3 Reasons You Should Get a Spyderco PM2!

[@doodysdaggers]

Are you on the fence about the Spyderco Paramilitary 2? In this video I'm going to convince you that it's one of the BEST knives out there! I really think you should pick yourself up a PM2, and here are my arguments why. Spyderco PM2: amzn.to/3U013jP My Email: [e-mail] MY MOST USED AND RECOMMENDED GEAR: As an Amazon Associate, I earn from qualifying purchases. Spyderco Manix 2: amzn.to/3A5Xwss Rough Ryder Work Knife: amzn.to/3A5DY7x Ontario RAT 2: amzn.to/3HQZQWk Leatherman Rebar: amzn.to/3bueYgd Olight i3T Eos: amzn.to/3Nmjzyf Fisher Space Pen: amzn.to/3ynuXWu MY MOST RECOMMENDED BUDGET KNIVES: Civivi Praxis: amzn.to/3vePJFH CRKT Pilar 3: amzn.to/3zxqwst Kubey KU331: amzn.to/3cKAhed Spyderco Tenacious: amzn.to/3J3vWi9 Rough Ryder Work Knife: amzn.to/3A5DY7x Land 810: amzn.to/3J6Evcb CJRB Crag: amzn.to/3cFfpVs Join my Patreon for exclusive content: www.patreon.com/doodysdaggers My Patreon tiers are subject to change as the channel grows. But there will always be giveaways for every tier! I very much appreciate your support! Let's grow Doody's Daggers into a big happy family!

[@outdoorssmith5454]

Don’t forget a Lynch clip

[@0Wheezy]

The compression lock is not like a backwards liner lock. The compression lock actually has a spot milled into the blade that it interacts with, unlike a liner lock that just springs into the way of the blade and you move it out of the way to close. Compression is stronger than your typical liner lock.

[@doejon9424]

Ha ! This is absolutely a knife everyone should own (Paramilitary 2 *or* Para3, depending on hand size). I can still remember the time that these were *So Hard* to obtain because they sold out quickly & Spyderco didn't have their factory outlet expanded yet. They were like a Hinderer or Sebenza. Always out of stock. And this was just the standard black or digital camo s30v version. Now they are readily available, which is great. I still have a small stash of 3 or 4 new in box O.G s30v Paramilitary 2's from them. Never had any issue with my very first one.. after years & years of use. It's a knife that will last over a decade. My blade has shrunk a bit from sharpening & the DLC is worn nicely.. but it still performs flawlessly with s30v. Great knife for sure !! I always recommend these & some pivot lube if someone has a $150-200 budget (spyderco used Militec-1 lubricant on it's U.S.A manufactured knives in the mid 00's.. so they probably still do. Great lubricant. Especially for a PM2.)

[@doodysdaggers]

Very interesting! I didn’t know they were so rare when they first came out. I agree, as time goes on and I handle more and more different knives, I still think the PM2 is one of the best designs ever. Looks wise it’s not for everyone, but you can’t deny that it’s just built for work. Amazing ergos, perfect blade shape. Thanks for the comment and for watching! 🤠

[@doejon9424]

@@doodysdaggers Yeah man. In the mid 00's.. they were constantly Out of Stock. It was crazy. Very frustrating. I ended up buying x2 digital & x2 black (one satin and one DLC of each model) when I could because they literally couldn't keep up with demand. Now I have many different versions but I always carry one variation. I'm sure you know.. never had a failure on you. Always ready to work. Stiff lockup.

by far the most classy PM2 I have ever seen. Beautiful mod.

[@allosaurusfragilis7782]

This is now my fav channel for knives. Glad i found it. The cut tests are brilliant.

[@doodysdaggers]

That’s music to my ears!! Welcome dude 🤘

[@black79montecarlo123]

I picked up two today. One is Black G10 and the other is digital camo G10. I have other models from Spyderco, but these are the first PM's for me. Very impressed. Great video!

[@holdernewtshesrearin5471]

Yuuuup! Fully agree. Imo there are a handful of absolutely MANDATORY Spydercos every collector should have. You HAVE to have the classic Spyderco, the Delica or Endura. You HAVE to have the venerable PM-2 or a Military. You HAVE to have the best reasonably sized and overbuilt hard use knife, the manix-2. And finally, you HAVE to have another classic, either the native, the Sage or the chapparel. From there it comes down to specifics of one's tastes. Spyderco has so many greats. You can just go wild! Once you have the "Big 4" you can just waller in the goodness!

[@charliepugh9436]

I enjoyed your story. I just got the Para 3 45VM. I'm in love ❤️. The Para 2 is next I think. I'm new to Spyderco.

[@doodysdaggers]

Awesome man!! You’ll love the Para 2 if you love the Para 3. Their S45VN is Amazing!!

[@Rollshambo]

spyderco legitimately has the best factory production heat treat whether it's 8cr13mov or s90v and I'd challenge anyone to find another production brand that does that better and more consistently than spyderco, awesome video man! I've been a Para 3 guy for a minute but now I think I need to get one of these..also the shaman..I should definitely get a shaman

[@doodysdaggers]

Yep! It’s a fact! The Shaman… I know man, I’ve never handled one. Really want one. Might have to start a piggy bank 😉

[@grovesy333]

Buck is very good for heat treats yeah lower steels but you they make amazing heat treats too I love spydercos though hard to beat !

[@carmelotansengco4605]

Get the Shaman. You won't regret it. I've got the standard S30V with black G10 and I absolutely love it. I needed to work on it first but when I got it working, it has become my favorite folding knife in my collection.

[@doodysdaggers]

@@carmelotansengco4605 dude I know, they’re just so damn expensive! I will definitely get one in the near future though.

[@cannabislife1688]

@@grovesy333 I was just about to say before I read your comment Buck is another brand that has perfected heat treating with BOS heat treatment

[@blindrocket]

I love my PM2. You took yours to the next level. Looks great.

[@MrSabram07]

I have the pm2 and the pm-3 and I carry the three as the blade is just a more friendly blade size-wise

[@doodysdaggers]

Yeah it definitely is! And you hardly ever need a longer blade

[@DanCarmichael-kv4pk]

That CME is definitely the way to go. Great video.

[@bensebaugh6017]

My blade bounces off the stop like that and it's annoying, I'm used to the Manix which snaps shut and doesn't bounce. I can avoid it with a light close and quick lock press, like a button, but it's still annoying, I like the PM 2 but love my Manix 2's.

[@richardvirchow3390]

I recently bought a leather, belt holster/scabbard for my 4 PM2’s allowing for handy carry & quick-draw. Luv the knives, luv the holster.

[@doodysdaggers]

Hey that’s cool, I’ve ever seen those! Where’d you get it? I may need one

[@richardvirchow3390]

@@doodysdaggers , I got mine thru AliExpress.

[@jonathanrowan4802]

I have the PM2 I love it, I have the camo G10 with black coated s45vn . I think the only thing I’d change is the clip. I love the grip.

[@snuscaboose1942]

Nice customization. My first PM2 arrived today, CPM Cruwear with canvas micarta. Being in Australia, the supplies are limited as getting folder's through customs can be risky for the individual, the state I live in requires folders to need two hands to open...

[@WhuDhat]

restrictions are dumb, and only there to make dumb people sleep dumber at night

[@blakeolson2036]

You noticed it being more stiff/higher retention. I guess you don't have a regular pm2 to go by just like me. I have the same crucarta

[@bensebaugh6017]

@@blakeolson2036 Mine is loose, free falls and the detent is a little light IMO. The pivot I can tighten, the detent might take a bit of playing with, or I could get used to it.

[@deanP.]

Thanks for the video. This is the next knife I plan to get.

[@doodysdaggers]

Awesome, you’ll love it!!

[@harrisquicksilver6595]

Just to help solidify ur point on how awesome the pm2 is, the other liner locks use the pushing plate itself to hold the blade open and to collapse the blade, the compression lock doesnt , it actually allows a bigger piece of metal to hold the blade open. Which proves that its safer. Great huh? I love mine also.

[@doodysdaggers]

Great point, you’re absolutely correct!

[@andrewdesalvo9891]

You've definitely sold me on the blade but I'd be worried about accidentally disengaging the lock mid-use while under stress. Have you ever had any experiences with accidentally closing the knife when you did not mean to?

[@doodysdaggers]

Nope it’s never happened to me

[@ColdSpyderBuck]

Sick tats and beautiful blade dude.

[@doodysdaggers]

Thanks man 🤠🤘

[@DavidFerrell-f4s]

Great points. Could you time stamp each point?

[@Jstarr918]

After some research I chose the dlt exclusive pm2 in cruwear in burple. Great knife but,The para 3 lw with awt scales is still my favorite.

[@doodysdaggers]

Very nice! Cruwear is great, especially Spyderco’s

[@caseyjames7379]

I don't rotate my pm2 anymore , it's always in my pocket and I just rotate my other edcs , my personal all time favorite folder.

[@doodysdaggers]

Hell yeah man! Mine finds its way into my pocket more often than not. Tried and true, there’s a reason it’s so popular. Thanks for watching 🤠

[@knifenerd1776]

I’m pretty much the same. For sure Monday through Friday I always carry my pm2. I rotate a second knife. I think I’m going to keep mine stock. It does everything I need it to.

[@doodysdaggers]

@@knifenerd1776 nice man! Yep, most of the mods are just for looks. Right out of the box it’s already a fantastic knife

[@jarradmann3357]

Great video. I like your customization in titanium. Subscribed.

[@doodysdaggers]

Hey thanks buddy! Good to have you! 🤠🤘

[@stevemastbaum]

Like my PM2 but I’m left handed so there’s the bummer. I usually just carry it right handed

[@AlexanderSLeBlanc]

They make a left handed pm2!!!

[@squigglydoo9386]

Bro, how do you get the action so slick? Are there bearings in it?

[@doodysdaggers]

No, it just takes time to break in. When I first got it, it was stiff. But be patient and it will get glassy smooth like mine! 🤠

[@squigglydoo9386]

@@doodysdaggers Awesome! I lucked out and ordered my first one yesterday. It’s one of those new 15V PM2’s. I can’t wait to deck it out like you have yours, but a little different. Thanks for posting this video! The button and the lanyard hole plugs are badass ideas!

[@doodysdaggers]

@@squigglydoo9386 you got a 15V, no way! You lucked out! Those have been impossible to get your hands on. Congratulations!!

[@squigglydoo9386]

@@doodysdaggers True story. Thanks, Bro!

[@wasp_2k389]

How did u make the action so smooth? Recently bought one and the action is not as smooth thanks to

[@doodysdaggers]

It needs time to break in. Give it a few weeks it’ll get really smooth over time

[@mirandacosgrove472]

my wallet is side eyeing me rn...

[@TXFarmRoad]

👌🏻 One of my most carried

[@wills.8662]

I just received my DLC coated Wharncliffe CTS-XHP blade with Orange G-10 scales. A Cutlery Shoppe exclusive version. Oh and it came from them with flawless centering and pivot action. I also have a blacked out S45vn Para 3. I think I need to buy another knife for a while unless someone starts selling a Wharncliffe Para3

[@doodysdaggers]

Dude that’s freakin rad!! I didn’t even know there was a wharncliff version. I just looked it up, it looks so nice. Might have to try to get one of those soon..

[@Jstarr918]

The warncliffe Delica is pretty great

[@chrisnewport7826]

What can it do beyond Endura? How heavy, bulk, in pocket.

[@doodysdaggers]

I’d say about the same as far as cutting performance

[@prepsolar787]

awesome knife!!! I love my pm2

[@jjjoooojjj]

You convinced me man. Great job.. You bastard ..!!!! Now I have to drop more money on Spyderco.. Great looking knife though !! It's a like for me.

[@doodysdaggers]

Haha good, I did my job! You’ll love it man. But the wharncliff Paramilitary 2 is really badass too.. you can get them at Cutlery Shoppe. Just something to consider, both are fantastic. 🤘🤠 cutleryshoppe.com/spyderco-c81gpwcorbk2-para-military-2-3-44-cts-xhp-black-dlc-finish-wharncliffe-blade-orange-g-10-handle-cutlery-shoppe-exclusive/

[@ThreeFortySeven]

Where do you buy your knives from? Back when I was collecting, I’d go to Chesapeake Knife & Tool, but they closed down. The nearest shop to my house is over thirty minutes away, and they’re super expensive. I got a PM2 from Amazon, which I found out is a terrible place to buy from due counterfeits. I inspected it thoroughly, and am 99% sure it’s legit. Anyway, do you have any online retailer suggestions?

[@doodysdaggers]

Mostly all online. DLT Trading, White Mountain Knives, Traditional Pocketknives, Rivers Edge Cutlery, etc

[@ThreeFortySeven]

@doodysdaggers Thanks brother!

[@AGC828]

IMHO anyone with a vague interest should definitey buy a PM2. As their first Spydrco. Becasue every company has a signature product/model. For Spyderco it's the PM22. For Benchmade it's the 940 Osbourne... ...from there it's up to the us where we go from the PM2...do we stick with Spydrco and buy more? Or do you end up hating the design for whatever the reason?? :) Everyone has their list of wants in a folder's design. For me one of the items is having a "full metal linder" and maybe a metal back spacer. Soemthing overlooked by many "knife heads" or guys like me with a casual interest. Why most Benchmade knives dn't interest me. ..besides their high asking prices for what I feel is a "lesser" brand because most models lack "metal liners/ful". ...e.g. the Bugout...obvious flex in the scales...looks cheap...is there still flex in the alu scales on standard 940's? Shrug...

[@doodysdaggers]

I’m with you. I want to like BM but I just can’t. I’ve tried five or so of their knives and I didn’t love any of them. And then there is the prices… geez.

[@wayanbarre]

Have your tried the PM2 Ultra from Blades We Love? Button lock mod :)

[@doodysdaggers]

I haven’t! Always wanted to though

[@desertratedc9596]

I just ordered a CPM-M4 PM2. Originally I ordered a magnacut Hogue deka but I guess the sale I was buying from oversold and I didn't buy quick enough so I started looking around for knife models and steels I wanted to try and just do happen SMKW had what they called jungle wear fat carbon PM2 with M4 and that checks 2 box's for me.

[@doodysdaggers]

Oh damn, that’s super nice dude!! I was looking at that jungle fat carbon the other day. Looks badass!

[@christianh5839]

I’ve just bought a „new“ pm2 with s30v, is the S45VN that much better than the s30v?

[@doodysdaggers]

They’re pretty similar in the edge retention department

[@patrickmccrea3455]

I agree with everything you said love my PM2 great review i just subscribed thanks bro😊

[@doodysdaggers]

Hell yeah it’s an amazing knife! Glad you have one 🤠 Thanks for watching!

[@warroomEDC]

Just bought a crucarrta pm2

[@doodysdaggers]

Lucky!

[@Richard_Cranium_Daily]

I ran into your channel and subscribed. I’m relatively new enthusiast, collecting for almost 3 years. But I jumped in deep water. I think my collection is around 135 knives. I’m what you would call a “collection collector”. That is, if there is a particular knife or designer that I really like, I purchase several. I love the PM2. I picked up 8 each with different steels. My favorite knife maker and knife to date is the Chaves Redencion. I own 10 Chaves. At any rate, I’ll be watching.👍🤘

[@doodysdaggers]

Awesome man, I really appreciate the sub and comment! It’s always great to meet another enthusiast. Wow that’s quite a few PM2s! That’s one of the great things about them, so much variety in blade steels. Which is your favorite, can you pick? I’ve never handled a Chaves, but damn I’ve had my eye on them for a long time. One day. 🤠

[@Richard_Cranium_Daily]

@@doodysdaggers I really like the looks of what Knife Joy does with their exclusives. The orange and OD green G10 scales. Also, the SMKW carbon fiber exclusives were pretty sweet. I picked up the red “lava flow” model. I passed on the green and blue, before I bought my 1st PM2, which was the lava flow. Now, regret passing on those.

[@doodysdaggers]

@@Richard_Cranium_Daily Agreed! I remember looking at those lava flow models as well. Super sweet!

[@grovesy333]

Am getting one !

[@doodysdaggers]

Do it!! You’ll love it!

[@false-set]

Maxamet pm2s available atm.

[@doodysdaggers]

Oh yeah? Where at?

[@false-set]

@@doodysdaggers knife center. I got mine from an Australian distributor though.

[@doodysdaggers]

@@false-set okay sweet! Thanks for the heads up!

[@musicM0VESme]

I recently got a PM2 in Maxamet. I love it.

[@Nuckn_Futz]

I KNOW they're great knives... but I absolutely HATE that duck bill blade shape. So I bought a Smock for my first Spyderco and love everything about it. Removed the 2nd detent, putting Skiff bearings in. Then probably Metonboss frag Ti scales and custom clip. Nice video tho.

[@doodysdaggers]

The Smock is badass! I owned one for a while, loved it. How about the Wharncliff PM2, do you like that version?

[@Nuckn_Futz]

​​​@@doodysdaggers Nah it's not for me either honestly. There are a few Spyderco models that I do like the blade shape (Ikuchi, Spydiechef... "maybe" a shaman or manix). I just really don't like any duckbill, or any where the spine side of the blade (by the spydie hole) hump up. I prefer the spine/non sharpened side to be more traditional (flat like or slowly sloping down/drop pointy, idk lol). I'm perfectly OK with a harpoon type blade or more traditional type... but if the spine has to "hump up" to go around the spydie hole, I have zero interest regardless of the materials or customization. It's all personal preference. Hell, as a lefty I don't like to buy any knife without a rear flipper and a side button or compression lock. Yea I'm VERY picky 😂 but if I'm going to spend a couple hundred dollars (or more) on a knife, then I expect to like the basic design/shape right out of the box before I modify it. Keep up the informative vids man. To each their own.

[@doodysdaggers]

@@Nuckn_Futz oh okay! Yep, you like what you like. Good thing there are thousands of great knives to choose from 😉

[@chchchoon3091]

who makes that bigger line lock safety you have in there?

[@doodysdaggers]

The thing on the compression lock? It’s called the CME, it’s made by ocd-4-edc. It’s to make the lock easier to use

[@chchchoon3091]

@@doodysdaggers wow, that upgrade is way over priced ....

[@enjoihsu13]

How did you get yours to drop close so easy I have a pm2 with copper flytanium scales and it won’t drop at all

[@doodysdaggers]

Is it new? Mine took a while to break in well. It just keeps getting smoother and smoother. You can also loosen the pivot screw a little bit. Sometimes if you want drop shut you may have a very little blade wiggle

[@enjoihsu13]

@@doodysdaggers yeah it’s pretty new thanks for the tip!

[@TXFarmRoad]

​@@enjoihsu13 Polish your washers

[@TXFarmRoad]

​@@enjoihsu13 I've got the same setup

[@TXFarmRoad]

​@@enjoihsu13 KPL

[@revolvermaster4939]

Why do I have 6 PM2’s?

[@doodysdaggers]

Cuz they rock

[@revolvermaster4939]

@ yes they do!

[@mitchyyy18]

Sick merch!

[@doodysdaggers]

Thanks man!!

[@jeetts59]

In Australia they are almost $400, how is that a reasonable price

[@doodysdaggers]

It’s not

[@brianthompson9485]

You Australian's pay mad money for everything.😂

[@spokojnyczowiek8331]

@@brianthompson9485but kangaroos r freeeeee 😂

[@warthog91]

Just got my first Spyderco today, been ogling the Para 2 Crucarta for quite some time and finally found one at a fairly good price. DAMN the action on this thing, straight outta the box, silky smooth. Blade centering is spot on and the factory edge is better than expected by far.

[@doodysdaggers]

Awesome man congratulations! I’m sure there will be more to come. Once you get a taste you keep coming back 😉 Spyderco consistently has some of the sharpest factory edges I have seen

[@warthog91]

@@doodysdaggers This was supposed to be "the" one and done knife, but I have a sneaking suspicion you're right. Your Channel just started popping on my feed, great content!

[@doodysdaggers]

@@warthog91 thanks man!! 🤘🤠

[@hoss4876]

Are those flytanium scales?

[@doodysdaggers]

Yep!

[@hoss4876]

@@doodysdaggers thank you sir

[@doodysdaggers]

@@hoss4876 no problem! I really recommend their brass lanyard tube stoppers too, I think they’re only around $20. Unless you’re a lanyard guy 🤠

[@hoss4876]

@@doodysdaggers I probably will, unless I can find a copper one.

[@doodysdaggers]

@@hoss4876 I actually had copper on this knife before I got the titanium. It looked really good but holy crap it was soooo heavy!

[@michaelniedorf8046]

The only thing not changed is the blade

[@blackarm3265]

Your knife looks sick I think I'm sold I been stuck on microtech am my halo 6 buy I think I'm digging Manul life an u can open quietly if needed .what other knives do you favor

[@doodysdaggers]

Thanks man! The Halo knives are awesome, I’ve never gotten to handle one since they are illegal where I live. I’m jealous! I’d really recommend the PM2, or the Manix 2. Both very good work knives, or for light EDC you could go with the Para 3 since it’s a little smaller.

[@blackarm3265]

@@doodysdaggers illegal where I live too weird I can carry my 1911 10 mm but I can Cary an auto knive laws make no sense anyway take care bro

[@durango8882]

I like Ganzo

[@timthomas1176]

You left the picture in the middle of the screen during the video

[@robertstratton1805]

Actually man, the compression lock is a lot stronger than a liner lock because it uses the crossbar as a standard liner. Lock does not have a crossbar.

[@ChrisJones-yu9rz]

lol, did you tattoo over cuss words on your knuckles?

[@doodysdaggers]

Not quite, on my left hand it used to say “dumb” and I’m in the process of covering it up. Drunk tattooing isn’t always a great idea. 😉

[@helterskelter156]

Great knife platform if you’re a collector, and/or a light duty edc user. Horrible knife if you use your knives hard and like ergonomics.

[@Ratchman_5000]

The S90V version is a real slicer. I'm in the process of tricking it out!

[@vikeskie]

do not buy one if you haven't seen it in real life, they're comically large.

[@RxCGaming]

intro almost made me have a seizure

[@milanjelovac9593]

Too bulky

[@edcasquejo2899]

Where did you get the quick release, the black small thing? Thanks

[@doodysdaggers]

www.ocd4edc.com/collections/shop-cmes