3000 Watt Generator Powers Itself, Grinder & Drill Press.

[@Wide000]

This is so fantastic! You plug two motors together, give it a spin, unplug and you can extract energy inside the matter, the empty space in the atoms, ''ground zero'' as you call it? Even the 27 km wide LHC (Large Hadron Collider) in Switzerland built at the expense of many billions of dollars is stone age technology compared to what you just accomplished. What you just demonstrate is thousand of years ahead of what can be done by the most advanced scientists of our time equipped with the most expensive and sophisticated equipment! Truly incredible! You guys surely knows how to plug two motor together,..

[@007nth]

this was my ideal when i was 14.but no one agree with me.

[@techtiptricks]

We received our unit this week and its working great, delivering about 3200 watts, we are very satisfied. Thanks.

[@FLSweatt]

Did they pay you to say that?

[@mikegrissom9216]

Anyone looked into the atom, like the one when split goes boom, all matter vibrates, when someone can harness that? And there is enough anger in these post to power a couple of cities.

[@fuckyougoogleplus8667]

"The additional energy is from Ground Zero" It was at that point that I realized this was a joke video.

[@tubetonez]

I have a background in electronics, and also used to do stage magic. I can think of several ways to duplicate what's seen in this video, without resorting to computer enhancement etc. If it actually worked, you should be able to: Film at a large public parking lot, one that is asphalt or concrete, wide open area with no pole lights, curbs, nothing nearby. Use a vehicle with a hefty invertor and an extension cord. Bring a toaster. Leave the grinder and drill press at home, Set up the table with motor, generator, and toaster. Run extension cord from car invertor, crank car and start the motor/generator, flip switch to the "perpetual motion" setting. Unplug from extension cord, place in car. Your accomplice drives away in the car (you need an accomplice), leaving the gizmo running - with nothing nearby, asphalt or concrete all around. Plug in toaster to gizmo, toast a piece of bread. Will this work? Or does the magic "Ground Zero" pixie dust not flow through asphalt?

[@gordongravelle2524]

I hope that Santa brings me one for Christmas!

[@electriciandallastx9182]

Thanks for the thoughts you have provided here.

[@louisphilippe1100]

Thx m8 for putting your research in the description! Not many does it.

[@jackpwade]

This system depends on maintaining an equal draw, soon the power catches up to the return of the generator and it slows down by placing a rheostat/dimmer switch from the the neutral or ground rod of your house you can maintain a higher impedance level forcing more energy to be created by the generator. In other words instead of using their power use their return, the problem is that the meter will still charge you for that. So a ground rod would be best. The generator is putting out power on one lead but depends on a vacuum from the other. This is the system Nikola Tesla Designed for us, It is what the government does not want you to know. which begs the question who is the government, JP Morgan and friends.Who really owns the fed, The government, who do they blame it on, JP Morgan and friends. Stop listening to those fools and build this system to power your house. Then while it runs when you are at work, store energy into huge capacitor banks that fill and blast it back through the feed line from the power company, it will force the meter to run backwards and this JPMorgan Government will have to send you a check each month. It works, it works really well, the secret is staying ontop of the impedance level to keep the motor/generators pulling. Freedom is telling them to stuff the "god they trust in" into your bank account. It would almost be financially better to sit at home babysitting a massive generator and Capacitors and dumping it into their system non stop. Make that meter spin backwards, its a living.

[@corthew]

I have a water fountain that shoots water up high enough to fill the bucket that provides the pressure to shoot the water that high. I drink from this fountain, water my garden and refill my toilet and it always has enough water to shoot the water through the spout up into that bucket. This is all thanks to quantum fluctuations that seem to only act in the direction I need it to to ensure I get more water out than I put in.

[@MickeySaintlyMicSmith]

This works! I'm essentially building a similar setup, except I will use a coupler instead of a belt. Also, my invention will generate over 10,000 watts, and will be started with a battery.

[@jerbear6947]

i though about this a long time ago. And people said it wouldnt work. I said yes it would. the pay out per-watt(KVA) is low for usable energy also due to reactance but It would take a set up the side of a room to create enough power back then I thought. But the first computers took a room full to out put a single small sentence.

[@MicheleRomeo]

It sounds interesting but mechanisms behind this video are hidden. I don't see anything that justifies the apparent violation of the fundamental conservation of energy's law. Please, show me your conquest in a scientific way with the few words you need to do that. If you are not able to show them or you give just two or three confused explanations about the 'nature' of your management of physics, forbidding me to replicate the phenomena behind your machine, I can't agree with you. This is science. Thanks, Michele

[@TheWorldSolutions]

See www.witts.ws/faq/ for more information about WITTS, and contact us there to schedule a consultation.

[@MicheleRomeo]

I'm sorry but I surfed your webpage and I see no science behind that. Although the original intention can be driven from a religious feeling about the problem of the human life on the earth, there must be not any link between the religious point of view and the scientific approach. I see no science in your explanations of the various things you try to investigate with your pseudo-theoretical methods. I'm a scientist and I cannot share both your methods and your approach, which are not aseptic and rigorous as well. Regards, Michele Romeo

[@goesintite]

Michele Romeo Have you really (honestly) tried to replicate this experiment? Does TheWorldSolutions provide a wiring diagram/schematic? It seems like it should work considering the output of the generator vs. the motor current draw.

[@TheWorldSolutions]

Miguel Grande Replications: Electric Generator Replication (WITTS Technologies) - 1 Electric Generator Replication (WITTS Technologies) - 2

[@MicheleRomeo]

Miguel Grande , thanks for your reply. Whether you have clear elements to reproduce the experiment in object, please provide me one chance to do it. I'm a physicist but I'm an industrial engineer too in italy (electric engineering) so I can try to reproduce it following clear technical methods. Best regards, Michele Romeo

[@22marauder1]

Thanks for the demo. I have two of these rigs going at my farm. I use a duplex system with one small motor / gen set that I just hand crank then throw the switch. It puts out about 500 watts in excess power. I use this fed into a larger stage that starts slowly but gets up to speed in about 30 seconds then puts out about 5kw excess. Recommend this because what if you have no AC power to start! Can't get near 200x power out, but mine is easy to build and plenty adequate. email me for info.

[@1concreteguy]

I like how there are so many people on here that think they've invented physics, and talk down on those who believe there is a way to overcome the laws of physics. At least those with ideas are thinking about stuff which is better than those that sitting around judging those not afraid to try things, that's how you learn. I have heard so many say the idea of perpetual motion is impossible but yet it is right in front of every one of us everyday and you do not even realize it. The sun spins around this planet everyday, and rivers flow everyday if that is not perpetual I don't know what your going to make mechanically that is. I will continue to believe that it is impossible when those things I mentioned quit turning which wont be in anyone's lifetime so if you have a more defined idea of perpetual motion id like to hear it.

[@dannysharp33]

y

[@xandroth8989]

I have a bigger version of this at home and yes it does work, but not patentable. People have to realize that Rare Earth magnets within PMA's produce infinite amounts of energy and all that's required to harness that energy is a conduction and movement such as with copper and an electric motor. Rare Earth magnets require no energy so the only energy used is for movement and even better is perpetual motion which works as well without electricity, but it puts out far less. The government will not allow these devises to be mass produced because it cuts a lot of money from a lot of pockets. What makes matters even worse is that electric cars can and eventually will recharge themselves with the same concept. These devises could save the world and make things easier on everyone, but people tend to be consumed by greed and live for the here and now rather than the future.

[@sekhara]

This has been my dad's life time project; he did numerous experiments on free energy, and this video is very close to the one he worked on. Unfortunately he is very reluctant on disclosing his work due to the industry threat over free energy research. One day I'll help him get the recognition he truly deserves. I'm proud of my dad, he is one of the genius and precious!

[@ts89540]

This is real, NOT fake. I bought it off of him, and am now making my own. I've modified it by placing it inside a 1metre coil made from 8ga copper wire. I then surround that by 11 Tesla turbines. If you place the entire apparatus on a record player and spin it backwards, unicorns spontaneously appear. Yeah, I know it sounds fake, but it's not. Heck, my pet dolphin is mating with one of the unicorns as I type this. You go girl!

[@Xynudu]

Neither the drill press or the grinder start up caused the generator to slow from the load. Any normal generator will lose revs under this situation. Also a generator capable of driving either of those units would require more than 3/4 HP. This video is total bullshit.

[@funkyfox63]

I thought about this for 2 minutes and did a diagram on how this would work. The key is getting the primary motor up to speed and using one that uses less power than what we want to generate. Maybe a 750 rpm Ac Motor with a pulley wheel four times larger than the pulley wheel on the generator will bring the speed up to 3000rmm. This will then generate power which can be fed via a changeover switch which knocks off the mains electricity to the primary motor and replaces it with some of the power that has been generated. the remaining power is used to operate your electrical appliances and is limited by the wattage output of the generator. Don't forget that because the primary motor was started on mains voltage and is running up to speed, it does not require much power from the generator to keep it running, The only problem I could see is getting the right motor for the job. ie a continuous running motor maybe half a horse power. Would continuous use for hours burn the dam thing out? If your not electrically minded ,or a spark I would recommend not trying this. Remember, Electricity can Kill.

[@JohnSmith-yh4qt]

I find it funny that people are always stating things like; "you cant get more energy than you put in", and "law of conservation of energy" and whatnot like they are the ones who thought of it, but most people rarely think about this: Matter is pure energy in solidified form. You're using an incomprehensible amount of individual atoms arranged in such a way to generate electron motion through a set path. You're only transferring motion from one path to another, who says one path is more possible than another? The fact that all atoms are in themselves perpetual motion machines should always be accounted for within your argument before one flat out denies the existence or possibility of a perpetual motion machine.

[@derpsauce719]

When they FINALLY get it.. there will be those of us who have been living an entire generation, or TWO off the grid, with power... shakes head... I'm not sharing. they wouldn't listen, don't care. HAHA

[@jets705]

real

[@jmowreader]

John, physicists continually make new discoveries about the state of the world, and the newest research on the structure of an atom (called "modern quantum mechanics") says electrons don't orbit the nucleus in nice neat shells. Modern quantum mechanics says electrons are held in a cloud by electromagnetic forces.

[@JohnSmith-yh4qt]

I never said anything about the orbital habits of electrons. This modern quantum mechanics theory would not happen to resemble the Schrodinger/Heisenberg model would it? Either way; I don't think it really matters for the layperson. All that matters is making sure people keep an open mind to what is possible, and so far in, what is possible far outweighs that which is impossible.

[@thematrixkid17]

Just as you say, people have been converting matter into energy for hundreds of years. It's called a wood burning fireplace. That's hardly the same thing as perpetual motion, however, as you continually need more matter to convert to energy.

[@danharvey5154]

Let's do some simple math Children: This is a 120V system. The Generator generates 2900 W of power. Power= Volts*Amps (Ohms Law for AC Circuits) If the Grinder draws 14 amps and the Drill press draws 16 amps (we aren't even looking at Lock Rotor amps here {Inrush or start up}) then this generator is producing 3600W ((14+16)*120). or 124% of it's rated capacity. Never mind He claims the Motor on the M-G set is being driven by the generator. You sir, have defied the simple laws of math and physics with your claim and I declare it garbage.

[@Matlalcueitl]

Not to mention 100%+ efficiency...

[@tycoon9201]

*Energy Technology* *Some of the most powerful content anywhere* *digitalproduct.hol.es/?gocbp=4472* Cory Harris

[@masso172]

Very accurate response! And lets not forget about the internal resistance of the generator acting on the motor after a load is being applied by the power tools. You just can't… it doesn't work.

[@masso172]

Niko grossenbacher Can you elaborate more on how that may be ?

[@derpsauce719]

Before you claim the intellectual victory, you may just want to pull that stick from your ass.. Any argument, in favor or against a claim is instantly discredited when it starts like the way yours did.. So here's it back acha.. Child. You are stupid. I built this, it works, I live off grid for free. I pay very very little in gas to start my power and nothing to keep it going. I only shut it off when I don't need it. Fools living in the cities full of LIES. You are obviously missing shit.. dude.

[@ConstantlyDamaged]

By far the most amazing thing about this is that there is no noise as the load is put on the electric motor, nor does the belt even look like it is under load! Clearly this generator makes so much power that it barely even works hard in this vid.

[@shaynegadsden]

ok for any that thinks this could even possibly work I am an electrician by trade now for over 15 year simply put we cant make a device with 100% efficiency let alone over that the motor at best is 90% the generator the same if not less generators are simple machine so are the motors just measured coils of wire to produce a magnetic field that magnetic field is also what limit how much power the motor uses and what the generator makes it cant not be altered that is against all physics in order for the generator to make more power it needs a greater magnetic field which creates more rotational drag causing load on the motor increasing it power requirement move this from where the idea load/rpm is for either device efficiency decreases drastically 'free' energy is not possible as many great people have said energy isn't created only transferred so our best bet to find the cleanest most efficient way of doing that not wasting time on this

[@TheWorldSolutions]

The additional energy is from "Ground Zero", it is not created, it is there already and the Law of Conservation of Energy is referring to an isolated system, but strictly isolated systems do NOT occur in nature.

[@shaynegadsden]

That is the biggest load of bs since you not even talking about the conservation of energy only changing it's state from electrical to rotational and back to electrical

[@caseyspeaks6380]

Daniel Jefferson I hesitate to assume this "inventor" knows enough science to scam people. I find it more likely that he "invented" the transformer. He said he rewired the generator. I also question why his 3300 Watt motor was powered by an 1800 Watt electrical circuit without tripping the circuit breaker.

[@jamiesumers]

sound good to me.

[@xxOkieTacoxx]

Casey Speaks he isn't powering a 3000 watt generator with the 1800 watt circuit. He is powering a 3/4 HP 120v induction motor which pulls maybe 5 amps.

[@Deathswitch669]

i want to know how to make this modified coil he speaks of

[@ytugtbk]

Love the train horn in the opening. Establishes instant credibility.

[@DefaultName-hx1qz]

can I please get the specs on this so I can have free energy at my house

[@TheWorldSolutions]

yes. see witts.ws

[@JoeCognescenti]

Yes, it is possible. I have seen a similar hook up where the 2900 watt generator is connected to a hamster wheel!

[@tycoon9201]

*Energy Technology* *Some of the most powerful content anywhere* *digitalproduct.hol.es/?gocbp=4472* Kevin Barry

[@stargateeer]

I have seen an Apple power an ipod ;)

[@kimobrien.]

Do the hamsters get to eat? I expect that the hamsters are like a battery eventually they die or get tired. Maybe they will reproduce and all you have to do is feed them. Cert of like hanging a carrot in front of a donkey. Apples are acidic and putting to dissimilar metals into it will create a small amount of DC power. How long dose the ipod run? Eventually the apple dries out or one of the metal electrodes corrodes to be unusable. What you have discovered is a dry cell type of battery. I'm surprised Apple Corp doesn't market it as a organic battery powered version ipod.

[@felicianoabe]

stargateeer haha lol thats funny

[@tweelet]

Wow,this is simply GREAT!!!!, when I was 8 years old I used to draw funny looking cars with 2 huge electric motors. In most all the drawings it said "a very funny looking car by Mitsubishi Fuso". Powered by pushing car about a block and the Generator takes over and powers the big 400 hp motor made by Century Electric. My drawings were funny humor, but wow I never dreamt it was possible. A working model in the future.

[@imamagnetfanatic2524]

They try to make people think is electrolysis of water consumes a lot of electricity and expensive fuel cells are needed. Neither is true. Magnetism along with other affordable materials are EXTREMELY effective catalysts and make the process exponentially more efficient. This can even completely eliminate fuel cells 100%. This WILL produce a limitless abundance of cheap and clean power. That's the real secret they don't want you to know or understand. You will understand the Law of conservation of energy is not broken when you understand that EVERYTHING IS ENERGY!

[@imamagnetfanatic2524]

Ignore the trolls. Let us all spread the word. We could have access to all the cheap and clean energy we could all need. Deadly and polluting Nuclear and Oil are 100% unnecessary. Everything to the contrary is a lie. And remember that this has nothing to do with me, this has everything to do with you and everything you care about and your future. The quality of life for all humanity could easily increase exponentially.

[@robguyatt9602]

Ima MagnetFanatic According to String Theory, yes everything is energy. But find me one string theorist that agrees with you that because everything is energy the 1st law of thermo is not broken.

[@imamagnetfanatic2524]

Rob Guyatt According to Albert Einstein everything is energy. E=mc2. I tell you what, you find me all the string theorists in the world that I can talk to and who then disagree with me. You idiot jerk.

[@imamagnetfanatic2524]

For the millionth time, the 1st law of Thermodynamics was an axiom formulated by an alchemist 400 years ago with absolutely NO concept of modern chemistry, of what an atom was, much less quantum physics. It does NOT apply to quantum physics.

[@imamagnetfanatic2524]

sam kelley Amen to that. It's not just one invention they are suppressing, it is multiple categories of inventions each of which could have many different uses. It's not just the inventions themselves they are suppressing, it is entire areas of science and scientific study. All to keep us stuck 100+ years in the past. And it's not just science and invention they are suppressing, it is truly all of humanity that is being kept enslaved by it's own ignorance.

[@terracethornhill]

This may or may not be genuine, but I don't think it's wise to close your mind to the possibility that there may be ways to extract energy from the electromagnetic environment. There is energy all around us, I don't think it's that big of a stretch to think we can harness it somehow.

[@nightmarethunderfist]

i agree

[@robertmencl9169]

take a physics course.

[@terracethornhill]

Robert Mencl The law of conservation of energy only applies to a closed system. We live in an ocean of electromagnetic energy.

[@Jakthehero33]

nice, I actually thought about this back in sophomore year of HS, asked my science teacher about it and he told me that it would not work since it was a perpetual motion machine, well you just proved him wrong. :) this is the future bro. XD

[@lucasschofield8716]

to the people saying "energy companies don't want you to know" I accept that if it was possible for profit companies which keep it hush hush, but you know who doesn't give the slightest fuck about profits? the military, if you offered them a way to power everything permanently for free theyd snap it up immediately. Don't believe this tripe.

[@dxhydrodotcom]

Dude -You're sitting on the biggest invention in history! Here's the plan: Install with the motor shaft and the "modified coil" generator in one larger unit, then connect a bunch of them together. Make an array of 600 units and install them in a shipping container. Each of these containers would produce over 1-MEGAWATT of FREE POWER! Just think of the possibilities. No more need for any fossil fuel as we could scale these units to power homes, factories, cars, trucks, ships, trains, motorcycles -you name it! Better yet, use the FREE POWER to power reverse fuel cells that produce hydrogen or methanol so the energy could be transported on tankers & used anywhere in the world. The methanol could easily be made into feedstocks to make fertilizers, plastics -All of the stuff we use petroleum for could be made out of the methanol produced with this free power, CO2 & water! You should probably go into hiding until a few prototypes can be made or you could end up like the guy that invented to 100mpg carburetor or the guy that built the first diesel engine (meant to run on peanut oil). I'm sure Halliburton & OPEC already have a contract out on you after seeing this video. They've probably already got you.

[@TheMegaSine]

I built one of these years ago... Sooooooo Cool to see some one making one....V Cool the very first one I built was with a bike generator and a modified RC car motor. then I moved up. Now I have one that I built that I will not share YET..But I am V happy to see this VId.

[@arnaldy1]

It's a perfect hoax. No signs of speed droop on the generator when he turns on the grinder or the drill.

[@TheWorldSolutions]

Lenz law is eliminated.

[@vertikalvt]

TheWorldSolutions the description says this does not violate any laws of physics, yet here you state that Lenz's Law is eliminated. You can't just eliminate a law of physics. That's like saying I choose to ignore gravity. Regardless of the SOURCE of your power, as the charged particles, in this case electrons, move throughout the system, you will have a magnetic field that OPPOSES the change in magnetic flux. Look, the idea of a self-sustaining resonant system is nobel concept, but it's also nothing new, and the critical issues have been thoroughly explored. Unless you're using superconductors, the wires will have resistance, and you will lose power as heat. As long as there are bearings, you will have friction. As long as there is an atmosphere, (i.e., not a vacuum) you will have drag. As long as there are gaps between the rotor and the stator of the motor, you will loose field strength due to the inverse square law. IF you were able to correct all these, you could have a system that might self-sustain for a very, very long time. However, the final nail in the coffin is that even in this perfect scenario, the total energy of the system would still be finite, measurable, and predictable. Which means that to put any external load onto the system would be removing energy from that system. In this case, using a rotating mass, you're storing energy in the form of angular momentum. Also known as a flywheel. In fact, if you wanted to make this contraption even more spectacular, you'd make it larger, MUCH larger, like the size of an entire room, with large heavy flywheels on perfectly aligned bearings. In that scenario, pulling 5kw-20kw loads would be trivial, without the need to hide your secret wires that are really providing power to this machine.

[@hotdogandahayride9823]

Bert Green Don't waste too much of your time refuting the trash science put forth by this group of diseased idiots. They're more than happy to ramble on endlessly about fields of study which they haven't the most fundamental understanding of. If you sprinkle the description of your worthless endeavors with the word 'quantum' enough times, you just might fool someone into donating money for a good cause.

[@electrocanman]

I achieved the same effect by eating at Taco Bell, every meal, for one week straight. My methane powered infusion generator doesn't even need wire, the electricity produced is captured nasally, and promulgated freely within a 50 yard radius from my generating "source". That, my friend, makes more sense than the bullshit you're trying to sell to the undereducated here. Transformation of energy requires... energy. Here's a simple test: can you define the value "f" electrically? No? Obviously you cannot, there is no free lunch, and I hope you fakers screw up and do something that gets you in the cross hairs of whatever authority you live under. Lying in one thing, lying for financial gain is quite another. May you reap what you sow.

[@jmowreader]

A steady diet of chili would work better.

[@electrocanman]

Jim Mowreader, that would be an unsustainable discharge, at some point the output would exceed the input, and much like the fantastical generator in the video above, I would only exist in fantasy and pyramid schemes.

[@armadica10]

When the grinder and the drill press started up there was no change in the sound of the motor, meaning no speed change that would usually occur when u put a load into a closed system like that.

[@SuperVanGogh13]

Maybe a flashlight powered by a solar cell that is powered off the flashlight?

[@danstadden9155]

More like using an electric water pump to pour water over a waterwheel, which generates the electricity to power the pump. You know, for a more old-timey feel.

[@gaius100bc]

oh humanity..

[@888goingup]

Since I was a kid I knew this could be done. I remember doing little sketches of a similar machine. Everyone said it could not be done. Hahaha now I see it with my own eyes. So awesome!!

[@decoysk]

SHOW US THE WIRING ! dude I`ll have what your smoking !

[@TheWorldSolutions]

FREE CLASSES! After you study the free classes on the website, THEN AND ONLY THEN, send us a email. witts.ws contact us page

[@kansasthunderman1]

Have you tried building a Snake Oil/Balonium battery? It consists of Balonium plates with snake oil electrolyte. A small battery can power a full size electric car and the greedy oil companies can kiss their behinds (and huge profits) good bye.

[@kriscreswell315]

Schematics. We all need/ want to study this design. Your machine is life changing. Free your energy!

[@pinemeadowshobbyfarmafruga8319]

I believe in over-unity

[@JonCammarata]

Stop bullshitting people.

[@ConstantlyDamaged]

By far the most amazing thing about this is that there is no noise as the load is put on the electric motor, nor does the belt even look like it is under load! Clearly this generator makes so much power that it barely even works in this vid.

[@francescomarchi5193]

also my father, Luke Skywalker, can do this

[@DennisMilesEVprofessor]

SPAM, SPAM, AND MORE SPAM. wOULD THE "SNAKE OIL MERCHANTS "CRAW BACK INTO THE HOLE YOU CRAWLED OUT OF !

[@jimknox6094]

Was just reading the comments regarding this generator, first, i think he used bent drill bit to show it was really turning. I'm not to sure about this myself, as someone rightly said you cant get more energy out than you put in, I dont think there was a hidden wire when he removed mains plug ,if it was running on its own, there was no load to slow it down so it would have stopped eventually due to resistanses in motor, altenator. Someone suggested gearing altenator to drive motor faster that would add more resistance, another suggestion was larger pulley on alternator smaller one on motor, also if the motor is domestic mains (usa voltage) the altenator is 3,000 watts a lot of power you would think it would run the motor with no effort perhaps for a short time, the main problem here would be the faster the altenater was turning the higher the magnetic field build up between rotor stator so more resistance to hold motor back,would'nt the problem be the same whether it was a magnet rotor, or one that required exciter current? would welcome comments on this. please.

[@jimrojas62]

You can easily build one yourself. I suggest you use a 1 HP 3 phase motor controlled by a VFD. This will give you better overall control over the entire system. For your generator head, I suggest you use a 10kw permanent magnet unit. This is available from Northern Tools, The VFD will consume a steady 500 watts. I do however suggest you use a 100 lb flywheel to offset the drag of pulling power from the generator. This will give you about 5000 watts of useable power.

[@royzen2]

I always suspected this was possible but never got around to building one of these. Can't wait to give it a shot.

[@claudiagamino6499]

Could you please explain how you modified the generator to produce so much energy. Thanks for the info

[@superglue46]

Neat! I'm glad someone finally figured out a way to circumvent the laws of physics!

[@jimjones395]

I did something similar years ago with a car battery, starter, and alternator to run 12v lights and keep the battery charged. All I had to do was flip a switch and the lights came on in a barn shop. Bright lights too...car headlights. Its a great setup for hunting cabins or camping. And with a 12v/110v converter you can run low energy 110v appliances like small refrigerators or a tv...

[@margiepaolter1517]

Awesome video. thank you for sharing. Where do you purchase the generator?

[@DarkwolfA17]

0:17 "Did you know that people with guilty consciences are more easily startled by loud noises-"

[@nowayjose20]

Have you tried starting it by hand? You should build a lever and gearset hand starter for it.

[@eastendbillythekid802]

Well done man I've been saying this for years but you built it showing my theory works thanks !

[@miniTVortex]

Can you make a series of videos showing the steps you use to modify the components to make this a complete working power system?

[@kimobrien.]

Look I can't do that or I would be giving away my hidden wiring.

[@robbygee2539]

I thought of this concept as a kid and it is great to see it in action.

[@hook3763]

I have a 7000W cont./ 10,000W peak gen head and a motor to do set up. Have caps and other items. The gen head is modified sine wave. I do have a 5000W pure sine wave gen head with which I can then do a grid tie or just tie to my home panel. I'm trying to figur out the special modification you made to make the motor run more efficiently on the more pure sine wave instead of the surging modified sine wave. Thank you.

[@je19662008]

I can only think of one problem with this; the excessive heat that will be created by both the generator and motor. If you plan to build larger units of this type to power entire homes & commercial properties, you will need to set up some kind of cooling system, preferably a hydraulic one. But other than that, it looks perfect.

[@acopiagc5114]

Great I like whats you have done, can you use a larger generator to create power for more appliances???

[@yonasbehonegn2507]

Dear TheWorldSolutions, I am writing to primarily thank you for coming forth with this invention. It is my honest opinion that this is a technological step that might change the face of modern life as we know it. This could be the solution for the world's energy crises and could do away with the expenses we keep forgoing.Aside from this the climate change problems that energy emission keeps causing in all fronts could also be a thing of the past. Your invention renders huge hydroelectric dams, nuclear power plants and gas generators obsolete. I understand that this is an ambitious invention and only a fist attempt but despite the negative feedback you might garner because you've introduced this to the public, I urge you to move forward and keep spreading the word. I hope that you'll come across fellow comrades that will make it their mission to get this phenomena up and running. Change is always a scary thing especially when it threatens the benefits of the already wealthy. Good luck to you and keep up the good job.

[@Hanna-vm1yq]

Yonas Behonegn Dear TheWorldSolutions, I am writing to primarily thank you for coming forth with this invention. It is my honest opinion that this is a technological step that might change the face of modern life as we know it. This could be the solution for the world's energy crises and could do away with the expenses we keep forgoing.Aside from this the climate change problems that energy emission keeps causing in all fronts could also be a thing of the past. Your invention renders huge hydroelectric dams, nuclear power plants and gas generators obsolete. I understand that this is an ambitious invention and only a fist attempt but despite the negative feedback you might garner because you've introduced this to the public, I urge you to move forward and keep spreading the word. I hope that you'll come across fellow comrades that will make it their mission to get this phenomena up and running. Change is always a scary thing especially when it threatens the benefits of the already wealthy. Good luck to you and keep up the good job.

[@TheWorldSolutions]

FREE CLASSES! After you study the free classes on the website, THEN AND ONLY THEN, send us a email. witts.ws contact us page. Sorry it took one year to get back with you. We get 500 emails a day, and there is no way we can keep up.

[@superargo4701]

No detailed explanation of how the generator was modified. An amusing and entertaining presentation.

[@fordtough68]

I've honestly pondered this EXACT same scenario since I was a young boy and learned what an alternator on a car was.....this could be awesome in the future!!!

[@hardcore4280]

i understand the concept perfectly..its ingeneous YES.... but my question is, what was the modification on the generator?

[@ibrahimomar20]

I have the same idea but what about losing power? Do you using some gears for that .. great job

[@stevenblackwell1093]

Ok so, if i understand this correctly, the reason this would work is the same reason that your car gets better gas mileage at highway speeds rather than in stop-n-go traffic: F=m*a, (force = mass x accelration). So if there is movement but zero positive acceleration (i.e. if you were travelling highways speeds not stopping or accelerating), then: force = mass. Therefore if a generator/motor combo was ALREADY running, then it would require less energy than if it had to get up to speed from a stop, and as a result there would be leftover energy from the generator to power other stuff. that sounds right but i dont know for sure, its has been a while since hich school.

[@joemacdonald6312]

So this possible protracted device works by having a system that runs at a constant level of energy and can take a certain amount of load before stopping completely? The reason I say that it's a "possible" protracted device is because its components would eventually break down over a certain amount of time due to wear much like with today's gas generator, however, the gas running the generator would be exhausted before the break down of its components.

[@Omastian]

What modifications were made to the coils on the generator?

[@dennisferdig8135]

I thought about doing just what u did, but what deterred me was the basic rule that "energy can not be created nor destroyed, only transformed. I thought that rule made something what u did impossible. I guess I don't understand the rule. Bravo, my hat's of to u.

[@chriswilks1046]

I've been designing for a self generating motor over this whole month and then I seen this in my recommended thing and I have a design really similar.This sucks I thought I made a new design. Well mine is different because I think it could produce a more better source of energy. But nice simple build.

[@megacab109]

Would you be able to over-drive the unit? Put a pulley slightly larger on the motor, and a pulley half its size on the generator? It could lessen the power draw or create an excess of power

At the age of ten i was planning such device but sooner it found out that it is impossible to run forever. There are just coils that turns induction into movement. With that movement the construction looses power with heat. Then you translate the movement back into induction. This also contains a large amount of loss of energy. Why don't you just connect two tranformers in series but that will not work for a long time even with a large capacitor connected into the circuit.

[@colc4044]

Of course it works, using electricity to produce electricity, simple. For laymen, another way of doing it would be... fit a large belt wheel on the motor and a small wheel on the generator and Bob's your uncle. You get out more than you put in. For those who think the laws of physics can't be broken, I am sure they would be the same people back in the day who were saying the world is flat and the sound barrier/wall can't be broke and man will never walk on the moon, etc. And I believe scientists have found particles deep under ground that could only have got there if they traveled faster than light which we are told can't be broken i.e. the faster than light barrier. Electric cars are all ready using their brakes to recharge batteries and it is only a matter of time before they figure out to hook up the wheels to generators to recharge the batteries. Hydro electric dams pump water back up hill to use again via electricity and wind turbines are going to... in the near future use spare capacity to compress air into large tanks to use to turn generators to produce electricity when the wind does not blow, that's free perpetual energy. And where did the oil, gas, coal, wood, sun, etc come from. We have just landed a space craft on an asteroid to see where we came from. It is believed microbes came in on a comet and sparked life... so microbes put in a microscopic amount of life and produced billions of complex life and us and we are now going back out there to find out where we came from - which is perpetual motion in every day use, get more out than you put in... just look in the mirror to witness the living proof, we only exist due to perpetual motion but that is just my opinion... 1/1/15

[@derpsauce719]

Haters gunna hate hate hate hate.. They will never listen.. WAH WAH WAH IT CANT BE DONE... Yeah.. tell us something "can't" be done .. *This comment written on a laptop powered by free energy. suck on that!*

[@jmowreader]

TheOriginalSyonix Plugging your laptop into the wall outlet at Starbucks doesn't count.

[@jmowreader]

No, actually you don't get out more than you put in - you never do. There is a very long formula they use to calculate the amount of power there is at each end of a two-pulley belt drive. If you're building a machine that needs X amount of power at Y RPM and you know your motor turns Z RPM, you can determine your pulley sizes and motor HP requirements pretty easily. We'll throw out two numbers: our motor produces 1 HP and it turns 1000 RPM. (I don't feel like doing complex math tonight, 'kay?) Every time my motor makes a revolution, it will produce 1 horsepower. If I put a pulley the same circumference on both the motor and the load, the load will have 1 horsepower applied to it every time the motor turns, and the motor and load will turn the same speed. Cool so far? If I put a pulley half the circumference of the motor pulley on the load, it'll turn twice as fast but there'll be half the power on the load. If I go the other way, the load will turn half as fast but there will be twice the power on the load. If you want to see this in real life, get a 10-speed bike. Shift the back to the lowest gear (the one with the most teeth) and take off. Then shift into high, stop, wait a couple seconds and take off again. It'll be harder to take off in high gear because the bike needs the same amount of power to move, but the gear requires more power from your legs to turn it.

[@colc4044]

Jim Mowreader I now have a sore head... I will take your word for it. Perhaps the line in the Matrix film "ignorance is bliss" is quite apt. Bolivia has half the world's supply of lithium to make batteries for our portable energy needs and the sun to charge those batteries... perpetual motion perhaps...

[@jmowreader]

stormislay If you're using solar, wind, wave or some other form of what the cool kids call "renewable energy," you're out of the realm of perpetual motion. Solar works. Photovoltaic is presently expensive to install but that's a one-time cost, assuming some external force - hurricanes, trees falling on them, too much snow - doesn't damage your panels. If you combine a large solar array - think "75 to 90 percent of the southern side of your roof" - with a wind turbine, batteries and inverter to store the power for later use, and maybe a 5kw diesel generator just in case the wind doesn't blow and your panels are covered in snow, you'd have a good balanced off-grid power supply for your home. If you had a large-enough home to fit both of these, maybe cover half the roof with photovoltaic and half with solar heat collectors with rock-bed storage to keep you warm in winter. Or put up a big shed to hold the PV panels and cover your house's roof with heat collectors. Stick with things proven to work.

[@tineshnarkhede6321]

amazing video, can you send connection diagram and ratting of the motor and the generator

[@D347H2]

I really have no idea how to build one of these, but this is pretty damn awesome.

[@SteveLindsayhumain]

Hello. great demonstration. This is the exact technology that needs to be disbursed globally to save and encourage humanity to help each other rather than capitalize on the need for this. I'd like to see a video on any modifications to the motors/generators that you use in this demonstration as would we all. Can you provide a link for rewiring or wiring this unit. Thanks again for showing us what you have. I look forward to more on this conversion.

[@TheAZchambers]

me and my uncle built a setup kind of like this with 1 motor and 2 generators 1 generator powered the motor the other plugged into the workbench worked great for a long time

[@tgreening]

So you use the wall plug to start the motor, which runs the generator? Then you shut off the wall power and the generator runs the motor, which powers the generator, which runs the motor? And the generator has enough left over to run the grinder and/or drill press?

[@ROBERTHOCKER]

I created a P.E.S. [perpetual energy system ] in the 1980's. It consists of a run/start capacitor, a 12 volt motor and an alternator or generator. When the system turns on by the run/start capacitor, the alternator or generator send electrical current to a breaker box. The breaker box sends a wire back to a switch the run/start capacitor is on; and powers itself; as well as supplies almost 275 amperes current for powering an entire home....

[@temphiscrownmusic7283]

I built this unit 20 years ago I also used step up transformer's and a fly wheel as a counter weight to offset loads. Have fun trying to get a patent on it.... This application could replace solar panels just emit the energy direct to batteries or maybe even by pass batteries with the right transformer.

[@RichPB007]

Sounds interesting, are you able to say how you modified the generator to produce more power than the motor? In my normal understanding, what you propose is impossible, motors and generators are inefficient devices - friction losses, heating losses, even the drive belt produces loss. Where does this energy come from once the set is running?

[@defenderred1212]

Think you could include a circuit diagram in this video? Also, have you connected any measurement devices to get some idea about what is going on? Voltage, current, RPM gauge? Is the motor RPM dropping when you turn on your grinder and drill press?

[@MottyGlix]

This is called a Perpetual Motion Machine of the First Kind, because it breaks the First law of thermodynamics. If it could work, it would have been marketed decades ago, since such PM machines began appearing in the late 1800's. Incidentally, from the visible belt tensions and rotation of the belt wheels, it looks as if the "generator" is belt-driving the motor, instead of the other way around.

[@DaRealFacts1]

And to think I had this idea 45 years ago and stopped when I went to shool for electricity. They said you can never create power this way as there is always loss. What generator motor are you using and has it been modified? I would appreciate the motor specs, company and pricing. Thx Has anybody looked at the Bloom Box or Joes cell? Both are amazing

[@EvilOverlord96]

you are right. Energy is only conserved in an isolated system. In this setup, energy leaves the system put none enters it. So it doesn't work. Of course, we are surrounded by energy, most of it is just temperature (every temperature above 0K is energy). But if you want to use energy, you have to have an energy gradient (e.g. high temperature/low temperature ->can be used with peltier effect, high spacial position/low spacial position -> can be used in water power plants...). You just have no idea of 17th century physics...

[@SINCLAIRRESEARCH]

the laws of physics can be broken!!! energy companies love the way schools tell kids this crap that laws of physics cant be broken ......if you can think of it it can be done ....hell some dickheads really believed the world was flat!!!!! ive always said that if you have a good idea,,,go with it no matter how crazy cos many great inventers have been callled crazy

[@brucestrnad4305]

I had a business of metal fabrication, electronics, and machining and I can't begin to tell you of all the inventors I worked with. Most of them had wonderful hopes they were going to be millionaires.....NOT happening. One of the gentlemen made a toilet paper dispenser that he got a patent for.There is the element of gravity and friction that is not accounted for and some may work for a while sustaining their momentum but eventually scumming to the forces of gravity or friction. Wind, solar and gravitational pull have the ability to sustain and produce energy, not a cat chasing its tail.

[@JesseChoupique]

This is absolutely hilarious. I like the comments about doing it on a commercial scale.!!

[@mnp3gtr]

i like your thinking and have a serious question the generator has been improved 200 times its output? is that 200 x 3000 watts =600000 watts

[@sumabriz]

if you'll use this for home application how long can you run this thing and how long will it last to provide free electricity ....I wanna know the safety in its application as well.

[@happylockbox2626]

What did you do to modify the generator?Also,as for long term have you tested this system ?How long will it run before something burns up.I see no cooling system to help cool anything down.Regardless,if all you say is true I must say fantastic!

[@pushkarraj6297]

Amazing concept.. thanks a lot.. I have one question. how much watts of motor would be needed to run the 3000 watts generator ? I mean suppose I want to make a 5 KVA generator, then how much watts of motor will be needed...? I will be very thankful to you..

[@rlmccullough]

Could you use a 12 volt or 24 volt battery with a inverter to get the generator?

[@TheWorldSolutions]

yes. see classes, witts.ws

[@mahmoudlover1]

This is a great idea, but I have a question, if I need a 6000-watt, what is the capacity of the generator, and what are the power motor hp

[@Sheldonc88]

"Once you get the cycle started" by an outside source of power and once the generator is spun up to correct RPM, then the generator will produce the energy that it was designed to do. In this case, if its a 3KW generator running a 500 watt motor to spin itself then your surplus of energy is 2500 Functional watts. Once you shut the cycle off, then you again need an outside source of power to restart it.

[@ThorntonsWelding]

The best part is it's WHISPER FUCKING QUIET!!!!