As we try to maximize the storage space in our new Jeep Gladiator. We install 3 storage slides in our RSI SmartCap. Slide Masters slide-master.com/ Easy Slide www.clearviewmirrorsusa.com/t...
Пікірлер: 138
@DK-bs6mu2 жыл бұрын
Hey Guys - I have to say that has to be the hands down best jeep storage setup that I have come across on YT! Very well planned out and super use of space. You clearly put all of your experience to work! I dont see me adding a cap to my Rubicon since its a daily driver, 35's small lift - keeping it streamlined. So fun to see the versatility of the Jeep! Looks great - looking forward to more adventures!
@CoddiwompleOverland2 жыл бұрын
Thanks!
@tetsuyanagada2 жыл бұрын
I love the addition of that second, upper slide. Great use of space.
@CoddiwompleOverland2 жыл бұрын
Thanks!
@asdfjkl4262 жыл бұрын
Very nice setup. The refrigerator slide with it's ability to lower into a more usable position is like nothing else I've seen and looks super handy.
@CoddiwompleOverland2 жыл бұрын
Thank you; it has been so far.
@mbutler962 жыл бұрын
Super nice rig and I love your content. You don’t have an overlanding rig, you have a full blown expedition type rig.
@CoddiwompleOverland2 жыл бұрын
Thank you.
@robertswieciki64298 ай бұрын
Yea this is hands down one of the best set ups I have seen on here. Nice work. I wish you guys could do mine!
@CoddiwompleOverland8 ай бұрын
Thanks! We love this setup.
@jennifera7031 Жыл бұрын
Wow, that's awesome. Looks like you will be all ready when S**t hits the fan!!
@CoddiwompleOverland Жыл бұрын
We are ready.
@mikem57232 жыл бұрын
The gladiator has come along nicely. Really clever on the second tier of slideout shelving.
@CoddiwompleOverland2 жыл бұрын
Thanks!
@420ranz Жыл бұрын
Great setup! The fridge slide blew my mind hahaha.
@CoddiwompleOverland Жыл бұрын
Thanks!
@adventuresofmathiasandmarie Жыл бұрын
That custom upper slide is awesome idea 👍
@CoddiwompleOverland Жыл бұрын
Thank you!
@shilohl3191 Жыл бұрын
damn this is awesome! going to to this to my TJ
@CoddiwompleOverland Жыл бұрын
Thanks! We love it.
@sowhydontyou50617 ай бұрын
like your set up
@CoddiwompleOverland7 ай бұрын
Thanks!
@kenamsdell67412 жыл бұрын
I love the setup. Good job.
@CoddiwompleOverland2 жыл бұрын
Thanks!
@coloradotinting12134 ай бұрын
Amazing setup. Very well done
@CoddiwompleOverland4 ай бұрын
Thank you!
@oldfartsadventure Жыл бұрын
Man this is so awesome! This is all brilliant. Great job.
@CoddiwompleOverland Жыл бұрын
Thank you!
@KJsProjects2 жыл бұрын
Nice setup!
@CoddiwompleOverland2 жыл бұрын
Thanks!
@ricklitton2 жыл бұрын
Absolutely killer! 💯
@CoddiwompleOverland2 жыл бұрын
Thank you!
@campNcrawlR2 жыл бұрын
Nice setup 🤘🏼
@CoddiwompleOverland2 жыл бұрын
Thank you!
@RicardoRodriguez-zu6xw2 жыл бұрын
Sin palabras, que belleza de equipos, bendiciones
@CoddiwompleOverland2 жыл бұрын
Thank you!
@infernorcteam4 ай бұрын
This is by far the best setup I have seen. I'm currently building a Gladiator and would like to mirror your top slide idea unfortunately the bins are on backorder so I cannot take an accurate measurement. I see others have asked for this in the comments as well. Can you provide the width measurement of your top slide so that I can get one ordered? Thank you in advance.
@CoddiwompleOverland4 ай бұрын
Send me an email to Contact@coddiwomple-overland.com so I don't forget and I will get it to you.
@tnvoldem2 жыл бұрын
nice build
@CoddiwompleOverland2 жыл бұрын
Thanks!
@ducluv2 жыл бұрын
You got yourself a full time rig! 🤙
@CoddiwompleOverland2 жыл бұрын
Wish we could.
@ducluv2 жыл бұрын
@@CoddiwompleOverland keep those videos coming and I can see that in your future. Great work you all🤙
@guycumpton7382 Жыл бұрын
Great video and great build! Thank you for including us in your adventures and sharing your build ideas. F the naysayers! P.S. I am curious what Slide Master required for the upper slide? Can you give more info on that? Thanks.
@CoddiwompleOverland Жыл бұрын
Thank you! All that is required is your measurements.
@TerraOutdoors Жыл бұрын
I have to say, that is a pretty awesome setup! It certainly doesn't look like any of the real estate went to waste. I love seeing how people go about building out what's underneath their SmartCaps. Any concern on having a fridge that large/heavy at the end of such a long lever? I imagine that thing is putting quite a bit of force on the mounts.
@CoddiwompleOverland Жыл бұрын
The slide is a 1,000-pound slide and the frig slide is designed to come off the large slide and supports up to a 75 quart frig.
@matg_55642 жыл бұрын
Kelly got a new rig 👌🏼
@CoddiwompleOverland2 жыл бұрын
Yes, he did.
@matg_55642 жыл бұрын
@@CoddiwompleOverland any reason or did he just wanted the upgrade?? Going to miss the 4th gen but that 5th gen wagon looks good 👍🏼
@livinthelife60562 жыл бұрын
Love the set up the fridge slide is great need that in the truck for my 4’11” wife !!!. Why does Kelly not have more on his truck ? Still uses it for work maybe ?
@CoddiwompleOverland2 жыл бұрын
He is retired from the Coast Guard. He has a plan but has not executed it yet.
@troutriver582 жыл бұрын
really impressive and I'm sure it took a lot of work and craftmanship to put this all together. however, I think you might be in for an unfortunate surprise if you go weigh the rig at a CAT scale. If you are under GVWR you deserve a nobel prize.
@CoddiwompleOverland2 жыл бұрын
Thanks for watching.
@marknelson96152 жыл бұрын
LOVE the setup and looking to do something similar in our truck. Researching bed slides I've narrowed it down to either the Highway Products XT-1200 or the SlideMaster SM3-SP with 3/16" tray. Why did you choose the SlideMaster? Do you know the height of it, the dimension from the truck bed to the tray? Thanks!
@CoddiwompleOverland2 жыл бұрын
We chose Slide-master.com because of their history, quality and price. Our 70% slide sites 3.25 inches above the bed
@simplefool99 Жыл бұрын
Outstanding design! very much like it. Can you share the specs of your second slide (model, dimension) and how you actually mount it? Would be great if you plan to have a video in the future to cover all the details. Thanks.
@CoddiwompleOverland Жыл бұрын
We will work on that.
@miketell81822 жыл бұрын
Super awesome looks like it is ready for that ultimate long road trip . Have you weighed fully loaded?
@CoddiwompleOverland2 жыл бұрын
Not yet.
@scottbloodworth7798 Жыл бұрын
Awesome setup! I'm looking at the SlideMaster AH3 for my Gladiator an was wondering what is the width of your Bed Tray and how much room does it give you between the side of the Tray and the Wheel Wells? Also, was there anything preventing you from mounting the Easy Slide all the way to the left side of the Tray? I have a Dometic CFX3 75DZ and ClearView recommends the ES-220 Plus for it, which I believe is the same model you have. I'd like to mount it all the way to the left side of the Tray if possible.
@CoddiwompleOverland Жыл бұрын
The cabinets prevented us from mounting all the way to the side. The tray is 43 1/2 wide. It gives you about a 1/2 in on each side of the wheel wells.
@outbackwack3682 жыл бұрын
Man, that is one sweet setup! Good job! How much weight did all of that stuff add (or detract from payload)? What was payload before the cap and mods?
@CoddiwompleOverland2 жыл бұрын
I'm not sure, we haven't put her on the scales yet...
@troutriver582 жыл бұрын
@@CoddiwompleOverland you might be in for a surprise
@CoddiwompleOverland2 жыл бұрын
Probably
@bennie873 Жыл бұрын
I love it. Would like to do that to mine. Those slides are pretty expensive aren’t they? Also what do you air your tires down to on the trail?
@CoddiwompleOverland Жыл бұрын
No this slides are not cheep but we found the slide masters are less expensive than others, they have been making slides for firetrucks for years. The tires depends on the trail, we typically air down anywhere for 14 to 25 psi.
@trail_tracker Жыл бұрын
Very nice system. What dimensions did u give to slide master for the cargo slide? And what shims did u add to clear the tailgate?
@CoddiwompleOverland Жыл бұрын
We did not add shims. I dont remember the exact measurements. There web site will give you the information on how to measure your bed.
@Berserkeroffroad2 жыл бұрын
What's your payload after you subtract the cap, drawer system, RTT, fridge, and yourself? A stock Mojave has a 1,200lb payload and I surmise when you're loaded for a trip you're pretty close to that. Thanks for sharing.
@CoddiwompleOverland2 жыл бұрын
We haven't weighed her you but I would say you are correct
@paranormalwheelers Жыл бұрын
@CoddiwompleOverland us I can tell it's over the abou t. People forget there own body wt and fuel needs to be added to the equation 😅
@CoddiwompleOverland Жыл бұрын
👍
@gregandbethpawluk2316 Жыл бұрын
weird question. are those sliders able to lock out in position and be used as like an extended bed to haul lumber as an example? Just curious if it has everyday functionality as well.
@CoddiwompleOverland Жыл бұрын
Yes.
@cradb12486 ай бұрын
Bill, what is the dimension from the bottom of the smartcap bin to the floor of the gladiator bed. Thanks in advance and one day I hope to meet you on the road.
@CoddiwompleOverland5 ай бұрын
19 1/4”
@RangerDogTraining Жыл бұрын
I have a question. How long was your slide to fit the water tank in. Also what the water tank you used. I’m building mine now. Thank for the information
@CoddiwompleOverland Жыл бұрын
Ironman water tank. We will have to measure the slide
@RangerDogTraining Жыл бұрын
@@CoddiwompleOverland thank for the help
@CoddiwompleOverland Жыл бұрын
We are at an event this weekend, but I'll try to get it measured
@bradmorgan5909 Жыл бұрын
Do any of your videos go into your electric/light setup in the SmartCap?
@CoddiwompleOverland Жыл бұрын
No
@geofflau3002 Жыл бұрын
Did you have to take apart the roof tracks to add the crossbars? If so how do you get access to adding additional hardware for other components ?
@CoddiwompleOverland Жыл бұрын
We did not add extra hardware
@therealbrennanmuir Жыл бұрын
What are you using to control the lights? Also curious how you connected your ironman water tank to the smartcap
@CoddiwompleOverland Жыл бұрын
Aux beam to control lights in the back. Ironman is connected with an RV style water inlet and a 1.5 hose. It is mounted to the bed.
@SRSLYREEL2 жыл бұрын
Any details on the custom slide made from slide master for the smaller one above? Building a similar setup with the RSI smart cab and the upper slide looks great.
@CoddiwompleOverland2 жыл бұрын
What details would you like?
@SRSLYREEL2 жыл бұрын
@@CoddiwompleOverland Did you have some of the modules populated in the RSI smart cap? I see the insides look like they have the bins, kitchen, or drawers. Do you have the dimensions of the top slide or any more video you can share?
@CoddiwompleOverland2 жыл бұрын
Let me put something a little more detailed together.
@jenching332 жыл бұрын
can you share the dimensions?
@bradmorgan5909 Жыл бұрын
What’s the lighting control system on your RSI shelf? What lights do you have hooked up to them?
@CoddiwompleOverland Жыл бұрын
It's the Auxbeam switch system and just lights from Amazon.
@bradmorgan5909 Жыл бұрын
@@CoddiwompleOverland thank you sir.
@CoddiwompleOverland Жыл бұрын
👍
@blitzinger18 ай бұрын
One year later - how do we feel about this set up? Still the same? Any changes? This has been a huge inspiration for my build
@CoddiwompleOverland8 ай бұрын
It's still the same, and we still love it.
@blitzinger18 ай бұрын
Also do you have the dimensions used for the slide master bed slide?
@CoddiwompleOverland8 ай бұрын
Contact slidemaster, and they will have you measure for your specifics.
@cradb12488 ай бұрын
Do you carry gas RotoPax? If yes, where do you store them?
@CoddiwompleOverland8 ай бұрын
We do we have mollie panels inside on the bedside. kzbin.info/www/bejne/nYTad3WJqcl6bdk
@TheCarter9992 жыл бұрын
Do you have a video on the lighting inside the RSI?
@CoddiwompleOverland2 жыл бұрын
We don't not. But, we will have a full video of the Gladiator coming out soon which will include lighting.
@richardxue82774 ай бұрын
Hi, may I know how did you fit 37" spare time under the bed of your gladiator?? Is it should not be fit in??
@CoddiwompleOverland4 ай бұрын
Clayton rear track bar allows for up to a 38"
@slomofo12 жыл бұрын
I'm actually going to do exactly this, at least on the bottom level. I'm curious about your lighting setup, and that little digital panel that you have to turn them on. Could you educate me on that?
@CoddiwompleOverland2 жыл бұрын
The panel is an Auxbeam switch panel: amzn.to/3lNPFrl
@CoddiwompleOverland2 жыл бұрын
These are the lights on the doors amzn.to/3PKl0cd
@CoddiwompleOverland2 жыл бұрын
Inside the Smartcap lights amzn.to/3lOCPZL
@slomofo12 жыл бұрын
Thanks so much!
@CoddiwompleOverland2 жыл бұрын
Your welcome anything else let me know.
@kengeroo Жыл бұрын
what's they payload weight on that beast ?
@CoddiwompleOverland Жыл бұрын
Not sure. Have not weight it yet.
@diesvincent19042 жыл бұрын
What size is your slide? Front to back?
@CoddiwompleOverland2 жыл бұрын
Which slide?
@blitzinger18 ай бұрын
Is that the Clearview 150 or 220?
@CoddiwompleOverland8 ай бұрын
Largest one. 220
@blitzinger18 ай бұрын
@@CoddiwompleOverland thanks for the quick reply! I wish I knew y'all were at overland east, I would have seen it in person. How much does the Clearview offset from the right side? The left side looks tight. Essentially I want same set up with my 75q dometic and 82l roam box on left
@CoddiwompleOverland8 ай бұрын
I'm traveling right now. I'll get it to you asap.
@cradb12482 жыл бұрын
What is the top slide mounted to ?
@CoddiwompleOverland2 жыл бұрын
To the roof and to the side boxes.
@go2homesource2 жыл бұрын
Can you a close up of how you mounted to the bins and roof? Any issues now that you have some time with the upper slide?
@CoddiwompleOverland2 жыл бұрын
We will work on putting something together as a few others are looking for info also.
@CavemanOutdoorsMissouri2 жыл бұрын
Really, nice setup. It's too bad the people in the background couldn't be quiet for 5 minutes.
@CoddiwompleOverland2 жыл бұрын
Sorry, they were excited to be there.
@Tail_Dragger2 жыл бұрын
Great set up. I agree with the other comment about all the noise in the background. Super distracting and really shows a lack of common courtesy. The only thing missing was a Moore hat. I hope that the onslaught of “sponsors” subsides a little bit. I used to love how barebones, real world your videos were.
@CoddiwompleOverland2 жыл бұрын
Thanks! However, the onslaught of "sponsors" were not sponsors but were simply the manufacturers that we went to to PURCHASE these items. I named them because I knew that people would ask where they came from. This video was meant to be informative, not an advertisement. My apologies for it coming across that way..... We do have some great sponsors. This allows us to do what we do without having to have a Patreon account and charge people for our tracks and way points etc.... Bill
@Tail_Dragger2 жыл бұрын
@@CoddiwompleOverland I meant the first 30+ seconds of a 4.5 minute video. I know it’s hard to believe but there are subscribers out here who watch your channel for the adventures you guys have. There are more and more channels loading up on sponsors “so we can continue having adventures”. Adventure within your budget, just say no to Overland Welfare.
@maniacalscience Жыл бұрын
Can you adopt me?
@CoddiwompleOverland Жыл бұрын
😄
@maniacalscience Жыл бұрын
@CoddiwompleOverland seriously this is sick. I just put an RSI Smartcap on my Tacoma today. I need to watch more of your videos and absorb the rest of your advice but I super appreciate you figuring out all the hard stuff for people like me just starting out.
@CoddiwompleOverland Жыл бұрын
Glad you like it.
@WilliamEnnis43802 жыл бұрын
Just some feedback, the microphone was picking up voices in the background. I found it distracting so I stopped watching after a minute and half. Sorry.