3D AutoCAD practice drawing

[@sourcecad]

Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/

[@akhtarkamal4208]

Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. kzbin.info/www/bejne/aHaUfYmPg9pjnJI

[@Vngltn]

you are the best ,with all the AutoCAD video I watched in you tube ,yours's is the most easiest to follow and to learn AutoCAD

[@rakakalogitech5077]

Thank you so much bro, you are a saviour 🥺 !!! I was tired searching for how to remove that intersecting part of one pipe inside another pipe. But I didn't have any idea that it is done through slicing process, and luckily I found your video. Now, I can complete my project bcoz of u. ❤

[@muhammadusamaarshad1372]

Excellent! I will recommend your channel to everyone who will desire to learn AutoCAD. In Shaa ALLAH.

[@hamphreymaakgetjemmola6692]

O.M.G, Most satisfying video explanation. Good work big brother it really gives the light to ones knowledge.

[@johanndupreez7736]

Cannot believe how easy this was. You know how to tutor. Thank you very much. I subscribed.

[@sourcecad]

Thanks Johann

[@Crseery]

Its a cool vid. In the beginning you say the units don't matter and use the "default" however everyone's computer isn't set up the same. I opened Autocad and spent 15 mins trying to get past the first line because it went so far off the drawing surface that I couldn't see it or scroll out far enough (because it was 150 'units'). Maybe if we had started with setting up the units I could have made it through more than 1:06 of the video. Sucks because I really need the 3D practice. Thanks for sharing your knowledge. I will check out one of your other ones and see if I can follow it.

[@bezibedie4259]

Hi. I can't do the copy(7:30) like you . When I see Z axis and type 138, it gives me wrong result. I had to activate Ortho mode to get there. Can you tell me why ?

[@okellofelix4570]

You guys are the best, just keep on with the good work. We love your engineering knowledge, thanks.

[@davidmathis7030]

Most helpful cad video I have seen, thank you for making it! You are providing a great service.

[@عبداللهسويعد-ي7م]

I would say You are a great guy and your videos are rich with knowledge n techniques so THANK YOU SO MUCH for your efforts and Always I look for your videos Thanks again

[@GautamKumar-no2pm]

good

[@kavz187]

You are an absolute legend, this is exactly what I needed to know. Thank you!

[@Songoku-ov1gr]

Hi Jay, another master class from the master CAD himself. Look forward to more tutorials in both 3D and 2D.

[@sourcecad]

Thanks Songoku :)

[@mikkaalico0328]

how nice it is..... thank you coz through this I was able to get more techniques and learn a lot...God bless you always!!!!!

[@ravimourya6190]

The most simple tutorial i watched ..👍👍👍👍Thanx a lot

[@neaton01]

Great tutorial and I'm looking forward to learning more 3D.

[@Adnan_Kamal_VCA]

When I use prespull for circles at 6.59 min it becomes totally solid but in your video it Hollow What I'm missing

[@legendsofmyself]

Thank you so so so much.... I just needed the idea of creating a surface to slice two intersecting cones. I learnt so many things just from this video. I am modelling my project in abaqus and the modelling environment is so unnecessarily complex. Hence I need to use a more friendly software like autocad 3D before exporting and analysing. I am glad to have seen your video. Thanks Again!!!!

[@corporallee44]

Very clear instructions, just what I was looking for to start with.

[@sujithramapuram7322]

thanks sir, I am a beginner in this field ,very useful and your video give me a confidence

[@tusharnavgire5312]

very nice, I would like to learn much more mainly about all modify tools & commands in easy way to use

[@saiprasadu6018]

initially I took more time to understand this slice cmmnd. finally I've learned.but I won't be forgotten. thanks bro.

[@levimor98]

in CAD 2020 ther is no "SLICE" botten. please help. 4:50

[@mieaihtaw3725]

Thank you so much and shall practice all the 3D video you made it. Wish you be more and more successful🤩

[@lalitranga31]

4:37 sir have not any " enter" option when. Right click What i do for ?

[@raizan95]

Where did that concentric circle came from? @14:10 , can u explain how!!? Other than that everything went good

[@sourcecad]

Start watching from 13:38, two geometries with different radii of internal circles are making that final concentric circle.

[@jorgeeduardomoretones733]

Excelent this video!.. this was my first drawing in autocad i was able to do. Thank you!

[@emanuel_azn]

Thanks a lot! This will be my final work for school.

[@akhtarkamal4208]

Challenge 😎 --------------------- 🗣️ Can you draw a circle using rectangle command in the AutoCAD? You Don't know?😱 Go now and Watch this video how to draw a circle using rectangle command. kzbin.info/www/bejne/aHaUfYmPg9pjnJI

[@chizzwigwe7740]

when I try to extrude I only have a solid solid option, no circle, I have selection cycling turned on

[@shinedontdine]

At 5:07 i cannot slice. Slice failed for selected solid.

[@stoffel1330]

Thanks for the video, helped me alot. I'm new to 3D designing in CAD.

[@junhermogino8350]

sir thanks a lot for this tutorial videos..it helps me a lot in developing my drawing skills..hope to see more tutorials from you.more power to you sir..

[@thevegg3275]

I have never gotten beyone 5:55 where the second slice is performed. It keeps failing. Can you postulate what may be happening? Thank you!

[@samyyoussef8380]

The best of all 3D concerning Coordinate systems , handling views and dealing with the slice command; actually it is a package 3D tutorial.

[@nsggood]

Thank you Sir, excellent training video. This really helped me understand how to orientate the UCS and develop geometry relevant to an obect and also how to trim intersecting hollow objects. Suscribed😁

[@gdblackthorn4137]

Wow, it is amazing what you have done in such a short time here...

[@banotheshwar5824]

It is very helpful for learner please update more video s thanks for your clear explanation

[@_silverseiyan5232]

Hi, while trying to copy and paste along the z axis I found I couldn't input the length, it just kept showing 0.0000

[@mrqloak1453]

I have completed this figure on CAD 2021 and it actually worked, though I had to go back many times to his given command. A lot of the commands he did is errorneous in the new version of the program.

[@earthstrong7855]

please increase the volume friend, thank you for the excellent tutorial though

[@simontillema5599]

The polar tracking doesn't work for me. Any ideas how to turn that function on?

[@madhusankawijerathne8435]

Can i change color after draw?? Or do I need to set it at the beginning..?]

[@inderjitsinghsaini1913]

triangle type flange edge is not aligned to the main pipe axis. please show that also to adjust.

[@அல்லாவலுசர்ப்பம்]

Thank u again,, each video is very useful& clear

[@johannessudibyo741]

Thank you for explaining, GBU

[@GerardoElJerry101]

I just can't get surface trim and slice to work for me. Do you have someone I can message you some pictures so you can see what I'm talking about?

[@paulbunyan7792]

Hello I have followed this tutorial extensively but whenever I get to the point of slicing it wont let me and it keeps saying no surface selected

[@kavishsoorya5282]

The last triangle 📐 doesn't fix exactly on the right pipe , it fix in straight way. Where as in diagram it fix perfect(tilt manner)

[@zigotina]

13:04 if you can't trim arrayed circles, first explode them

[@diyadas1132]

Before slicing whhen i am going to extrude i am getting no option to extrude the circle...there is only one command i.e. 3d solid...what to do

[@baxwala]

@4:41 i selecting circle but the hole dissappearing. I m doing everything right in the video. What is wrong im doing?

[@cvfernandes]

select extrude command> get the mouse pointer over the surface and click CTRL key and move the mouse over the surface

[@vinayakachari2152]

Sir,This is the very good video and very useful to all.Please send more videos of new one .Thanking you sir

[@sourcecad]

Thanks Vinayak. I will try to increase the frequency of uploads on SourceCAD.

[@dvand8158]

cannot select the second surface to slice. Know why?

[@cineclinic8660]

I'm happy to see your tutorial. Thanks to do this type of project. and make us another video.

[@ThisisTarshiha]

Hello, I am not able to trim the 3 circles in the last object. When I select trim and enter the arcs are not marked and trimmed. What could be the reason? Thank,

[@nathanelrond8796]

I have a problem with the copy step… Tried everything but my component cant align with the z-axis😭helpp

[@alunbelton8426]

Great tutorial, thanks. How do you get the steering wheel to remain visible and as displayed in this video?

[@Ravisatparkash]

Hi.Its been very long time waiting for your video. Your videos are very useful and very good.

[@daos20000]

such a lovely video.. Understood clearly

[@satyajitsahoo8656]

Sir..i have a problem with my autocad software..its the 2010 version..the problem is i cant find all the toolbars on the home tab such as surface toolbar,parametric toolbar and also not able to see the View Cube on 3d wireframe ...also not able to see the Drawing number ,view names on the left top corner ..facing alot problems..kindly respond with the solution.

[@davidbustamante7421]

quite fast for beginner like me, but im amazed how u operate all the commands.

[@humenbot24]

Hey Jay, Why didn't you went for solid extrude from start. You started with surface extrude then thickened it. If I start from solid extrude from beginning of drawing, will it matter or it will be same thing ???

[@Webtactics]

Very well explained, thank you for sharing your knowledge.

[@abelpinter7240]

Very clear instructions. It is great! Thanks

[@cadworks6386]

Some videos of typical model here: kzbin.info/www/bejne/Y4nJc5ivrN-fY5I

[@aziyatulaziz4882]

I can’t extrude and trim the rectangle one

[@peterparas4999]

what is the diffirence between press pull command and extrusion command?

[@davebog3575]

Its a great pleasure to have you on KZbin, but am new to 3D Modelling, can you please share with me those very first tutorials for beginners like may be the introduction to 2D or 3D Modelling. Thanks.

[@grumpyed3536]

having issues with the tangent lines after creating them and I select trim all 3 circles become highlighted and it selects the polar array and does not let me trim

[@sourcecad]

explode the array before using trim command. You can explode by selecting the array then type X on the command line and press enter.

[@grumpyed3536]

got it thanks

[@grumpyed3536]

For some reason I got the last instruction but now when I go to move the created fixture to the end point it seats at an angle and not flush?

[@PulpFictionChronicle]

@@sourcecad thank you! was stuck on this bit for over 30 mins before i found your advice

[@rendellsoberano8784]

is there any payment method other than paypal? i want to get a certificate but i dont have a credit card linked on my paypal.

[@seanduke22]

You are the best, I love your voice

[@harshchouhan7007]

There is no option coming after selecting a circle for extruding circle

[@surferinthedark]

Very nicely explained - thanks a lot.

[@sumitlowrence329]

Hi, thanks for the tutorial video, it is really helpful for beginners like me!

[@emulsionadordepositroness5417]

hi!, at the minute 13.09 i do exactly what you do to trim the circle lines, but, nothing happens..just a message "the object was not processed by trim"... what can i do?..i will apreciate your support.

[@andygiang6756]

My filet edge curves into the solid instead of outside of it. Is there a way to reverse the direction of the filet?

[@faroukbouras4840]

PLS make sure the pieces are joined -union command- and use filletedge in the solid tab. good luck

[@arnandeguzman9474]

Cant select the inner circle to extrude.

[@altafzulkarnain4111]

Hi Jay, i want to ask, when i select slice comand then after choose solid after that i have a problem when i want to select surface then will be erased it can't be selected

[@altafzulkarnain4111]

sorry for my bad english

[@sourcecad]

Sorry Altaf I am not able to find the exact issue you are facing with the drawing, can you share a snapshot if possible?

[@corporallee44]

Easy to follow, BUT, after selecting the second 'Extrude' command and pulling the circle to the line, I have a problem. probably simple but the shaded command shows me two separate tubes, which are not connected as shown here. I have tried it numerous times but can't get it to connect. WHY? Thank you for any useful comments.

[@sourcecad]

Hi Arnold, without any screenshot, it will be difficult for me to tell the exact reason.

[@rambahaduryadav7586]

Sir,This is very good video .Please send more videos of new one .Thanking you sir

[@tabishfaizy7819]

Great Tutorial bhai.

[@zaidhashmi4213]

From where we can download it? Kindly share

[@rengasamykesavan9597]

Sir pls upload a video for pipe branches..

[@diyadas1132]

It was really helpful...thank you verymuch

[@notyourparentsrecordcollec6178]

hello, i am working in autocad 2017 on mac and selection cycling isn't an option when i click on the gear in the bottom right corner, i cannot figure out how to turn on cycling. any help would be appreciated thank you

[@sourcecad]

Type SELECTIONCYCLING on the command line press enter, type 2 and press enter again. This will activate selection cycling. To deactivate it type SELECTIONCYCLING again press enter and change value to -2

[@notyourparentsrecordcollec6178]

great thank you! one other thing, for snapping the z axis to a specific point i don't see the tool that you are using in the tutorial in my program or even the coordinates toolbar that it's in, I'm not sure if the mac version is just missing that feature, it does have the UCS toolbar

[@rybamumu2]

I can't select the surface

[@danielteyehuago1633]

Please should have added dimensions to the actual drawings for it to be simple for us... Also try change the to vertical so that you can draw at one side and the image at the other side too...

[@easypc5608]

Nice work. Good tutorial!

[@sundeepsunil5686]

i didn't get a hollow after extruding...

[@viralraval322]

Better useful of *mirror* commond *Copy* space B. Cause copy commond in always dimension take it

[@spectre19641]

Hi Jay. Thank you for the help. I had a few issues. when I extruded the circles at the beginning, they came out as solid cylinders and thicken didn't work on them. I also had problems with slice.

[@sourcecad]

have you switched to surface tab before selecting the extrude tool?

[@spectre19641]

Hi Jay, I didn't go to surface previously. Thank you.

[@sourcecad]

Welcome Chris

[@mengxuebi401]

Hi! I love the video but I just hope you could explain more on WHY you are using so-and-so functions. THX:)

[@Atilaz]

Thank you, bro, you are the genius

[@roxanaioanaciciu1489]

Sistem ciclyig is on, is still is not working, explain all the steps and errors could apear. In this case everyone what can do? Is not working that i can just change the video and hope that someone else will try different option?

[@grumpyed3536]

For some reason I got the last instruction but now when I go to move the created fixture to the end point it seats at an angle and not flush?

[@sourcecad]

I am unable to understand the question, can you tell the exact time stamp in the video when you have the issue?

[@mzorkea]

why close associate option in array?

[@davidcsik9761]

nice vid man, you`ve helped me a lot....but I have a problem, a made a similar part, but I have a cylinder and acuboid. I wanna make a fillet, but the program made a fillet the wrong way. How can I change the way of the fillet? I don`t know that you understand me, sorry for my bad english.

[@davidcsik9761]

just solved it, the parts were not joined.

[@sourcecad]

I am glad you figured it out yourself.

[@skshah7967]

hi sir I saw one of your 3d tutorial which is 3d object can be hide , I mean 2d geometry will remain and 3d part will hide I forgot now I am trying to find that video but failed, please help me

[@newtothisthing]

Hi. Is it possible to divide an irregular 3D object into equal parts using AutoCAD ?

[@Saikiran-qb2yo]

Sir iam not able to make Hallow inside the tube

[@kshitijkumarkushwaha8903]

Sir, you make certain commands a little bit complicated 😐. Bcoz we are using certain commands for the first time.