3D Fiber Laser Engraver Software Overview Lit Laser

This video will help get you started on importing and marking 3D parts on our laser systems in order to get the best results from your laser good artwork is key
The laser used was a 5O watt fiber laser
Email [e-mail] to contact us

[@OrsonY]

how do you polish the flat area so nice

[@hansgustav2234]

You need an automatic z axis for this? Thx

[@alvint4944]

Can fiber laser do 3D engraving? Or do we need a different fiber laser to do 3D engraving?

[@flashfuss]

Great video!!!

[@edvardlazeta]

Hi, please tell me which laser is it? and where it can be purchased. Thanks

[@turalorucov9897]

hello, I have same machine like yours. but i have a problem. I am working with silver material. I want to engrave photo on silver. My machine is 50w. program is MM 3D. I need settings for silver.

[@vishaladhav6577]

30 watts can 0.5 mm deep Engrave, On SS, how long it will take to Engraving?

[@edselcornelia6329]

Hi I want to buy a exemplar of the lion that you have made is this posibel?

[@krpyojmt2942]

Cuanto demora ese trabajo si lo haces en acero

[@giancarlolucarelli2230]

Hi, but you use motorized z axes or autofocus lens for 3d angrave? I mean you engrave like 3d printer with motorized z base or is the autofocus laser upgrade?

[@litlaser626]

It is a combination of both autofocus and a programable z-axis

[@ammo7985]

How to enable preview marking

[@pottiBoo]

How much power had the Machine you used in the Video and how deep did you go in the Material?

[@altar7885]

36 hours wow.

[@imy0urmind]

I cannot do this in ezcad. May I know what software are you using?

[@opieshomeshop]

You aren't very bright are you...

[@samraa2006]

36 hours? again how thick the material was? 2 MM? looks amazing

[@wiraxbox360]

It's a long time, so how many dollars is this job worth?

[@SyamDanarta]

is it possible made dies for die casting with fiber laser?

[@litlaser626]

yes It is possible

[@LazerPrint]

Do you need a 3D fiber laser or can you use a standard 50w fiber laser?

[@litlaser626]

You will need a 3d laser for 3d engravings

[@LazerPrint]

@@litlaser626 Is it possible to upgrade a 50w to 3D?

[@litlaser626]

​@@LazerPrint Yes, it can be done it requires the whole machine to be stripped down and replaced with new parts for the upgrade only keeping the 50w laser source

[@LazerPrint]

@@litlaser626 That sounds good, I've replaced a laser source, so understand the different parts. How can I find out more?

[@ch.wey.4406]

@@LazerPrint I have the same issue and I would be very interested in too ...

[@soncha5331]

Can you do this on all laser machines?

[@thebabbler8867]

No. Only on a 3D Laser Engraver: Z axis is energy controlled.

[@okyereemmanuel5236]

Nice lessons. I want to buy a fiber laser. Is 20w good enough for this kind of job

[@TheDopalgangr]

For this I would say 50w minimum. I have a 30w and wish I had gotten the 50

[@okyereemmanuel5236]

@@TheDopalgangr but can the 20w engrave on metals

[@litlaser626]

@@okyereemmanuel5236 Yes 20-watt lasers can engrave on metals. For 3d engravings, I would recommend a 50w machine minimum

[@MrBennybrice]

@@litlaser626Excellent tutorial. Can I ask the make/model of your machine? Thanks from Australia

[@litlaser626]

@@MrBennybricewww.litlaser.com/products In this video, I used our 50 watts 3D machine

[@DADEE23]

Could this be done on a gun?

[@litlaser626]

Yes, depending on the material

[@DADEE23]

@@litlaser626 I have a glock 19 so it's made with polymer. This would be amazing to do on a grip!

[@nathanmontoya4678]

​@@DADEE23 😂 you can't go to deep on a lower it ruins the integrity of the lower but you can do the slide and custom stippling on the lower just not 1mm plus deep the lower is built to a certain tolerance you take off too much material you gun is done dude.

[@user-uq4rz9el1m]

ชื่อโปรแกรมอะไร

[@ShortBetter]

No answers here..

[@anartofethiopia7898]

Did you just say 56 hours to complite or is that my ear?

[@altar7885]

I heard 36 hours.