Update on ride: The shock extenders worked perfectly and the truck rides just as smooth as stock with the benefit of being able to replace with factory spec shocks.
@prestonshobe3 жыл бұрын
Thanks for the update. Does the steering feel any different? I'm considering doing this to my 1999 with 165000 miles. The truck steers/rides like a Cadillac so I don't want that to change much if I do this. Thanks man.
@AllThingsBoost3 жыл бұрын
@@prestonshobe Everything feels the exact same as it did before!
@Reviewerguy12282 жыл бұрын
Any noise with removing the isolator?
@AllThingsBoost2 жыл бұрын
@@Reviewerguy1228 no noise from removing it
@timoteomartinez81805 ай бұрын
Wear I can buy the shock absorbers extensions?
@Parker_CR3 жыл бұрын
Glad I’m not the only one with a 2wd
@That_Guy_JL3 жыл бұрын
Bro for real lol
@codcade3 жыл бұрын
Facts, I have a 3rd gen lol, I’m doing plus 2 springs, a bit better and safer suspension
@MrZanderYT3 жыл бұрын
Bro I got a 2wd drive too!
@LeroOfTheKodiak2 жыл бұрын
I got a 2wd 1997 1500, 5.2l Magnum with auto tranny. Like all the worst possible options for this thing. I wasn't looking for a truck when I got it, I just needed a vehicle for cheap to replace my beater work car (a totally worn out 98 Lumina). My boss sold me the Ram for 1k, and it runs just fine, and it's easy to work on. It turned me into a truck guy when I was previously just a car guy. Now there's all kinds of things I wanna do to it, and fuck all the haters telling me the 2wd is shit, most of the time the guys with 4x4 never use it anyway. I'm not a mudder, I never go off blacktop or dirt roads. It's to get me from A to B but I wanna make it look good while I'm at it.
@eduardo86522 жыл бұрын
@@LeroOfTheKodiak same with me man, I have a 2001 1500 5.2, 2wd. The thing is the most reliable truck my family has ever owned, I got it passed down through the family and it runs great. I’ll never go muddying in it, or do any hauling with it really at all, and for the most part it’s what many call a "pavement princess". The amount of times that I see these guys say "why would you lift a 2wd?" Like bro, why do you care, I want my shit to look good man, stop asking why and help me out here. I understand the appeal and practicality of a 4wd, but I don’t have it nor do I care.
@DanielRodriguez-eg7em Жыл бұрын
Straightforward, video, editor easy to understand thank you I have a 2nd gen dodge and this is exactly what I needed to see. Thanks for sharing
@Twobarpsi3 жыл бұрын
You really made this truck worth a million! Great project!
@AllThingsBoost3 жыл бұрын
Thanks brother!
@Twobarpsi3 жыл бұрын
@@AllThingsBoost 👍🍺🏁
@nabucodonosorramalha38122 жыл бұрын
@@AllThingsBoost brother can You give me the complet kit part number for front and Rear side I'm from Panamá and here I can't find the complet kit, I should Buy in usa but I need the kit part number please. If you can give me Your phone number and So that I can contact to You For more information. I preciate the help that You can give me.
@AllThingsBoost2 жыл бұрын
@@nabucodonosorramalha3812 all the parts I used are linked in the video description
@bulldograil26912 жыл бұрын
Just installed this exact kit on my 2001 Dodge Ram 2500 2wd Cummins and it look nice and drives good 👍 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤣👍
@BeamOh123 жыл бұрын
😂 16:54 when you said the peg was too big for the hole on the block. I literally said out loud "he's gonna drill it"
@AllThingsBoost3 жыл бұрын
Phrasing 🤣🤣
@jeepman146711 ай бұрын
Thanks for the video I am going to do the same on my truck but the link you have for the 3" Supreme Front Spacers on Amazon show only 2" or 2.5" available. Did you use the 2.5" spacer? Thanks
@rcmc12563 жыл бұрын
This is the exact same truck I got and the same lift I just bought perfect video man love how the truck is coming out.!
@AllThingsBoost3 жыл бұрын
Thanks! I'm loving it too!
@bfekennels21533 жыл бұрын
Nice truck! Great job
@hjk4603 жыл бұрын
That so crazy I just bought those same tires and also thought might as well level the front
@baltimoreboy910 ай бұрын
I got a 1998 ram 1500 5.2 and i lifted it 3inch and love it i can run 33s on it with 2 inch spacers no issues
@AllThingsBoost10 ай бұрын
I ran 33x11.50s with no fitment issues after installing this, so yeah you should be good!
@baltimoreboy910 ай бұрын
@@AllThingsBoost would u do 3 inch lift shocks or standered shocks with the extension.
@AllThingsBoost10 ай бұрын
@@baltimoreboy9 shocks if you can find the right ones. I couldn't track them down which is why I used the extenders.
@platinumdetaling131411 ай бұрын
I have the same setup on my 94 Dodge ram 3500 and my GMC Sierra c1500 I use a inner spring compressor and makes it safer and easier.
@rileywatts66022 жыл бұрын
Looks great man I need to do the same on my 3500 service truck, what front bumper/guard is that?
@AllThingsBoost2 жыл бұрын
I think ranchand makes a similar one, but this one is unmarked and came on the truck when I got it.
@ChrisCarty-r2v3 ай бұрын
So they say they will not fit the extended cab but did you put them on the extended cab? I am very confused on if the spacers fit the extended cab because they say thT they don’t.
@AllThingsBoost3 ай бұрын
Yep. They fit. No clue why they say that. Its identical
@bustamantealdo Жыл бұрын
I installed this same kit on my 2000 ram 2500..one side is higher by almost an 1”..I’ve rechecked everything,both look normal..one side I couldn’t get it aligned to my liking..the side the that’s higher..maybe it seated wrong? I’m thinking about taking it completely out and getting realigned but I hate the rake from factory!
@AllThingsBoost Жыл бұрын
My truck was also about an inch difference. No clue why and I never measured it stock so I have no idea if it was the lift or just how they are
@oldcroneysgarage97393 жыл бұрын
That truck reminds me of my dad's old Dodge truck
@SteveEngland-w3m Жыл бұрын
When I click on the link for the spacers it only gives me the option for a 2” or 2 1/2”. The kit on Supreme Suspension has it listed as a 3” but it’s out of stock. Is your link for the same one you installed?
@NBSZEUS3 жыл бұрын
Truck looks good man
@AllThingsBoost3 жыл бұрын
Thanks!
@kipmyers589711 ай бұрын
Great video thank you I'm wanting to do that to my one ton
@kipmyers589711 ай бұрын
Do you know if the kit you used is still available? Do you still have your truck if so how many miles do these trucks average last? I have replace my injector pump with a bigger one and replace my lift pump with aftermarket after having trouble with my injector pump .So I upgraded then upgraded my lift pump to help keep thing cool.....Also I have a mint condition 01 Duelly bed I'm trying to sell bc I need a flat bed.....Duelly bed is white factory paint no rust no dents as good as I've seen since 2001
@Rockstar973212 жыл бұрын
'great video. I have a 1995 Dodge Ram 3500 Maxivan that was converted into a 'Roadtrek 190 Popular' RV when it was new. When it was converted, they installed a heavy-duty tie bar in the front and overload leaf springs in the rear. Will the parts that you used in your truck work in my RV?
@AllThingsBoost2 жыл бұрын
Man, I have no idea. You'll have to look and see if they are the same or not.
@danashields54202 жыл бұрын
sorry, but I'm unsure--based on the comments below--if a 2.5 inch coil lift will require larger shocks. Did the AllThingsBoost require shocks?
@AllThingsBoost2 жыл бұрын
You'll need longer shocks or shock extensions like I used
@michaelborges6918 Жыл бұрын
Question.. I have the spacers but the way they sit on the spring worries me, they sit on top of it but the actual spring doesn’t go into the groove. Did you find yours was like this? I have the same exact truck as you. Thanks for your time!
@AllThingsBoost Жыл бұрын
That is very weird. No, my spring sits inside of the groove. Did you order the same spacers I did from the link in the video description? Did you remove the spring insulators and place them ontop of the spacer? The spring should definitely sit inside the groove. I just made a video on installing polyurethane lower control arm bushings, check the videos tab, and in that video I had to take everything out and I have some good views of the spring / spacer / insulator disassembly and assembly, maybe that will help you get a better view of everything. I'd be concerned as well, I hope you are able to figure it out
@michaelborges6918 Жыл бұрын
Thanks for the reply! Yeah I ordered the same exact thing but I feel like they sit on top and not in the groove, maybe the previous owner replaced them at one point, who knows. That video definitely helped! I appreciate your time.
@OmaniCotler Жыл бұрын
@@michaelborges6918 i grinded my spring with a angle grinder just enough for it to fit snug
@LamontBoucherville3 жыл бұрын
Good looking body on that ram
@rudygamboa71712 жыл бұрын
Great video sir, will these spacers be ok with a 5.9 cummins engine? I have a 97 dodge 2500 2wd with a cummins and I want a 3inch lift in the front
@AllThingsBoost2 жыл бұрын
I also have a cummins engine.... so yes? How do you have a 3in lift already without spacers? To my knowledge the 2wd IFS has no other front lift options
@rudygamboa71712 жыл бұрын
@@AllThingsBoost oh ok great, no sir I don't have them yet, I want them so I can lift my 2500 3inches, however when I go to purchase them, Amazon saids there not for my application
@AllThingsBoost2 жыл бұрын
@@rudygamboa7171 Gotcha. Qell, if you've got an identical style suspension to what I have, they work. Best of luck.
@rudygamboa71712 жыл бұрын
@@AllThingsBoost yes sir we have the same front end
@rudygamboa71712 жыл бұрын
@@AllThingsBoost what year is your rig?
@BenKleinCreates10 ай бұрын
I have an extended bed. Wonder if there’s any issues leveling that
@AllThingsBoost10 ай бұрын
What's an extended bed??
@raleighbecket36152 жыл бұрын
Have a 01 2500 2wd stock all around checked the link for the front kit and says it fits then when u scroll down it says it doesn’t fit extended cab models now obviously you have an extended cab does it still work regardless of the fine print? Please and 🙏
@AllThingsBoost2 жыл бұрын
Yes, it still works. I have no idea why they say it doesn't 🤷♂️
@jancellcorsino58013 жыл бұрын
Hey was wondering where is that tailgate from with the RAM stamped in it got the same truck been looking around with no luck. Thanks in advance
@AllThingsBoost3 жыл бұрын
Stock tail gate, I stuck the letters on. Check the playlist, it's in there
@jancellcorsino58013 жыл бұрын
@@AllThingsBoost thanks a ton I saw the vid after I posted the comment watched the whole series nice job on the truck also helped me a lot on my build thanks again !
@Reviewerguy12282 жыл бұрын
Where did you get your truck aligned afterward? The companies that I have called around me locally say they can’t do duallys
@AllThingsBoost2 жыл бұрын
I had to call a bunch of places, and one "Vannoys Tire Inc Tire Pros" near Pensacola FL where I used to live was able to do it.
@Reviewerguy12282 жыл бұрын
@@AllThingsBoost oddly enough a few local places turned me down but pepboys ended up doing it for me $110, 2022
@Parker_CR3 жыл бұрын
Do you’ll think I’ll need the shock extender with a 2.5 inch leveling kit?
@AllThingsBoost3 жыл бұрын
Yes
@lionelpritchert2 жыл бұрын
Or you can get +2” shocks
@zinnmaster91352 жыл бұрын
You ever have any problems with death wobble after the leveling kit install?
@AllThingsBoost2 жыл бұрын
No
@tomburns8909 ай бұрын
How does that 1-1/2” spacer create 3” lift?
@AllThingsBoost9 ай бұрын
Geometry magic of the independent front suspension.
@djshedd772 жыл бұрын
1995 2wd 2500... will these same parts still work?
@bill-nf1wr2 жыл бұрын
How did you get the upper control arm down far enough to start the nut?
@AllThingsBoost2 жыл бұрын
Little below grease.
@americaniron31610 ай бұрын
I know this video is old, if you see this could you link the product you used i cant find one for ext cab it said only single cabs
@AllThingsBoost10 ай бұрын
I don't know why they list them as single cab only, it's the same part. I'm pretty sure mine also said single cab.
@Bubba-cs7sb2 жыл бұрын
So I put a 3inch on mine and have yet to get aligned but my upper hall joint touches my spring mount and everyone ik that has had one said they had to cut it to make it not touch did yours touch?
@AllThingsBoost2 жыл бұрын
It did when in the air, but on the ground I had a bit of clearance and not had an issue
@Jim-zt1hl3 жыл бұрын
How come the kit you put on your truck says not for extended cab?? It seems to work on yours... cause that's what I have and don't want to get the wrong one.
@AllThingsBoost3 жыл бұрын
I have no idea. I keep seeing them and they all say they don't work for extended cab. I said screw it and tried it anyway and it worked fine as you saw in the video. Honestly I'd just ignore it.
@Jim-zt1hl3 жыл бұрын
@@AllThingsBoost Hey man, thanks for the reply! Your truck looks Great!
@bboie82342 жыл бұрын
Hey fellas I was ready to buy the front and back 3" lift kit package with the pro comp shocks from supreme I saw the same warning doesn't fit extended cab ... further investigation what I found it was because the rear lift in the package are only set up for 2 1/2" wide leaf springs... Thx for the video What size tires are you running in the vid... you may have mentioned but I missed it thx again
@angelfr4347 Жыл бұрын
Could you tell me the name of the second lifter I need one for my ram 3500 or the link where I can get it
@AllThingsBoost Жыл бұрын
Check the video description for the parts links. It was from supreme suspension
@bulldograil26913 жыл бұрын
How’s the ride feel my Cummins 2wd spacer level feels horrible
@AllThingsBoost3 жыл бұрын
With those stock extenders it literally feels exactly the same as stock. I've put on about 3k miles towing over the past 2 weeks and they are holding up perfect. No change in ride feel and with the 2in block tows level. Hope that helps
@ixryq83682 жыл бұрын
Hey can I message you somewhere? I added tbt same spring puck and it completely jacked my ball joints and the upper ball joint is hitting the bump stop in the front
@AllThingsBoost2 жыл бұрын
My instagram is @AllThingsBoost I'm not a professional and this is my only install with these parts, but send me a message and we'll see if maybe we can figure something out.
@RM-wt9zh3 жыл бұрын
Did you notice any change on turning radius after the install , I have 2001 2wd 2500 Cummins , i installed front 1-1/2” spacer ( 3” lift ) , I use make a complete U turn on my st, after install its a 2 point u turn , just wondering if anyone have the same problem thanks
@AllThingsBoost3 жыл бұрын
Yeah, I noticed a slight decrease. The drivers side brake caliper bolt will hit the bump stop mount now at full lock. Raising it up seems to have messed with the clearance a bit
@chaseholmvik56662 жыл бұрын
Is it just me but does your ride like hell and i put new shocks on and the shock extenders and it’s still really stiff and boncey
@AllThingsBoost2 жыл бұрын
It has its moments. Significantly smoother with 10k lbs on the back. It's a 3500 from 2001, they are a stiff ride, especially the rear end.
@GerardoSolis-f1g7 ай бұрын
Where can I buy front shock absorber extenders?
@stevehardeman72092 жыл бұрын
What differential do you have. I've got a 97 2500 2wd with a Dana 80 and wonder if that kit would work for me.
@AllThingsBoost2 жыл бұрын
Dana 80, same as yours
@timoteomartinez81805 ай бұрын
Wear I can found the shock absorbers extension at ?
@AllThingsBoost5 ай бұрын
I'm not sure. Just google 2in shock extensions and pick one, they are all pretty much the same
@bustamantealdo Жыл бұрын
Where they able to align to where it don’t have positive caster?
@AllThingsBoost Жыл бұрын
Yes
@jettglover1187 Жыл бұрын
was that a 3 inch spring?
@AllThingsBoost Жыл бұрын
Stock springs to my knowledge
@quinalex983 жыл бұрын
Do you think cargomaxx HD leveling coils will work just fine? 2wd
@AllThingsBoost3 жыл бұрын
I have no idea
@oksanatuszynski80422 жыл бұрын
Hi just took my 3500 RWD to a shop to get this done and they telling me nothing fits and they are not made for this truck. So they can’t fit 35s and said there is no leveling kit in existence that made for this truck
@AllThingsBoost2 жыл бұрын
Do it yourself. Shops suck. Obviously it exists, I did it.
@oksanatuszynski80422 жыл бұрын
And you don’t think it’s bc my is 03. And yes at this point that’s the only way
@AllThingsBoost2 жыл бұрын
@@oksanatuszynski8042 you did not mention it was an 03. I do not know
@richardhunley24902 жыл бұрын
Im looking for new springs as well
@hidros14612 жыл бұрын
Did u ever do the body lift?
@AllThingsBoost2 жыл бұрын
No
@Motoman714. Жыл бұрын
Is there any lifts for 01 2500 that are more than 3”
@AllThingsBoost Жыл бұрын
If you find any let me know as well
@Mikhailkalashnikov47743 жыл бұрын
On Amazon it’s says not use for extended cabs? Does it not matter or what
@AllThingsBoost3 жыл бұрын
Been on the truck for over 10k miles, no issues. Not sure why it says that but it works fine
@dskeetgt2 жыл бұрын
I've got a 2010 4th gen 2wd dually. Does anyone make a lift that will bring the truck up to where a 4th gen 4wd sits?
@andrewkerlin50022 жыл бұрын
Did you get noise without insulators?
@AllThingsBoost2 жыл бұрын
Nope
@claysumm53983 жыл бұрын
would all of this work on a 2500 as well?
@AllThingsBoost3 жыл бұрын
It will yes. If it's a 2wd independent front suspension like mine, it should work the exact same.
@shmilyforever71952 жыл бұрын
Where can I order the level kit? I have a 1999 dually 3500 2wd
@AllThingsBoost2 жыл бұрын
All the parts I used are in the description 👍
@nicholasdube49952 жыл бұрын
Do you think this could work on a 2500 with the dana 70 diff?
@AllThingsBoost2 жыл бұрын
Honestly couldn't tell you. If the suspension setup looks the same as mine does it should work the same. The dana 70 might even fit the blocks with no drilling the hole bigger.
@nicholasdube49952 жыл бұрын
@@AllThingsBoost Well I guess there's only one way to find out!! thank you for your answer
@caytonflooringllc84693 жыл бұрын
03 ram 3500 When I did my ball joints I installed Maxtrac lift spindles . Next thing I'm doing is this for a total 6.5 in lift.
@AllThingsBoost3 жыл бұрын
Nice man, I was looking for a while for a 2nd gen 2ed lift spindle but I cant fine one. I think the 1500s have one, but not sure if they are comparable with a 3500
@brockstock63072 жыл бұрын
What length of u bolts did you use?
@AllThingsBoost2 жыл бұрын
12" for the U bolts
@nabucodonosorramalha38122 жыл бұрын
Somebody have the right and complete kit number for front and Rear side for this model. I have the same model of Dodge ram and I want to replace all suspension and lift 3 inches. Please help me I'm from Panamá.
@AllThingsBoost2 жыл бұрын
Rock auto for suspension components, try and stick with Moog brand. The parts used in this video are in the video description.
@nabucodonosorramalha38122 жыл бұрын
@@AllThingsBoost ok brother thanks a lot. Bro can You give me the part number of the Best shock for this model of Dodge ram ❓or something recomended please.
@AllThingsBoost2 жыл бұрын
@@nabucodonosorramalha3812 most will recommend bilstein, not sure on part number. I am running monroe right now but am not a huge fan of them.
@JacobManning-ec2bw2 ай бұрын
i cant find shocks
@averagesouthtexan52693 жыл бұрын
That was very risky doing that next to your mustang
@AllThingsBoost3 жыл бұрын
Lol, nah. Honestly nothing risky about it on jack stands 👍
@averagesouthtexan52693 жыл бұрын
@@AllThingsBoost I was talking about the coils, mine shot 5ft to the side when I messed up
@AllThingsBoost3 жыл бұрын
@@averagesouthtexan5269 holy cow, glad you're all right. Definitely sketchy man.
@rwizzard73 жыл бұрын
shock extender and lift block links are the same...
@AllThingsBoost3 жыл бұрын
Have you tried looking up a shock extender by using the words "life block link"? Nothing came up for me... just saying. Maybe that's a local term
@rcmc12563 жыл бұрын
That other spacer is wayyyyyy to much
@danieldavalos32543 жыл бұрын
Do you have the part number for the aftermarket shock absorbers?
@AllThingsBoost3 жыл бұрын
I assume you're referring to extended length ones? No I do not. I got sick of trying to hunt them down and used the extenders with stock length shocks
@danieldavalos32543 жыл бұрын
@@AllThingsBoost I couldn't find the shock extenders in the link so I was just going to go with a different shock.
@AllThingsBoost3 жыл бұрын
Oh yeah, someone else mentioned that the link was gone too. Lemme update that real quick. In the mean time, this one works www.ebay.com/itm/2-4-Lift-Front-Shock-Extender-for-1994-2002-Dodge-Ram-2500-3500-2WD-4WD-/163041659522?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@danieldavalos32543 жыл бұрын
@@AllThingsBoost Great thanks, I appreciate all your responses and content.
@WOWBOYMACK3 жыл бұрын
💪🏾💪🏾💪🏾
@juanderful693 жыл бұрын
Please do a body lift video in the future
@AllThingsBoost3 жыл бұрын
We'll see, I'm not sure if I want to go that route yet, but if I do there will be a video of it
@tonygarcia8998 Жыл бұрын
@@AllThingsBoostsend me a link where I can find this body lift I been looking for the past couple hours
@Reviewerguy12283 жыл бұрын
53 block?
@AllThingsBoost3 жыл бұрын
Havent found a 53 yet, so I don't think so
@SteveEngland-w3m Жыл бұрын
When I click on the link for the spacers it only gives me the option for a 2” or 2 1/2”. The kit on Supreme Suspension has it listed as a 3” but it’s out of stock. Is your link for the same one you installed?