3D 🤯 Analyzing one of the Best-Selling engines in the world. The VW Beetle Air Cooled

[@loudawggvw9721]

Aircooled owners drop year and model 👇🏽👇🏽69 Baywindow

[@dannymostarac1799]

1973 914

[@lunarpking]

74 Super beetle, original engine and never touched. It’s about time though, it’s starting to drip a lot more oil and consuming it too. Unknown miles, probably 150K or more from what I can tell. Still runs strong though!

[@jasonGreenVw]

1974 super beetle

[@Sebi076]

1971 Fiat 500

[@adamwest1138]

73 Baywindow Kombi camper...which ill be spending the weekend under replacing the transmission bushings

[@thomasgary1219]

My grandpa bought a VW BEETLE brand new in February of 1959. He drove it every day until he had a stroke in 1984 and could not shift gears anymore. He gave the beetle to my dad and he kept until 1998. At that point dad the beetle to me and I still have it to this day. We estimate that the little beetle has had at least 5 engines. 3 transmissions. A dozen or so clutches. Hundreds of tires. I drive it when the weather is nice. Sometimes I look at it and I'm totally amazed. I can remember Grampa dropping me off at kindergarten in that little car, now I drop my grandkids off in it. Maybe one of them will have it someday. Oh I forgot to mention that we're pretty sure that it has well over a million miles on it.

[@chrisdevalcourt648]

What a wonderful story! A family treasure! Keep it and pictures and records of it in your family. It could be on antique road show some day!!!

[@pauleveritt3388]

Your car and I are the same age. Keep on rolling.

[@sydecarnutz972]

You must live in a rust/salt free area. Good for you! I grew up in the NE USA. My 69 Beetle (Bettle?) had to be junked due to rust by 1979.

[@thomasgary1219]

@@pauleveritt3388 Thanks. As long as I'm able to get parts for it, I'm going to keep bugging 😂😂😂

[@thomasgary1219]

@@chrisdevalcourt648 Thanks my friend

[@jimwebber7516]

My first car was a 10-year-old 1958 VW Beetle with the 36 hp engine. I loved that car and maintained it myself. As a young man, it gave me the independence I craved and the versatility I needed. Removing the rear seat back gave me more space in the passenger compartment and reversing the rear wheels gave me a wider stance and a sportier look. Equipped with a surfboard rack, I drover over the Santa Cruz mountains regularly to hit the waves. Years later, a friend was driving it and returned it with a blown valve. It broke off and embedded itself in the top of the piston. I disassembled the engine, hoping for the help of another flaky friend to turn the cylinders so I could reassemble my baby. Long story short, I was left high and dry and had to sell it in pieces for $100. I later saw my old car driving arcing town. Broke my heart! Thanks for this vid!

[@lunstee]

@4:24 What you indicate as a generator is actually an alternator. Earlier engines did indeed use a generator, while later ones had an alternator; the engine shown in your video is an earlier engine that's been retrofitted. The generators that were used were either a 90 or 105mm cylinder - roughly the same diameter as the pulley. Alternators use a much larger stator diameter to house the three phases of windings, so the housing has a bulge at the pulley to enclose that. The rest of the housing is still the same diameter as the late (larger) generator so they didn't have to redesign the interface with the fan and fan shroud, and only required a minor modification to the generator stand to serve as an alternator stand.

[@typograf62]

The engine was used on a popular type of very portable fire pump in Denmark by the CF (Civil Protection). It could be carried by two men or equipped with a front wheel moved like a wheelbarrow by one man. It worked!

[@MrTeff999]

BTW: the water cooled, front wheel drive "Beetle" was a Golf with a rounded profile -- it was not a Beetle.

[@mercer982]

It was pretty hated car at the time, i remember people always mocking it.

[@1vantheterr1ble47]

It’s a Beetle! A Beatle is a member of the Beatles pop group! FFS!

[@MrTeff999]

@@1vantheterr1ble47 Thanks. I'll fix that.

[@MrTeff999]

@@mercer982 It was so hated that Americans only bought 6,755,130 between 1964 and 1973.

[@htschmerdtz4465]

Actually I think the 2nd and 3rd gen Beetles are cute, but they lack cabin and trunk space.

[@lawrencemarocco8197]

I had an uncle who lived in California who had a home business rebuilding VW engines. The engine was held in by six bolts, He had a "loaner" engine that he would swap into the client's car while he worked on the rebuild. He also would do performance upgrades dealing with carburation, exhaust, pistons for increased compression, valves and other features.

[@dicksargent3582]

Four bolts. I grew up in a shop working on VW's

[@zipperneck9050]

@@dicksargent3582 17mm if I remember correctly. It's been a long time. 30 years since I wrenched my own VW.

[@dicksargent3582]

@@zipperneck9050 Correct.

[@babeim]

I removed the whole interior with flat head and 10 mm. Wish I never sold it

[@scottiencali]

@@dicksargent3582 If you wanna really get technical its 3 bolts and a nut... the bolt on the starter isnt supposed to come out. :)

[@oceanhome2023]

Some VW factory engineers who visited the USA were absolutely amazed how VW mania had added so many performance upgrades to the engine , to the body and to the handling this was expressed in an Automotive Magazine in Germany and inspired a lot of respect towards American VW aficionados

[@vonhalberstadt3590]

EMPI !

[@francocossu9192]

😂😂😂😂😂😂hanno smontato una Fiat 128 altro che fabbriche di dinosauri USA

[@davidyoung8521]

Simplicity at its finest .

[@chrisdevalcourt648]

@@vonhalberstadt3590 and Dean Lowery (Dinos Dinosaurs) and many others. They helped me back in the day when we were racing!

[@oceanhome2023]

@@francocossu9192 I had one very fun !

[@crosslink1493]

I had a few of those back in my college days, 1960s models - easy for a 'shadetree' mechanic with basic tool to maintain so it kept my transportation costs low. The only issue I had was overheating on summer drives, so I replaced the original oil cooler under the fan housing with an aftermarket exterior oil cooler mounted on the car's underside in back of the transmission brace and that solved the problem. Great cars if you just wanted basic transportation.

[@peter-pg5yc]

super basic you mean.. like stone age.. like the window washer was attached to spare what idiot does that.. less then 10 bucks i added a pump and a button did others cars when they saw mine.. darn happy too.. ever change the gas pedal cable carb was junk ate excellerator pump.. bad memories except for recaro type seats amazing

[@voltmeter2]

Clutch cable was even more fun. I have done both but loved the Beetles!@@peter-pg5yc

[@johnchandler1687]

From J.C.Whiney I got a 12 row cooler kit that included an oil filter and also an oil pump that moved 50% more oil than stock. It the held 5 quarts of oil and no more heating problems. I miss J.C.Whitney. their catalog was an automotive "wish book" for sure.😊( the cooler mounted in front of the fan intake so it lost much more heat than the original.,)

[@kurkkobain]

my father used a piece of wood and a rubber , so he opened the dorr from engine comaprtiment a little bit and then secured it with the wood and the elastic,, when engine was overheating,, so he drove with the door a little bit openm, the engine cooled a lot.. and no more problems and sezed up

[@johnchandler1687]

@@kurkkobain Was he afraid that piece of wood would knock-up his VW? 😆

[@peacetrain3320]

Almost equally iconic is the how-to repair manual, “How to Keep Your Volkswagen Alive, The Complete Manual for the Complete Idiot”, published by John Muir. The hand-drawn illustrations by Richard Sealy are as incredible as the animation in this video. Every VW enthusiast must have this great book!

[@timblount8111]

Agreed. I'm a mechanical engineer / car guy, and I bought Muir's book a decade ago just for pure enjoyment. I don't even own a VW and I can appreciate the Beetle and the book.

[@RCAvhstape]

My dad had that book, and also the follow on by the same author that dealt with the Rabbit/Scirocco water-cooled cars. Best maintenance manual ever written. Even had instructions for how to build a sandwich when you take a break from working on your VW.

[@quiklids]

The iconic illustrations for ‘How to keep your Volkswagen Alive’ were by Peter Aschwanden from the books inception in 1969. Richard Sealy wrote ‘How to keep your VW Rabbit Alive’ (also illustrated by Peter Aschwanden) and co-authored ‘How to keep your Honda ATC Alive’ with David Old for John Muir Publications.

[@slidingconstant]

I had a copy of that, too!

[@timvandenbrink4461]

I had the book back in the early 80’s.

[@yodab.at1746]

The vacuum advance system actually advances the ignition when cruising and the throttle position is nearly closed. The high vacuum in the inlet manifold pulls the diaphragm and advances the ignition as the mixture has leaned out at this throttle position (lean mixture has a slightly longer burn time).

[@stevehill4615]

Was going to say the same, but the vacuum advance aids engine acceleration from low rpm but large throttle opening until the engine speed makes the centrifugal weights in the distributor take over from the vacuum advance with the their operation somewhat overlapping.

[@yodab.at1746]

@@stevehill4615 that's the spring action countering the diaphragm (the diaphragm also has a spring in it). At wide throttle openings at low rpm you want the ignition to be retarded to avoid detonation (pinking), as rpms increase the centrifugal weights come into action and then as the throttle is closed off for cruising, the diaphragm is pulled to pretty much maximum advance. If the throttle is opened quickly (for quick acceleration or hill climbing) the ignition is then slightly retarded (vacuum drops, diaphragm relaxes) to match a richer mixture (from the accelerator pump). All this is computer controlled on a modern system along with injection quantity.

[@lbowsk]

The cam followers were SO crappy on the after-market point sets, that the engine was out of tune within 1000 miles. Of course, you could be new points for less than 5 bucks at Dart Drug, TracAuto, or anywhere similar. When it started to rev to the moon, you knew that the cam follower was worn and that the points were shot.

[@soilmanted]

@@lbowskWhatever distributor points I used tended to last about 50,000 miles. I simply adjusted them every 6000 miles or so. One adjusts their gap which tends to close up slowly as the cam follower wears down, and then one adjusts the static timing by loosening the distributor clamp and turning the distributor, using a 12v test lamp to see when the points open. I never had a problem with any points that I bought. Were they Bosch branded points? I think so. But they were inexpensive. After about 50,000 miles it was time to either file them down a bit to remove the pitting on one of them and the corresponding buildup on the other, or buy new ones. They were so cheap that there was no point in spending time filing them but you could if had wanted to. Also, you could buy aftermarket electronic distributors which did not have points and never needed adjustment. They worked with the original electromagnetic voltage transformer (often called simply a "coil").

[@peterduxbury927]

@@soilmanted Get rid of the Points entirely!! Fit a Pertronix Electronic Ignition System, which takes an hour. You will be extremely pleased with the starting, running of the engine, devoid of "flat spots" and the common misfires associated with contact breaker points. No more adjusting the Points Gap - or cleaning - not ever!

[@paoloviti6156]

When my late father married my Swedish mother, her mother bought him a VW around 1952, was fitted with the traffic lights that popped up and even travelled way down to Tuscany with my little sister as well. Well when I arrived and already decided that the luggage space on top of the engine was my saloon and I had a perfect view around with my toys and my much needed biberon/feeding bottle. Life was cool then 😎 and all I had to do was listening the lovely sound of the the engine to fall asleep! Thanks for sharing this very interesting video 👍 👍👍

[@edwardschmitt5710]

My sister and I always wanted to sit "in the well" as kids.

[@paoloviti6156]

My father bought in Sweden a VW around 1952 and I loved my "saloon" all for me with my toys with a nice view from there and very often sleeping there listening the lovely sound of the engine. This too had the traffic lights popping out! A cool 😎 car indeed!

[@shelbyseelbach9568]

Called semaphore signals, that is also what the flag signaling system for ship to ship communication is called.

[@paoloviti6156]

@Shelby Seelbach correct and curiously you say that also in Italian as "semaforo"..

[@pavloschatziergatis9464]

My father bought a VW 1303, with 1500 c.c engine, still exists this car .Are you Italian?

[@thomasfx3190]

I’ve built 50+ Type I/Type II motors, I still dream about them in my sleep. The sound is just lovely. My last one was an 1883cc with a few fancy bits. It made ~90hp which was great for my ‘71 Bus. The 6v to 12v switch was in 1967 not 1975 btw.

[@privatepilot4064]

It’s virtually indestructible and ingenious design.

[@westhavenor9513]

Well, perhaps in a cold climate. Having owned a 1970 Type 2 through the 1980's and traveling the California deserts and Baja California, it didn't like hot weather while being loaded with teenagers and camping gear. Still the best times of my life though!

[@kurkkobain]

@@westhavenor9513 they seized a lot becasue of hot wether and if yous tress the enbgine ina mountina, an carrying some cargo, and hot wether they seized due to heat my father solved that propblem, with an inventiona nd engine never seized gain,, engien was always complaining deu to hot weather in south of europe, and some stress, big voyages. My father made two mods and problems in engine desapeared.

[@paulorth2251]

This was the car of many young soldiers stationed in Germany over the years. A new soldier would buy the car off someone in the unit who was leaving. This hand off technique was used during all 4 of my tours in Europe. Greatest little car in Germany.

[@prosto_potomuwto]

The sucker would obey like a wife.

[@prosto_potomuwto]

Они все... совершенно одинаковы. Без индивидуальности. И как один лягут!

[@johnchandler1687]

My late friend, Al.bought 1 for $50 when he got to Germany in 1967 and sold it to the next guy for $50 when he shipped out to Viet Nam I'm 1968. Just in time to participate In the Tet Offensive party. Said it was the most fun he ever had with his clothes on.😅

[@waltthomas-s2d]

@@prosto_potomuwto So what? They were affordable to buy and operate at the time. They were/are a joy to work on yourself. Too hell with what the "capatalistic non-mechanical-idiots" driving their gas-guzzling-chick-magnet dreamboat cars said to belittle us! Never was I stuck in snow or owed the bank large monthly payments. HA-HA!

[@prosto_potomuwto]

@@waltthomas-s2d Why get rich, when you can just keep buying dirt? Professionals have standarts...

[@GeorgeWiman]

This is my favorite of any engine I've ever owned. My slightly modified Beetle would go practically anywhere. I never hesitated to drive it up a mountain fire trail to unknown places. And back in the '70's my father and I built a dune buggy with a shortened beetle frame. With total weight of around a thousand pounds and oversize tires, it seemed limitless. We drove it to Chaco Canyon, NM and explored ruins.

[@jamesquintana9137]

I have been driving the classic air-cooled VWs for the past 32 years, and will never stop owning one or more!

[@michaelmark2736]

You will when you can't find any parts

[@peterduxbury927]

@@michaelmark2736 THEN - you do what I have done. Fit a huge Battery Pack, and an Electric Motor. Car is now future-proofed. 100% reliable with little or no maintenance. Charge overnight, giving 160kM of travel for the next day. It suits a purpose.

[@Kloppin4H0rses]

​@@michaelmark2736 People keep saying that byt the VW air-cooled is one of the most supported engines out yhere. I find it easier to get aftermarket parts for my VW then I do my 2008 Kia Rio.

[@HANKTHEDANKEST]

Had a boss some years back with a 73 Type 2 and he daily drove that thing. One day he came into work all stoked--his mechanic had just gone over the bus and found that it was down 2 cylinders. Homie had been driving a FLAT TWO bus for months and months and months and he didn't notice. Mechanic brought the other two cylinders around and he drove that thing for YEARS more, every day, until selling it for gobs of money, because some people genuinely want to spend $16 000 on a 50 year-old, gutless rustbucket. To each their own, I guess? :)

[@mofbombay6290]

@blacknester 3 or less wheels on the road also !

[@jothain]

Your boss wasn't too bright fella? 🤣

[@WilmerCook]

That's because it was gutless.

[@keithammleter3824]

"Down 2 cylinders" most likely means the mechanic did a standard compression test. It is quite normal for air cooled VW engines to have little or no compression on test on one or more cylinders due to burnt exhaust valves from overheating. But during driving, the power output is nearly normal, as gas finds it hard to escape through a tiny gap. The main symptoms are not lack of power, they include a lot of popping and banging going down hill, being slightly hard to start, and rough idle.

[@peter-pg5yc]

Ill take my 20 year old rolla any day.. light years ahead..

[@HellsGuard]

I had a 73' beetle that I bought in 87'. I rebuilt the engine in 88'. In the summer of 89' I noticed higher than normal operating temps and the oul level was dropping. On a short overnight trip it vapor locked. Upon close examination I discovered the engine temperature sensor ceramic body was cracked that caused the oil leak and the overheating. Iwas lucky and found a new sensor replaced it myself topped off the oil, and it continued to run great. This was a great video.

[@jaxxonbalboa3243]

I was self taught and used to rebuild these engines back in the day and they were just fun to work on. I also owned a number of beetles and one transporter. In fact it was the transporter/microbus that I learned to rebuild the engines with. I was very young and newly married with no money and the Microbus engine blew. Couldn't afford to have it fixed so I bought a Haynes DIY repair manual and holding my breath through the entire process came the moment of truth...I turned the key and the engine started right up on the second try!. Great video, brought back many memories.

[@waltthomas-s2d]

Owned a six volt, and a 1971 superBeetle. John Muir's book gave my father and I the guidance to overhaul 4 boxer engines successfully! I built an electronic ignition and gapped the spark-plugs at 50 thousands and got 35 MPG with the radial tires. Used to change the oil every 2000 miles= once a month, and set the valves and timing COLD = overnight cool-off in the driveway; as per J. Muir's book recommendations. Great memories. Would love to work on them again. Thanks for an excellent presentation.

[@adamchurvis1]

As others have noted, this engine was once favored by homebuilt plane enthusiasts. Some of them even "halved" the engine into a two-cylinder setup, though I never saw a cutaway of how they handled that internally; I only saw it from the outside.

[@indigo196799]

They are still widely used in homebuilt airplanes. As well as the 1/2 vw. Many companies offer them ready to fly: Great Plains, Hummel engines...

[@russelldawkins9094]

@@indigo196799 I believe Burt Rutan powered his VariEze with slightly modified one producing about 130 hp and achieved a cruise speed of around 150 mph.

[@moriver3857]

Great video, and animation. Ver many years, I've built many of these great engines from 36hp to a mild 1800, and never ceased to be amazed of the clever and simplistic engineering. Properly built, it is bulletproof reliable.

[@savage22bolt32]

Constructive criticism: lose the background noise! The subject & narration of it is great. The addition of distracting, monotonous & annoying music ruined the vid for me.

[@louisvanrijn3964]

@@savage22bolt32 Somehow al video producers need a music background which distracts from the video itself.

[@louisvanrijn3964]

If not tuned above 44 hp it is a reliable engine. But : 44hp out of 1300 cc

[@davidkollar8328]

You did a really great video on the VW air cooled motor but there are so many modern modifications that companies are doing that have improved this little motor . I have a 1979 convertible that’s a 2180 cc putting out around 150 hp and I’m building a supercharged one for another car I’m working on .

[@akio2589]

There's a specific fan/oil cooler/shroud setup off a specific Porsche that's bigger and has better cooling that'd probably be better suited for that. You may know about it already. Problem with forced induction is it's hard to keep them cool.

[@davidkollar8328]

@@akio2589 Thank you for the suggestion I gave purchased a shroud called Cooled here locally and I was told it is a really good because it uses a larger oil cooler ( Type 4 ) and I’m also planning of running a separate oil cooler as well . Hopefully it will work well :)

[@akio2589]

@@davidkollar8328 If it's going to purely be a track car, then water/meth injection might be something to look into as well. Help bring down the cyl temps. An external oil cooler is probably a good idea. I wonder if it'd be better to go with a completely external fat oil cooler to get as much cool air flow as possible moving over the cylinders without the shroud oil cooler restricting airflow and adding heat? And still get the benefit of the better cooling shroud and bigger fan.

[@davidkollar8328]

@@akio2589 It’s just going to be a fun street car I already have an external oil cooler with a fan I bought for my chevelle that was just a little too small . My plan is to have about 5-6 pounds of boost and keep the compression a bit lower . I had everything balanced and running Chev rods . I bought 3 different pulleys for the amr supercharger if it doesn’t work well I’m not too deep into it to change it around till I’m happy with it . It’s still a few months away and more investment! lol

[@akio2589]

@@davidkollar8328 Fair enough, good luck with it.

[@johndoyle4723]

Very significant design, and yes it worked,simple and easy to maintain and overhaul. Thanks for the visualisation of the engine working parts.

[@cinemaipswich4636]

I have seen this motor on small trailers with a pump, or compressor, or welder, or generator attached. It is everywhere.

[@innerlight7018]

For me, the Beetle is primarily one thing: childhood! I still know the number plate of my dad's Beetle when I was 10 years old. I remember the smell, I know how it feels to open the glove box. The "Käfer" was a family member, like a dog. Reliable and always be there when you need him.

[@chrisdevalcourt648]

Wonderful memory!

[@theoldbigmoose]

Same here. Started with a 65 bug... still is my favorite car. So many miles on it, and so many memories made!

[@android584]

Used to be a regular sight on Australian roads in the 80s when I was a kid, sightings are rare now but some manage to live on as restored classics.

[@chrisdevalcourt648]

@@android584 as a kid in the 60s they were so common we had a game of yelling out "beetle bug" as we drove down the highway and saw one. May have only been for the red ones? Too long ago!

[@1gerard47]

My reg was DRY 132T.

[@mcbillygoat]

This is the best video I’ve seen in a while. That boxer engine looks spectacular.

[@RobertoRMOLA]

@00:20 and @02:36 a correction: Ferdinand Porsche DIDN'T designed the VW engine. The inventor was a young engineer called Franz Xaver Reimspeiss (who designed the VW logo, as well). The engine he designed was the 5th prototype (E-Motor) Porsche was experimenting. After being enhanced with an oil radiator it becames the basis for all the engines until 1959. @00:38 The crankcase was made of elektron (magnesium alloy), the cylinders was iron and heads was aluminum.

[@louisvanrijn3964]

That is correct. The crankcase was magnesium. Magnesium creeps, becomes distorted in time if heated higher than 100 Celsius. Long highway drives bring the oil temperature above 100C, so the most beetle engines become leaky over the longitudinal split joint of the crankcase halves. If not tuned, and maximum delivering 44 hp the engine is reliable though.

[@makoado6010]

and the car designed by barényi béla hunagrian engineer at 1927. prosche just stole his plans.

[@louisvanrijn3964]

@@makoado6010 Correct. Copy Modify Paste is a mark of human mankind. Copycat.

[@pistonslapuk]

There’s always one know it all….

[@andycumming262]

@@makoado6010 I was waiting for someone to point this out, ion fack the Nazi stole the plans for the entire car. As if the Germans could build something simple. VW paid millions in restitution.

[@wim1366]

I want to cry, i was a Volkswagen dealer at the time.

[@donovanferrari761]

The above average off-road capability wasn’t just due to its light weight. It was also because the engine was positioned at the rear of the vehicle, giving it a very good weight distribution for a rear-wheel drive vehicle. Most rear wheel drive vehicles at the time had the engine in the front.

[@peter-pg5yc]

ever drive one in snow.. excelerate car lifts then spins scary.. heavy part goes foreward makes for one scary time.. not enjoyable

[@eugenepolan1750]

It also had a relatively smooth underbody, so it could glide over obstructions that might hang up on other car's mufflers or crossmembers

[@kevinpulver4027]

​@@eugenepolan1750 I described the floorpan like a big cookie sheet!

[@fredfarmer1959]

@@kevinpulver4027 I never thought of that but it really was. I once went across a flooded bridge like skipping a flat stone over water. It was dark, headlights weren't great (6 volt), didn't know what happened until I was on the other side. I think any other type of car would have drowned out when water hit ignition wires.

[@42468]

the 3-speed "autostick" transmission is a really interesting solution. It was brought to market to compete against the three-speed slush boxes that were starting to become popular in the late 60's. designed to require little additional engineering, it used the same gear ratios as the 4-speed manual, with the manual transmission's 2nd, 3rd, and 4th gear becoming the autostick's "low", 1st, and 2nd. it's not really an automatic, but something in between a manual and automatic. while it had a torque converter (like most automatics), it also had a clutch that had to be activated by the driver. this was done by putting a switch in the shifter! as you would put force on the shifter, it would go down and click a button that would activate a solenoid. this solenoid would connect a vacuum booster to the intake manifold, which would then pull back on a lever attached to the clutch. additionally, the ATF pump for the torque converter was run off the same shaft as the oil pump. it was an interesting and cheap engineering solution that we've never seen anything like since. (It did sell poorly. The half-manual-half-automatic aspect of it didn't satisfy drivers who were used to driving a manual gearbox, and was still too cumbersome for people who liked driving automatics. Most autostick beetles have been converted to manuals).

[@nelsonphilip4520]

Wow! At the very least it may have been a marketing ploy for VW to advertise that they had an "automatic" to offer the buying public. And from what you describe the engineering behind the auto trans compliments the simplicity of the engine architecture. Thanks for taking the time to post.

[@chrisdevalcourt648]

I saw one that was automatic and had ac added! What a dog!

[@Gottenhimfella]

I have on which was never converted. Maybe one day it'll be worth something!

[@williamharris8367]

Thanks for the very clear explanation of how the transmission works! Here in Canada, at least, they were badged as "semiautomatic"; there was a special chrome name on the rear. When I was in High School I badly wanted a Beetle, but I could not (and still can't) drive a standard transmission. I only ever saw a single semiautomatic for sale in my city. Sadly, my parents wanted something more modern/safer.

[@cdmcl3]

not trolling--but you might want to find out how the designer pronounced his name! that said, this is the best review of the VW engine i've seen on youtube! graphics and voiceover, and a few old clips--i get emotional! my first car was a blue 61 with big old cloth panoramic roof. those were the best days behind the wheel for me....

[@PrimoStracciatella]

I assume you're talking about the pronunciation of the name "Porsche" - with two syllables and an "a" (like in "above") at the end.

[@LOVEBABY138]

Emphasis on the sch/sh and the E its an loud and staggering E. Porch;Posh | Poashe. Poache (P-O-R-S-C-H-E)

[@PrimoStracciatella]

For English speakers it's simply "Portia".

[@chrisdevalcourt648]

Have a great joke about the man who wants his porch painted and ends getting his car painted .

[@RCAvhstape]

My dad drove a 73 Super Beetle for many years, and took great care of it. It had no rust issues and ran like new. For a long time after he sold it he regretted getting rid of it. Even worse, somebody local bought it off the used lot and my dad often saw his own car around town being abused by some muppet. If he had kept it, I'd probably be driving it today.

[@peter-pg5yc]

Funny I had 1973 sun bug best one by far. sold it saw it again laughed heartily..I was now in a 1982 rabbit gti, i never looked back on that bug. i was light years ahead in an ac car.. 10 years...

[@dstarfire42]

Thanks for the great video. I really appreciate that you explain the benefits and design philosophies behind the engines various features. That makes it great for the folks that folks that don't know much about cars, and but are a little bit curious about everything.

[@repairman22]

Thank you!!!

[@TheGreatDrAsian]

Surprising no mention of Formula Vee! They take these engines and other parts from the Beetles and use them to make open wheel race cars! Very cool entry level racing available to basically anyone! So cool to know more history about the engine, thank you!

[@thepinktreeclub]

yep, they're very popular here in brazil, and in my state (literally the poorest), formula vee/formula 1600 are tied in the 2nd place most popular motosports category here, the first is definetely illegal rally lol

[@bertramlrezenet9311]

Fantastic video! I was blessed with the opportunity of owning and driving a F/V (Formula V) in the late 60's. Nothing like moving at 100 mph down the straightaway, propelled by a 40 HP bug engine. I remember, once we rebuilt the engine overnight for a Sunday race. Those were the days... 🤠

[@fidelcatsro6948]

wahhh that thing achieved 160kph?? are u kidding me?

[@kens.213]

Maybe that was 100kph? A stock 40hp VW Bug was good to about 75mph, maybe 80mph with a big bore 1300cc kit installed. I know, I've built them all in my 75 years. From 25hp to 2110's, stock and fire breathing 2110's with dual Weber 44IDF's, and everything in between. Cheapest HP was a 1600 based 1835cc with a pair of Kadron carbs, good for maybe 100hp .100-.125" fly-cut heads for decent compression.

[@chrisdevalcourt648]

@@kens.213 formula V was not a vw body at all. It had the look of an indy car body but fitted with a stock VW engine.

[@kens.213]

@@chrisdevalcourt648You lost me, where did I mention Formula V?

[@chrisdevalcourt648]

@@kens.213 sorry. You didn't but Burt did when he mentioned the speed he was able to achieve with his 40hp formula V. True that speed wasn't possible with the bug body, but I believe it was with the formula V car body. Sorry for the confusion.

[@speedomars]

I built dozens of these things. they were elegant, simple and you could pull one with just a floor jack. 4 22mm bolts kept it attached to the car.

[@e-curb]

M10

[@andynicoll8566]

Or in my case, three bolts and a stud up in the hard to reach back corner, lol. Never had a problem with only three bolts holding the engine in. One of my bugs had the back panel cut out and held by a couple of screws. Didn't have to jack the car to remove the engine, just pulled straight back. Motor swap in about an hour or so. Ok maybe a bit more for hooking everything up. Bumper? What bumper lol?

[@scotthibbs]

Totally right. The top right passenger bolt was affectionately called the "b*tch bolt" and it never went back in.

[@e-curb]

@@scotthibbs That one is no trouble for me. It's the one on the top left that's hard to reach.

[@scotthibbs]

@@e-curb It's been 30 years - I believe you're right!

[@timking2822]

I was a young engineer in Detroit at one of the Big 3 OEMs in the early '70s. I remember following some older engineers into an SAE presentation at COBO Hall where one asked what a foreign manufacturer could teach Detroit? Well, I guess they've learned.

[@chrisdevalcourt648]

@H K affordable and simple. The people's car! In its time.

[@chrisdevalcourt648]

@H K sadly! The way of the world!

[@peterduxbury927]

@H K Just had to reply back! You said that many modern cars are plastic. The worst step that any Car manufacturer could make, was the use of plastics for the water-cooling. I had a 16V Polo. It had a "hidden" Coolant Leak. I was topping up the coolant for 3 years. Believe me when I say that VW created a Molding for the Polo, carrying the coolant, and I discovered a pin-hole leak between engine and Firewall. Examination of this part (plastic) revealed that the Coolant had dissolved the interior of this plastic manifold. This would not happen readily, with coolant inhibitor, and a suitable metal casting. My '71 Super Bug has had an EV Conversion in 2019. It has been 100% reliable, even in torrential rain and flooded roads. This action really future-proofs many classic cars. If governments decide to place a complete ban on ICE vehicles, (being talked about now), then this is the way to go! In the 60's it was nice to see wood, chrome and leather, on many Jags, Rovers, Mercedes. It's not only the plastics that fail on modern cars, but the sophisticated electronics that send many expensive cars to a premature early grave. I wonder if the latest Rolls - or Ferrari use plastic on their engines, which suffers failure like my 16V Polo did?

[@peterduxbury927]

@H K I have to agree 100% with you! Long before ISO and Quality Assurance, the Beetle was manufactured to strict quality. The workforce had pride. My Beetle is almost 51 years old, and I marvel at the way the doors close, with a hefty "clunk". Years ago, one early Beetle Ad that was televised, the words were: "If you want to close the door on a Beetle - first slightly open a window". There is a Beetle here in Australia, that sailed under the Harbour Bridge. They are well-sealed from new. Also check-out the gauge of the steel that was used. Many cars today can get dented easily because the car manufacturers aim for light-gauge metal, saying that a lighter weight car can travel further on a gallon of gas. I would much prefer a heavier gauge body - just like the Beetle was made. I will never own any other car. The Beetle is my 'life' car! It is a silent member of the family, and gets immediate attention should something need attention.

[@brianchisnell1548]

@H K Don't run hot and heaters work great if in proper order. 20,000,000 people bought a car that didn't work properly?

[@PlaywithJunk]

And don't forget the millions of industrial VW engines. They were exactly the same Beetle engine but with a magneto ignition. They were used everwhere, compressors, electric generators etc

[@nonelost1]

My dad's air-cooled VW's were a '60 bug, a '61 Karmann Ghia, a '64 bus, two '71 square backs, and a '72 square back. His water-cooled stable included a '76, a '79, and an '82 Rabbit. My bugs were a '61, two sunroof '62's, a '63, and a '66.

[@johnspathonis1078]

Our family drove a 1954 VW and I later used it to drive to university. First gear was crash but synchro on 2,3 &4. I believe that 1954 was the first model imported into Australia. 1100cc with single exhaust pipe with super small oval rear window. The panels were very strong. The handbrake adjustment was up front between the two torsion bars. Everthing was greasable. Indicators were solenoid activated arms which swung out of the B pillar. Fuel tank was 8.8 gallons with a foot activated spare gallon as there was no fuel gauge. As soon as the engine started spluttering the lever was swung over by 90 degrees with the left foot. 6 volt battery under right rear passenger with very dim headlights. Very reliable car.

[@johnd8892]

Did yours have the accelerator roller wheel instead of a pedal as my mother's early VW did. There were some earlier ones in Australia with the rear split oval window and even a hand crank hole to start the engine by hand. Might have been private imports but saw one of these in my suburb of Melbourne. I think the Australian Army brought a 46 model in for evaluating to help decide if the Australian government should take over VW as proposed then.

[@johnspathonis1078]

@@johnd8892 Hi John. Yes the accelerator pedal had the roller. It had the 6 volt battery and dim headlights. First gear was a crash gear.

[@josephbingham1255]

I drove a 1967 Beetle as a daily driver for 20 years about 600,000 + miles as I kept a log. A decent engine would last about 100,000 so. 1. The fan belt must be kept properly adjusted. If it flies off it often knocks of the fuel line over the distributor resulting in a fire. 2. The valves do not loosen and rattle - they tighten. Proper 3-4000 mile adjustments are critical to avoid a "whistling sound" followed by a burnt valve. 3. Engine compartment rubber seals need to be in place to avoid hot air from the cylinders recycling back up onto the cooling fan (4:44) shows an unsealed engine compartment. 4. Fuel pump hold down nuts slowly loosen. A special shaped 13mm is needed for the hard to reach one. Mad Magazine once said American needed more dependable, affordable automobiles and needed to retool and bring back that Great VW. The illustration showed a factory with VWs having a Chrysler star where the VW symbol usually was. A very nice video on those great ol' VWs!

[@bryanlatimer-davies1222]

Pretty much my experience with a 53, I always set the valves a little loose especially on #3 as the oil cooler blocked some of the cooling air flow, spot on with the plug seals too!

[@josephbingham1255]

@@bryanlatimer-davies1222 I knew about the #3 but didn't mention it as there was nothing you could do about it except a little looser valve adj. as advised in The Whole Earth Catalog? as I recall.

[@bryanlatimer-davies1222]

@@josephbingham1255 John Muir covered it in his book as well, but I think most dyed in the wool Bug owners knew about the issue.

[@jerrymcgeorge4117]

I still have the curved special wrench for the fuel pump and muffler nuts. I must have overhauled 100 of them as a VW tech back in the 70s. Great little cars!

[@soilmanted]

Service literature called for adjusting the valves every 6000 miles, at every other oil change. Sparking plugs at 12,000. The valve lash tends to increase maybe 0.001 or 0.002 inches each time, except at around 85,000 miles at which point #3 exhaust valve, the hottest-running, stretches and its guide wears. I am not sure why the lash generally increases. Perhaps it is just wear on the valve stem end from being smacked by the rocker arms. Or maybe it is wear on the lifters, or rocker-arm push rods. I'm not sure. I've done valve jobs on maybe 10 or 15 VW air-cooled engines. The valve seats and valve heads always seemed to have very little wear. Wear on these would decrease the valve lash but I never saw any serious wear. The valve stem of #3 cylinder, would get narrower, and longer, starting at about 85 0r 90,000 miles, causing the valve lash to decrease at that time. That's how you know it's time to overhaul - before the valve stretches into 2 pieces, and the #3 cylinder "sucks the valve." While I always overhauled the whole engine, From looking at the piston rings, and measuring the pistons, cylinders, crankshaft bearings and rod bearings, I believe they could go 200,000 between overhauls, if not more. .That's assuming you changed the oil on time and used the correct type and grade of oil.

[@ahsimiksnabac6576]

as a teenager in 1960's Frisco, i owned over a dozen different VWs, everything from miniVans to 911 porshe, from 800cc to 2L engines, and must have rebuilt 20 VW engines from the crankShaft up. at the age of 70, i still have dreams about my VW life history. by the way, ur graphics were FANTASTIC!!

[@NoahSpurrier]

I had a ‘66 1300cc Beetle. Great car - last year of the tear drop headlights. One time I was driving my ‘66 Beetle in San Francisco and I hear a loud bang. The engine was still running, but it was shaking and running rough. I managed to get the Beetle off the street and into a parking spot. Later, I had the Beetle towed to my favorite mechanic, Nick. He’s taking it apart and looking at it. He says in a fake German accent, “Yah! Here it’s zee problem! One of zee valves has broken off and punched straight through zee piston!” We tried to find a replacement piston and one parts dealer just laughed and said “You’ll never find pistons for a 1300cc Volkswagen engine. They only made that engine for one year.” So what are my options? Not much. Custom pistons were more expensive than a new engine. So, I bought a new 1600cc engine. Nick and I installed that engine. It was a nice upgrade, though it would have been cooler to keep the ‘66 Beetle stock, but since we were going to alter it anyway I had him lower the suspension and install disc brakes. The disc brakes were actually the best upgrade. The new brakes were way better than the stock drum brakes. The lower suspension made handling better, but rough. Later, I was driving around with my girlfriend - one with big boobs. She complained that she needed to wear a sports bra to ride in my car. Ha!

[@shelbyseelbach9568]

First car was a '66 when i turned 16 in '89, second was a '73. Man, i still miss them and think about them very often.

[@MadMax-cw3pn]

Amazing donks. I once seized my 1600 on the Nullarbor after the engine breather blocked pushing out the dip stick and all the oil. It bent #4 conrod snapping off at the crankshaft around the main bearing cap. I purchased a second hand con rod and replaced all the main bearings. Flushed the engine with fresh oil and that motor did another 30,000 kilometres and run better than new. Eventually the crank shaft cracked in half but still managed to get me home 400 kilometres like this. No other engine comes close to the simplicity of the VW boxer. If they had a diff lock they would be unstoppable. I used to drive my 74 VW camper 1000 kilometres one way to work in the gold mines and another 1000 Kilometers home for RnR.

[@kurkkobain]

they seized a lot becasue of hot wether and if yous tress the enbgine ina mountina, an carrying some cargo, and hot wether they seized due to heat my father solved that propblem, with an inventiona nd engine never seized gain,, engien was always complaining deu to hot weather in south of europe, and some stress, big voyages. My father made two mods and problems in engine desapeared.

[@keithad6485]

diff lock. I know what you mean. I considered putting two hand brakes on my beetle one for each rear wheel so that if one drive wheel was spinning in mud, i could brake it and drive out with the other wheel. They are unstoppable. and so light. 750 kgs. Looking at buying a 1976 beetle which has been stored in a shed for over thirty years. just needs front seats which are no where to be found.

[@cocodog85]

with a few modifications, the vw engine make a great light air plane power plant. a testament to it's bullet proof design, one of the greatest engines of all time.

[@tamegaming1768]

This is such a cool way to explain how an engine works. I always was under the assumption the beetle engine overheated the oil but that's actually a cool design

[@dmoore5120]

I used to add a soda can propping open the deck lid (held by the latch) on my 57 -good for 10 mph top end or 10 C cooler oil ...

[@StephanieElizabethMann]

Many years ago a friend and I were at a friend's garage. He had mounted a vw motor into a BMW R60 bike frame. He said it went very well but needed better brakes.

[@ronkirk5099]

Back in the day, I drove a VW beetle('67), and then later, three different Transporters('68, '69, '72). The vehicles had good fuel economy. but sadly no modern pollution control devices so they were pretty dirty. Over the years, I did three engine rebuilds myself with the machine work done at a local shop. You could remove the engine in < a couple hours using only a floor jack. The only modification I did was removing the engine oil cooler which partially restricted air flow to the number 3 (?) cylinder and installed a much larger external oil cooler.

[@mystified1429]

Interesting mod. there

[@alecbruyns4490]

I had a couple of the beetles, then a '71 bus. The 1600cc engine was strained in that, and required frequent valve adjustment, especially to #3 cylinder. It also required the valves to be replaced every 50,000 miles, or risk one dropping in the cylinder. But I loved that bus ...

[@chrisdevalcourt648]

They all required frequent valve adjustments because of the insufficient cooling of the air cooled engine. #3 cylinder always ran hottest because of its position receiving the least air flow and air that is already warmed by passing through the upright oil cooler in the fan shroud. I think in the 70's VW started offsetting the oil cooler in the fan shroud to aid cooling to the 3 and 4 cylinders. VW was aware of the overheating problem with #3 and buildt several degrees of retard in the distributer to help reduce the overheating problem. We were aware of this back in the 60s. Yes simple and reliable engine as long as you keep the rpms down and drive them in cooler weather. They were popular. The people's car! And the hippies loved them too. Not good to be topped out on the interstate at 70 in the heat of the summer on Texas highways! Yet they did amazingly well!

[@davesieg520]

@@chrisdevalcourt648 Amen, Chris, With shadetree-mechanic experience on both 1964 and 1970 models, I appreciate the training I got keeping the valves adjusted. Not quite enough adjusting to prevent #3 exhaust valve from being swallowed in hot weather with highway revs. Installing a kit-built high voltage CD ignition system sure cleaned up cold winter starting problems in Idaho & Michigan. I can't forgive the oil cooler in the airstream for #3 cylinder. That reputation for reliability just made me crave water cooling when I was stranded.

[@chrisdevalcourt648]

@@davesieg520 good memories Dave and you learned a lot! Including that water cooled was the way to go! In the 70's we had a customer who had a older VW ask us as to what type of car to buy. She was very disappointed when we didn't recommend a VW. She asked why? You work on them she said. We told her they are great cars to work on but they are not reliable for driving on high speed US highways. Don't remember what she ended up buying?

[@peterduxbury927]

@@chrisdevalcourt648 Back then, most probably an AMC Pacer.

[@chrisdevalcourt648]

@@peterduxbury927 not sure. It was the early 70's. Was the pacer in production then? We probably recommended a Toyota, Honda, or Nissan at the time. They were really reliable at the time!

[@georgecurtis6463]

Yup, having worked on them plenty enough, I still consider this engine the best ever. Runs forever, easy to maintain, easy to fix or overhaul or rebuild. As long as folks took care of the basics, you were good to go.

[@edwardschmitt5710]

You had to know how to adjust the valves. And the dreaded ticking, as Muir said in the famous book "Like a rattlesnake about to strike"....I pulled over on a busy Jersey City Highway, jumped out, removed the valve cover, and got that valve fixed on the spot.

[@georgecurtis6463]

@@edwardschmitt5710 make sure you look closely at the rocker arms and cam lobes for wear.

[@chrisdevalcourt648]

@@edwardschmitt5710 surprised you could with the engine hot! I'm pretty sure the valves are to be adjusted with the engine cold.

[@garypeatling7927]

Have seen them do just about everything bad , cams go , heads crack , valve seats go , valves go , exhaust leak fumes to heat car only last so long because make so little power , I'd say a B series 1500 is a much better engine all round

[@georgecurtis6463]

@@garypeatling7927 most all issues I saw were due to abuse or neglect. Granted the later engines were a bit better. But still, all I saw could have been avoided. The biggest issue was not keeping the engine to body seal in good condition.

[@CuzBarnaJuner]

Number 3 cylinder often had problems because airflow was affected by the oil cooler placement. During a rebuild I would often see cracks in the cylinder head between the spark plug opening and the valve ports.....

[@karlreinke9653]

Very true about cylinder 3. Actually the exhaust valve,it ran hotter than the others. My 70’ was awesome $1995 delivered to the house.

[@adolfodelagarza4934]

In 1963 my dad bought me a 1959 beetle. It had 36 horse power. The mechanical valves, brakes and clutch had to be adjusted every 2,000 miles. The VW dealership charged $16 for the adjustment with oil change. I delivered 350 college newspapers every morning for two years. I wish that I had kept it.

[@chrisdevalcourt648]

Good car and a smart dad!

[@highwayman1218]

Had a couple as a kid in the 80s.... 68 Cal Bug w/1776 and single progressive. 69 Cal Bug w/2180 and dual Webers.... Loved those cars and now I'm a 50 something, I would love to get back into the air cooled V-Dub scene again!

[@newzealandfortrump]

My father had a beetle in Africa 50's when the roads were at best dirt tracks .... on many occasions he loaned his car to people who's cars were unable to get to where they wanted to go. Brilliant car.

[@donjones4719]

When I was a teen the family cars were a Bus and a Squareback. Ah, the Squareback, a hatchback ahead of its time. It was so cool that the engine fit flat under the floor of the cargo area - and of course there was a frunk. I learned to drive on the 1970 Bus. My two brothers had learned to shift a manual on it, so let's just say the clutch was very broken in. With that little engine, getting up a ramp onto the interstate was a challenge! We got the Squareback soon after that, so to me it was a sports car, slung low to the road.

[@andynicoll8566]

Remember the basic rule of thumb, if the tappets aren't clacking they're too tight!

[@0guiteo]

I had 5 VWs - 2 Karmann Ghias, 2 busses and a Squareback. I haven't bought another VW since they went to water cooling. Those were such great cars, and I could fix them with the Haynes, and Clymer books as well as John Muir's "How to Keep Your Volkswagen Alive". The engines were bullet proof, but the heater(s) stunk for cold weather. I had all but one while living in Hawaii, so it didn't make a lot of difference, but when I had a bus in Denver - it was rough in the winter.

[@chrisdevalcourt648]

Bet that was rough in winter! The bus used the same heat exchanger junction boxes as the big. They barely heated the bug much less the bus

[@averdung]

1987 Europa edition 2, 1994 Firebeetle, 1999 Unificado. The best summary of my VW experience was done by a cousin of mine who traded cars of every marque... "I have never seen someone drive a Volkswagen like you". People swore never to board a car with me at the wheel again, and they have kept their word for 30 years! Disc brakes (from 1995 in Mexico, retrofitted) made the best car ever made even better, and gave me the confidence to fully exploit the low-end torque and better response of the 1600i engine (75 mph [120kmh] average highway speed, decent power sliding/cornering, trouncing all 4/6-cylinder engines at stoplights, all this at 2240 m / 7341ft) and, of course, going where Jeeps feared to tread and driving on in the rain when tractor trailers had to stop (4 big rally lights & high-power bulbs helped). I still dream about my first VW, conqueror of all Mexico, scourge of the Ejes Viales, a car with a "low compression" AF engine that won me another car in a timed bet in the wild streets of Mexico City. Even the darkest den of VW haters, Top Gear, surrendered to the VW's greatness after crossing Botswana. That says it all.

[@troypol343]

used to have a '69 and '72 Beetles as daily drivers. Fun little cars.

[@TheSonicfrog]

A masterpiece of design engineering. Simple, efficient, easy to maintain.

[@georgeeads8689]

My first car was 1967 beetle. I loved that car. I wish I could find another beetle that was affordable.

[@foppo100]

I know that engine had 3 Beetles all well over 100 thousand miles and when I sold them still going strong;Mine were the 1200cc the best one was the 1500cc.Then in the later engines emission control and more crap to the engines started.The orginal was good enough.I used to adjust the tappets set the timing with a static light.Fantastic flat four little engine.

[@ericknoblauch9195]

My father had two VW's. One had the 1600 Dual Port engine which was junk. The 1500 on the other hand was very reliable, and ran forever.

[@kentGrey]

Honestly, your video made me want to go buy a classic beetle. Thanks.

[@marco1173]

I once drove 1000 km on my '74 VW Sedan (Beetle) in the heat of the dessert and through mountain ranges. At some point it went over 3 hrs with the gas pedal all the way to the floor, hitting about 120 km/h on a few downhills. I experienced brake fade and nearly wiped out on more than one occasion. When we finally had to stop to refuel, the engine shut off and refused to start again. I thought I killed it, but it finally did start after it had cooled off for a bit. At some point it was using way more fuel than it should have, so I went to open the engine bay and found the fuel line had developed a leak and it was dumping fuel all over the engine. It was a miracle we didn't go up in flames. Finally, a few miles before our destination, the whole muffler fell off and a few days later the clutch cable snapped. I asked my dad to come tow me and he tied the front bumper to his big ole Dodge Dart, went to get rolling but he took off way too fast and he ripped the bumper right off my Veedub. In the end I ended up selling it for parts, but I'll never forget that car. It was my first car.

[@emmettbrown6418]

They also float. Once I accidentally drive into a flooded part of the road. The wheels l didn't touch the ground in the deepest part, but It just floated to the other side and I was able to keep going. Using the compete idiot book, I was able to keep mine going all through college and kept it a few years after I got a real job and was married. Great car.

[@shelbyseelbach9568]

In perfect condition they float. Neither of mine would have floated when I owned them. LOL.

[@unclemarksdiyauto]

I had a 69 beetle back in the early 1980s. I was pretty abusive to it as a teenager and finally it dropped a valve. It was a good car. Maybe one day, I will own another one, but I will be gentle this time.

[@fidelcatsro6948]

too late to repent!

[@chrisdevalcourt648]

Wisdom comes with age! When you are young and dumb you are just.....

[@lounar482]

Had a "66 Bug back in HS. Sent a push rod through the case. Bought a short block from a repair shop for $300 and me and my brother installed it in our barn. The biggest issue I had with it was gas accumulating in the oil. I would gain about a half a quart of "oil" in the winter cause the thing just would not run hot enough to keep gas from condensing in the cylinders. Tried everything I could think of but could never stop it. Still, loved my bug.

[@iansloan5414]

For what it's worth (I'm sure it's too late) the bakelight base used for the fuel pump was probably cracked. This is a common problem for these engines

[@chrisdevalcourt648]

@@iansloan5414 that was what I was thinking...a fuel pump problem? No other way to get gas in your oil I think. Amazing it didn't blow up on you!

[@reverendjimjones9061]

@@chrisdevalcourt648 thats minor, lol, a gas jockey filled my 72 type 2 engine with gasoline!, it never caught fire on a short journey home but i saw a few flame outs in side mirror, oil cap was off in eng comp, pulled the dipstick and it was soaked to the top, lol, dumped oil, filled with kerosene, ran it a minute, refilled with oil and all was ok.........

[@chrisdevalcourt648]

@@reverendjimjones9061 that's certainly a way to get gas in your oil I hadn't thought of! Probably a young kid! Haha 😂! I was young and dumb once (or twice) too!

[@scotnor]

My very first car was a brand new 1961 VW with 40 hp. I bought it for an automobile newspaper route for the Oregonian Newspaper. I drove it 128 miles per day for six days a week,starting at 2 AM from Chehalis, WA to Aberdeen,Wa and back to my home in Centralia. My local VW shop owner told me that the bug needed strengthening in certain areas because of the heavy loads it would be carrying on a daily basis. So, we(he made me do most of the work while he supervised) installed a Transporter clutch and throw out bearing, re-torqued the rear suspension from 900 psi to 1200 psi and installed a Porsche transmission. I put approximately 42,000 miles on it in eight months, all while full time in college and getting my private pilot’s license. Did I mention that my girlfriend lived 22 miles from my house? Amazing what can be accomplished when you’re 19! The Bug never missed a beat, best car I’ve ever owned.

[@airbrushken5339]

In the late 60's I had a VW Camper, after in the 70's I had to drive 43 miles each way to work in Michigan... SNOW!!!... I converted my older VW to a Baja Bug with a fiberglass kit... also added Chevy Rim adapters ... some big Snow Tires ... headers and a "Weber Carb" ram induction manifold. I could climb snow banks and in 7 years never missed a day of work. Sold it to one of the mechanics at work and bought a Chevy ... till this day I miss that little bugger, it was fun to drive in the snow or off road and the horse power increase helped a lot!

[@outdoorfreedom9778]

I have built those little engines from 1776cc for street use to 2180cc for sand rails. The most common was the 1835cc. The engine and trans are amazing works of art!!

[@joeo5738]

I had a type 3 engine that was built to 2300cc. Stroker W/100mm jugs. What a beast. It was in a sand rail/ buggy. Tranny was built also w/514 gear.

[@ATruckCampbell]

Interesting you say that, after seeing this video I am considering using it in a go kart/buggy project.

[@paulhudson4254]

Had a ‘69 bug, loved it, miss it. Today we need another affordable “people’s car!”

[@adrianboshoff1582]

I was saying to my daughters last week... Why could they not keep this best engine of all time... Our family had 3 Vw Beetles and we never ever broke down or over heated... I hope a car manufacturer brings this type of engine back soon as not everyone will go for,the EV vehicles. 😎♥️

[@indigo196799]

They unfortunately cannot come back as is. Too much mods to bring them up to standard for emission control.

[@scotthibbs]

I hate that this is the case. It was quite erganomical and efficient for it's time. For example, the "air filter" was moving air over old motor oil to remove dust, the exhaust system captured heat for the cabin, wiper fluid used the spare tire air pressure, the circle design was sturdier and used less metal, not to mention really good gas miliage. I'd argue my previous 73 Super Beetle was better for the environment than my current EV considering all the mining and manufacturing it took just for the batteries, plus the energy from my coal power plant.

[@Ezz800]

@@indigo196799Well, not exactly, because Porsche bought back the flat 4 in the 718. They sound lovely especially when the turbos kick in, although they’re water cooled.

[@kavanghia6908]

I have had 11 different VW's over the past 43 years. Now I have my first Ghia!👍✌️

[@kaveerman]

Thank you for creating this video. The VW air-cooled boxer was further developed beyond 1600 cc limit for the Beetle. In 1969 the VW 411 was released with a new casting displacing 1.7L, and with the later renaming c1972 the VW412 came with a 1.8L. Most export models were fuel-injected. They were pancake engines (like the Type 3) with the engine fan at the end of the crankshaft, instead of mounting overhead as was done with the Beetle configuration. The 411/412 air cooled engine was also used in the Porsche 914, and in the Type 2 Bus and subsequent Transporter (Vanagon in North America) until c1983 when the wasserboxer (water cooled) version was introduced. The boxer configuration was kept until the end of the Vanagon run in 1991. On another note the Beetle came with 12V electrics in 1967, at least in Canada. My brother had a '66 Beetle with 6V that required a lot more push starts due to the weaker electrics. Mine cost Cdn$300 when bought used in 1979. Unfortunately the floor caved in within a year or so, due to rusting, and I bought the (then) luxurious VW412 station wagon (variant). In 2003 we rented a brand-new classic Beetle on a family trip to Mexico. I was soon aware of the limitations of the vehicle design in regards to acceleration, cornering and braking - but much of that could be blamed on the lousy tires. However when we rescued a family from a nearby town, I drove back to our hotel with four adults and five children in the rental Beetle. Crammed but amazing.

[@LucasOliveira-dm8mb]

Aqui no Brasil esse motor foi fabricado até 2005 na Kombi e já vinha de fabrica com injeção eletrônica

[@LandNfan]

Great engines in great cars. The first car I owned was a used 1964 Beetle. My first new car was a 1968 VW that I drove off the lot for a nickel less than $2,000. Fun, quirky little cars! I wish I still had that ‘68.

[@chrisdevalcourt648]

The good ole days!

[@peterduxbury927]

It must have been a real thrill to drive a brand-new '68 Beetle from the Showroom Floor! Even 50 years later, many do not have rattles or squeaks!

[@chrisdevalcourt648]

@@peterduxbury927 very limited use of plastic back then unlike today!

[@LandNfan]

@@peterduxbury927 a great thrill coupled with a bit of anxiety about paying for it on an E-4’s salary. It was my last year in the Air Force.

[@peterduxbury927]

@@LandNfan TRUE! Back in 1968, I loved the look of a Beetle. Like you, I couldn't afford to buy one because they held their value quite well. I bought crappy Austin 1100's and Hillman Minx - all rotten underneath. I rarely managed to get any of my old cars through the MOT back then Lol! Today, I have owned a '71 Superbug for 20 years. Now converted to EV, with A/C thrown-in. Beetle was purchased as a burnt-out wreck from a scrapyard, it was gonna get crushed. Today, after a lot of hard work and costs, it looks like an almost new Beetle, in Alpine white, wedgewood blue leather seats......... I will never own a modern (plastic) car again. Best bit of all, heaps of power with 178 ft lbs of torque, and revs to 8K.

[@draintheswamp1588]

Back in high school I bought a 1958 VW bus with a sliding hardtop for 50 bucks from a friend of mine. It kept popping out the exhaust and bad misfire. Took the engine out and took it to my auto shop and we all split the case and tore it apart and never got it fixed. Now I know I could have snapped those heads off in 20 minutes and put new heads on it. I'm very disappointed in my auto shop teacher but he's probably been dead for 30 years, lol.

[@andynicoll8566]

Ya that's a shame. Worst case you could've swapped the core for a rebuilt, they were pretty cheap back then.

[@vicentedacosta]

As owner of a 1600 aircooled microbus and ex-owner of a 1500 and a 1300 beetle I think your's is one of the most complete and easy-to-understand videos about this motor I've seen so far. That's what KZbin should be all about. Tks for doing it and sharing with all of us! Liked and Subscribed

[@DenUitvreter]

Bit of shame it missed the huge advantage of aircooled, it's weight. Which allowed for putting it behind the rear axle, that did not only save space and let one leave the heat noise behind literallly, it also made them great for off road.

[@goldenroux612]

My #4 valve burned out in San Diego. My roommate showed me how to replace the heads. I think it was four bolts to uncouple it from the transmission. Used a floor jack with a wood block to drop it down. Put motor onto a skateboard and rolled it into the garage. The hardest part was finding a torque wrench to put the new heads on.

[@minjiigo]

You know, even though most of this information weren't new to me (the beetle was the most common first car here in Brazil all the way up to the 90's), you presented it in such a nice way that even make me want to own one again (believe me, I know there's a lot of great things about this engine, but the Brazilian versions of it - with 1600 and 1700cc - were a nightmare!!). One more thing out of curiosity: what software(s) do you use?

[@alecbrown66]

The vw beetle engine has a huge history and ancestry. It started life as the bmw twin cylinder motorbike engine. After the war, they basically joined 2 of the motorbike engines together, focusing on the simplest connections. Obviously porche used it in all their cars, which evolved along with the 9 series. The citroen 2cv, and later the visa used the same engine, as did early peugeots. It's an interesting fact (learned from my father who was a mechanic in the 50's and 60's) is that the engine only has 4 attachment points, and dealerships often found it quicker to service the engine by removing it and swapping it with a spare that had been serviced and stored. People often think that the engine was slow, owing to the low top speeds of the beetle and 2cv. However this is wrong, as being basically a motorbike engine it had a huge rev range, so although incredibly deafening and taking a while, both cars could reach 70mph and once there keep going all day.

[@DrakeN-ow1im]

The handbook in my '62 model: "Maximum and cruising speed = 68 m.p.h."

[@eugenepolan1750]

When you say that the Citroen 2CV used the same engine, you must mean they same type - an opposed, air-cooled engine. The 2CV surely didn't use the VW beetle air-cooled opposed 4 cylinder engine.

[@davidcottee2808]

The Type 3 engine had the fan on the crankshaft directly, so could be used without a "fan belt", as the belt only turned the generator. You could drive it without the belt. Until the battery went flat.

[@TennesseeJed]

I have a lot of experience with these! Keep the tappets adjusted, oil changed and adjust the timing at least every two thousand miles, and it'll last a long time! Even if you needed to install cylinders and pistons it was only a few hours from start to finish. Heck, I did it in a parking lot at a Dead show while tripping on plastic fantastic and didn't miss a single song of the show! No miracle needed.

[@Counselor77]

I had a 1969 VW Beetle and a 1967 VW Beetle and I'm kicking myself for getting rid of them. What a great Video. The strangest thing about the ignition system was a little felt pad about the size of a pill located in the center of the ignition shaft in a little pocket underneath the rotor and required lubrication if you let it dry out, the engine cut out and left the car dead in its tracks.

[@RandomTorok]

I owned two VWs with air cooled engines when I was a teenager. In snowy weather they were great on the road since the engine weight was on top of the driving wheels. A point that you missed in the video is that this engine has been used in homebuilt aviation since it's light weight and high power is a great fit.

[@peter-pg5yc]

lier in snow when you accelerated it lifted and spun been there done that.. Front wheel drive buried a bug my rabbit gti was amazing in snow easy to snap back in line on ice too.. and a heater to keep windshield clear not frozen. and a rear defroster and a wiper so you can see in snow.. bugs are twitchy in snow..

[@bigears4014]

They were a good engine to some degree, but they weren't the best far from it, by the mid sixties their day was done

[@chrisdevalcourt648]

Water cooled won out!

[@bigears4014]

@chrisdevalcourt648 water cooled one because to many hp isn't good for air-cooled engines

[@paulc9322]

@@bigears4014hmm. What about 911s

[@bigears4014]

@paulc9322 That's not a vw though , and even 356 was vastly modified compared to a standard vw engine

[@paulc9322]

@@bigears4014 a 356 is very similar to a vw. Basically a 36hp bottom end with 100hp heads. Air cooled can handle buku horsepower. They just went in a different direction. They are better than ever now. Round top cases that will take a 94mm stroke. Air cooled engines make power. Oh yeah how many aircraft use air cooled ?

[@scottm5425]

I remember carrying one of these engines up a flight of stairs, felt quite heavy by the time I got to the top.

[@alanwood5857]

you can go up a stairs with 250lbs.?

[@chrisdevalcourt648]

You go boy!

[@bartsimpson6767]

I have a , '74 beetle that I modified into a "Baja" bug 17 years ago. Lots of miles and car shows, and everyone we meet has a VW story. One of my grand kids will get it when (if) I tip over..🐞

[@chrisdevalcourt648]

Tip slowly!

[@aspensulphate]

Excellent video! Had a '71 Super Beetle with "marineblau" paint. Restored from the ground up. Welded patches over so many rust holes I lost count. Back then you could order anything you needed from J.C. Whitney, even fenders and hoods. A lot of fun to drive! With the still-flat windshield right in your face, operating the Beetle felt more like "wearing" a car than driving one!

[@mikethespike7579]

My brother once bought one of these beetles, used from a farmer. It was ancient, I think a 1970 1200 model. It had been standing outside next to his barn for about 5 years and he was glad to get it out of the way. It was winter when we went to pick it up and was freezing cold weather. We had planned to tow it home since it had been standing for so long, but decided to try and start it, just for fun. My brother put some fuel in the tank and connected the Beetle's battery to my car and what do you know, after just a few turns of the motor the car started. I couldn't believe it. My brother actually drove it home under it own steam, which was a bit risky, not just because of the technical condition of the car, but because it wasn't insured. But I doubt any other car would have started like that after years of disuse.

[@Hector_Rico]

Once on Monster Garage. Jesse James and his team found a VW in a swamp. Just to challenge themselves. They made a total hot rod out of it. Everything about that freaked me the Hell out. Jesse kept the rust on the body and just painted the words "Sour Kraut" or something on it. But unfortunately because it wasnt registered they couldnt drive it in front of a big crowd, Jesse James got a ticket for that.

[@Roger-go6jc]

I bought a neglected1959 Beetle in 1972 for $200 when I was 18. Me and Dad stripped it down, did a little welding and repainted inside and out. We renewed the suspension and rejuvenated the steering and braking systems. All the add on equipment for the engine we made working to spec. The engine/ gearbox we put in for a rebuild at a pretty reasonable price. I remember going shopping for tyres because the Beetle had these old style non-radial tyres. And I found some really cool radials that were going to be great for my 'off the tar' trips. My first car. Sweet.

[@mystified1429]

I remember radials coming in , ere in UK ....you could have x plies on the front and Radials on the Rear . Never mix on same axle.

[@carlorocky]

I bought my first car in 1988, I was only 15 years old. I looked around for the best VW Beetle in town. I ended up with a 1973 model. What an incredibly well engineered machine! Modern cars have gotten bigger and bigger, especially the A, B, and C pillars, which equates to very poor driver visibility. They are also designed to separate the cars owners from their money!

[@fredsalter1915]

Thanks! I had a '68 Bug in high school back in 1984. Loved its simplicity.

[@repairman22]

Thanks for your support

[@donwhitt9899]

I have a 1969 VW Campmobile, 57 hp. The most significant thing I have experienced is on a 7,000 mile touring trip in the US.. I went through the Arizona desert in the hottest season of the year. Along the road were dozens of water cooled vehicles pulled over to the side, steaming, while I flew right past them in my VW, no problem. It has nearly 500,000 miles on it and it is truly an amazing vehicle. Camping up in the Rockies, the gasoline powered heater it had came in handy. It consumes only 1/2 pint of gasoline an hour, and really keeps the inside warm.

[@thomasschwarting5108]

Unfortunatly simplicity in today's world just isn't practical. If its complicated, that's today's world. I would DARE someone to come up with something simple. I'm convinced that MOST people would go for the more simple things in life, but most manufactures DON'T KNOW HOW to do simple!!

[@indorexyggdood5343]

Yeah people need to learn the basics first, like me. Then they will be able to learn this, like me. Great video

[@quillmaurer6563]

The most modern car engines are far simpler than this - only a single moving part (not including the single-speed gearbox). Granted they are electric motors, but they have really pulled off the simplicity bit. Electric motors outperform gasoline engines in every way (cost, longevity, simplicity, power, quiet, smooth, no pollution), the problem is the heavy, expensive batteries that power them, though they get better every year.

[@chrisdevalcourt648]

Today it's make it disposable.. Planned obsolescence!

[@dmoore5120]

@@quillmaurer6563 EV tends to have complex control system ...

[@quillmaurer6563]

@@dmoore5120 Complex electronics, but mostly solid state. Should be reliable if made right. The problem is that most EVs are stuffed with all manner of bells and whistles that I don't trust to last very long. Most EVs are designed like gadgets rather than like cars. But someone could - and should - build a simple "just a car" EV that is well made and, aside from the batteries, last pretty much forever.

[@jesusbencomo3495]

I can remember the day back in 1960 when my uncle appeared with his red beetle . It was a great excitement to all of us to see that different engineered and designed car. I'll never forget that whistling engine so reliable indeed.

[@gergemall]

I LOVE ALL THESE WONDERFUL MACHINES AND FUN . I HAD THEM ALL. LOVED THE ENGINES AND USED TO TIME MYSELF TAKING A BUG ENGINES OUT BY MYSELF AND PUTTING THEM BACK IN BY MYSELF. I STILL REGRET TRASHING MY 73 camper bus , I paid to keep in in storage for ten years. Should have kept it . I Love this VIDEO.

[@stoneylonesome4062]

They should’ve made a version with a cross flow head, a double-row chain to drive the fan, alternator, and a Bosch K-Jetronic inline mechanical fuel injection pump.