3” MotoFab Leveling kit Install

Today we beat our knuckles to death installing the MotoFab 3 inch leveling kit on my 2017 Silverado LTZ.

[@josemedeiros7331]

Now you need some wheels and tires! 👍

[@DJ-mv1en]

Ty for making this video been dying to see this setup it's nowhere on KZbin your the first probably of few meaning like on two fingers lol

[@6lives526]

100+ views in 24 hours KEEP GOING BROTHER 🙏

[@joeward854]

I done a 2.5” blocks on the bottom of the strut and don’t care for the ride. Are there a difference from top or bottom of the strut?

[@gaelmorales2211]

Can you measure the rear as well and let me know the difference from the 39 1/2? I’d like to see how much of a difference you got to see the lean I’m interested in the same kit

[@Ruben-c6q]

I installed 3" front and 2" rear, and it looks so much better! Btw do you have to change the upper control arm ? I did not ! Would you recommend? Or you just do it just because? And how about the sway bar link??

[@kev_lsn7042]

Don’t have to use new control arms but it’s strongly encourage, due the angle the ball joint is at after the lift. Also, I think I reused my factory sway bar links. They were fine.

[@adrielitodad.214]

Nice work , btw where did you get that wrench ?

[@kev_lsn7042]

Thanks, and which wrench?

[@adrielitodad.214]

@@kev_lsn7042 breaker bar

[@kev_lsn7042]

I believe O’Reillys

[@davidrpayton]

Use a pry bar as you are hammering the side

[@davidrpayton]

Also, bigger hammer

[@davidrpayton]

Definitely put 2 inch blocks in the back

[@fernandogodina505]

Do you have to drop the front differential

[@kev_lsn7042]

Absolutely not

[@DJ-mv1en]

Still nice tho

[@Dingnang7409]

You have no rear blocks ?

[@kev_lsn7042]

In this video, yes

[@AdridlFavsla-ru6ek]

Where did you order that kit

[@kev_lsn7042]

motofablifts.com/i-30558234-07-19-chevy-gmc-silverado-sierra-1500-3-front-leveling-lift-kit.html?ref=category:1390599

[@Ttow49]

Why does nobody show turning the strut 180 degrees lol

[@kev_lsn7042]

@@Ttow49 because you just turn it 180 degrees…

[@Ttow49]

@kev_lsn7042 I'm trying to figure out if I have to put it in a vice or not to get it to rotate because I just moved and my vice is not set up yet to a bench

[@kev_lsn7042]

@@Ttow49 yeah no you don’t need to rotate the bracket at the bottom of your strut with a vice. The way you get it in is by lowering your lower control arm a great deal, after just turning your strut. There was no off screen manipulation of the strut to make it go in.

[@Ttow49]

@kev_lsn7042 thank you

[@DJ-mv1en]

Lol it's kinda bad yeah put the blocks back

[@flatbrokeriverboyz3326]

Oh boy! That’s Bad…..😮😮😮😮😮😂

[@joeward854]

I done a 2.5” blocks on the bottom of the strut and don’t care for the ride. Are there a difference from top or bottom of the strut?

[@kev_lsn7042]

I can’t speak for the bottom spacers, but the top spacers have been pretty good considering the price.