3 Recommended Things to Do on the WLTOYS 124019

Welcome back to the channel!
So today we take a look at the 3 Recommended things to do on a 124019
This brand new buggy by WLTOYS is an extended wheelbase version of the 144001 and unfortunately does come with some of the issues the first buggy suffered with.
If you missed the 3 Essential things video check that out here: • 3 Essential Things to ...
I highly recommend you do those 3 things first then these 3 optional things.
In this video we will be taking a look at:
0:00 Intro
1:14 Rear Toe
All 124019 will come with Toe in from factory as this is how they are made its not an issue and sometimes can be a good thing but if you prefer for everything to be straight and true then this little mod will help get everything centered nicely.
3:15 Rear Shock Oil (60wt)
WLTOYS use the same weight of oil in the front and rear shocks but do not take into consideration the extra weight over the rear end due to that big heavy 550 brushed motor.
Adding some heavier oil in this case some 60wt will definitely help dampen those big impacts from jumps and stunts.
8:26 Droop Screws (I used 10mm M3 Cap Head Screws)
Another very good mod to do to your 124019 it will help to bring the buggy lower to the ground and also help prevent wear on the driveshafts when this thing is flying through the air.
This will also assist in reducing body roll and help with straight line stability a must do if you are intending to do speed runs with your 124019.
If at any point you want to revert back to my 144001 video you can find it here: • 3 Recommended Things t...
I hope you enjoyed this little insight in to how to do these 3 recommended tasks to help preserve your brand new buggy and i hope you get hours of excitement and enjoyment out of it just like i do!
Many more vids coming on this one in the coming weeks including a brushless conversion so stay tuned.
Cheers guys and have a great day!
Official beyondRC Merch Available now!
teespring.com/stores/beyondrc
My RC Recommendations:
Top 3 Best RC For under $100
1) WLTOYS 144001 - uk.banggood.com/Wltoys-144001...
2) WLTOYS 124019 - uk.banggood.com/Wltoys-124019...
3) HBX 16889 - uk.banggood.com/HBX-16889-1-o...
Lipo Charger: uk.banggood.com/ToolkitRC-M8S...
2s Lipo's - uk.banggood.com/ZOP-Power-7_4...
3s Lipo's - uk.banggood.com/ZOP-Power-11_...
4s Lipo's - uk.banggood.com/ZOP-Power-14_...
Excellent Cheap Servos:
JX 20kg - uk.banggood.com/JX-PDI-6221MG...
DSSERVO 25kg - uk.banggood.com/DSSERVO-DS322...
Best Cheap Transmitters:
DumboRC x4 - uk.banggood.com/DumboRC-X4-2_...
DumboRC x6 - uk.banggood.com/DumboRC-X6-2_...
******
Thanks for watching guys and If you enjoyed this video as much as i enjoyed filming it then be sure to comment, like & Subscribe!
Be Sure to check out and follow beyondRC on Social Media!
Instagram:
/ beyondrc1
Facebook:
/ beyondrc-103925521321907
Twitter:
/ rcbeyond
Get your RC Decals here: / cmvinyl.uk
beyondRC © 2020

[@beyondRC]

Hope you enjoyed this 3 Recommended/Optional things to do on the WLTOYS 124019 to get the very best out of your brand new buggy i would highly recommend doing these small mods. *PLEASE NOTE* On the video i adjusted the droop screws quite low which you may notice i was aware of this and this was for demonstration purposes only you will have to set your droop screws to your liking and set how low you want the vehicle to sit depending on your intentions you may also have to adjust camber to compensate for lowering the overall stance to get the best stability and handling possible for those high speed runs. Hope you enjoyed this video and it is pretty much the same procedure for the 144001 and i have left the link in the description above to the original video Cheers guys

[@hectorcervantes3978]

What weight should I use for the front shocks

[@allanuriah3436]

instablaster.

[@Lukas_911]

Very informative video!!! Thanks for posting

[@andrew4403]

See now that really doesn't matter if other people reviewed them or not. We like watching you not them. So people like me haven't even watched their videos cuz I watch you so I didn't even see what was going on. So it probably would be a good idea to fill us in on that. I'm not being biased but I subscribed to your channel not theirs. Just mentioning that because there's other people out there that might be like I am pretty much only watch you and maybe a couple other people on certain things. See you explain stuff a lot better than some. Keep up the good reviews and I'll keep watching. 👍👍

[@fossfamilyrc8066]

I did a brushless conversion on my 124019 and with everything surpass hobby a 7700kv and a 60 amp and maxed out at 61 moh

[@deanopud69]

Loving coming across your channel mate.will be watching all your videos during lockdown 3!!! Keep up the excellent work

[@beyondRC]

Cheers mate glad you like the channel! Hopefully keep you entertained through the lock down! lots of new vids on the way as well so stay tuned!! :)

[@Batoti_world]

Thanks for the good recommendations, I should be doing this once I received my unit.

[@beyondRC]

Well worth doing 👍😃

[@Dandalandan117]

Thanks for the recommendations. Will try these tips out on mine once I have free time.

[@beyondRC]

Cool. No problem 😃😁

[@EyesOnRC]

really good video as always, your video game is on fleek!

[@beyondRC]

Thanks mate appreciate that a lot! 😃👍👍

[@bigbeardrc4145]

You cinematography is sterling mate well done

[@beyondRC]

Thanks mate! Getting there! Cheers 🔥❤

[@ronaldderonde]

From december 2021 WLtoys sells the: 124017 version 2,it is brushless 2845 4300K. Motor gear 19 teeth,absolutly no cogging any more. Transmitter upgrade for range. I have one and it is a bang for the buck,135€ incl 2 batterys.

[@darkki94]

nice , i got myself 124018 with 2 batteries for 77$ , the brushless were a bit out of pocket for me but should be a good first RC car i hope.

[@sophie28ize]

Great advice!! Thank You!

[@beyondRC]

Your welcome 👍

[@ilovejesus973]

Thanks for all your tips.👍👍👍💯💯

[@beyondRC]

No problem 👍

[@DailyStreamerCutss]

Wow , i dint see the intro . Its pretty cool!

[@beyondRC]

Thanks 😁😅

[@tripyramidpictures9224]

Thanks

[@bretzeletouffeur7401]

Tough number 1 would be brushless swap + upgraded transmission, then number 2 change the tires, then number 3 change the body to Maserati GT3 and grind the road.

[@bretzeletouffeur7401]

Still waiting the new chassis to upgrade a 144001 :-)

[@beyondRC]

Hahaha yesss!! Hopefully it will be available separately soon 😁😁

[@bretzeletouffeur7401]

@@beyondRC Hey mate, I bought lot of different tires to test and found very nice tires for the 144001: It smells the same than real car tires, it has a premium foam inserts compared to stock tire, the "print" on it is deep, it has a very good grip for wet and dry asphalt and NOT ballooning on my 3S brushless, and best of all .... it cost less than 1 € per tire and is same original tire diameter (rare). I bough some cheap premium rims for it that are better than stock rims. Very happy, bought 1 then ordered 15 x 4 to get lowest delivery price. But now I realize than even abusing theses tires for more than 15 runs on 3S, drifting every corner, spinning the tires on hard starts and blocking it on breaks: NOTHING on tires, it is like brand new ! So I guess I will have for years of bashing with 15 trains of 4. Here is the beast: fr.aliexpress.com/item/32831563537.html

[@djwalruss4897]

Great video

[@beyondRC]

Glad you enjoyed it :)

[@joshuasalisbury789]

I am so happy with my one of these only problem now is I somehow bent one of the shock shafts so I have to wait till the new one comes

[@eediot69]

Thanks for the video. Just wondering what weight oil you recommend for the front shocks?

[@206beastman]

7

[@dollyrix8024]

🔥🔥

[@Johnny-zu7tb]

Hi I’m been looking at this model and I also seen the 104001 and the 124017 which is your recommendation todo spend the money on this for fun and I wish to add more powerful motor and the interior of steel.

[@kyhonjan]

Excellent work except I'm gonna have to disagree on the purpose of the droop screws. Droop screws are essentially to limit suspension down travel from rest not for the purpose of adjusting chassis height. Chassis height is changed by adjusting preload (shock collar). Your setup there with no droop (suspension down travel) would make the car skip and lose traction at the slightest uneven surface.

[@jbsoftwash]

What tools do I need to grease the difts? fixing to order car now and if I need a specific tool ima order it ,also any parts I should keep on hand from yr experience?

[@marcrives279]

Hi! How did you remove spring from shocks assembly, or put it back? It was on fast forward, I may miss something.

[@rogueFactor]

droop is life

[@beyondRC]

you know this! ;P

[@leoross8088]

Hey, do you think 40w oil would be good for the rear shocks or is that too close to the stock oil weight to make any difference? I only have 40w and I don’t feel like buying anything else... thanks!

[@beyondRC]

It will work fine just remember these are rear heavy so a heavy weight oil is better 👍

[@daol03]

How often should you change the oil in the shocks?

[@fossfamilyrc8066]

And now I put a 120 amp esc and a 3.5 turn sensored motor and I'm in the hundred mph now I'll do a video and show u guys when I get time

[@duncanscubie]

I like seeing all these videos. No discrimination but these cars are cheap as chips and if i break it ill just buy another one . I own 3 one for my 13 year old and one for my 7 year old and of corse one for me and we have fun out the box and it’s more than enough. Only if you are going for speed runs then this is essential . Or just have fun out of the box

[@justinsantiago1975]

Hello. Is there a good place to get those droop screws?

[@flithobbies6708]

I am in doubt between assembling a hsp 94123 kit or buying a wltoys 124019. what is the best parts durability and best parts price?

[@NsUtubechannel]

Should you adjust the spring perch after you lower the car with the screws? It looks as though the springs are compressed too much.

[@geraldrossouw4425]

Yeah, I picked that up too, he has way too much preload on the springs. The ride height (preload) should be adjusted first by turning the spring collars, the car should sag under its own weight to the correct ride height, with the lower suspension arms about parallel to the ground. The travel limits screws are just that, to limit suspension travel when needed, they are not ride height adjusters.

[@alexbarquin9]

What weight do you recommend for the fronts since the rear uses 60wt fir this car? Thanks

[@beyondRC]

30/40wt

[@markscotchford4159]

Hello, you finished the brushless conversion yet please? Or did you change your mind?

[@beyondRC]

kzbin.info/www/bejne/ipDcqqx9bpidrqc check that out ;)

[@benlait3696]

Hi did you keep the stock 30 weight shock oil in the front?

[@beyondRC]

Thats correct 👍👍

[@Sam-nz2zs]

@@beyondRChi what if I have the 124007. Would you change oil in that? And what oil would you use for front ? And for rear?

[@lovingtanja]

Which brushless upgrade do you recommend?

[@beyondRC]

Any 3650/3660 sized motor in the 3500kv+ range and 60-120a ESC ;)

[@206beastman]

Is there a new version of this buggy yet I finally got some monies

[@beyondRC]

there are brushless RTR versions now. 1/14 is 144010, 1/12 is 124017

[@wanchanel]

☝️🏎💨💨💨Wltoys 124019 is the best ✔🇮🇩👍

[@beyondRC]

Definitely :)

[@Lee-nq5om]

Why no just flip the metal bracket instead of taking out and flipping the rubber inserts?

[@conradloag7046]

Nut mom says I can do science me

[@oblOstBlockLatino]

800 Oil WTF. I have 450 oil in my 3.5kg mashine and its still bounci