3 MISTAKES We Make Using Pipe Wrenches & Channel Locks

We've all used channel locks and probably pipe wrenches too, but too many of us are making simple mistakes! #diy #plumbing #oops
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• 6 Plumbing Mistakes DIYers Make with Teflon Tape: • 6 Plumbing Mistakes DI...
• 10 Common Mistakes DIYers Make In Circuit Breaker Boxes: • 10 Common Mistakes DIY...
• 6 MISTAKES DIYers Make When Wiring Outlets: • 6 MISTAKES DIYers Make...
📦 PRODUCTS IN THIS VIDEO AND MY FAVORITE PLUMBING TOOLS 📦
You can use the product button in the video or check out these links below.
• Great priced pipe wrench set: geni.us/Xb5iGDJ
• The ORIGINAL 10" Ridgid Pipe Wrench: geni.us/2kwnxo0
• The ORIGINAL 14" Ridgid Pipe Wrench: geni.us/ARIRmgF
• Great priced Channel Lock set: geni.us/przuXP
• Real Deal Holyfield Channellock Set: geni.us/hjTF3
• Blue Monster Teflon Tape: geni.us/mNuSxvi
• Zip-It Drain Clog Removers (I love these things!): geni.us/8vfBh
Any link here may be an affiliate link, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q

[@btd2516]

Very informative, but the same applies to the Crescent wrench, (adjustable wrench) that you used in the beginning. You put the force against the movable jaw in the wrong direction, and you should be pulling towards the movable jaw.

[@LRN2DIY]

Every time I post a video I learn something new from viewers like you. I must have completely missed that and didn't even think about it on the adjustable wrench, so thank you!

[@smokeyninja9920]

I came to post the same thing. In the demonstrated use, forces push outward on the moving jaw creating a risk for slipping off &/or rounding the fastener, when used the correct way that jaw is pushed downward, into the handle of the tool, locking it firmly in place.

[@spamlessaccount]

Came to say the same. I always remember it (for all these tools) as pushing/pulling TOWARD the open end of the mouth.

[@kenbrown2808]

that's incorrect. when you turn the nut with an adjustable wrench, the force should be applied as close to the base of the moveable jaw as possible, to minimize leverage against the slide mechanism.

[@smokeyninja9920]

@@kenbrown2808 youtu[dot]be/I9BAPAfVSyE?feature=shared&t=119 youtu[dot]be/qsHomDTTRXo?feature=shared youtu[dot]be/r1yGfwyFsh4?feature=shared each video discusses the proper way to use an adjustable wrench, and the forces at play for why it's the correct way.

[@seantivenan9593]

looking at the comments it's actually 5 mistakes "we" make 😂😂 it's refreshing to see that when someone points out something that you could have improved on you're able to thank them, you deserve praise for your humility ! so many you tubers lack that !!

[@JCWren]

I would argue that the slip joint pliers should have been opened one more slot :) They should be adjusted so that the handles are as close to parallel as possible.

[@LRN2DIY]

Excellent point! I always learn from the comments section so thanks for sharing. I'll have to pay closer attention to that.

[@kellybell9235]

@@LRN2DIY you are correct the handles were to far apart

[@kellybell9235]

@@poa2.0surface77 if you are using knipex cobra pliers it is impossible to get pinched between handles. Maybe its time for you to upgrade to a quality plier.

[@mrhalfstep]

Our Maintenance crew once got some instruction from a safety engineer about the safe use of handtools. We were told that, when using tongue and groove piers, we should always adjust the handles such that we have the minimal spread between them that still gets a grip on the fastener. To use them with the grips spread too far apart, as you did when demonstrating them, can cause damage to the tendons and ligaments in the palm. He also recommended that, when forced to PUSH on an open end wrench, pipe wrench, or adjustable Cresent-style wrench, it is best to do it with an open palm. If the wrench slips or the fastener suddenly breaks free you are less likely to bust your knuckles if you aren't wrapping your fingers around the wrench's handle. It is also preferred to PULL on a wrench when possible because the bicep will be doing the work and your whole body won't go flying backwards if the wrench slips, for instance. Shoving on a wrench sort of requires leaning your whole body weight into it and you can tumble forward if the wrench slips. These aren't hard and fast "rules" for using the tools, just the things that we were asked to keep in mind when we worked.

[@tombrickhouse-growthmatrix6201]

As I watched, I was thinking, "This is nothing I don't already know"' until you got to the part about the 3 points of contact and pipe wrench release trick. Never too old to learn.

[@cynthiacarlisle8534]

Thank you so much for this video - I couldn’t remove the hoses from my washing machine - watched your video and - what a difference!- easily loosened just like you said! The 3 point contact was especially helpful!!!

[@Mark_R]

Haha got me Nils! It was driving me nuts watching you loosen and tighten the pipe until you showed #3 😂

[@berthongo8531]

I realize that the nut you were loosening was only hand-tight. Been there. Done that. Being picky but I was taught that the moveable jaw needs to be pointed in the direction of rotation. This puts the force against the fixed jaw while the adjustable jaw keeps the wrench on the flats. Using it the other way puts all the force on the the moveable jaw and may damage it. I was also taught to only use an adjustable wrench when a proper sized wrench was not available. Adjustables have a tendency to slip off and damage the flats as well as the users knuckles. Many years ago, I was on my first job and the old timer I was with gave me an adjustable and told me to remove a filter from it's canister. I looked at the wrenches sitting there and her told me to use the adjustable. Later, he told me that he did that to see if I used the adjustable correctly. I had and he had passed that along to my new boss.

[@kenbrown2808]

you were taught incorrectly. the force will always be split between the fixed and movable jaw. just like with a pipe wrench, you want the movable jaw to be pulling on the nut with the base, rather than pushing on the nut with the tip.an adjustable wrench will always be more likely to roll off if the force is toward the tip of the movable jaw.

[@purdyboi8078]

You WERE taught correctly! I think @kenbrown just misunderstood you, so disregard his comment. Everyone on here commented about how he was using them the wrong way, so don't worry...you were taught the right way

[@kenbrown2808]

@@purdyboi8078 multiple people being wrong doesn't make them right. with a Crescent style wrench, it works best when it is oriented so the force is against the BASE of the movable jaw, instead of against the TIP. if your wrench is a cheap knockoff, applying the pressure at the tip of the jaw will cause it to roll off the nut.

[@tedcox3586]

Gotta disagree on the three points of contact on the pipe wrench. In a perfect world maybe, but if you are working in a hole, or tight space having the pipe all the way back in the throat could cause slippage. Also can lovk the wrench on to the pipe making it impossible to ratchet and remove the wrench. When working with metal pipes, alot of jobs involve old rusted, froze up pipes and the last concern is crushing it. Just getting a good grip, half way on the jaws and so the jaws are parallel is the way to go. And properly sized wrench as well. Bonus tip, they make offset pipe wrenches and pipe wrenches oriented like a Cresent (adjustable) wrench too that are so much better to work with in most cases...

[@Beehashe]

The three point contact is important, it prevents crushing the pipe.

[@ranger178]

I see most plumbers on you tube constantly using Channellock's backwards for some reason my dad would yell at us if we used it backwards LOL

[@jeffostroff]

Glad to see you added the section about the 3 point contact. Because that has always been my rule of thumb, though 3 points form a square.

[@LRN2DIY]

Thanks, Jeff. Helps to not crush the pipe and to prevent slippage too. Hope you're doing well, brother!

[@paulsmith9341]

I have 5 pipe wrenches. None of them purchased. Two are antique monsters to me. A 20" and a 24". Both received as part payment for jobs i did. Two are Rigid aluminum that i found in a cardboard box at the landfill, brand new. The 5th is an 60 year old Japanese 6 inch that comes in very handy. I inherited that one from my Dad.😊

[@LRN2DIY]

That's awesome. I think I have three and I only purchased one. Two are from my late father-in-law since those things will outlive us all!

[@qapla]

Good information about these two tools. I see many people use the slip joint pliers backwards and not have 3 points of contact with both of these tools. BTW - It should be noted that, while using the adjustable wrench on the fitting, you used them backwards ... another common mistake many people make. They should also be used in the same direction of handle pull to jaws as the pipe wrench to keep the force of use from opening the jaws.

[@JP_TaVeryMuch]

Thank you Nils. I _knew_ there was a reason for the wobble but as I'd inherited from Grandpa, I just thought that it was relaxing into its old age. Now I'll have to dig it out and go round the house looking for excuses to use it! Many thanks from over yonder in London.

[@MyUnquenchableThirst]

That's funny cause yonder is very common in the Southern American dialect

[@julietphillips1991]

Thanks for this. These tools are so different than woodworking tools but if you love tools, it comes in handy to know the basics on how to properly use them in the many home diy maintenance situations.

[@buttonman1831]

I work these these tools almost daily with a large crew of guys and it shocks me how many people don't use channel locks correctly. Even an adjustable wrench is only meant to turn one direction.

[@JamesSmith-gk8sz]

Might be worth adding the “strap wrench” to this list as well. Literally an adjustable rubber lasso that tightens through a handle and had ridges to lock onto a surface you don’t want to mar or crush. Only caveat is how strong you are. For example it can be used to tighten a bathtub faucet perfectly and doesn’t damage the finish in the spout whatsoever.

[@LRN2DIY]

Great point, James. Those are pretty awesome in a lot of cases.

[@jnb8918]

Thank you for the video. I knew about the first and second mistake, and about the hidden mistake you made at 1:16 (and by the way, even standard non adjustable wrenches have a good and bad direction of rotation; the angle in the wrench must be "wrapping" when applying force, just as with adjustable wrenches) But I never knew about the 3 points contacts in pipe wrench or channel lock. Thank you so much for this explanation 🙂😉

[@hansangb]

Hmm, @5:15 all these years, I never pressed down to release the jaws. Go figure.

[@riderboulevard5558]

Thanks LRN2DIY. I never had anyone to teach me any of this growing up! And I learned today from you!

[@janecote]

Very helpful. Thank you very much.

[@ulhpilot7757]

Have been born and raised in the town where your pipe wrench was made, I learned these lessons at an early age.

[@GoodlyEarth]

Another great video Nils. I wish I had known these methods two decades ago, would have saved me a lot of time and money (and extra trips to the hardware store).

[@LRN2DIY]

Thanks, Mitch! We need some sort of a "how to use tools" class in high school, right?

[@jonathan3982]

Very informative video.

[@mr.boniato6402]

Great info, thanks.

[@MyUnquenchableThirst]

3 points of contact is so far down the things of importance. Great video about the other 2!

[@martinschulz9381]

Good video. We all hate adjustable wrenches , but we all have therm and we all use them when we know we shouldn't. I worked in a mill once where they actually took them away and outlawed them.. (Too many rounded nuts) I didn't know about using the pivot slop in the pipe wrench. Been using them all my life.

[@shawnevans827]

Great informative video as always Nills!

[@LRN2DIY]

Thanks, Shawn!

[@steveolive9991]

Channellock makes tongue/groove (parallel) pliers with a smooth jaw (no teeth) to prevent leaving teeth marks on metal fittings > Channellock 415 10-Inch Smooth Jaw Tongue.

[@lawrencerayborn6258]

Good job on the video. The adjustable wrench you used is designed with directional use also. You used the wrench backwards when you loosened the nut. You have maximum turning and force applied when turning.

[@theElderberryFarmer]

Another common name for the pipe wrench is a Stillson Wrench -- also a brand name. Take care and God Bless.

[@drwhoeric]

Another important reason for the three points of contact is to reduce the risk of distorting the shape or roundness of the pipe. One thing I am not clear on is if a crescent wrench should only be used in one direction. I see you used it in the opposite direction I have been educated to use it for.

[@johnbauman4005]

You are correct. He was wrong.

[@markp6062]

Great info! Never really thought about three points of contact.

[@butchcarter6161]

Thx! Immediately helped

[@Mark-fx9jh]

Very helpful

[@no_handle_required]

Simple and clear. I actually learned something too, bonus.

[@Echowhiskeyone]

For non-marring, you can also use a smooth jaw pipe wrench. Great for very tight finish fittings.

[@christopherhowlett1096]

That's called a monkey wrench and yes they are nice for not marring fixtures.

[@Derpy1969]

I love how in the first example of using an adjustable wrench to loosen a nut, he uses it in the wrong direction.

[@What1zTyme]

Good information, well presented. Am sure you've been told many times, you are a doppelgänger for Damien Lewis that portrayed Major Richard Winters in "Band of Brothers" (HBO, 2001)

[@MsKinnara]

@LRN2DIY Your first mistake was also using the adjustable Crescent BACKWARDS at 1:13 in video. If you use the crescent wrench the way you did you put stress on the weakest part of the tool the adjustable section instead of the stronger part the solid part made directly to the handle.

[@NickatLateNite]

As a retired, professional remodeler, my master plumber (of 40 years) called the adjustable wrench "parrot-nose pliers"😄

[@YouTubeSwick]

Good job, 👍👍

[@Bobcat1950]

Even the crescent wrench works the same way.

[@unfnbelievable3609]

As a 38 year veteran of the fire sprinkler trade (We use wrenches!) I wanted to critique your show but... I got bored. So I'll just comment on your shirt. MY motto was always: "Measure twice, cut three times!" 😎

[@ProctorSilex]

A plumber friend said that slip joint pliers have a locking feature that he never demonstrated. The only time they ever locked for me was when the cheap ones popped out of their own groove under pressure.

[@LarryDickman1]

You forgot the section where the pipe wrench can be used as a hammer.🤪🤪🤪 People use adjustable wrenches often called Crescent® wrench backwards.

[@pondacres]

Thx that was informative

[@leealtmansr.3811]

I prefer to use my Knipex. Leave my Channellocks for wire cutting. As others have said, Channellock is a brand name that makes lots of different tools. Also, again, as others have said, use smooth jaw pump pliers for finished material. Otherwise, this is a very informative video. 👍

[@christopherhowlett1096]

Not technically true they are called tongue and groove pliers too. It's kind of like crescent with crescent wrenches aka adjustable wrenches or adjustable spanners. They get called this because channel lock invented the tongue groove pliers and I know crescent invented the adjustable wrench. I will say this the guy who invented tongue and groove pliers(Howard Manning) actually did patent the name channellock for them so it isn't technically incorrect to call them channellock pliers because that's what the patent says. It's like when people argue about silencers and suppressors saying you're calling the wrong thing if you call him a silencer which is incorrect because the patent for the design was actually called a silencer but it is appropriate to call them suppressors as well because that's what they actually do.

[@RGWv]

Do one on Vice-grips!

[@ronh5623]

Most adjustable wrenches also have a direction for gripping.

[@willmallory9085]

Thanks.

[@Colorado_Native]

No offense, but at 1:13 aren't using the adjustable wrench upside down?

[@RYwoodview]

Things I don't, and need, to know, including the additional comments below. Thanks, Nils & all!

[@monteglover4133]

The Chanellock #410 is made to grab onto pipe, round, rounded, … items. I’m a semiretired HVAC&R tech

[@dennisdelengowski9573]

Let's call this one for beginners only!

[@rettif9]

You put the adjustable wrench on the nut backwards. When using it the way you did, If you have to use a lot of force it tends to push the jaws apart and increases the chance of rounding off the nut. The handle is at an angle to the jaws for a reason. Wrong about the pipe wrench as well. You want two points of contact to take advantage of the leverage to improve the grip. Take the jaw out of the wrench and you will find a little spring inside the wrench. Put your thinking cap on and tell us why they did that. For a quick lesson in leverage try to use the channel locks backwards.

[@greense65]

Nice t-shirt.

[@johnyates9346]

Old timers called pipe wrenches “Stilsons” because they were manufactured by a company by that name. Stilton was printed on the handle in large letters.

[@spamlessaccount]

1:15 I would never grip the compression fitting to hold that in place. Put another wrench on the body of the valve.

[@candudaddy]

3 point contact, well, maybe. Gettin the jaws on straight is more important. Because you were working in a vice, there was no need to mention the most important rule: Pipe wrench’s and Channelocks are best used in pairs. One wrench to hold the rest of the piping still and the other to tighten or loosen the nipple or fitting being worked.

[@kellybell9235]

Great tip on gow to properly orient pipe wrenches and slip joint pliers, then you used an adjustable wrench backwards. The same thing applies to them as well. The way you used itt applies all the force on the weaker adjustable jaw rather than the stronger fixed jaw.

[@kenbrown2808]

you are incorrect. both directions will apply force to the adjustable jaw, but the direction he turned it applies the force to the strong base of the jaw, where the adjusting mechanism can withstand it best, rather than the tip where leverage can cause it to flex. set a Crescent (tm) wrench on top of a pipe wrench with the movable jaw in the same orientation. that might illustrate the point. (the handles will be offset by 90 degrees)

[@kellybell9235]

@@kenbrown2808 with a crescent wrench in your hand like you are shaking hands with it the fixed jaw should be on top and the adjustable jaw on the bottom same as water pump pliers or a pipe wrench and you push the handle down

[@kenbrown2808]

@@kellybell9235 so you are saying he should have rotated the wrench 120 degrees around the pipe but kept the jaws in the same orientation? that is acceptable, but really pulling or pushing on the handle only affects the angle of approach to the nut. it is the orientation of the jaws that is important, and he had the jaws oriented correctly.

[@kellybell9235]

@@kenbrown2808 what I’m saying is he should have flipped the adjustable wrench over to turn the nut the direction he was turning it

[@captainchaos3053]

Guy giving advice on how to use tools demonstrates using an adjustable spanner backwards within the first section of the video. The springs will let a pipe wrench release to rotate backwards it doesn't get any more self explanatory than that. Gravity is a horrible assistant when plumbing. 3 points of contact is also wrong. Also the pump pliers needed to be open one more notch.

[@buyamerican3191]

So many things to point out here. Mostly that if people don't know the proper way to use a wrench then they probably shouldn't be attempting home repairs. Diy people need to enroll in an apprenticeship program not run to the nearest home center to gain advice from people that don't know their names without looking at their name tags!

[@usaearthling]

I have channels locks that have no teeth. In fact, they are completely smooth. What would those be used for? Thanks for all this info.

[@purdyboi8078]

Same application...except if you don't want to leave any marring on the finish of whatever you're using it on. They're called smooth-jawed water pump pliers

[@reapermontanta3280]

🔥🔥🔥

[@randyblackburn9765]

Just as I was about to tell you the pipe wrench wasn’t opened enough….. One thing important is that quality like rigid brand is best ,also years ago when we ran galvanized we could,knock out the pin and put a new lower jaw on the wrench.

[@pauljewel6988]

1:17 was this the way the adjustable wrench should be used, shouldn't the short/small head be pointing in the direction of the turn, I'm just asking?

[@purdyboi8078]

Yes!

[@darrenporsch]

Yeah he's an adjustable wrench The thing that rounds off more nuts than anything that's a good second choice to the pipe wrench

[@davebrunson125]

You need to go into how to properly hold the wrenches.

[@horsepowerandtalk1033]

It's almost impossible to use a pipe wrench in the wrong direction. An adjustable can brake if used in the wrong direction or strip the nut.

[@elliotbrittain2064]

Why does it seem to me that everyone in these comments has never used a wrench? A simple wrench is angled. In a tight space with few degrees of rotation available the way the wrench faces matters because it will sit differently on the work. Also, adjustable wrenches shouldn't be adjustable by the work itself. Yours may be busted. -EDCs 4'' adjustable wrench and knipex raptor pliers.. Just go use one for yourself. I'm wrong 😂

[@richardl6751]

At 1:15 The adjustable wrench should be on the other way.

[@kenbrown2808]

nope. put the force at the base of the movable jaw, not the tip, just like with the pipe wrench.

[@richardl6751]

@@kenbrown2808 Which he did not do. I can't post the link to show you.

[@purdyboi8078]

@@kenbrown2808 Nope, you're wrong. Try again ken.

[@kenbrown2808]

@@purdyboi8078 okay. nope. put the force at the BASE of the movable jaw, not the TIP, so the jaw has more leverage to hold its shape, just like with the pipe wrench. just like anything else that you want to avoid bending or breaking. put the force at the SHORT end of the lever, instead of the LONG end.

[@phillipcoiner4232]

Wrong on slip joint pliers. Your fingers are too far apart making your grip too weak. Move to the next slot so your fingers are closer together amd you can put more pressure on the jaws. Jaw pressure is more important than throat contact.

[@waytospergtherebro]

It's important to always give your wrench 1/4 turn backwards in order to engage the super secret locking mode those fat cats in Washington don't want you to know about.

[@davefuelling7955]

I came to be informed and the very first thing you did was use the adjustable wrench the wrong way, how can I trust anything else?

[@binagarten4667]

Or a vacum cleaner a Hoover

[@forgottenpeopleplacesandol4258]

Anybody who can't figure this out by themselves should not own wrenches.

[@readplanet23]

👍🏼

[@topcatandgang]

putting a boxed end wrench on a fitting to hold the valve from turning is not the right approach, using an open end or adjustable wrench on the back side of the valve is the right way if you notice the valve is shaped to hold to hold a wrench. if that valve was on really tight, you could break the smaller fitting off. he does have some info to follow but some not so good.

[@VeinySausage]

Wish I had a father that taught me the basics🤣 KZbin is my father

[@570ttz]

Everything thing was correct except the crescent wrench, you had it backwards 😢

[@gregb8824]

1:14 ...really? In a video intended to show the correct direction to use a tool you turn the adjustable wrench the wrong direction. FAIL

[@scottification4it]

The piece making contact with the back of the hook jaw is actually incorrect per Ridgid tool company. All else is legit though.

[@chrismoody1342]

I’ll I got to say is Knipex.

[@oneisnone7350]

And he used the Crescent wrench the wrong way. Lol

[@PANZERFAUST90]

There's no such thing as channellocks. They're called adjustable pliers, and besides the name is called Channellock.

[@jimkoss3318]

Yes, Channellock is a brand name, not a type.

[@rondavis415]

These” and “those” are for more than one. The word one means only one. So, it is completely wrong to say these ones. You should not say “I like these ones.” Or “I like those ones.” It is okay to say, “I like this one.” and “I like the red ones.” Use an adjective to describe the object.💥

[@markbrajkovich311]

Nobody needs to show anybody if you do it backwards, you won’t have any grip. If you do it forward you’ll have a grip it’s self-explanatory and if someone isn’t smart enough to figure that out, you’re not gonna be able to explain it to him.

[@rotarycomptech]

This is just like a kindergarten class

[@waynekarjala2032]

That is not a slip joint plier.

[@codythompson9035]

I’ve literally never seen anyone ever use a pipe wrench backwards… at least outside of these videos inventing issues that don’t occur. lol maybe someone…

[@MikeNovelli]

Locking Pliers. Channel Lock is a brand name.

[@diplication]

I’m sorry, as a master plumber with 52 years of experience, 3-points of contact is ridiculous. This will insure more slippage. You want the pipe in the back of the jaws, but not touching the back. It’s about the geometry that force is applied with the jaws of the wrench, not 3-points of contact. Just think about it, if you needed that extra point of contact, manufacturers would have given you a dedicated flat or toothed surface for this contact. Also throw away your Channel Lock or other grooved pliers and buy yourself a good set of “water pump” pliers. They are easier to adjust, and stand up to water and mud much better

[@MarkFeltonSwamphare]

You are correct in your assertion but the word you wanted was ‘ensure’, not ‘insure’…

[@dogglebird4430]

For my fellow Brits - we don't say "adjustable wrench" - we say "adjustable spanner".

[@LRN2DIY]

Good callout on that. Always interesting to see what words are completely different in our two countries.

[@twistedhillbilly6157]

Tip 1.. Do NOT EVER use the outlet of a valve for leverage. It is the thinnest and weakest part. The body of the valve is made to accept a standard wrench so people don't breaks it like you just advised . How's about getting some actual wrenches before giving such worthless and dangerous advice??!!??!!. Tip 2. A pipe wrench will only work one way which makes it impossible to make a "mistake" .. Was Tip 3 just a list the names commonly used for Water-Pump pliers?? SO, there was only 1 tip and if followed, will result in a broken valve.... This is a little embarrassing...

[@m.g.540]

The municipality contracted with a non union plumbing shop to change the meters in homes and i had the pleasure of watching the "plumber" that came to my house completely chew up the old meter, then promptly chew up the new meter upon installation, the "plumber" as most scab shops had never completed a full certified apprenticeship, never been taught how to use correctly his cast iron Harbor freight pipe wrenches, but hey! they were the low bidder.😂🤣

[@joezaloga]

FYI stopped watching at1:22 you're using the adjustable wrench backward

[@retselyarrh3895]

Dude, I couldn’t watch your video because how can you teach somebody when you don’t know!!! You grabbed the adjustable wrench and use the wrong!!!! Better luck next time!!! 😂😂😂😂

[@georgecavanaugh8757]

You may want to get a full education before you start teaching the “rights” and “wrongs” of using tools. There should always be 3 points of contact if you’re using the wrench “correctly”.