3 amazing tricks for uniformly TIG welding the uneven gap at 1mm sheets

Hello everyone.
thin sheet welding
Sometimes, when there is an uneven gap between thin sheets, you may have trouble choosing a welding method.
Today, I would like to introduce some tig welding techniques that can be selected in this situation.
Spot welding, pulse welding, cold welding, etc.
If you are familiar with these techniques, try reducing the delay time little by little.
Then the working time will be shortened little by little.
Of course, this is not 100% correct.
Since it is a welding method with pros and cons, I think it will be helpful if you apply it little by little.
Thanks for watching and have a nice week.
#thin
#welding
#techniques
#interesting
#HAGOJIBI
#TIG
#video
#sheet_welding
#spot_welding
#pulse_welding
#cold_welding
#Tig_welding
#argon_welding

[@flatwater5]

Want to learn how to weld? Come sit at the feet of the Master, HAGOJIBI! Another demonstration of absolute excellence. Thank you for sharing your skill set, Sir! Salute!

[@kcgjun]

매번 다음번 영상이 기대 됩니다 오늘도 잘 봤습니다 감사합니다^^

[@donngo6744]

Thank you for your sharing it's great and I will wait for your next video

[@Kulak-223]

Сам учусь сваривать! Ещё раз Вам спасибо ! Ваши видео очень помогают!

[@stefanfuckert1677]

Hallo. Das Video ist der Hammer. Danke.... Das ist besser erklärt als alles was es in Deutsch gibt.🤗

[@user-vq9iv4id5e]

끝내주는 작업 팁이네요 ^^; 특히 맨마지막 방법,.... 예전에 차체 수리 초 박막 용접 할때(30~40년전 문짝이나 휀더 철판으로 두드리고 접어서 만들어서 수리하던 시절 ) 가스 불대로 용접 할때 애먹었던 기억에 비추면 진짜 장비가 너무 좋아졌어요 ^&^; 물론 장비보다 작업자의 경력과 기술 그리고 작업팁이 더 중요하긴한데,... 예전에 후배 기술자 에게 인색하게 기술 전수하던 못된 오야지들 기억하는 세대로서 이런 작업 팁은 주옥 같은 내용입니다. (물론 경험해보지 못한 일반인은 이게 얼마나 엄청난건지 모르겟지만 저같이 업계밥먹어본사람은,... 그냥 칭찬밖에 못하겠네요 ^^;)

[@edisonlima550]

É assim mesmo parabéns pra vc feliz natal 👏👏👏👏👏

[@tepongoagatas1758]

Good work as usual teacher!

[@alknis]

Хорошее познавательное видео. Я бы предпочёл второй вариант. Но и холодная сварка тоже даёт неплохой результат. Спасибо👍

[@sergeylenin401]

Спасибо, как всегда интересно и познавательно. Очень хорошо что вы делитесь с нами опытом. Ещё раз огромное спасибо.

[@geraldstanley9692]

I love your videos. My welding has improve so much since I followed your advice and techniques, especially thin sheet metal. Thank you!

[@MrEudgen]

Your work and video helps a lot. You can always see something new. Thanks!

[@user-jp8vl7oh9q]

2T이하 써스작업 많이 하는데요. 선상님의 영상을보고 정말 많이 배우고 있네요.

[@Among529]

Todos os Domingos sempre assisto e já esperando o próximo vídeo.

[@starwars910]

I just wish I had access to pulse tig. It looks way more useful than static. Great video!

[@patricksalmon3494]

Mais,mais si.Vos méthodes sont toujours les meilleurs

[@MyMascalzonelatino]

nice explanation, I often have to cold weld to reduce the deformation of the sheet.

[@LikeAPetrol]

Can't wait for the next vid. Thank you for sharing your experience, seonsaengnim.

[@changhoolee1067]

영상감사합니다 과도한 알콜로 인한 수전증이라 잘안되네요 ㅎㅎㅎㅎ 잘보고 갑니다

[@hectorr814]

EXCELENTE VIDEO¡¡... Y MUY FACIL DE ENTENDER¡¡...SALUDOS DESDE MEXICO¡¡

[@ockenden]

Brilliant video. Lovely welding ideas! Thank you for this, I will definitely use these methods. Thank you!

[@Kulak-223]

Благодарю Вас Мастер !

[@fabriciogomes5634]

Parabéns ! Vídeo aula muito boa . Estou aprendendo muito com suas informações 😃

[@therealspixycat]

Thank you very much for this very nice informative video. I realise that I miss one feature on my Cebora welder which is the percentage which is on my simple TIG welder unfortunately always 50% which is not enough. So I have to somehow resort to option one which is to manually inject the 100 amps for a very short time. Thank you again for helping me finding a solution for welding thin sheet metals sir

[@sandiedaonker4054]

g00d j0b,,,,👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@user-rf7ru3if6r]

будет очень хорошо если показывать и обратную сторону сваренных деталей

[@badcat2922]

Да, требуем продемонстрировать обратку.

[@user-uk8px2xi7y]

역시 믿고보는 후비고님

[@user-ld2kb7ie7u]

молодец! респект и уважение!

[@bps3374]

Nice DIY however... See u can what u doing 😁✔️ happy weekend

[@MrChapunocioni]

Muy informativo como siempre aportando 👌

[@bk_seoul1627]

Very useful videos. I recently started making custom exhausts and learned a lot from your channel. Also using NST AC/DC 300ID, because it can be used with pedal 👍

[@welderleekoreanwelder4273]

ㅋㅑ..역시 ㅎㅎ 잘보고갑니다😄

[@NelsonBarbero]

Exelente cómo siempre!!!!!!! Gracias por compartir!!!!!!!

[@user-lu1so5qo1d]

좋은 영상 감사 합니다

[@viorsa8200]

Excelente tutorial maestro , como de costumbre clase magistral , muy bien explicado , varias formas de realizar un buen trabajo , gracias por compartir sus conocimientos y experiencias , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜

[@TheHoviat]

Love your work, I would love to see tig welding on thinner sheet metal like car panels

[@user-fo2io2xi7d]

감사합니다 숙지하고 배웁니다

[@WELDERITOYTV]

Amazing technique 👌

[@Among529]

Bom dia mestre.salve salve Brasil 🇧🇷.

[@vokchige3286]

와... 손 안 떨리시나... 전극봉 1번 붙을 법도 한데....

[@enitwalter1344]

as always.. very informative video.. i do struggle weld thin sheet all the time..

[@douglasmistarioso3611]

Obrigado pela aulas

[@geingo]

Danke, das war für mich sehr hilfreich.

[@user-sk2jg8uj1g]

Thanks teacher

[@tomthompson7400]

Always great information thank you for showing us ... happy Xmas to you hope the year ahead is a great one.

[@weldHAGOJIBI]

Thank you. Have a happy X-mas and Happy New Year to you too.

[@unlucky_16]

Thanks....

[@taiwanluthiers]

I referenced these videos and a lot of TIG welder hates pulse or cold weld for some reason.

[@edisonlima550]

Muito bom gostei 👏👏

[@kasparroosalu]

What does the back-side look like?

[@weldHAGOJIBI]

The back side was not purged because it was not about the back side

[@IndoVR]

Can you make video on how to choose a tig welding machine

[@nuneznaiu4512]

Молодец! 👍

[@viesen3972]

Với video này , phương pháp hàn TIG của bạn nhìn nhất tốt , không bị ánh hồ quang che lấp

[@user-ht3rw7og3i]

2T짜리 판 때울때엔 텅스텐 3.2보다 2.4가 더욱 유리한가요??????????????????

[@21gioni]

Foot pedal control gives you the same flexibility and control over your weld heat input and penetration. All these methods are useful. I have updated my TIG I am an old school welder learning my trade in the middle of 1970s, do you have a video that teaches about all the settings? I am sure I do recall you doing one but can’t find it.

[@weldHAGOJIBI]

As of yet, I don't have a video of all the setups on the welder, but the welder review video includes setups.

[@TheInsaneHoster]

Fair play you always make good content keep it up 👍🏼, is there any chance you could make a video on welding stainless square butts on sheet metal with no gap on how to get root penetration ?

[@py4uk]

top das galaxias ......

[@hesemere2854]

Mantaaap bro

[@welderart81]

Very nice

[@abdullahmohamadd2701]

جميل جدا

[@user-pv6ci5rs2b]

좋아요

[@rinopravato1285]

gracias

[@joemariobraga4587]

Answer me a curious question. What is the difference between MIG and laser welding?

[@parkg9bon]

하고지비님. 저도 내쇼날250FDM 용접기를 사용하고있는데...스텐1.5T용접하는 값좀 알려주세요...용접 초보입니다.

[@estelalopez674]

Gracias por tu contestación,disculpa te puedo realizar otra pregunta,estoy en el aprendizaje con soldadura tig, existe radiaciones al soldar ,y puede ser perjudicial al no soldar con guantes de cuero

[@user-vi29w8nn7o]

спасибо!

[@user-no5nm2fj1m]

Очень хорошие навыки сварки, лучше чем у русских обзорщиков - учителей.

[@estelalopez674]

Gracias por tus buenos videos,porfavor m puedes ayudar con las especificaciones de la guantes q utilizas para la soldadura tig ,y dónde yo los puedo comprar.gracios por tu respuesta

[@weldHAGOJIBI]

Los guantes que utilizo no son guantes de soldadura TIG. Estos son guantes de algodón recubiertos de goma. Si suelda mucho, sus manos estarán calientes.

[@user-mc5ku7dt7d]

첫번째 방법 처럼하면 핀홀은 안나나요

[@paulm.9105]

Cool video! In my case I need to weld 0.5mm stainless steel 316 pipes from sheet metal (no backing plate will fit) and it just keeps burning holes... Is it possible to weld 0.5mm ss? Thank you!

[@davidecauli9166]

Grazie

[@user-se9hm7jx6l]

Благодарим...

[@user-rf7ru3if6r]

it will be very good if you show the reverse side of the weld

[@inprezagtr]

不好意思 請問有拋光的教學嗎 想知道韓國的拋光方式跟台灣有沒有不同～^_^

[@estelalopez674]

O es solamente por motivos de temperatura ,descargas eléctricas o solo es por temperatura

[@gevybiazon8980]

can u try tig too on galvanized steel sheet of gauge 17 thickness

[@user-zu7th5yb8f]

용접봉을 먼저녹여서 붙인다 여기서 텅스텐봉이 용접봉 어디를 겨누어야할지요 가끔씩 용접봉이 뭉치는 현상이생기니 기준점을 가르쳐주시면 감사드립니다

[@weldHAGOJIBI]

정해진건 없습니다. 녹일 양에 따라서 정하시면 될거 같습니다. 필요량에 따라서 적게 녹일때는 용융풀에 가까울때도 있고 많이 녹일때는 용접봉 윗부분을 향할때도 있습니다.

[@user-zu7th5yb8f]

@@weldHAGOJIBI 감사합니다 얇은 박판쪽에서 일하고있습니다 정말 많은 도움이 됩니다 감사합니다

[@user-wc2fr3rq3r]

Добрый день. Помогите выбрать компактный аппарат для дома,но ничем не хуже промышленного. И ещё вопрос. Прерывисто так чётко не получается как у вас. Как у нас дедушки говорили раньше" пирожками" накладывать швы

[@hobbyholic_LoveLive]

NST-250FDM 모델은, 스팟용접 시간의 범위가 어떻게 되나요?

[@weldHAGOJIBI]

영상 아래 설명란에 사용된 티그용접기와 냉간용접기 링크 달아놨습니다. 상세 내용이 포함되있으니 참고하셔요

[@user-hg3rg6rt1i]

👍

[@hasanaslan7921]

kolay gelsin cok güzel anlatıyorsunuz elinize emeginize saglık amabi türlü pratik yapacak imkanım yok sizin burada calışan bi firma yada egitim veren bi yer varmı teşekkürler tekrardan kolay gelsin

[@user-rf7ru3if6r]

please show the reverse side of the seam

[@user-fu3gj9ib7p]

😲😇⭐👍

[@user-rf7ru3if6r]

сварочной ванны не видно никогда, просто вспышка и всё

[@user-vm7bw6gj9e]

이분은 점용접 엄청 좋아하네 ㅋㅋㅋ

[@jorgefernandezacosta8401]

Falta continuidad, prolijidad y brillo, y no se ve el "BAÑO DE FUSIÓN".....,.... pónganse las pilas

[@ANDY-we7mr]

May be a 1.6 wire

[@user-yo6ll5ii9z]

노래만 바꿔도 구독자 100만은 되겠네...

[@user-ti2dj4sb6v]

Аригато

[@1funt]

좋은 시간. 그러나 레이저 용접은 두꺼운 금속에서 어떻게 작동합니까? 그리고 어떤 두께의 레이저 용접이 용접할 수 있습니까? joh-eun sigan. geuleona leijeo yongjeob-eun dukkeoun geumsog-eseo eotteohge jagdonghabnikka? geuligo eotteon dukke-ui leijeo yongjeob-i yongjeobhal su issseubnikka?

[@pairojkoree4504]

Sawasdee.MASTER