3 Anti-flickering solutions for LED headlights - What is a decoder and how to install?

Рет қаралды 96,178

Күн бұрын

Пікірлер: 30

@TheMuskyMafia Жыл бұрын

I have a car with auto stop start and when my car turns back on at stops I get one quick flicker I assume because the engine draws enough power to make my voltage drop below the working range of my led drivers, will this have any impact on that or no? Like I need a capacitor inline or something

@Xcz830 9 ай бұрын

Hi friends. Do you know if this can work on a vectra c 2006?

@Iharo1987 11 ай бұрын

Will a decoder work for my issue novasight cb6 I have a 07 jeep compass and the issue is they turn off and on both sides do it not same time though

@miawldr9511 Жыл бұрын

2010 Honda crv daytime running lights flicker, will this fix it?

@leonlondono4372 Жыл бұрын

Thanks for the video very nice and good Have question ? The Novsight CB6 Decoder works on 2015 Toyota RAV4?

@NovsightAutoLighting Жыл бұрын

Hello, yes, it should work on the Toyota

@TheNekry1 9 ай бұрын

LED headlights HIGH BEAM blue light on the dash lights up immediately, but High Beam bulbs lights up with a delay of 1-2 seconds. Is it an issue with ballast or smth else?

@feelxcharbz 2 ай бұрын

Excellent video

@NovsightAutoLighting 2 ай бұрын

Thank you for your recognition of our work! 💪 Your encouragement is our motivation to keep creating.

@themountain6437 Жыл бұрын

i had a Toyota mark 2 jzx110, has an h4 as foglight in the headlights (not the bumper). while using novsight it flickers on low beam, however works fine on high beam. tried using canbus but the headlight it is connected to stays on high beam but the other light works perfectly fine. and vise versa while using canbus on the other headlight. any solution for this? currently using 3 holders one for canbus(since it was causing the light to stay high the holder is free from connection) other two for the LEDs. works fine but not sure if its okay?

@NovsightAutoLighting Жыл бұрын

If the H4 only works as high beam, that might be because the decoder didn't work in your car module. Please contact our customer service to acquire further solutions.

@themountain6437 Жыл бұрын

@@NovsightAutoLighting please share a link

@califas69 Жыл бұрын

Will this help with the led headlights on my 2002 F150 harley davidson edition truck, ever since I switched to LED bulbs in the headlight the radio stations from far away 50 to 100 miles away now sound with static due to the lights. When I had the halogenated bulbs the stations used to come up clean loud and clear. Will this help with the led light static on the radio?

@garrettgiuffre7298 Ай бұрын

First, I would try putting halogens back in and see if that fixes it. If it does fix it then I would try this. But perhaps you need to shield the LED bulbs that you have to prevent it interfering with your radio. Or maybe somebody disconnected it on accident when installing the headlights. Who knows

@MrHeroe27 Жыл бұрын

It works with corolla 2010 high beam drl?

@NovsightAutoLighting Жыл бұрын

Hello! Yes, it should work. There are different types of decoders for different types of LED bulbs. Please confirm the LED type on your car and select the corresponding one.

@jaykulot9166 2 ай бұрын

This is my problem.. when I changed the headlight of my car to Novsight N39, the high beam indicator in the dashboard is not working..

@NovsightAutoLighting 2 ай бұрын

This is most likely a decoder issue. Please visit our official website and contact our online customer service. We will provide you with a perfect solution.