Align 3gx full setup video 4 (freddy can fly)

[@frook28]

Freddy! Just wanted to say thank you for all the videos. There is no way I could of setup my 450 pro v2 without these videos. You made my first build very easy and fun. Thanks!

[@garyfuzie1170]

Awesome Video series. Just got back into helis after years of not. So flybarless is new to me. This is by far the best instruction i have seen. WOW great job. I happen to be using a 3gx on a trex550. So this was perfect.

[@33forsaken]

I am so happy to hear, I have not used this system for many years now lol however if its working then fly on and fly safe :)

[@OndaEyes]

Freddy, your timing is perfect :-) Just finished building my 550 EFL and was struggling with the DX8 setup (this is my first FBL) and your videos helped enormously!! Now on to the rudder setup ...

[@truem0bile]

Hey Freddy, you make the best videos for flybarless setups! I am using the same concepts for adjusting my flybarless head on another system too! Thanks, your videos have helped heaps!!

[@quicknickk]

Hey Freddy. A big thank you for all your helpful Vids. From South Africa. Port elizabeth. Nick

[@1980pitts]

Hi mate, fantastic videos, just bought a 450 dfc with goblin style body! gonna setup 3gx tonight. Mark from the Isle of wight UK.

[@jimhanson6265]

Hey Freddy just wanted to say thanks I watched all 4 of your videos and the 2 gyro setup vids easy to understand even with futaba tx ...you rock thanks buddy :)

[@mrojas6869]

Freddy, without your help my T800 would still be sitting waiting for me to get my nerves altogether to ditch into the unknown, thanks man, keep up with your good work, best regards.

[@lukaszpiotrowski1584]

Thank You for all your help with settings for RC Helicopters

[@AndoAus1]

Hi mate, firstly frigging AWESOME setup videos. Even I can follow them! lol. Thanks a tonne for making them, you've done great.

[@lynnzi3d]

the build manual shows you how to go through these endpoint settings, BUT the 3gx align defaults are already set for proper flight on their FBL and DFC head. This can be looked at better running the 3GX program/linked. You don't need to mess with it. After getting a feel of the new system/heli you can tweak the other settings, but endpoints are not needing messing with (could cause extra servo stress or binding if over set.

[@jdm201010]

Hey there freddy I have been watching your videos for awhile what would you suggest for gov would you use it or no for 3d and do you have any videos of of maybe how to go about setting it up for gov thanks let me know

[@jrb8081]

Great video's.

[@33forsaken]

Thank you :)

[@aircrow50]

This is a GREAT video on how to set up the 3GX. I've watched quite a few and no one goes as detailed and straight forward as you do here. Thanks!! Is their any way to make a video on how each setting effects the heli. Basically for people like me that could use it spelled out for dummies. It's hard to know what you're looking for in flight caractoristics.

[@katzmeownet]

Freddy, This is great, you probably kept me from having an anxiety attack.

[@MikeS1944]

Freddy, Thanks very much for 4 great videos on the 3GX. But you left me hanging after part 4. Will you be doing more videos to complete the setup for the 3GX? Again great work. Even a newbie like myself was able to understand exactly what you were doing!!!!!

[@daviddwp1ify]

Very nice job thank you so much I have learned a lot from you

[@randall8686]

This is perfect thank you but why no video on the tail setup?

[@TonyCelliers]

Hey Freddy, great vid, thanks. Where can we get part 5 for the tail setup? thanks

[@flfelicio]

Hi Freddy, this great vídeo, but I have a question. Could you make a vídeo of setup End Point 3GX, because after that (vídeo 4), we need to do the setup, end point elevator and aileron. thank you so much

[@GregButterworth]

Freddy, Great videos and really appreciated....i think i am mastering the mechanical side and sort of get it but have managed to total a 250DFC for the 4th time... about to ditch the 3GX for and AR7200 but i know it should work...do you have any setup tips/videos for the setup and gain values for each side of the 3GX that would tame my beast of a heli....the collective is just unbelievably fast and uncontrollable even on +/- 11 so it slams into the deck and is just too sensitive....every time it hits it explodes....

[@mikegreen5471]

Would you kindly comment on setting speed governor with 3GX V3. DIR including swash first? As well how to set up governor. Thanks.

[@thefriendsofmrgyro6361]

Great videos. Thank you. Would I need to do anything differently if I mount the 3GX with the G-arrow pointing towards the tail (servo wires toward the nose)? The unit will still be upside up.

[@rodrigodellorto1003]

Hi Freddy Thank you very much for your videos!!! I've got some questions for ya: Does it matter biding the Receiver Before setting up the transmitter? Every Change I do to the TX must I rebind to the RX? Does the Different types of RX need a different setup? (I've got Spektrum AR6100e I've seen a lot of setting with AR620 and the ones with satellites) The Software in the Dx6i is different in the the Dx8, could you help me out setting my Dx6i?

[@33forsaken]

yes i use one sat on 450-500 two for 550-700

[@mrojas6869]

Hi again Freddy, I have a question, what about throttle calibration and flight mode setting? are those necessary or is this setup in your videos (4 of them) enough?

[@33forsaken]

hey buddy yes i use a gov when ever possible, haveing a nice set head speed makes any heli run that much better. The align gov is pretty good i use it 9 out of 10 times lol. i have the align gov setup vid if u wish to take a look

[@GasCanZa]

Hey Freddy, what happened to the next video?

[@33forsaken]

The next video was the Align GP 780 gyro setup. Its just listed separate because its sold in the 3GX and also as a stand alone. Its on my channel :)

[@thunder231231]

great videos, helps me a lot, thanks, very good job

[@33forsaken]

gyro video is up look for align gp780 gyro in my vids

[@ELVERDEFPV]

Hi!!! I have a question...After do all the steps of the setup of 3GX... when do you setting finally the pitch curve? In normal or idle 1 or 2?? In DIR mode? or not? Thank you very much!!! ;)

[@33forsaken]

the calibration is for using the nitro gov, also the flight settings are user defined, those have to be adjust to your liking brotha

[@nigelthomas8150]

Freddy your tutorials are fantastic. Thanks for putting in the time. Down here in Australia I built a 450 with the 3GX gyro but when I move the aileron and elevator and then release the stick , the servo does not spring to neutral but just moves there slowly. The 3gx is controling this but I dont know how to fix it. If i go to DIR its fine but it comes back once out of programming menu. Any suggestions? Thanks again Nigel

[@nigelthomas8150]

All sorted

[@9mmjames]

with the 3gx do i need to buy 2 of the extended antennas? and i dont use the ar8000

[@Airwolf8157]

Thanks keep up the good work. .

[@TheSloppyDingo]

great video series... waiting for the gyro setup video!

[@otrosmd]

hi freddy. I have a t-rex 450 and a t-rex 550 with 3GX. How many degrees must be the collective pitch and cyclic pitch? thank you for all

[@33forsaken]

end points should all be +100 -100 for ail elev and pitch and rudder.

[@vher143]

Hi Freddy, can you give me an advice how to solve fishing on high speed, I have a 3GX V1.1 Thanks

[@TheRearWheelMan]

You are the man! Thanks

[@GottiRC]

Freddy man, how are you? I have a question regarding the 3GX V4. I have a Trex 550E PRO DFC and using the 3GX V4 with AR8000 satellite receiver with my DX7s. When im setting the pitch in DIR mode on the 3GX, I have 0 at mid stick and +12 on full pitch and -12 on negative full pitch. when im doing my swashmix to get 8 degrees on the AIL and ELEV I adjust that in my swashmix, and when I finish all the steps everything is fine expect I don't have 8 degrees anymore on the ail and elev but almost 13 and a half... which causes the elev to bind when im at full pitch with my collective stick all the way up. What do I need to do to correct this?

[@33forsaken]

no correctins needed. once out of dir your gyros are active so until the model is moving they will not counter the swash. thus the swash will move and bind out of the limits. If the model in not in flight and on the bench this is normal (as long as you did the dir as you specified in your message) you are ok its normal behavior

[@flfelicio]

Tks Man!!

[@LIQUIDXFX]

Is it possible to fly a 450 with one sat ?

[@33forsaken]

WOW thanks buddy that means a lot lol :)

[@33forsaken]

thats a decision for you to make. its all based on your flying style. i use + and - 12 for collective and + and - 10 for cyclic

[@LIQUIDXFX]

thanks man !

[@33forsaken]

fishing ??

[@alexandremagicmodelismo]

Aprendi tudo ,fi direitinho no meu trex 500

[@OctavioBarbozatavo]

Where's part 5

[@33forsaken]

hey buddy the seires is complete to finish ur set up just view my gp780 gyro setup and throttle and pitch curves

[@Extirpate326]

freddy help.. my cyclic servos are tilting the same direction as the heli

[@33forsaken]

revers the 3gx gyro settings for ail and elv as nessecery in the DIR menu

[@33forsaken]

align gp 780 (3gx) setup its in my videos buddy

[@lynnzi3d]

100+/- on tx ONLY not in 3gx setup.

[@33forsaken]

hey buddy u have the option to use a reciver with one sat, or 3gx and two sat s any questions feel free to call or tex me at 801-654-2803 thanks freddy