnx sir and I will remember about same things.

[@murtikarsantoshprajapati2248]

Sir isse 1 0000 mah ki battery ko char g kar sakte hai ?

[@Davidslabofficial]

Ha lakin bht dayr lay ga

[@raghubhaibharvad6715]

Solar charger controller banvo , ....

[@IndianJugaadHacks]

Hah... Hah...

[@edwardallen6175]

can I use 5v relay

[@IndianJugaadHacks]

Yes

[@gowtham.maya.6263]

Bro when battery charge and output is released at same time how to fix it plz

[@Davidslabofficial]

It's charger output not a problem

[@qamarqamar7536]

Bro Ur 4056 Module Selection is Wrong ,b'ocz ur Not Using Protection Circuit Of This Module,Use 4056 Without Protection Circuit Module⚘

[@JamiePineappleWyatt]

Hey man, get your hands on a shitload of double sided tape, so that way you can eventually and inevitably pull everything apart to make something new one day ;)

[@VIGNESHS-op5sd]

I will connect for your structure correctly but the battery cannot charge and the blue light is flash

[@IndianJugaadHacks]

Plz check battery.

[@VIGNESHS-op5sd]

I use samsung battery its condition is Good

[@IndianJugaadHacks]

Oh! Then you have to check output Voltage by multi meter.

[@VIGNESHS-op5sd]

What's voltage battery op or module op

[@VIGNESHS-op5sd]

And how much of its voltage have