3D print toys Glock17 NEW

[@Ekcnheb]

KZbin’s rules make complete sense and I love them 😍

[@voltaire_09]

Ironically?

[@cloverp._p]

glock is really iffy about trademark, it’s not yt rules. jsyk

[@bred2341]

Are you an npc? Just asking

[@Ekcnheb]

@@bred2341 if you couldnt tell I was lying.

[@bred2341]

@@Ekcnheb i apologize. I just noticed on your acc you had another comment like this

[@Hyperguyver2]

And this works great for the Lawgiver MKII kits from Dredd 2014

[@TacticalForce445]

I really love guns and always had an idea about 3D printing a toy one obviously 😂 but I never thought that it was a good idea and thought that it was also impossible till I stumbled across this channel that literally makes 3D printed toy guns and now I'm saving for a 3d printer.

[@dalroache]

if you live in the uk please take care uk isnt like usa people get knickers in a twist etc

[@TheElusiveWhy]

Ender 3 printers (great starter printers) are very cheap [used on eBay; in the United States], being sold for only $75 [which includes shipping!] I'd encourage ya to start with a cheap used Ender 3! As for myself, I boughten 6 brand new printers over the past 3+ years since beginning with 3D printing, I'm no expert but have a little bit of experience and have survived the 'learning curve' as I call it..

[@TheElusiveWhy]

One Other thing, if you’re not familiar with DefCad, you might wanna google that

[@Simonyoda123]

Did u got the 3d printer already?

[@TacticalForce445]

@@Simonyoda123 no. Saved and bought a £1.6K gaming pc. I’m not really interested anymore about 3D printing but will do in the future

[@teachmenow8547]

Would love to see the following builds, Mossberg 500 (12 gauge); Colt Python (357), Mac 10 (45 acp), and a 50 bmg (barrett or another)

[@Deegan787]

Way too big to 3d print

[@TheKingOfHeartsIV]

nothing is too big to 3d print

[@rishiagarwal2071]

Whats the second part you used after the mag release, cannot find that in the files, the second part use at 00:12 seconds, whats its name in the model file

[@zvc_3DPrint]

Please send me a screenshot of your purchase. [e-mail]

[@takemichi5289]

hello can i ask? What is the size of the trigger? 3:15 fruits of green and ash color size?, why I'm fail size?

[@zvc_3DPrint]

You can take a video of the problems you encountered and send it to me.Also, there is a screenshot of your purchase. [e-mail]

[@fl8281]

Screw you Glock and KZbin!!!. Leave this man alone!!!

[@zvc_3DPrint]

😂

[@corail53]

Glock has the right to protect their trademark.

[@danielvlasyuk5907]

I want this for Christmas because I like guns but I can’t own a gun😂

[@westEOD]

You should sell packs of the hardware.

[@dannypeto8734]

That printer looks like its holding really close tolerances ,was the assembly straight out the printer meany after they cooled and Cured ,no finishing or fitting ?

[@zvc_3DPrint]

Need simple polishing

[@jenavinogradov9161]

in this model, it is impossible to make an automatic withdrawal of the upper part of the barrel? As it was in the last video

[@zvc_3DPrint]

yep this is an assembled model. This model is also available in a blowback version.

[@老军7777]

If you are interested, you can try to do the next 26

[@zvc_3DPrint]

😉will be made future

[@rezkiikzer]

​@@zvc_3DPrintgive me file please

[@arleetiff]

is it possible to buy springs or where can I get the wire required? also where is the file for the spring making tool

[@zvc_3DPrint]

The spring needs to be purchased from a physical store according to the size shown in the video. Only magazine springs can be made by oneself. drive.google.com/file/d/1In1te0kpH-ituZSOLP9nlN9spj95PsVd/view?usp=drive_link

[@arleetiff]

@ thank you

[@alexchulzhanov]

Very cool, close similarity to a real one!

[@billrowan1957]

👏 1:1 awesome job! 🤙

[@---qq9gs]

can you make a video so that the barrel is threaded and have a silencer / compressor for it?

[@zvc_3DPrint]

Sorry, what I made was a toy gun. The barrels are solid.

[@killpidone]

@@zvc_3DPrint I believe what he's asking is if you could print a slightly longer barrel with threads on the end and make a cylinder to thread on the longer threaded barrel imitating a suppressor.

[@Jaybird544]

Where can I buy this or the file for the print

[@zhenliu-s7u]

How can I bought it?

[@ryanhornick-b7i]

What happened to G17 blowback kit?

[@zvc_3DPrint]

Complained by trademark.I'll add the mosaic and reupload 😑

[@FlorencioParaon]

Are they the same dimensions as the real model? If I add a flashlight mount it would be stable?

[@zvc_3DPrint]

There will be some tolerances. Not quite the same.

[@RangchakSikla]

Beautiful toys,👌 how I can get this.

[@zvc_3DPrint]

cults3d.com/en/users/zvc0430/3d-models bingdelengku.github.io/

[@EhRabz]

Just to be clear, this is just a toy and can't be fired or easily fitted to fire? ( I just want a toy )

[@zvc_3DPrint]

yep can't be fired

[@刁犬犬-z8r]

Will it fire if real bullets are loaded？

[@zvc_3DPrint]

no

[@Semi_locvk]

Can you make a extended magazine

[@zvc_3DPrint]

cults3d.com/en/3d-model/game/glock-17-zvc0430-2

[@alien-nizando]

Where can I download these models?

[@zvc_3DPrint]

bingdelengku.github.io/ cults3d.com/en/users/zvc0430/3d-models 🙂

[@Sh1tbagActual]

God I wish the firing pin collars on actual glocks were that easy to install.

[@CamR704]

How much would it be for a fully assembled/completed model.

[@zvc_3DPrint]

sorry only sell stl file🙏

[@CamR704]

@@zvc_3DPrint man please I’m willing to pay pay you 50 dollars, cause look all the people that watched it really want one. some of them don’t have a 3-D printer. Do you know how quickly those with sell!!!!

[@zvc_3DPrint]

@@CamR704 Sorry I still need more time to make new models 🙏

[@tadejozbic3522]

@@CamR704 i can print u one if u buy it

[@CamR704]

@@tadejozbic3522 how much?

[@scarlet.remilia]

can i use saturn 3 ultra for print?

[@zvc_3DPrint]

print size?

[@scarlet.remilia]

@@zvc_3DPrint same as in video

[@zvc_3DPrint]

@@scarlet.remilia No problem

[@scarlet.remilia]

@@zvc_3DPrint thank you ^^

[@drugurkaya]

whats the diffrence with the old one?

[@zvc_3DPrint]

Made some optimizations. Not much difference

[@drugurkaya]

So i need to buy new one?@@zvc_3DPrint

[@joaoulisseslopes6992]

Hi. I recently purchased two models from the site you´ve made available. I´d like to know if there´s some assembly manual for that, instead of watchin the video. Thank you. The files are awsome by the way.

[@zvc_3DPrint]

Sorry, there is no assembly manual. Only this video can be referenced. 🙏

[@joaoulisseslopes6992]

@@zvc_3DPrint Could you please tell me the print settings you use for these files? - temperature - speed or any other necessary and interesting information. I don't understand much about 3D printing and that's why I'm enlisting the help of a friend, who doesn't have the same model of printer that you recommend. Thanks

[@zvc_3DPrint]

@@joaoulisseslopes6992 Layer height 0.15 speed 60 filling 30-40% temperature 190 pla support 45 degrees 2mm

[@joaoulisseslopes6992]

@@zvc_3DPrint Thank you, again.

[@zvc_3DPrint]

@@joaoulisseslopes6992 😉🫱🏻‍🫲🏼

[@kayraberik4808]

Can u make usp-s please?

[@Akarma9212]

@zvc_3DPrint can you do a Glock 34 MOS, please 😢❤.

[@zvc_3DPrint]

maybe future🙂

[@Akarma9212]

@@zvc_3DPrint thanks and continue, i love what you do!

[@toruvalravn7746]

Hey I love your channel!!! I would like to ask how do you make your models ? where do you get references for each weapon detail? I want to try to do a similar job, but having modeled every detail from scratch myself, that's why I'm asking to find out how I can make a model of every detail in a modeling program))0. And finally, two more questions, what plastic do you use for printing and in what program do you make models for weapon parts? Thank you for your attention, I really want to learn how to make the same models because of my love for weapons)0

[@zvc_3DPrint]

pla 3dmax

[@toruvalravn7746]

@@zvc_3DPrint hi, where do you get references for gun parts?

[@岦刐筽]

is this model printable with an Ender 3 3D printer? If it is, what settings do I need to use for the print?

[@zvc_3DPrint]

layer height 0.15 speed 50 fill 40 temperature 190 pla

[@legocarguy]

Does it's blowback or do you have to pull ut

[@goldenninja2010]

Pull it

[@rayearthnineteen3925]

how kind of material did you use?

[@zvc_3DPrint]

pla

[@tadejozbic3522]

Witch settings do i have to use for ender 3 v2

[@zvc_3DPrint]

mail me [e-mail]

[@zvc_3DPrint]

Because the trademark complaint video was deleted, it will be updated again. Added spring dimensions. Purchase link ： 34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1 cults3d.com/en/users/zvc0430/creations

[@cowabungacrypto]

where can i find the spring dimensions? i've printed a couple of these, i love them, but missing springs

[@goldenninja2010]

Do these springs come in the spring kit you have in the description

[@goldenninja2010]

Pls get back to Me asap

[@zvc_3DPrint]

@@goldenninja2010 only part of the spring in the kit

[@goldenninja2010]

@@zvc_3DPrint so can I buy the kit and be good or do I need to buy other stuff

[@2054-j9e]

what did you blur out?

[@goldenninja2010]

He got the glock logo copy right

[@mikeyskilton6876]

hello, does this model trigger work?

[@zvc_3DPrint]

The structure can move, but it doesn't work

[@RMSLLC1]

@zvc 3D Print could i pay you to send me a pre assembeled one

[@zvc_3DPrint]

sorry 🙏

[@gabrielorozco8123]

Amazing 🤩

[@xSean145]

Hi, this model is not in your shop, i can only find the other blowback version.

[@zvc_3DPrint]

cults3d.com/en/3d-model/game/glock-17-zvc0430-2

[@xSean145]

@@zvc_3DPrint thanks, i bought the Blowback version. Not easiest thing to print but it looks super cool thanks!

[@mathisdionne643]

J’aimerais en avoir un comment on fait

[@zvc_3DPrint]

cults3d.com/en/users/zvc0430/3d-models bingdelengku.github.io/

[@Pecinha7]

MAC-10 PLEASE

[@Tibetbrick]

Why u censored it?

[@killpidone]

Trademark complaint

[@Tibetbrick]

@@killpidone oh i see thanks

[@cloverp._p]

glock is really iffy about it’s trademark

[@corail53]

@@cloverp._p As they should be. If someone decided to do some illegal things with this particular print and their branding was on it - it would be a horrible look for them.

[@cloverp._p]

@@corail53 for sure, it’s just particularly annoying for some game designers and toy gun manufacturers who want to use a glock in their game or product

[@gurken_sohn337]

can you buy some parts instead of buying the whole model

[@zvc_3DPrint]

what parts do you want to buy？

[@gurken_sohn337]

@@zvc_3DPrint i`ll need the trigger bar , trigger,control block and slide back cover plate

[@maxhuber161]

That would be cool to be able to buy parts

[@Najemnik79]

imagine switch on that

[@WawanTimah]

Dimana aku bisa membelinya

[@zvc_3DPrint]

bingdelengku.github.io/

[@Raamad]

Hey man, I contacted you on cults about files I never received, and you asked me to resent those e-mails. I didn't receive any response, did you receive those ? Thanks

[@zvc_3DPrint]

already to u 🙏

[@Raamad]

@@zvc_3DPrint I'm sorry but I don't think I received anything ? Did you send me a mail ?

[@zvc_3DPrint]

@@Raamad Then I'll send you another one

[@Raamad]

@@zvc_3DPrint I've sent you another mail to make sure that you have the right mail address. This is about the G17 blowback, the Winchester 1897, and the MP5. So far I still havent receive anything :/ Sorry to insist

[@mayconfavero291]

Qual valor?

[@zvc_3DPrint]

Model Purchase link ： 34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1 cults3d.com/en/users/zvc0430/creations

[@ТОнинео]

А почему места замылены?

[@dvoika3646]

потому что на рукоятке логотип глок.

[@lucioliang7253]

It was too difficult to find the size of the spring before, so I gave up

[@zvc_3DPrint]

😅

[@AnthonyOlivas-b7k]

You should definitely resell a spring kit. I’m having trouble trying to enjoy the model you worked so hard for. I would have hate to spend the money and time for me not to be able to fully assemble it

[@zhenliu-s7u]

How can I bought it? Did U have ebay? Paypal?

[@zvc_3DPrint]

bingdelengku.github.io/ cults3d.com/en/users/zvc0430/3d-models only stl file 🤝

[@zhenliu-s7u]

@@zvc_3DPrint 3KS

[@bladyX2]

Can you buy your goods?

[@zvc_3DPrint]

There is a purchase address in the description area of the video. but only stl files

[@jorgeeliseoperezavila4511]

Try to make the walther lp53 (airsoft gun) (sean connery 007 gun)

[@ahmadfakkerdine3901]

First

[@BlazingGex]

I wonder if you could use real parts...

[@zvc_3DPrint]

no there will be tolerances

[@travisanzai9275]

could i make it fire real live rounds if i change the barrel to a real barrel and the fire pin to a real firing pin , will it work if not what will it need to fire real rounds

[@zvc_3DPrint]

This model doesn't work with real gun parts. There are small differences.And it's not recommended for use on real guns. It's dangerous.

[@corail53]

Because that doesn't sound shady at all.

[@ImNotPalmer]

@@zvc_3DPrintand illegal in some places

[@sammyd1644]

Me a bit early

[@mayconfavero291]

Gostaria de comprar uma dessa

[@zozobinks9741]

Please glock 44

[@fabiof6221]

So it’s basically a fully „working“ gun, but made out of plastic?😂

[@YourArzen]

It's just a toy model with fully functioning parts that can't shoot real ammunition what u expect

[@Wertdante]

If you put a real bullet on this gun I think it will blow up

[@corail53]

Nothing fully working on it - it can't even cycle on it's own.

[@And-hd3oj]

@@corail53just put a real Glock slide n put a p80 rail n trigger n there u go a workin Glock 17

[@SKJuri]

​@@YourArzenit can. It had the metal parts and is called ghost gun.

[@profugo679]

Alguna sabe como comprar una ?

[@zvc_3DPrint]

34.85.62.241/forum.php?mod=viewthread&tid=1258&extra=page%3D1 cults3d.com/en/users/zvc0430/creations

[@profugo679]

@@zvc_3DPrint podría dejarme washap o telegrand?

[@Rip_RedDragon]

Bruh stress shot is better

[@yambowee-yt]

18£ for this?? 💀💀💀💀💀💀💀💀💀

[@juantopoomg1230]

STL BRO?

[@takemichi5289]

pliss