350 Small Block Chevy Tear Down! | Engine Grenaded TOTAL DESTRUCTION!!

350 Small Block Chevy Tear Down! | Engine Grenaded TOTAL DESTRUCTION!! | 1980 Chevrolet Corvette

Рет қаралды 622

Dive In Garage

Күн бұрын

Пікірлер: 20

@miketriesmotorsports6080 3 ай бұрын

J.B. Weld the cam together. It'll be fine.

@diveingarage 3 ай бұрын

Ha sounds like some fun science

@Louie.1 3 ай бұрын

Damn 😳😅 And I thought mine was bad when I popped off my heads

@miketriesmotorsports6080 3 ай бұрын

Here we go!

@EfrenIR 2 ай бұрын

Dude that’s a beautiful truck

@twinturbocoyoteftw 3 ай бұрын

I knew it was a crappy build when I saw the thermostat was glued in backwards.

@JunkieJesuss 3 ай бұрын

A fram on this beaut woulda checked out

@diveingarage 3 ай бұрын

I'm wondering if this happened due to an oiling issue

@shootermcgavin2819 2 ай бұрын

Crank bolt is snapped.

@dougj.8288 3 ай бұрын

That engine tried to self clearance for a stroker crank!

@diveingarage 3 ай бұрын

Ha I thought the same

@gregorylyon1004 3 ай бұрын

305 heads on a 350 engine block with a 283 crank ??? Who did this job ??? Joe Dirt ?? LOL

@diveingarage 3 ай бұрын

Its either a "use what you got" build, or they know something we dont!

@shootermcgavin2819 2 ай бұрын

Worst "circle track" engine I ever saw. The key to that type of racing is longevity and rpm. Some idiot put poor flowing heads and a Performer intake manifold on the engine thinking it will make any lick of power above 4000 rpm? No Wix oil filter. Used actual gaskets for the china walls instead of rtv. Careless

@T1544767 3 ай бұрын

I wonder if his push rods were too long?

@diveingarage 3 ай бұрын

Maybe. But that cam failure did this engine in

@theonewhowas7709 3 ай бұрын

somebody didnt know what they were doing nor looking for when they were putting that combo together.. likely just put it whatever fit and went with it

@diveingarage 3 ай бұрын

Sometimes you gotta use what you got I guess

@scottsquires6186 3 ай бұрын

Big dish piston is definitely not race car engine even with those heads

@diveingarage 3 ай бұрын

Remember the block looked like it was decked, who knows how much was removed maybe even from heads too. Plus those heads only have a 53cc chamber. Sounds like a decently high compression ratio to me. Also, dude told me he ran it in his dirt track racecar. Maybe this combo needed a dished piston?