Alter Schwede... Definitiv kein leichtes Schloss! Respekt!
@LockpickingNord7 жыл бұрын
Bearded Bushcraft danke dir! Ist echt übel das Teil. Habe häufig nach 30 min. aufgegeben! Aber zu empfehlen 😁 lg Julian
@nitromaroder4 жыл бұрын
An sich eigentlich, super einfach - wenn man das so betrachtet, wie Du es machst. In Wirklichkeit - unglaublich, wie viel Wissen und praktische Erfahrung Du haben musst! Respekt, hat Spaß gemacht Dein(e) Video(s) anzuschauen!
@fragezeichenkanal3 жыл бұрын
Meine Eltern hatten das gleiche Schloss, ich habe auch noch einen Schlüssel hier liegen. Die Kugel kann man rausdrücken und wieder einsetzen. Ich hatte gedacht, dass es nahezu unmöglich sei dies zu picken. Jedenfalls ohne speziell für das Schloss angefertigtes Werkzeug. Respekt
@klausreifschneider27464 жыл бұрын
In 6 Minuten und 5 Sekunden - Rekordverdäctig! :-) Hätte gerne noch den zusammenbau gesehen.
@Potti3147 жыл бұрын
Großartige Leistung dieses Monster zu picken und natürlich auch den Pinsalat wieder zu sortieren. Ziemlich cooles Schloss.
@LockpickingNord7 жыл бұрын
Potti314 Danke Michael!😊 du weißt ja ungefähr wie lange ich damit schon kämpfe! zuerst die probleme beim spannen und später die vielen Fehlversuche! Ich hatte es schon etwas länger nichtmehr versucht und dann auf einmal...Offen...ich war so erstaunt das ich das zerlegen total vergeigt habe 😁 naja auf zu neuen Herausforderungen! "MulTLock interactive"🙈😉
@Osmar19796 жыл бұрын
*Zylinder
@J0nnyFavourite5 жыл бұрын
Bin mit Bohrmuldenschlössern auf dem Kriegsfuß, kann Deine Begeisterung über die gelungene Öffnung nachvollziehen! :-) Super Video!
@lockingpaul7 жыл бұрын
wow man awesome picking on this lock . pretty scary needle pins and regulars on a dimple insane! also i love your pick and your pinning tray is very nice! thanks for showing. have a good day
@LockpickingNord7 жыл бұрын
locking paul hey and Thank you very much! The IX10 was a real nightmare and I am glad to close this chapter! The tray now belongs to Boris Kozo! 😉 Greetings from cold old NorthernGermany
@lockingpaul7 жыл бұрын
awesome it is also cold here. and also cheers from the cold northern ontario canada.
@lockingpaul7 жыл бұрын
also i wish i could understand you unfortunately i only know cuss words in german. but ya sounds cool!
@devoidflow7 жыл бұрын
Bin erst vor kurzem auf diese Lock Picking-Thematik auf KZbin gestoßen und finde das total interessant. Mich würde interessieren, wie dieser Kopierschutz von DOM genau funktioniert.
@LockpickingNord7 жыл бұрын
Rohlinge für viele hochwertige Schlösser sind patentgeschützt um unrechtmäßige Kopien zu verhindern. Mit der zunehmenden Verbreitung von 3D Druckern und deren Leistungsfähigkeit wird das aber immer unwichtiger. Das bewegliche Teil am Ende verhindert, dass man den Schlüssel einfach abfotografieren und im 3D Drucker nachbauen kann.
@TallanPick6 жыл бұрын
Great picking buddy, that is not an easy lock. For taking apart that lock you have to use the small followers of the kit, put in them througt the space of the cam. You have to pull out a little both of the plugs, take out the cam, and introduce the small followers in, and push with them the plug out. Thanks for sharing ;o))
@RookieLock7 жыл бұрын
Wow, what a beautiful lock! You guys have some neat stuff! great work, keep it up!
@LockpickingNord7 жыл бұрын
Rookie Lock Thanks buddy! It was a good feeling to open the lock! I had many failed attempts before!😊
@DonzLockz7 жыл бұрын
Beautiful lock and great picking!✌ You sometimes speak a bit fast so it can be hard to read but I really enjoyed it all. I don't know of I'd ever be able to do that!👍🙃
@stromi90327 жыл бұрын
Best cutting up ever !!! Und das mit nur 2 Händen Und was zum puzzeln ^^ Cooles vid, ich schrieb dir morgen mal ne Mail Keep going !
@LockpickingNord7 жыл бұрын
Stromi 90 Ha😀 danke Ramon! War echt ziemlich knifflig die Geschichte. Hatte durch die zwei pin Reihen leider nicht die Möglichkeit es von vorne zu zerlegen.😉 Aber Ende gut alles gut! lg
@paulcrosdale91257 жыл бұрын
Fantastic 👏👏👏 a really hard lock to pick&gut! bravo! 👌👍👍
@LockpickingNord7 жыл бұрын
Paul Crosdale Thank you! for me it was a hard fight, but also a lot of fun!😊👍
@theavidpicker27217 жыл бұрын
Very nice picking bud! I bet it was difficult to sort through all of the pins but you totally saved it and the rest of the video is great! Actually, the entire video was great because I have done the same thing on multiple occasions. Keep on picking!
@LockpickingNord7 жыл бұрын
TheAvidPicker 1 thanks buddy! glad you like it! It was very tricky but in the end everything was fine then😊👍
@tobiasgehret44293 жыл бұрын
Wow echt super ist echt super erklärt
@rjperkins3657 жыл бұрын
Awesome lock, another DOM for me to track down. Lockpicking Lawyer gave me his DOM ix10. It was just the 10pins wasn't that bad till I got a pick stuck in it. I sent it to West Coast Picks. Still haven't gotten the DOM system D open yet.
@LockpickingNord7 жыл бұрын
Randy Perkins Thanks buddy! I often hooked/stuck my pick in it and almost never get out! That's why I picked with different flags from different angles, only so did it work! LPL's ix10 was something different as far as I could see! It would be great to have a Dom System D! ☺👍👍Greetings from Germany
@rjperkins3657 жыл бұрын
T&J's Lockpicking Nord oh and the gutting. I just went through that with a E*S MG 15pin same thing as a Keso, but I ruined 3 springs.
@LockpickingNord7 жыл бұрын
Randy Perkins haha a few days ago i have picked a keso lock and while gutting i broke also 3 springs😃, the core had twisted as I removed the safety ring(with a saw)😊 and the driver of the one shear line jumped into the holes of the passive pins! Big big Problem...but thats life! 😁👍
@Steel-Pinnings7 жыл бұрын
This is awesome bud, I have this lock in a mortise cylinder on its way to me. So quite the perfect video to see what to expect. lol
@LockpickingNord7 жыл бұрын
Steel Pinnings Thanks buddy! Is your IX10 already arrived?😉
@Steel-Pinnings7 жыл бұрын
T&J's Lockpicking Nord yeah I got two of them... And they are gorgeous to put it lightly. Just another work of art.
@MultiVde7 жыл бұрын
Super! Ein tolles pick!
@LockpickingNord7 жыл бұрын
vde danke dir! Ist echt ein interessantes Schloß! Leider sehr kompliziert und zeitaufwändig der Pick!😉
@LockpickingNord7 жыл бұрын
vde Thank you for watching! It's a very interesting lock, unfortunately very complicated and time consuming!😉
@MultiVde7 жыл бұрын
Das Ich kann mir vorstellen :) Ich habe auch einen und seit Monate habe ich nur angst, vielleicht es ist jetzt endlich Zeit noch ein Versuch zu machen :P
@LockpickingNord7 жыл бұрын
vde ja so ging es mir auch! Habe lange die Finger davon gelassen!😊 viel Glück
@deronchopathe37917 жыл бұрын
Great picking and great lock! I only tested the Dom IX 6 KG which I found already very difficult, so bravo. :)
@LockpickingNord7 жыл бұрын
de Ronchopathe Merci! It was a big fight for me☺ greetings
@themadhatter47617 жыл бұрын
Great pick, thanks for the video. 👍👍
@LockpickingNord7 жыл бұрын
The Madhatter Thanks for watching!😊
@Stuffz5112 жыл бұрын
Wahnsinn wie du dass geschafft hasst 😎. Möchte gerne mit dem lockpicking anfangen, dass Dom was du geöffnet hattest waren dass gekaufte Werkzeuge oder zt. Selber gemacht? Diese flags, links rechts usw. Gibt's die auch von multipick? Mfg
@wortspiel51834 жыл бұрын
habt ihr ein video in dem ihr erklärt was aktive und passive pins sind?
@stephanspindler67756 жыл бұрын
Super Leistung.
@Leonslockpad7 жыл бұрын
great picking buddy cool lock😎😎👍😊👍
@LockpickingNord7 жыл бұрын
Leon's lockpad Thanks buddy! glad you like it...although it took a long time! ....And the not very professional disassemble😁👍
@RuneInternational7 жыл бұрын
it is so great to watch videos with actual security right from the factory. to reassemble, you need to pull both sides a little out, to remove the activator. then use the 3 small discs from your kit to pin up and pull them out one by one in the middle as the plug goes in. Then insert activator and push both cores all the way in.
@LockpickingNord7 жыл бұрын
Rune International Thanks buddy, that was the only way to get this beast together! it was a real challenge for me and after the happy opening my brain was no longer able to think logically 😉greetings Julian
@edwardlechner9736 жыл бұрын
Super pick gratuliere, woher bekommt man das Brett wo man die Stifte sortieren kann.
@Draconia1114 жыл бұрын
Glaube das haben die selbst gefräst. Sollte es aber auch sicher irgendwo zu kaufen geben
@hoffmanw1572 жыл бұрын
Wie wäre es denn mit einem BKS Janus Serie 46 ?
@jansteini96125 жыл бұрын
Left Flag, Right Flag ? Picke erst seit kurzen, aber wenn man eine Left Flag umdreht, hat man doch ne Right Flag, oder ? Kann das jemand erklären? Grandioser Pick übrigens!
@richigogo7165 жыл бұрын
Nein. Guck sie dir genau an. Die sind versetzt.
@thumperlockpicking92694 жыл бұрын
Well done
@CmX95HD7 жыл бұрын
Könnt ihr mal ein abus bravus 4000 zerlegen ?
@LockpickingNord7 жыл бұрын
Leider haben wir keins, sonst gerne. Hast du BosnianBill's Video zum Bravus 4000 (kzbin.info/www/bejne/Y6fTfKprdtGiZqs) gesehen? Vielleicht hilft dir das ja schon weiter... :-)
@Greif7525 жыл бұрын
Wie heist die "Flexible Klemmhalterung" die der Herr KZbinr nutzt ? ich suche so eine :)
@richigogo7165 жыл бұрын
Schraubstock
@ricogroot70286 жыл бұрын
Hi, hat der Dom auch einen Not Zweiten 3x schlüssel Satz?
@LockpickingNord6 жыл бұрын
Rico Rudnik die meisten in ovp die wir besitzen haben 4-6 Schlüssel! Lg
@ricogroot70286 жыл бұрын
Hi, hat er auch einen schützt von ausbohren der Schließzylinder von Dom?
@LockpickingNord6 жыл бұрын
Rico Rudnik moin! Ja das schloss hat gehärtete stahl Stifte die ein aufbohren verhindern. Kann man bei min 16:45 gut sehen sowohl der Kern als auch die Pins sind mit diesen Pins verstärkt. Lg
@ricogroot70286 жыл бұрын
Hey, ich interessiere mich für das Angebot bei Ebay www.ebay.de/itm/Dom-IX-10KG-Zylinderschloss-Profilzylinder-schlieszylinder-30-35-kein-Keso-Evva/263513939977?hash=item3d5aa7a009:g:o44AAOSw5M9akBcy und auf dem letzten Bild siecht man das Zylinderschloß aber ich sehe nicht wo die Sicherheit stifte rein geschoben würden? "wegen ausbohren die ganz vorne sind am zylinder" habe noch einen von Abus xp2s und da sieht man die deutlich.
@LockpickingNord6 жыл бұрын
Rico Rudnik nicht bei jedem Hersteller werden die Drill Protect pins von außen eingesetzt. Wenn es ein IX 10kg ist sind sowohl Kern als auch Gehäuse mit diesen Stiften ausgestattet. Zusätzlich sind noch einige der keypins und driver Pins aufgebohrt und mit harten stahl stiften ausgefüllt. Hinzu kommen die passiven Pins und Kugellager die ebenfalls aus gehärtetem stahl sind. Wenn man bei Google ix10kg eingiebt und auf Bilder suche geht wird man einige Grafiken dazu finden. Ich denke mehr Schutz wäre nicht möglich. LG
@berndthiel6137 жыл бұрын
..................astrein ,.............geht mich ja nichts an , aber warum so viele britische Kommentare? Ist es dort noch beliebter als hier ?
@LockpickingNord7 жыл бұрын
Bernd Thiel Danke! ja die Deutsche Community bei KZbin ist nicht so groß wie die Britisch, kanadisch und Amerikanische! sind aber alles feine Leute!!👍😊 LG
@okko166 жыл бұрын
Die weltweite Einbrecher-Community hat hier ihren Helden gefunden.
@xxletsplaygamexx28266 жыл бұрын
Darf ich den dom zylinder ausleihen
@whatever57976 жыл бұрын
oh dude you're cool! I'm struggling to pick this crap...
@LockpickingNord6 жыл бұрын
Hi, what ever. It took quite a few hours to get there. Picking it is one of our greatest achievements. I'm sure you too, will pick it eventually! 😀
@whatever57976 жыл бұрын
tbh I want to cut it into pieces once I find the good blank))) and then the fun will begin, haven't yet made keys for anything that secure
@douro207 жыл бұрын
From mid-90s?
@LockpickingNord7 жыл бұрын
We got it second hand on ebay. We don't have a clue how old it is, actually. :-)
@bernhardschwarz19985 жыл бұрын
Da beißt die Maus die Eisenstange schneller durch.
@Basis211nsl5 жыл бұрын
Naja, das BKS Janus 46 in unter 2 Minuten gepickt, genauso wie das DOM Diamant und das DOM ix TwinStar in unter 4 Minuten, alles hier, bei KZbin, zu sehen. Wirklich sicher ist wohl kein Schließzylinder!?
@P.E.S.3902 жыл бұрын
Ci hai messo troppo, io avrei ricominciato. Comunque sempre meglio cominciare da quello in fondo.
@d1onysus5 жыл бұрын
What kind of magic picks are these?? *confused Dragonborn noises*
@breathe4624 жыл бұрын
recht schnell? schau dir mal paar videos von LockPickingLawyer an der knackt die schlösser schnell und der lässt sich noch zeit dabei^^ gegen den siehst du aus wie ein anfänger :D kzbin.info/www/bejne/jZCcqZ-cmMSIhq8
@Silbergulden6 жыл бұрын
Ein Elektro-Picker ist vermutlich bei Bohnrmuldenschlößer wirkungslos oder ?
@Draconia1114 жыл бұрын
Ja. Wie willst du das ding da reinstecken? xD
@d.dieter60366 жыл бұрын
Jungs bitte knackt mal einen Anker 3800 .... ich weiss ihr Schaft das !!!
@LockpickingNord6 жыл бұрын
Anker 3800. Wenn wir eins hätten, könnten wir überlegen wie man das picken könnte. Aber die sind uns leider noch nicht über den Weg gelaufen. Magnete in Schlössern sind auch grundsätzlich ziemlich fies, das ist schon ein 1A Sicherheitsfeature... :-)
@Osmar19796 жыл бұрын
Zylinder, nicht Schloß
@LockpickingNord6 жыл бұрын
Das stimmt allerdings. Wir haben es leider nicht immer so mit der Terminologie. Obwohl wir uns Mühe geben. Das mit dem Schloss wird uns wohl noch öfters passieren. 😳 Ich versuche aber in Zukunft dran zu denken! Gruß T