37x12.5 17’s on a 2008 LIFTED Trailblazer by Bet It Up Kustoms BANKROLL TIM

[@ImHim6Fifty]

Beautiful upgrades done on the Trailblazer brotha

[@headingwest67]

"I do whatever i want".

[@JohnSmith-nw7sq]

I like the Chevy, I love trailblazers I had about 5 different ones.

[@Lemusmic]

Dam nice saw one today same color thinking of getting it now after seeing yours

[@anthonynancydelarosa6781]

Looks good..... I'm looking to do it on my 2004 Chevy Trailblazer EXT LS. All you need are HELLA lights Safari luggage gear rack

[@BETITUPKUSTOMS]

I’ve got 26x12 with 37” 13.5 wide now…….2” body lift and a custom coil over set up on front ….💯

[@StarbuckJames]

Did you do it yet? I also have 04’ ext. got some videos of it on here

[@BETITUPKUSTOMS]

Yeah, it’s on my channel

[@Jason_Phillips3679]

Looks good. I just got a 2007 4wd trailblazer LT.

[@farithrobledo4559]

You can get 7.5" of lift with a 3"F & 2"R suspension lift, 3 inch body lift, z71 Yukon (Moog 81069) rear springs on SkyJacker H7060 shocks, with Moog 81114 coils in front on Bilstein 24-103336 shocks.

[@aubep1323]

Were can you find a 3 inch body lift for a tb

[@TonyWorkswell]

With what uca's?

[@huntert6452]

@@aubep1323 custom made

[@richardlanning462]

@@aubep1323 jp has them

[@bobberbuilder6122]

How well do the stock front axles hold up with that setup

[@theboogyman4985]

That's a cool TB man🇺🇲👍🏼, mine drinks gas and strong suvs

[@Uncle--Fatty]

HELLZZ YEESSS..!!! same game on the dang ol' 97x aero Saab...?

[@CNR.5K]

Just bought a Trailblazer in early August, I love it already but I can't find ANYTHING for it, the best I can find is a BDS 2 inch lift which is good I guess but I want to fit more than 33s on it, preferably without trimming but I know that's inevitable

[@BETITUPKUSTOMS]

2wd or 4wd ? Mine is only 2wd I still haven’t put my 2 inch body lift on, I have the leveling kit on, gives 2-3 inches in front and like 2inches in rear and I have another front strut lift that I haven’t put on,

[@CNR.5K]

@@BETITUPKUSTOMS 4x4, I'm thinking about the BDS suspension lift and another 2-inch body lift I found, I don't remember the company

[@TonyWorkswell]

I understand you did the leveling kit i get you had to cut some of the fender area. What else do you mean by "fab the rest". I got a ext on 33 10.50 17 them 37s look good though

[@BETITUPKUSTOMS]

I Fabb’d up the coil over set up in the front but I don’t think I had did it at this time..🤷‍♂️

[@watsonlow22]

Love this

[@BETITUPKUSTOMS]

💯💯

[@umutdegismen]

looks great dude! how is the traction of those tires on snow and icy road comparing snow tires?

[@BETITUPKUSTOMS]

When these were on it yes…… it’s got 26x12’s and 37’s now…

[@umutdegismen]

@@BETITUPKUSTOMS so you say, these can handle on icy road and don't need regular snow tires? coz l wanna lift my tb but can not decide to use those kind of off road tires instead of snpw tires. l live in West Yellowstone and we have pretty much snow here :)

[@BETITUPKUSTOMS]

Yes they drove good in the snow, the rim being skinnier then the tire width keeps the tire taller in the center to push the snow to the sides, where a more flat style would pack the snow down…

[@tylermiller361]

How much of a level kit did you have to put on it to fit those. I have same year and model. But can’t fit my 35•12.5 on it. Wondering if a 2 inch level kit will let them fit

[@BETITUPKUSTOMS]

Tyler Miller mine has the leveling kit plus some LIL knuckles, but I cut my fenders and my rear doors, just a lil on the rear doors.......but I just got a 2” body lift, soon to put on and going 18” rim with 40x13.5 tire , my wheels stick out cause I have adapters for more wheel rim fit , adapted to 6x5 TAHOE

[@unclebishoppeskitchen5838]

@@BETITUPKUSTOMS I've learned that you can get wheel spacers to give you the two inch offset but also give you the standard chevy lug pattern of 6x5. I have no idea why chevy decided to give this truck a 6x5.5 wheel lug pattern. I call it the unicorn.

[@michaeljoshoutdoors14]

I would love to know how you put 37 on your trailblazer I want to do the same please hit me up thanks

[@dallaserickson2345]

Looks like lift, spacers and cut wheel wells.

[@jRomero713]

Did you swap out the gears because those have a 3.73 gear ans if you have 37's that would put it at 2.98 and would struggle uphill.

[@BETITUPKUSTOMS]

My truck is 342, but no, that’s still something I need to do.... 456 with the 37’s will put it back to stock roll out......

[@joekrim6557]

looks tough

[@JoshSk8sGoofy]

Hey man, didn't know if you happen to tow anything or not. And if so, do body lifts mess with towing? I've got a 2008 Envoy on a three inch lift and 33s but wanted to get it a little higher in the air. Thanks

[@BETITUPKUSTOMS]

You’ll be all good

[@davidt8245]

What did you do to the knuckles as stated in the other comment? I’m going to soon install a 3 inch suspension lift kit to mine

[@unclebishoppeskitchen5838]

If you are going to lift the truck and put bigger tires on it you will have to either find rims that have a crazy offset, which is damn near impossible with the trailblazer because of it's stupid unicorn bolt pattern, or get hub-centric wheel spacers. In the rear the tires will rub in the fender well without spacers. In the front you have to clear the knuckle and upper ball joint. The stock 29" tire fits just underneath the ball joint. Spacers are a must. Get good ones because the shitty ones will put your life in danger. Also get the 2" spacers because you don't want to have to cut the lug bolts to use spacers. They will also give you great poke on those tires. Also 33" tires are the max size you can use without having to cut and trim any of the fender wells. Especially since you want to use a three inch leveling kit. I also found you can get another 2" if you replace the front struts with a mix of Bilstein shocks and moog type r springs. In the rear use the moog type r springs and monroe coil overs for shocks. You will be sitting pretty.

[@Rooftop2468]

Brian Bishop type r? meaning civic type r?? im tryna fit 35’s

[@veryfraudulent6390]

@@unclebishoppeskitchen5838 very informative comment. I appreciate it

[@rottenhead8385]

@@veryfraudulent6390 seriously

[@kalilipa]

Do you have any cv axle problems? If so, what front cv axle do you use for sharp angle die to lift?

[@BETITUPKUSTOMS]

Mine is only 2 wheel drive..💯💯

[@sybshyyoungbull1098]

can you stack two 3 inch spacers on the front to get a lean with it or would that be harder than it sounds ?

[@BETITUPKUSTOMS]

You can try it...

[@michaelbauerle9182]

Sounds like a nightmare because you should not use more then one spacer in the struts. The angle on your ball joints will come apart.

[@rottenhead8385]

please don't. live, live a long good life.

[@Psyclone129]

try to install one then ask again.

[@huntert6452]

What have you done about the balljoint angle?

[@BETITUPKUSTOMS]

I haven’t had a problem with them, but my motor just blew up yesterday, lost oil pressure, 230k miles

[@huntert6452]

@@BETITUPKUSTOMS you sure it’s not the oil pressure sensor, get a oil pressure test kit because that gauge is known to be a dummy gauge that doesn’t actually work

[@BETITUPKUSTOMS]

No, my shit went rattle rattle thunder clatter boom boom boom.......🤣💯

[@leftybronson8800]

@@BETITUPKUSTOMS blew the rear main seal? The gm motor is known for it past 200k

[@juancordova1117]

Hey man I was wondering what you meant when you said you got LIL knuckles ?

[@BETITUPKUSTOMS]

The little twist in gray colors coil spring boosters.... they come in a 4 pack...

[@juancordova1117]

@@BETITUPKUSTOMS How much lift do those things give? Up until today id never even heard of of that.

[@BETITUPKUSTOMS]

2 or more inches if installed, stacked

[@craiglinnemeyer1324]

I love it man!! How much lift and trimming? I wanna do this!

[@BETITUPKUSTOMS]

This is like 4 inches on the front and 3 on the rear, 1” 1/4 wheel adapters to bring the wheels out and clear the front upper ball joints, front fenders are trimmed a lil and of course the bumpers, if I had put the body lift on at this time would only have had to trim a very lil.. and keep in mind this is only a 2 wheel drive not 4wd

[@craiglinnemeyer1324]

@@BETITUPKUSTOMS only a 2wd?!?! Damn!! I'd love to do this to my 4x4 envoy!! Sick as fuck!

[@TonyWorkswell]

4" my not work with cv axles

[@reivaxcruz8324]

A tire 35x12.50R20 can fit in a 6 inch lifted trailblazer?

[@BETITUPKUSTOMS]

Yeah

[@reivaxcruz8324]

Do i have to cut or trim something?

[@BETITUPKUSTOMS]

Possibly, due to wheel offset

[@reivaxcruz8324]

The wheel is 20x12 -44mm and the tire is 35x12.50R20 M/T

[@reivaxcruz8324]

Im thinking of buying 2 inch spacers also

[@tylermiller361]

So you have a 3 inch lift kit. But wouldn’t those tires still hit the front struts. What did you have to do to make those tires fit.

[@BETITUPKUSTOMS]

Adapters, trailblazer 6 lug to Tahoe 6 lug that’s why they stick out, and I cut my fenders , bumpers and back doors....

[@tylermiller361]

BET IT UP KUSTOMS TIM BOURGOINE what size adapters. I have 285/70/17 tires waiting to be put on. I ordered 2 inch spacers and 3 inch lift kit. Do you think those tires would fit with all that ordered.

[@Rooftop2468]

BET IT UP KUSTOMS TIM BOURGOINE what all did you have to fab up..? i got a trailblazer i wanna put 35’s on

[@DJFRESHSPIN]

@@tylermiller361 can you send a picture of final result to [e-mail] I literally just ordered the same thing ! Pretty excited

[@jonathanhummelman6505]

same, i got a set of wheels with 35's. i have 2" adapter/spacers can i remove front bumper and rear bumper and not lift? i really dont want to change suspension height as i want stock drivetrain angles and i also really dont want to change body height as my ride is quite good, dont want all the extra roll. can this be achieved with spacers and trimming?

[@Lemusmic]

How dose the in6 handle those tires

[@BETITUPKUSTOMS]

Straight 6 4200, drives and pulls good with stock gear 342 , but my speedo is off needs a 456 gear to be back to a equal set up....

[@Lemusmic]

How's the mpgs with stock and those

[@BETITUPKUSTOMS]

200 I think but the wife drives hard

[@arminmartinez9027]

What’s your off set on the rims

[@torileno9600]

Did you changed your shocks and struts so the ride feels more smooth?

[@BETITUPKUSTOMS]

TrickyAmarillo GAMES backs are KYB SHOCKS nice ride, fronts are some bullshit cheap struts Junk, I’m going to do a custom coil over install VIKING

[@dontbeakaren6145]

@@BETITUPKUSTOMS did you have to modify your upper arm's or flip them over and switch to opposite sides

[@BETITUPKUSTOMS]

No, I have adapters to set the wheel out some to clear the control arm from the tire....

[@dontbeakaren6145]

@@BETITUPKUSTOMS I guess I misunderstood you didn't lift the Blazer with strut spacers you just put bigger tires to raise it up

[@BETITUPKUSTOMS]

I have strut spacers....and knuckles

[@YENKOGT]

Looks like a baby tahoe, bes trailblazer i have seen

[@BETITUPKUSTOMS]

Right.💯💯💯

[@tylermiller361]

Where did you get your rims

[@BETITUPKUSTOMS]

Quint’s Tire in Aurora, Illinois on Dearborn st

[@erich84502b]

They look different lifted

[@chrisbowman4346]

What exhaust do you got

[@BETITUPKUSTOMS]

40 series flowmaster

[@chrisbowman4346]

@@BETITUPKUSTOMS sounds good

[@jacklacy6492]

I saw two chicks driving this thing around in Plano

[@BETITUPKUSTOMS]

@@jacklacy6492 yeah lol the one driving is my daughter, it’s got 40x13.50 on it now as when you seen it…

[@jacklacy6492]

@@BETITUPKUSTOMS 40s is crazy work. The thing is pretty cool

[@felipesantiago5656]

Hi where you buy the tire and rims?

[@BETITUPKUSTOMS]

Quint’s Tires Aurora, Illinois

[@austinstrickland8539]

Is this the 4.2 l

[@BETITUPKUSTOMS]

Yes sir.....

[@austinstrickland8539]

@@BETITUPKUSTOMS whats done to the exhaust it sounds pretty good

[@BETITUPKUSTOMS]

40 series FlowMaster 2 1/2

[@tylermiller361]

How much of lift do you have

[@BETITUPKUSTOMS]

Tyler Miller 3”

[@pepeiann]

The you cant fit 33s on a trailblazer conquerer

[@michaelfulton8972]

I hear the wheel rubbing

[@michaelfulton8972]

Good to know ur giving it to ur wife

[@BETITUPKUSTOMS]

Yeah it rubs.... I just gonna lift it higher when I get sometime

[@andydeitrick1455]

🙌🙌🙌🕺🕺🕺

[@georgemcfly1205]

Buy a 4Runner

[@thedude5472]

Way too much tire for that. Dumb looking mall crawler.

[@BETITUPKUSTOMS]

I have 26x12 rims now with 37x13.5 tires, I’m about to do a 2” body lift and adjustable custom coil overs in the front......

[@TheOffRoadDiver]

Mall crawler, haha. This guy obviously doesnt know what these are capable of.

[@ShiningTrapezoid]

@@TheOffRoadDiver lol it's 2WD. Not capable of shit.

[@Evo-rx6rv]

So cool man, I have an envoy I'd like to lift like that👍🏻

[@BETITUPKUSTOMS]

Mine is only 2 wheel drive tho..

[@BETITUPKUSTOMS]

ZONE, makes a 2” body lift and you can get a strut lift set up fro the front that’s 3 inches, then you can do a 2” cup for the rear springs,

[@Evo-rx6rv]

@BETITUPKUSTOMS my envoy has airbags in the rear. I suppose I would have to upsize the bags right. Any suggestions on that? I'd like to keep them

[@BETITUPKUSTOMS]

You might be able to put the cup right under the bag..