I printed one of these two feet across. Just needs a little smoothing and painting before putting it up on the wall. Love it!
@WhiskyLima5 жыл бұрын
You sir are a very patient man. I think I would have given up after the first minute and a half of masking! Nice work!
@willemweber48433 күн бұрын
luckly there is a v2 of this file now in 3 parts to print and paint and then assemble
@LoFiHits_15 жыл бұрын
Great job! I like this very much cos this is one of my favorite films (the one from 1984). Very cool, I will print this soon, for sure.
@baschz6 жыл бұрын
like the smiley slowly ghostly fading away from 0:45 :)
@gettingoldstuff64627 жыл бұрын
Hi and thanks for the video . Helps a bit with the in betweens ...... Question for you . Possible to print in two pieces ? Ghost and stand ..... So i could print one red and one white ? Thanks and keep posrting . 👍😎
@FilamentForge7 жыл бұрын
yes I didn't know until after I printed it that there's a split version here's the link www.thingiverse.com/thing:2257297
@aureliosempruno54283 жыл бұрын
Very nice job, love your art, but sadly this video i had to watch it mute coz the music is so stressing, perhaps something less noisy for next videos
@carlosvertiz60035 жыл бұрын
Hi filament forge, can i make you a question? Wich printer do you use, i like your prints very much, and im kinf of new in this things of 3d printing,
@FilamentForge5 жыл бұрын
wanhao d5s
@Wayne_Nero5 жыл бұрын
Great build
@marciofilho91565 жыл бұрын
I really like your job!! Just a question, It was 34 hours straight? Can't your print get overheated or something like that
@FilamentForge5 жыл бұрын
yes 34 hours straight and no my printer wouldn't overheat cheers
@ChunkyJo6 жыл бұрын
When you're masking, how precise are you on lines? I've found when trying to hug an edge it's rather inconsistent and I'm having a hard time keep straight lines.
@FilamentForge6 жыл бұрын
when trying to hug a edge I like to go over the line and then use a very sharp knife and ruler to cut the masking tape to where it should be. hope this helps
@ChunkyJo6 жыл бұрын
A ruler! BLIMEY! How have I never thought of that? Thank you much! I'll give it a shot
@gloriaispache60206 жыл бұрын
What next you go to make 3D print of the loud house changers with 3d printer can you do now please.
@iRDaBrit6 жыл бұрын
0.2 layer height or 0.02? Seems like it would take weeks at a tenth of the layer height?
@FilamentForge6 жыл бұрын
0.2 just a typing error
@mysteryunwrapping95184 жыл бұрын
Amazing
@xoutvr6 жыл бұрын
Hey filament... Can u do a wwe championship belt plate.. I wanna buy a machine but wanna see if the machine can print it. Thanks. Let me know
@FilamentForge6 жыл бұрын
did a little search and there isn't any good stl file out there
Newfie4Life I had a look and it's a skp file so I'm not sure if it can be converted to a stl file
@xoutvr6 жыл бұрын
Filament Forge well thanks for checking... Would be cool if it can be done. I'm impressed with all your work.. Keep it up
@GaryTabarJr6 жыл бұрын
Do you remember where you got this version of the Ghostbusters music?
@FilamentForge6 жыл бұрын
its on youtube just search for ghostbusters remix
@Bobster9866 жыл бұрын
Another awesome one. Can do you recall your printer settings? Thanks!
@FilamentForge6 жыл бұрын
I use the default wanhaomaker slicer setting L/H .1mm 8% infill 50mms and minimal support hope this helps
@gnj85416 жыл бұрын
Cool thing ever
@DEVILSFPV5 жыл бұрын
I also do alot 3dprints and finishing, wondering if you were looking any ideas for a few videos?
@DEVILSFPV5 жыл бұрын
Also I see you do alot of masking with tape, have you tried silly putty? It will be your friend for ever
@FilamentForge5 жыл бұрын
No I haven't tried silly putty yet will have to give it a go what idea have you got for some videos?
@DEVILSFPV5 жыл бұрын
Old school power ranger helmets, mega man helmet, Theres any thing from this guy (pay for stls) www.malix3design.com/?m=1 Infinity gauntlet Any thing avenger (you did the hulk one time)
@FilamentForge5 жыл бұрын
there some good ideas thanks for sharing l have put them on my to do list cheers
@stephyweedy4 жыл бұрын
nice work ... Again ;) .
@FilamentForge4 жыл бұрын
Thanks pal might print a bigger one now that I have a bigger 3d printer
@stephyweedy4 жыл бұрын
@@FilamentForge cool , ,so a lot of cool projects for the future, good luck Mate.Your vidéos gave me the motivation to buy a small 3d printer , so I have to say Thank you for that too , it comes from the hearts
@FilamentForge4 жыл бұрын
@@stephyweedy that's nice to hear have fun printing 👍👍
@ghosthead847 жыл бұрын
Nice work!
@crearobotics84896 жыл бұрын
Thats the propper order of sand paper? I mean sand it in that order?
@FilamentForge6 жыл бұрын
course to fine I like to do 80 grit to 120 grit then maybe a primer wet sand
@nowimnothing7 жыл бұрын
nice work
@yoamal11876 жыл бұрын
what 3D printer are you using and softwere
@FilamentForge6 жыл бұрын
wanhao d5s and wanhaomaker slicer
@yoamal11876 жыл бұрын
Filament Forge thanks
@davidacosta35454 жыл бұрын
Ghostbusters 3 afterlife was delayed to March 5th 2021 because of the coronavirus pandemic and you need to be patient please.
@jimallen43826 жыл бұрын
Hi all new too 3d printing was grade sand paper you using to do your prints
@FilamentForge6 жыл бұрын
Jim Allen I like to use 80 grit to get rid of layer lines then 120 to smooth and after that high build primer then wet sanded with 800 grit this method gives a good finish
@jimallen43826 жыл бұрын
Filament Forge many thanks for the help
@ertlpercyproductions15577 жыл бұрын
i like it
@skyhacker65 жыл бұрын
0.02 mm are you sure ?????????? the most advanced 3D printer can get up to 50 um at most ! 34 hours for this ...... well buy an other printer ! I printed very very small gear (1.81mm !! height) and it took me 2.30h !!! at 0.05mm layer height !
@FilamentForge5 жыл бұрын
its just a typing error was 0.20 at 40mms
@ashleyjuhalaajthefriendlyg14253 жыл бұрын
I wish I had one
@privateinformation93845 жыл бұрын
If I were to slip you some Patreon money, would one of these show up on my doorstep 😉
@danielwatson13886 жыл бұрын
Awesome vid but the music was so famn annoying, could you've put on something else?!