This proves that not all vq engines sound bad, it just has to be done right
@Salim_shahidy2 жыл бұрын
A little trumpet-y (?) sound but it’s sounds aight imo
@yaseen-q509 ай бұрын
How are they holding up?
@georgenino90114 жыл бұрын
Sounds nice I like the combo 👍🏼 also if you’re in pomona, you might see my cousins artwork around town. He goes by angel once and he paints a pink elephant 😎
@Vq_Kev4 жыл бұрын
thanks and it sounded amazing👏 I'll keep an eye out for it
@nicholaswaskan87764 жыл бұрын
Funny it sounds just like my 350z , looks like a similar exhaust setup just not as many resonators
@Vq_Kev4 жыл бұрын
sounds different in person, but in my opinion resonators really help with just drone and rasp, but the exhaust will still be loud
@michaelparente28012 жыл бұрын
snap crackle pop pop pop
@joshuasutton40434 ай бұрын
Nice ride buddy love my z tomorrow she be ready to be uncovered kids getting me a spoiler
@DisturbedVette Жыл бұрын
Saving this video for when I get a 370z lmao I want an engine that rumbles low like a v8, and I want increase the rev limit so it screams high like a v12 :)
@kingofkickass13 жыл бұрын
They don’t make art pipes for g37x. This is a LOVELY alternative
@Vq_Kev3 жыл бұрын
🙏 was an amazing setup for sure you'd enjoy it
@xxoncorektsxx41793 жыл бұрын
@Cworksdesign is making a fabed up Art pipes for g37x coming this summer. Quality work
@alexandergarcia6588 Жыл бұрын
Isr long tube headers are must if you have a VQ sounds amazing 🔥
@kyori7k Жыл бұрын
No they are the cheapest for a reason. Many people say it has fitment issues, hence the price
@jacobturner3648Ай бұрын
Never had an issue with anything from isr. My long tubes from them fit perfect @@kyori7k
@Ghostdanr4 жыл бұрын
Waittttt a minute .. YOU STAY IN POMONA ?
@jamesnall5694 жыл бұрын
Yes he does
@melvinbrillo55984 жыл бұрын
I read you used to have art pipes before the isr lth. How big is the difference between the 2, sound and performance wise? Currently on artpipes but wanting the isr lth. Also have the shockwave. Thx
@Vq_Kev4 жыл бұрын
well let's see sound wise, its obviously louder cuz no resonators from the art pipes, in regards to performance it felt better. I wouldn't say its a drastic jump in power you'll only get that with boost. ur chasing minimal gains. Sound wise art pipes is best imo. isr longtime sounds good but its alot louder. I daily it with a tomei and I've been pulled over twice already lol. but its sound is amazing when ur on it. its manageable when I had the motordyne exhaust and longtubes. drone wasn't bad.
@johnososkalo47053 жыл бұрын
I really want to install these on my 6mt G37 Coupe, I currently have an Ark Grip exhaust so idk how the outcome would be. Hopefully similar to this but a little quieter as Ark is a quieter deeper exhaust
@Vq_Kev3 жыл бұрын
I'm not sure might be similar, cuz the motordyne has alot of resonators
@Vq_Kev3 жыл бұрын
the sound was amazing tho! tbh I miss this setup it was perfect imo
@johnososkalo47053 жыл бұрын
Did you wrap, ceramic coat or prep these in any way before installation?
@Vq_Kev3 жыл бұрын
I heat wrapped headers, it makes a difference and keeps the Temps down
@arturosegoviano68214 жыл бұрын
This was extremely helpful bro thanks buying my set tomorrow for my 370 nismo
@Vq_Kev4 жыл бұрын
glad I could help! would appreciate the sub✌
@arturosegoviano68214 жыл бұрын
I got you
@k1llerlunat1c782 жыл бұрын
Do these headers throw a cel on a 370z?? I’m in the market for LTH but I’m trying to avoid a cel
@Vq_Kev2 жыл бұрын
all test pipes, and longtube headers, will throw a CEL light. only way to correct it remove it is with a tune.
@RicondaRacing3 жыл бұрын
... and we say, BYE BYE! ... LMFAO!!!
@SnoopyRu19803 жыл бұрын
I went to Ralph's to get my test pipes installed on my Q50....I'm AWD but heard these header fit too...thinking about getting them 🤔
@Vq_Kev3 жыл бұрын
yea they are reputable shop 🤙 and maybe they will fit I think they just might have to move the studs around
@SnoopyRu19803 жыл бұрын
@@Vq_Kev yeah they are cool there, I'm gonna check and make sure they fit and get a quote from Ralph's on installation or go to my club shop in Pomona...ps you gotta new sub ✌🏾
@Vq_Kev3 жыл бұрын
@@SnoopyRu1980 yes they are cool guys, and hopefully it fits in your car 🚗 😁🤙 appreciate the sub fam
@k-a1473 жыл бұрын
4:29 sheeeeesh 💯💯💯
@preludeh22honda692 жыл бұрын
you cant cut and splice the o2 wires unless you use identical gauge wires
@Vq_Kev2 жыл бұрын
yes ideally same guage wires, but even then u want to be careful because those sensors readings are sensitive, it's best to just get extensions made from nisformance if you aren't confident in ur soddering skills
@MrEvoXI4 жыл бұрын
Sounds great
@mattrickles78233 жыл бұрын
Does anyone know what type 02 extension to use for 09 g37?
@vqveneno3 ай бұрын
u ever find out?
@ErickMartinez-sz1oq4 жыл бұрын
Would the type 1 extension harness work for the 350Z ? Keep up the fire content 🔥
@Vq_Kev4 жыл бұрын
if u have the de motor they have a separate harness as for the hr I'm assuming a type 1 would fit but the safest bet ot to take a pic of your current sensor to make sure its the upstream one
@dajhonify3 жыл бұрын
Holy shit that sounds nasty! Nice work man!
@Vq_Kev3 жыл бұрын
yea it was one of my fav setups 💯
@courtmcclain16803 жыл бұрын
@Nismo Kev What spoiler is that?
@Vq_Kev3 жыл бұрын
its the battleareo duckbill
@james366064 жыл бұрын
Bro that shit sound good asf 😭! How much was it I need it on mine
@Vq_Kev4 жыл бұрын
isr headers $400-600 motordyne $2000 if u buy it new, used u can get them around 1k-1.2k
@johnososkalo47053 жыл бұрын
What year is your 370z and are these the DE 350z headers? I heard the DE isr headers are a direct bolt on to G37s/370zs
@Vq_Kev3 жыл бұрын
my 370z is a 2018. yea they fit those cars, just depending on the year you might have to move the studs
@johnososkalo47053 жыл бұрын
@@Vq_Kev did you have to move your studs around? Do you know what years require the stud relocation?
@Vq_Kev3 жыл бұрын
@@johnososkalo4705 I had a shop install them, but I'm sure they had to move the studs around
@cre8tivegarage1574 жыл бұрын
Your videos are hot 🥵 🥂 we are definitely subscribed
@chickybartolome85863 жыл бұрын
What year is your 370z?
@Vq_Kev3 жыл бұрын
2018 🤙
@tonyponce61962 жыл бұрын
Did you have them heat wrapped ?
@Vq_Kev2 жыл бұрын
yes I wrapped my headers
@austinwolfe2373 Жыл бұрын
4:40 can still hear it like a mile away. That is fantastic!🫡❤️
@devanrogers31332 жыл бұрын
WOW! Sounds loud and amazing!
@johnnybravo61563 жыл бұрын
How are your headers holding up
@Vq_Kev3 жыл бұрын
no issues and I have them heat wrapped
@bullitt09104 жыл бұрын
Are they the 5 inch rolled tips? I just bought a 370 and am getting the motordyne exhaust.
@Vq_Kev4 жыл бұрын
no they were the 4.5 I believe, the 5in tips cost more. The 4.5 actually melted a piece of my bumper 😅
@bullitt09104 жыл бұрын
@@Vq_Kev thanks for the info my man. Might have to look into some kind of buffer between the two.
@Vq_Kev4 жыл бұрын
@@bullitt0910 no worries glad to help!and you can always add washers/spacers by the hangars so the exhaust sits a lil lower so you don't burn your bumper. I only had this issue because of my flame map😅
@k-a1473 жыл бұрын
What wing is that homie?
@Vq_Kev3 жыл бұрын
battleaero duckbill
@Realpmurph3 жыл бұрын
What type of extension harness would it take for a 2014 370z automatic transmission? Thanks in advance
@Vq_Kev3 жыл бұрын
I can't say for sure because the harness are diff depending on the yr of your car. safest bet is to check your plug to know which one is for your car
@Realpmurph3 жыл бұрын
@@Vq_Kev Appreciate it !
@Vq_Kev3 жыл бұрын
no worries, and it might be type 1, but It might be different just check to be sure
@jeffreygonzalez98744 жыл бұрын
What year is your 370z?
@Vq_Kev4 жыл бұрын
2018
@07wrxtr14 жыл бұрын
Sound amazing! were you able to run high flow cats or is this catless? I've yet to find a header combo where you can still run high flow cats for those of us that don't want to tamper with the car every 24 months come DEQ time. Just have a FI catback + CF mufflers, which I absolutely love the sound, but the stock cats are garbage needless to say.
@dannydanny88904 жыл бұрын
The long tubes replace where the normal headers and cats are, if you wanted to run cats youd need to put them past that in the exhaust, which would require some custom fab and more sensor extensions.
@Vq_Kev4 жыл бұрын
no I cannot with this set up, the only headers I know that have modules you can swap out for a resonator, straight pipe or hfc is the motordyne headers. might be worth a look if thats the route you want to take 👌
@siknin14 жыл бұрын
PPE has a catted Y pipe option
@TheMickas1233 жыл бұрын
PPE and Motordyne offer that option and they both are equal length headers for a better flow and sound! 👌
@HuyNguyen-bb3cy4 жыл бұрын
wow so cool
@v36eezy2 жыл бұрын
On a scale of 1-10 how loud is this setup in person?
@Vq_Kev2 жыл бұрын
it's loud but not tomei loud 😅 so it's like a solid 8? tomei with headers is 10/10
@v36eezy2 жыл бұрын
@@Vq_Kev would u say isr single exit is quietest between the two?
@Vq_Kev2 жыл бұрын
@@v36eezy yea its quieter for sure compared to motordyne and tomei. The motordyne had the best tone. the tomei is an experience lol. and isr is more tame , but has a nice growl when ur on it. if u don't have a resonated y pipe or test pipes it can be louder . but may get raspy.? depends on ur taste
@v36eezy2 жыл бұрын
@@Vq_Kev that’s exactly the answer I was looking for 😂 I’m switching my setup soon
@guzman23daniel4 жыл бұрын
Awesome sounds my motordyne LTH are on the way just got my Shockwave Did you wrap your window controllers carbon fiber or is it a piece?
@Vq_Kev4 жыл бұрын
nice I'm curious about those headers! and its a cf overlay I bought
@guzman23daniel4 жыл бұрын
@@Vq_Kev you remember where? And thanks I order the one with the helmotz resonators So it's like having art pipes ill post a clip on the gram when they finally come on @d187g
@Vq_Kev4 жыл бұрын
@@guzman23daniel nice and I got them at the Zstore
@finkdizzle4 жыл бұрын
Loud af. Nice. I need to hit some fly by clips.
@Vq_Kev4 жыл бұрын
yea its definitely loud 😭 I went from art pipes so it was tame only loud when on it... this setup has me driving careful around the city under 3k rpm or its screaming🤷♂️ but its the trade off for more power. the sound is way deeper tho
@finkdizzle4 жыл бұрын
@@Vq_Kev i roll my car to the driveway before cold start in the morning trying not to wake my wife. Neighbors can suck a lemon lol i do try to pull out slow though, not that much of a bitch
@Vq_Kev4 жыл бұрын
@@finkdizzle yes I just try to be mindful but u can only do so much 🤷♂️
@MrDizaier3 жыл бұрын
How is dron , rattle when cruising???? 70mp up? Right now I had isr full exhaust is fukennn rattle.......
@Vq_Kev3 жыл бұрын
rattling wasn't a problem, gotta check ur fitment and see if something is loose or touching something. and drone wasn't to bad tbh cuz the motordyne had alot of resonators. would only hear drone at like 70mph but it wasn't overpowering like my tomei
@MrDizaier3 жыл бұрын
@@Vq_Kev I was check rattle is resonator inside,(((( deceleration drop rpm,((((
@Vq_Kev3 жыл бұрын
@@MrDizaier resonator on your isr exhaust? if so you can replace or weld a new vibrant one on it, will probably sound better tbh. hope your able to resolve it.
@MrDizaier3 жыл бұрын
I check already rattle is between end of y pipe with resonator....;(((.. maybe is bad construction factory isr y pipe to much flow air..going
@kaniacc3 жыл бұрын
Hey you know what type the g37 takes??
@Vq_Kev3 жыл бұрын
depends on the year of your car boss, gotta take a look at the connecter for your sensor and see which one matches up with sensors sold at nisformance. that's how I did it.
@kaniacc3 жыл бұрын
@@Vq_Kev for sure thanks bro appreciate it👍🏼
@6mt_sdan3 жыл бұрын
What's up man how much did the shop charge to install these? Thanks n sweet z!
@Vq_Kev3 жыл бұрын
they charged me $300 idk if thats the price they still use 🤷♂️ they said it was a pain the a** it was ralphsmufflers
@theviiruzs66043 жыл бұрын
@@Vq_Kev i would say that’s a good ass price i did my headers myself ISR too and they were a pain in the ass . like i won’t ever attempt to do headers on a car again hard
@Vq_Kev3 жыл бұрын
@@theviiruzs6604 yea I installed headers on my 350z I knew it was a pain that's why I didn't want to deal with it on my 370z but yea the price was very reasonable in my opinion
@davidnewton59613 жыл бұрын
What wheels r those
@Vq_Kev3 жыл бұрын
varstoen es2 🙏
@cesardelacruz46314 жыл бұрын
if would get this ISR long tube headers on my 350z w/ n1 invidia exhaust. Would it pass my emissions test? lol I live in Illinois and they only do OBD2, so IDK if I should wait till I do my emissions and then install it or just do it before.. i already have my n1 invidia install btw. What do you think?
@Vq_Kev4 жыл бұрын
I dont believe it will pass because it removes your catalytic converter it will throw a CEL code eventually , you will have to get tuned for the car to run 💯
@cesardelacruz46314 жыл бұрын
So after I get my car tuned will I be able to pass emissions? Or will the code still be there?
@Vq_Kev4 жыл бұрын
@@cesardelacruz4631 it depends on how strict of emissions are where u are. here in cali you won't pass at all, you have to pay someone to pass it for u
@Vq_Kev4 жыл бұрын
@@cesardelacruz4631 idk how it is over there.
@siknin14 жыл бұрын
@Cesar De La Cruz I don’t know how strict they are in your area but I would do the emissions test and pass. Before putting headers on. Unless you have a friend that is gonna pass you regardless
@hakimrahman857 ай бұрын
Mind sharing these Te37 size and specs ?
@johnbaylor57793 жыл бұрын
May I ask why you chose these over the motordyne LTH?
@Vq_Kev3 жыл бұрын
I was torn between both of them, ISR for the price was hard to beat and motordyne was out of stock at the moment. If I could do it again I would get PPE headers or motordyne if I wanted to quiet my tomei down more
@johnososkalo47053 жыл бұрын
@@Vq_Kev why would you switch brands if you were to do it again? What complaints do you have about the isr lth?
@Vq_Kev3 жыл бұрын
@@johnososkalo4705 no complaints its good for the price, if I switch it would be for motordyne in order to add resonators to quiet my tomei down. if I stick with my motordyne I would have gone ppe headers cuz that's the best in terms of power. but NA is slow, once I drive a boosted Z I realized that. in saving for boost now.
@johnososkalo47053 жыл бұрын
Ok I see, I definitely need to make my setup louder plus I'll gain some whp switching out my Art Pipes for these isr LTHs. And you definitely cant beat the price for what you get. Some test pipes alone are pricier than these and these are headers and test pipes in one. I have a 6mt g37 coupe with an Ark Exhaust and Art pipes and although it sounds beautiful it is extremely quiet for a catless VQ setup. There are a total of 8 resonators/mufflers from the test pipes back and swapping my Art pipes for these will remove 2 plus give me some more gains.
@johnososkalo47053 жыл бұрын
I'm definitely boosting my G eventually as well either doing the Topguns SC kit or Boosted Performance single turbo.
@MyBryant1234 жыл бұрын
How was the install bro ? New subscriber 🤗
@Vq_Kev4 жыл бұрын
I had the headers installed at a shop, it went smooth they finished it in a day
@MyBryant1234 жыл бұрын
Thanx for reply
@PapiDivad Жыл бұрын
So I plan on getting the same longtube headers with the same exhaust for my G37. Will the headers hook straight up to the exhaust because they are longtube or will I still need to have my cats on?
@Vq_Kev Жыл бұрын
longtube headers replace your cats. so it basically connects to the y pipe. If you have short tube headers you keep your cats.
@shampooless11384 жыл бұрын
Is thier any rasp when you drive ?
@shampooless11384 жыл бұрын
And drone?
@Vq_Kev4 жыл бұрын
in regards to rasp I have some around the high rpm range when I'm flooring it. but its very minimal. my art pipes nd motordyne had no rasp. this one a lil. with the headers there is some drone but its not crazy loud like a tomei lol
@shampooless11384 жыл бұрын
Nismo Kev wow thanx for the response 👍
@Slowmazda9 ай бұрын
When u did the cold start and the rpms started to drop what was that knocking noise my car has the same noise and can’t figure out what it is and it’s really bothering me ngl
@rafarios15484 ай бұрын
Timing chain slack from what I heard from other people on 350z forms
@gavinsanchez70903 жыл бұрын
I was considering getting the same headers for my 2017 z it’s a base coupe model. Would the connector type be a “1”from Nisformance as well?
@Vq_Kev3 жыл бұрын
they could be the same connectors for you, but they vary year by year safest bet would be to check your plug to make sure
@gavinsanchez70903 жыл бұрын
@@Vq_Kev Thanks for the advance man! Nice build too 👌🏼
@Vq_Kev3 жыл бұрын
@@gavinsanchez7090 thanks and I'm pretty sure its a type 1 for you to, cuz mine is an 18
@Vq_Kev3 жыл бұрын
@@gavinsanchez7090 stay tuned for my next video🤷♂️ 🌽
@gavinsanchez70903 жыл бұрын
@@Vq_Kev That’s what I was thinking too, but I’ll double check. I’ll check out the next vid though...e85 boyz 💪🏼
@95TaLoNdsm4 жыл бұрын
I was thinking of getting headers for my G. I have the Shockwave as well. So I saw you posted you had art pipes prior to this. So this obviously removes art pips and goes straight to the Y pipe. Are you running the regular MD Y pipe? The original one that has the larger "suitcase" resonator, or did you opt to get one of the new modules like the thunder pipe, hfc, or resonated? Just trying to get an idea of what you're running right after your Y pipe.
@Vq_Kev4 жыл бұрын
I have the original one that comes with the motordyne, I was debating changing the module but cars already loud 😅 I feel if u get the thunder it would be like straight pipe loud, the resonated one might be interesting, but I believe the one it already has cleans up the sound. but to each their own.
@Vq_Kev4 жыл бұрын
the good thing is you can always change it, I'm waiting for ppl to dyno it so i can see if it's worth upgrading it
@demigodq60833 жыл бұрын
Nismo Kev is it possible to run the motordyne Art resonator that you can run on the motordyne header on the ISR header to kill some drone
@Dan-cr1ll9 ай бұрын
Hey man I have isr long tube headers did you have issues with fitment on the motordyne exhaust
@Vq_Kev7 ай бұрын
no I didn't, fit perfectly for me
@Walter370z Жыл бұрын
Did you have to put heat wrap on it since there’s no more heat shield from factory?
@Vq_Kev Жыл бұрын
no you don't have to, I did it to help keep the heat within the headers to help with scavenging
@CrossBone972 жыл бұрын
I know this is an older video now so hopefully you still see this. Do you know if this will fit with the invidia Gemini cat back?
@Vq_Kev2 жыл бұрын
yes it will, the longtube headers only replace test pipes and exhaust manifold. You can still run an aftermarket y pipe and which ever exhaust u choose
@jponz854 жыл бұрын
How much was it? I have an 07 HR
@Vq_Kev4 жыл бұрын
I got it on sale, idk how much it's going for now, I put a link in the description
@vq35hr34 жыл бұрын
Cheaper than art pipe and more gains. And you don’t gotta deal with exhaust leaks, keep ur stock HR headers in case u wanna boost
@faduhfade773 жыл бұрын
Yo kev What gaskets u end up using?
@Vq_Kev3 жыл бұрын
for the headers I didn't use the ones isr provided, I used some other gaskets that the shop provided they are thin metal ones like the ones that the oem headers use
@faduhfade773 жыл бұрын
@@Vq_Kev ok ok. So Ralph’s muffler installed right ?
@Vq_Kev3 жыл бұрын
@@faduhfade77 yea they installed them for me
@faduhfade773 жыл бұрын
@@Vq_Kev ok last question . How much and how are those gaskets holding up.
@Vq_Kev3 жыл бұрын
@@faduhfade77 I have no problem with them so far they are fine
@Realpmurph3 жыл бұрын
I have just installed ISR headers and an ISR Y Pipe on my 370z along with a Remark V2 mid pipe and muffler... but now I’m getting like a hiss and vibration noise above 3k rpm and and also when it revs back down... the sound is coming from the flex part of the y pipe. It’s vibrating so much and is really annoying. I’ve heard of people putting water hose clamps around the flex part of the y pipe to stop it from vibrating so much, which I might try. Any other suggestions? Thanks
@Vq_Kev3 жыл бұрын
make sure you don't have an exhaust leak , nd these cars have a hiss when longtube or test pipes are added
@Realpmurph3 жыл бұрын
Do you have Instagram? I’d like to do you the video and get your thoughts
@Vq_Kev3 жыл бұрын
@@Realpmurph @vq_kev
@pinchevictor69454 жыл бұрын
Sounds clean bro!
@Vq_Kev4 жыл бұрын
thanks!!💯
@kev_g37x3 жыл бұрын
You think ppe are better?
@Vq_Kev3 жыл бұрын
PPE is a solid choice it's on the higher end, the merge is parallel so it's supposedly a lil better if your going all out NA🤷♂️ but headers in general will yield around the same
@gray37064 жыл бұрын
What’s up, man. I currently have isr resonated test pipes and an invidia gemini cat back but am looking for something louder while still maintaining that deep tone. I’ve had a Greddy Revolution rs single exit on order for months now and it’s delivery time just got pushed back another 4 weeks so I’m thinking about getting something else if there are better options that aren’t too expensive. Would appreciate your opinion💪🏻
@Vq_Kev4 жыл бұрын
greddy dual, and the greddy single are good options, the isr single as well. if you have the cash 💸 then motordyne catback is amazing as well. The gemeni is really quiet in my opinion, my friend has it with art pipes
@gray37064 жыл бұрын
Nismo Kev good to hear. I’ll keep my order on the Greddy👍🏻
@Vq_Kev4 жыл бұрын
@@gray3706 yea greddy is good and will be worth the wait
@harrymoon81543 жыл бұрын
What would be better z1 headers or the irs long tube headers you guys tell me
@Vq_Kev3 жыл бұрын
I feel like the best short tube headers is z1, for longtubes I think ppe or motordyne are the best
@harrymoon81543 жыл бұрын
@@Vq_Kev Thanks
@AlbertZora4 жыл бұрын
Do headers make it sound raspy?
@Vq_Kev4 жыл бұрын
In all honesty it depends on your exhaust set up, mine doesn't sound raspy in my opinion because i have resonators in my y-pipe i might be switching to a tomei y pipe or a motordyne y pipe soon so if the sound changes ill make sure to address it. If you don't have any resonators it will sound raspy. But sound is subjective.
@abunaiz34nismo684 жыл бұрын
👍
@andrewmomodu48453 жыл бұрын
Will I need the extension harness for an Infiniti G35 ? Or is that only need for 370s ?
@Vq_Kev3 жыл бұрын
u need an extension harness, the question is what type of harness, because 350z/g35 and 370z/g37 have different adaptors
@andrewmomodu48453 жыл бұрын
@@Vq_Kev Bet,appreciate that !
@Vq_Kev3 жыл бұрын
@@andrewmomodu4845 no worries, glad to help. I know concept Z sells the harness for the 350z idk of they work on the g35. they should have it listed. If not u can get the sensors where I did. the link should be in the description 👍
@andrewmomodu48453 жыл бұрын
@@Vq_Kev Just found them on concept z, you’re too clutch thanks man !
@Vq_Kev3 жыл бұрын
@@andrewmomodu4845 no worries 👍 would appreciate the sub if u wanna see more content
@minecrafter72913 жыл бұрын
How did you like your original set up with the ark pipes ? I’m planning on getting a motordyne but not sure if I should pair it with the ark pipes or get long tube headers. Why did you switch it?
@Vq_Kev3 жыл бұрын
I miss that setup, was crisp. I wanted something a lil more louder and more power hence why I went with longtubes. the longtubes and motordyne was perfect imo. I switched to tomei because it's stupid light and makes more power. If I could do it over I'd probably get ppe headers and motordyne exhaust
@minecrafter72913 жыл бұрын
@@Vq_Kev thanks for the quick reply! I’m not trying to be too loud so I’ll probably go with the ark pipes
@Vq_Kev3 жыл бұрын
@@minecrafter7291 no worries and yea you'll be good with that
@EL-sc9on3 жыл бұрын
@@Vq_Kev why ppe headers bro? I heard they make the same power as the isr?
@StillCoastin3 жыл бұрын
@@EL-sc9on ppe is crafted a lot better than the isr’s. PPE is also Equal Length & the collector found on it is one of the best *if you opt out for it. (Equal Length Headers give the VQ that high pitch scream & exotic intoxicating sound). Don’t get me wrong isr’s are the best bang for your buck when it comes to LTH
@jlou6063 жыл бұрын
Are you running art pipes
@Vq_Kev3 жыл бұрын
you physically can't run any test pipes when you have longtube headers, where they end the y pipe begins. so this set up was just my isr longtube headers, and motordyne exhaust
@jlou6063 жыл бұрын
@@Vq_Kev ahh gotchu thanks for the quick response
@Vq_Kev3 жыл бұрын
@@jlou606 no worries just trying to help out all my subscribers and viewers
@Hondacbr600rrish3 жыл бұрын
Nice sound! But going with art pipes and z1 headers 🤙🏽
@Vq_Kev3 жыл бұрын
that sounds good to! I might be switching to that setup or motordyne resonated headers
@HirschPower3 жыл бұрын
@@Vq_Kev Why?
@Vq_Kev3 жыл бұрын
sound 😅 guess I'm getting old trying to tame the tomei it's dummy loud
@HirschPower3 жыл бұрын
@@Vq_Kev Forgot that you switched to Tomei since this upload. Do you have more videos of this setup? I’m considering going back to it if I can find another shockwave, as I think I’m going to get tired of the PPE LTH + Tomei setup quite quickly.
@Vq_Kev3 жыл бұрын
@@HirschPower I don't unfortunately, but honestly this was my favorite setup easily it was a perfect balance.
@fernandohood55424 жыл бұрын
How much power did you gain or lose?
@Vq_Kev4 жыл бұрын
I wouldn't be able to tell u because I haven't gone for a retune yet, I plan to in the upcoming months and will make a video of it. got rn i pretty much have my butt dyno too go on😅 , car feels better in the mid/top end compared to the art pipes + stock headers
@fernandohood55424 жыл бұрын
@@Vq_Kev Feel is subjective I await the numbers.
@Vq_Kev4 жыл бұрын
@@fernandohood5542 👍 no worries I'll make sure to post the numbers once I have them, look forward to that retune video!
@vq35hr34 жыл бұрын
Which Y pipe
@Vq_Kev4 жыл бұрын
isr headers bolt right up to my motordyne e370z catback exhuast. so the motordyne y pipe :)
@vq35hr34 жыл бұрын
Nismo Kev does the motordyne Y pipe come with the whole catback system ?
@Vq_Kev4 жыл бұрын
@@vq35hr3 yes it does 👍
@Vq_Kev4 жыл бұрын
@@vq35hr3 you can modify the y pipe as well, they sell modules u can buy from Z1 motorsports if u want no muffler, or resonated, or straight pipe
@vq35hr34 жыл бұрын
Nismo Kev so can I run a High flow cat integrated into the y pipe while running the isr headers