3D Printed Lightsaber (Rahm Kota)

In honor of Star Wars The Last Jedi being released later on this month, I decided to model and print a lightsaber. Enjoy!!!
Outer Rim Sabers: etsy.me/2iBgsKo
Custom Plaques: www.ebay.com/itm/Master-Replicas-EFX-Hasbro-Anovos-Helmet-Lightsaber-Custom-Plaques-v2-1-5x3-5-/192293129618?roken=cUgayN&soutkn=zopIut
Don't forget to check out EggHeads Entertainment: / @eggheadsentertainment...
Twitter: / thebrokennerd83
Instagram: / thebrokennerd83
KZbin: / thebrokennerd83

[@UncleJessy]

Dude, so happy with how this turned out! Can’t wait to get the saber and build the base!! Another amazing build and project!

[@BrokenNerd]

The Man, The Myth, The Legend, Dude I can't thank you enough man. I really hope you like the lightsaber man!!

[@Iceadded1]

@@BrokenNerd hey I have some questions.... I never done this before but I always wanted too so I'm learning everything from scratch I don't own a printer yet but my first one I plan on buying is the Phenom L because I have the money for it right. Know I just wanted too know your opinions because I know nothing about none of thus but I do know that's the best one so far to have

[@3DPrintingNerd]

SO GOOD!

[@BrokenNerd]

Thank You sir, as always I really appreciate your support!!!!

[@SEANANIGANS32]

Once again, the attention to detail! You really put your heart and soul into your work and it shows! Bravo!

[@BrokenNerd]

Thank you so much!!!!!

[@ImpatientTurtle]

Looks fucking awesome man. Your paint skills are seriously impressive. Glad Uncle Jessy gave you a shout out, thats how I found you. Enjoy that saber Jessy.

[@BrokenNerd]

Thank you so much!!! I really appreciate it. Oh TRUST me that man deserves more then shout out, he is the man!!!

[@shadizzo4593]

Dude!!!!!!, Keep pumping out videos! I love your work and now because of you my wife is starting to get into 3d printing.

[@BrokenNerd]

This absolutely MADE my day, this is my whole goal is to inspire others to get into the hobby. Thank you SO much for watching, I really appreciate it!!!

[@Ducx66]

Another Home Run! Awesome build!

[@BrokenNerd]

Thank you!!!

[@ChrisSGrindstaff]

The stand and base is awesome, liked the details from the paint.

[@l1zrdking]

I really like Rahm Kota as a character so finding this was great! It turned out so rad, instant-sub for sure.

[@AntonioCorneal]

Awesome dude! I love to model sabers but im only just now trying my first build with electronics. Super cool to see yours!

[@dorkistry]

Dude, you’re killing it. Great video as always. I really love when you build the base to make the prop a full display piece. Makes that saber just beg to be picked up and turned on. Definitely putting this on my todo list.

[@BrokenNerd]

Thank you my friend!!!! Oh man I really excited to see what you come with if you print one!!!

[@crussty3d]

Once again I am floored by the level of detail and the beautiful finishing on these!!!

[@BrokenNerd]

Thank you, I really appreciate you taking the time to watch the video.!!!

[@MrDarkwingUK]

Words just can't describe just how awesome this is. Well done!

[@BrokenNerd]

Thank you so much!!!

[@TBoom8669]

Great work yet again. And very impressed with following through with how the saber community uses the hex screw. Great details and tip for other who may not know or just need a solution.

[@BrokenNerd]

Thank you so much, I really appreciate it!!!

[@makeshaper6259]

Can't say it enough, you're absolutely killing it! Keep it up, love the videos!

[@BrokenNerd]

Thank you so much!!! I appreciate it!

[@sbean4045]

I accidently found this file on thingieverse. I am now printing it though I do not have your skills to finish it I'm excited. I now subscribed to your youtube. I enjoy your videos and cant wait for more! You kick ass!!!

[@ErwalDeeas]

Awesome build and vid!!!! Bravo!!!

[@taos78]

Awesome job man! I really loved the way you explained the whole process.

[@BrokenNerd]

Thank you, I really appreciate you taking the time to watch, it means a lot!!

[@InsideTheMindOfMatt]

very cool would like to get a tour of that room your in some of those helmets are awesome looking

[@BrokenNerd]

Thank you sir!!!! I was thinking about doing one, if I get enough people that are interested I will do one, don't want to make it seem like Im showing off :)

[@Rick_Hunter___]

hi i found your file and then your video. I have printed it in a resin printer. And the model is so cool. Good job and thanks from one Star Wars Nerd to another. 😃

[@Roompje0]

omg dude, that looks fantastic! keep up the amazing work

[@BrokenNerd]

DUDE!!!!!! Thanks so much man, Im so glad you enjoyed the video!!

[@joshuachambliss7718]

Very nice! I really like the storm trooper helmet behind you! Again very nice, keep up the great work!

[@kryptonson]

Wow, very nice. Great detail.

[@themaninthesuitcase]

Excellent video, I've just binge watched all your stuff! You can get blanking plugs for sabres to prevent you blinding yourself or others by mistake just like you did. Or you know, just print one! But as a safety thing many costuming groups will insist on them when a blade isn't fitted.

[@BrokenNerd]

Thank you so much!! I plan on modeling and printing a saber plug

[@richardcorwin5529]

Amazing work Broken!!

[@BrokenNerd]

Thank you sir!!!

[@C3DPropShop]

Catching up on all your vids, I've been impressed from the second I hit play. Love it man, cant wait to see where you go. Up and forward for sure! 🤘

[@MDigitalProductions]

Nice build and attention to detail ! Keep up the great work !

[@8BitLife69]

Just ran into this channel. Bro...you're doing EXCELLENT work. Keep it up. Your props are awesome, and your videos are great. Much better than some of the "bigger name" people on youtube making shit props. Keep it up!

[@BrokenNerd]

Thanks!!

[@mourfette]

I found you from an Adam savage retweet, ended up following you un twitter, then here. your video quality seems as good as your printing quality. Wish I could get this lovely lightsaber. I might try to do some 3D again and make a lightsaber, but I know it won't get printed so it's not enough for me :D keep up the wonderful work, hope you grow big here and everywhere, hope to see you on tested one time!

[@skysthelimit866]

This is incredible, I have been using BAMteck for a long time.

[@BrokenNerd]

Thank you!!!! I bought BAMTeck a few times in the past and loved it but they were a little pricey, but since they dropped their prices, BEST thing that ever happened LOL!!!!

[@davec3275]

Amazing work! Love the design.

[@morrisumali5285]

I found your channel through the 3D Printing Nerd and I'm amazed at the quality of your work. I've shown a few friends and now they want me to make some of the stuff you've done.

[@BrokenNerd]

Thank you!!! I really appreciate it. I would love to see your build if you make one

[@dei-wan-grey3888]

Very cool work my friend I've wanted a STARKILLER HELMET FOR A WHILE NOBODY'S MAKING IT GREAT VIDEO

[@Kincademk]

Just ordered my own CR-10s, can't wait to get it and start makeing cool stuff like this. Thanks for the tips and line in some good filament man. Keep up the awesome work! =D

[@BrokenNerd]

Ohhhh man, get ready for a WHOLE lot of fun LOL. Awesome man I hope you enjoy your printer and Thank you so much for watching!!!!

[@WestBerlinCustoms]

I came here via the puppet video. Your videos are great - nice editing and a cool calm style. Keep on posting them - your channel will grow fast. 😉👍 #PropsForTheSabre

[@thetruthcaboose2293]

AWSOME! AND IT BEING KOTAS SABER MAKES IT BETTER

[@tonylorentzen]

Beautiful work! Came here from Tested's channel. The level of work you do is going to blow this channel up - congrats! ;-)

[@jeffreyknutson]

Found you on Tested with Adam Savage. You two built/made a couple of Knights of Ren costumes. Awesome work! Glad I found you.

[@mythdusterds]

I am now subscribed to your KZbin channel because of the Tested Convention interview on making costumes.

[@Ethan_and_Astra]

Got a great channel here, I'm hoping to get a printer soon and create some videos. Keep up the good work! - Ethan

[@BrokenNerd]

Thank you!!! I really appreciate your support!!!!

[@HFNC2171]

I absolutely NEED a 3D printer, your builds are absolutely amazing

[@BrokenNerd]

HFNC thank you!!! Fair warning it is very addictive lol

[@reforzar]

Holy Snokes!😉 That looks awesome!!!

[@BrokenNerd]

Thank you!!!

[@Kaitech_design]

if you want to duel with it, just take aluminium pipe of 1 inch inner diameter. Model saber to fit around the pipe and you are ready to go :) just need to drill some holes in pipe 1st for switch and retention screw

[@eljeje72]

Nice build! Waiting for my printer to start doing mine :)

[@BrokenNerd]

Oh man get ready for a world of fun when you get yours!! Fair warning it is addictive..Thank you so much!!!

[@zimmy1958]

that was some top notch work there. thanks for sharing (subbed)

[@Applesupnorth]

Beautiful!! I wonder if using PETG or something like MakerGeek Raptor PLA would allow dueling without breakage 😈😈

[@BrokenNerd]

Thank you!!! I never printed PETG or the MakerGeek, thats something to look into.Thanks for the info!!!

[@Applesupnorth]

Broken Nerd sure thing 👍 I just got some Raptor PLA in the makergeeks subscription box. Haven’t tried it yet, but supposed to be stronger/more heat resistant than abs. PETG is supposed to basically replace abs now, stronger and easy to print like PLA. Try it out and make something else amazing please 😂😂

[@HittoTheAssassin]

Rahm Kota is my favorite character

[@DymoPolska]

Hey! Do you mind sharing what you use for 3D printing timelapse? I had to get a little creative with my DLSRs 30min limit 😂 Love your videos! Infinity Gauntlet intro is great :D

[@johndoe-kh4el]

Very cool i was wondering if you could do something from justice league (like tech,gadgets or just something you wanna make)

[@BrokenNerd]

Thank You man!!!! You have any prop in particular in mind? I do have a file for Batmans grappling gun.

[@johndoe-kh4el]

Broken Nerd that would be cool there are also big prints like aquamans trident and cyborgs particle cannon

[@stevev8592]

Great work!! I was wondering what the material is that you printed with? I didn’t see the link in the description. Thanks!

[@MikeRiveraN7]

Love that Base, you got some mad skills!! Is that for sale on your Etsy page? I own a CR-10 and a Monoprice Maker select V2 and mostly use it for miniature gaming and board game accessories but you have inspired me to do more. thank you and good luck on your channel. I also subbed on your bros channel as well.

[@BrokenNerd]

Thank you man!!! The lightsaber files are actually on Thingiverse for free. Im so glad you decided to do more, please share pics of your work if you can!!!

[@jedishadow4083]

Broken Nerd, awesome bro u just made my day! Could u plz send me a link... And when will the next saber build air? Will it be a Sith build?!

[@ObiBrownKenobi]

Actually doing this project right now, I have the progress on my KZbin channel. Really impressed with how the print came out, thanks for posting this up. #RhamKotaOriginalBlindKnight

[@thecreatorx3d439]

You are fucking incredible!!! Keep up the awesome work bro.

[@BrokenNerd]

BRO!!!!!!!!!!!! Thank you so much man!!!!!

[@hempstead.studio]

Keep it up dude. Stoked on these, would be awesome to see some more in depth modeling in future videos!

[@BrokenNerd]

Thank you!!! I will try my best to go into the modeling aspect of the process more in depth

[@zanderroe1708]

Can I get a link to the filament you use to print it. It looks so good and it made me want to print my own saber!

[@TheSomar1991]

Awesome

[@BrokenNerd]

Thank you!!!

[@ericadams5019]

Great vid! Awesome build! Did you post the STL's somewhere?

[@callofthewintermoon]

Wonderful job! Looks amazing!! New sub here, thanks for sharing.

[@rogue1874]

That really is a beautiful rahm kota lightsaber. I would like to try and make it could you tell me how I can get the 3d printed file and electronic parts.

[@jflugum]

Looks awesome! I would like to see you do some Black Panther props next.

[@BrokenNerd]

Thank you so much...I have four BP props planned for the month of February

[@jflugum]

Can't wait to see what you make next, keep up the awesomeness!

[@MrRedThread]

Awesome build truly. Will you be bringing out a tutorial on how to make your own? I was confused when you said the infill was 100% but how do you place in the led parts. Cheers dude

[@Toothandtalon]

hey whats the link to the pla you used?

[@stan22786]

Another great build dude. Can't wait to see what's next. If you are looking for an idea, maybe something from destiny? Or Blade Runner

[@BrokenNerd]

Thank you!!! I really appreciate your support!!! I would love to do something other the Star Wars and Marvel, Blade Runner is sounding good!! :)

[@stan22786]

Go for it. I think it would be sick as hell if you did something from Blade Runner.

[@jamiewilliams4212]

Revisiting this years later! Did you use the outter rim sabers stunt 3w kit electronics from etsy? The link is long expired

[@stanleydegraef4442]

This is so awesome + where did you buy the blade i'm very curious

[@joaofelix7400]

Hi, top top top video ;) and awesome job! I have the same printer that you have, CR10, what slicer do you use, Cura?

[@oleksy_w_w2672]

Very cool build, do you think if it was printed in PETG or Nylon it would be combat capable?

[@BrokenNerd]

Thank you!! Not sure as I have never printed with PETG or Nylon but I do hear they are stronger then PLA

[@Various-JG]

This is awesome! I just printed it for myself. What size blade did you use is it the 1inch or 7/8".

[@jasonmarr9578]

that's cool and all, but do you know whats better? adding the link to the STL you used, and if its your own, you could upload it and sell it

[@CoasterRob]

Do you have any 3d printed lightsaber hilts that are compatible with saviis chassis from Galaxy's edge

[@AbsolutRoyal]

Hi, such an awesome build :D I like it very much and try to rebuild it for myself. But I have a question. Those set screws you use for the lower part of the hilt and the blade to hold in place, what size are those two?

[@HFNC2171]

I’m Uncle Jessy’s video where he got the lightsaber from you, he points it right into his face lol. Just like luke does. Made me laugh

[@BrokenNerd]

LOL

[@austindelosreyes]

I know this is an old saber but how is it holding up? Is it fairly sturdy, not for dueling or anything but for light swinging? (With it being completely 3d printed)

[@mikebrucken8740]

Thanks for the video! How or what do you use to make the blade itself?

[@buzbeediddle7846]

Yes! What printer do you use!!?

[@BrokenNerd]

Thank you!!! the amazing CR-10

[@pilksuk]

So cool what Dimensions did you use so that the electronics fit? hilt, emitter, pummel length and internal diameter? going to try and design my own lightsaber and print it off :P

[@RevampedOutdoors]

That..is...ridiculously...good. Sub'd.

[@BrokenNerd]

Thank you so much!!

[@bobthebuilder3221]

Can you show or make your ultimate Thor's hammer I want to see it the files look really good

[@BrokenNerd]

I actually printed it already, just need to finish it, I did not get footage of the actual print but I may do a video of the finish, and Thank You!!!

[@sevenaguulik6786]

How would you recommend making a dueling capable saber?

[@shadizzo4593]

Hey Broken Nerd, I order BAMtack PLA on your recommendation. How hot do you run it? On my anycubic i3 Mega, BAMtack PLA keeps jamming it.

[@XtremeTrinity]

what is the paint you use for masking? the pink bottle.

[@richardbennett8678]

Where did you get your electronics? How much were they?

[@beaucopeland243]

You have a link to the button/wiring setup or you make that yourself?

[@toonamikid]

Hello what 3d printer do you use?

[@RJMaker]

Ah nice the Jedi Side... :-)

[@BrokenNerd]

Thank you!!

[@2244P]

I have two questions: What kind of 3D printer did you use? Also, is the lightsaber for display only or can you duel with it?

[@garrettpavao2656]

He has I believe Two CR-10 printers, and the saber is recommended for display only.

[@12Tie]

what did you use to hold the blade in place?

[@themightyharith3288]

Are you using the cr 10

[@BrokenNerd]

Yeap!!!

[@themightyharith3288]

Broken Nerd is it easy to use the cr 10 printer

[@alexmazurek18]

Where can I buy the model?

[@twogoblinstall894]

What kind of PLA did you use?

[@jasonbaker541]

Great video! Where are the STLs for this? Can't wait for your next video!

[@BrokenNerd]

Thank you sir!!! They are coming soon!

[@colemasterofearth964]

Do you put pvc pipe inside of it

[@levoyageur7157]

you can make the lightsaber ahsoka tano star wars rebels

[@TheSomar1991]

Would you print something form new avengers?

[@BrokenNerd]

OH FOR SURE!!!! Waiting for them to drop a pic of Thor's new weapon

[@NothernLight0]

Hey Man, just discovered your videos. Love it, the kind of video editing you do is good. However to gain more subscribers i would suggest to do some replica from stuff from animes and japanese video games and or blizzard stuff. Im pretty sure you d gain lots of followers. Keep the good work up.

[@TheSomar1991]

Did you quit or something?

[@DagrtOne]

You beed a b-roll to showcase your lightsaber at the end.

[@krypto7996]

Where are the stl files