3D Printed Lithophane Lamp Shade - Custom DIY Design

[@RcLifeOn]

Hi, I hope you are doing great! I thought I would share a quick update with you. I'm currently working on three major videos I'm really looking forward to show you guys! A 3D printed RC airplane V2, driving on water V2 and for everyone that miss my DIY electronic videos, I'm also working on a peltier liquid cooler. Hopefully I'll receive the parts from Ebay in a week or two. Have an awesome day! /Simon

[@Kaktus.15]

please make a rc 3D airplane. Das wäre cool.

[@Kaktus.15]

please make a rc 3D airplane. Das wäre cool.

[@Kaktus.15]

this video was veeeery cool. You can also make a special icecube shape/ form. :)))))))))()))))9

[@carlofrezzotti8439]

The video content is awesome, the editing is awesome, you are awesome.

[@threebreak6303]

Ur one of my favorite youtubers sorry but today u made a mistake u said chack the last video up and u didn't suggest it

[@jordanletchford9139]

Hey all, if you where as confused as me and could not work out how to make the "solid cylinder" hollow, I worked it out! if you change the model to do 360 degrees and place the type onto outer curve you will get a hollow cylinder. There we go and thank you RCLifeOn for this video. love your projects keep it up

[@luisarturo3400]

WOW MAN! THAAAAAAANK YOU SO MUCH!!!

[@pibb69173]

I just cant get over that sweet workspace.

[@The_Real_JimmyG]

After being on the fence about buying a printer this video sold me on one. This printer to be exact.

[@BENBTL2000]

When my mum saw my prints I did after your first video went up she said it would look amazing as a night light! Great videos, thanks.

[@harrisondelaine7719]

Thank you for making these videos about Lithophanes! I learned about them from you, and am currently printing a lithophane of my girlfriend and I on my CR-10. It's been going for 3 minutes. Fingers crossed!

[@dguy-xk4fc]

Omg, this again is some cutting edge technology i was not aware this was even possible, just great man!

[@ChunkySteveo]

Great project Simon, looks amazing! I love doing Lithophanes with my printer, it never stops amazing me to see people and photos just emerge from the plastic when you light them. Currently doing a back lit photo frame version with battery (18650) powered LEDs.... Steve

[@ohkanashii777]

Dude that looks amazing

[@sebastiandobrick9639]

Amazing !!! Can´t belive how great it turned out.

[@jmtx.]

Damn cool! Now I need to go get some old lamps.

[@BrownMInc]

Each video only gets better! You're becoming a favourite!

[@ukg1212]

This guy has the best 3D printing skills.

[@Lensman64]

Jeez, I'm only 6 years late to this party. Well better late than never. Nice prints!

[@_K-G-P_]

Moscow! Wow! Appreciate it. Very nice print.

[@kevinaldcroft6291]

Fantastic these lithophane lampshades are great I can not wait to try it out. I just need to get some white PLA. Thank you for the links. Cheers.

[@YMS137]

Very cool. You convinced me that I can make something useful and I have ordered my CR-10!!!

[@ravenclanx]

By far one of the neatest things you can do with a 3d printer.

[@jakobguarini4119]

Thank you sooo much! You are part of the reason I started 3d printing! Your videos are awesome! Keep it up!

[@kadedugas2269]

Awesome lamp shade! I'll have to try that.

[@alanbremm68]

Hey man I bought my First 3d printer last month and I enjoy It so much... congratulations to the channel, I'm so exciting to make my First lithophane too and Hope do It soon.

[@jacobrollins37]

Thank you for the great video. I have been wanting to make a lithophane lampshade and I think this video will put me in the right direction.

[@mattsonmccraw6767]

I am really excited about that peltier liquid water cooler that you mentioned on your comment!

[@deathsmilez5297]

Thx now i know what to print for Christmas presents xD

[@studioreviews2649]

That looks SICK

[@mihaiburaciuc1288]

At 1:38, there is a gap in the back, you can fix it by going to curve and type 361 or 362 instead of 360 (it works)

[@chairhappy3838]

From your last video on this, I was going to do 4 "outer curves" with 4 separate pictures and glue them into 1 cylinder and make a lamp shade. Awesome!!!!!!

[@andrewavdikos4110]

My friend you are too good... And yes 3D-Creality is the best printers owned , over 13 x 3D printers till know... Keep the good work... We are watching you ...

[@diogosoares360]

Dude, that's so awesome. Great work men.

[@christeamhound]

OMG!!! i sent you a message on facebook asking is you were going to do anymore electronic projects and i feel like you have literally replied on video :) Love this channel!!!

[@craigs902]

Haven’t done any 3D printing but this makes me want to get one for sure.

[@rickjr111589]

BRO!!! that would be cool to do in like a Game of Thrones map type looking shade!

[@MegaKencam]

I like your stuff. I wish I could use your video's as inspiration for the kids in my 3D printing class.

[@RcLifeOn]

Of course, go ahead 👍

[@MegaKencam]

I actually can't. I can show no drug references or profanity (even bleeped) to my class. I'm going to go through your vids tonight and see if there are some I can use.

[@rockydotson31]

WOW you are so talented! every time i got to design something I sike myself out and get overwhelmed... and advice on a noob with 2 printers(how have i never designed anything) would be greatly appreciated...

[@christelledeneau7461]

Simply beautiful !!

[@JamieBainbridge]

This is super cool. I like your videos where you do projects and try new things. I think the market has been flooded with Gearbest-sponsored unboxings and reviews of the same shit over and over. Keen to see your RC projects next!

[@spikekent]

That is fantastic, I'm seriously gonna try this.

[@Sembazuru]

Check out the Ikea Lampan table lamps to use as bases for these type lamp shades. The original shade of the Lampan lamps comes off normally for access to replacing the light bulb. Simply replace the original shade with the printed one.

[@alfiolocatelli5093]

Nice idea simon

[@amashikha8570]

120 k soon !

[@CrzyZeke]

Dude, you crack me up! And the lithophane prints are amazing. What are some of your other social channels so I can share my prints? And get a better camera that can capture how that lampshade looks. I mean you are a youtube professional now :)

[@porschepanamera92]

Dude, you're really convincing me to get a CR-10 and dive into the 3d printing world! It won't be long anymore until I'm going to buy one impulsively and regret it when it doesn't work as fluently as it seems to do in your videos lol. I just wanna design in fusion and print that stuff!

[@DefaultFlame]

Looks amazing.

[@CorbettxD]

"sheck it out" lol. Your humor is great and your videos are great

[@luckylarz4269]

Wow!!! That is absolutely amazing! Good job man keep up the vids!

[@scotte1681]

Very cool! Some day I will have a 3D printer ...

[@elijahbennett88]

Well, hello there Christmas present - awesome video and awesome idea - can't wait to try it out!

[@Speeder84XL]

That looks awesome!

[@mpls675r]

I just order a cr10s because of this video!

[@riversbenson8026]

That is raw!

[@hillbillyherper9840]

Dude, sick!!!!!

[@nathan1sixteen]

Have you tried putting the "picture" side on the inside so that the outside of the shade is smooth. I think it would be cool if it looked like a normal lamp shade when the light was off, but then you turn the light in and BAM and you can see the design.

[@mialvarez519]

you’ve inspired me; great job!!!

[@rawestmoreland]

Can you post the lamp shade holder? I’d love to print one

[@JAYTEEAU]

Awesome work

[@dibraniuk]

Man awesome stuff you make! I'm printing my first ever 3d!!! behind the world I am:)

[@daniel2000dn]

Love your work

[@EndermanTheMan]

That's so awesome!

[@nidzdotnet76]

I have one of these printing right now.. It's amazing..

[@av9149]

Great video!

[@jamesclark52]

1:36 none has ever looked so awesome holding a lamp 😀

[@mralabbad7]

5:28 *

[@aimanharani5093]

Really awesome...Thank you for sharing this! cheers

[@tsumetaitenshi]

This is awesome!

[@MattKirk007]

gray Enomaker pla makes really good lithophanes

[@ItsOnlySTU]

legend i just came from one of your lithophane vids and typed in lithophane lamp and here i am lol

[@FaraidunHawramy]

so so amazing idea. you are so smart.

[@arifanwari3168]

Wait till the glass transition period is met about 52deg+ won't be much of a shade left. It will get to that temp will prolonged usage.

[@josephschmoberg6778]

Love your videos, they are a lot of fun to watch ... I learn a lot too '- )

[@dasulanilanjith5235]

WOW... Super Video

[@Tomytoka]

you are the best youtuber to me because you are around my age and do cool and easy things to do

[@BitcoinBitz]

Wow Awesome!!

[@vladimir_xzact_kurwa3555]

Hey hey hi there pal! I have seen ur Peltier cooler video ..thats awesome btw I wish you can keep up with some probjects like that thats awesome .like electronics based more videos based on in electronics so plss bro do it upload videos like that and I will love it vid to watch ...

[@adamd1556]

Awesome video. I'm thinking of doing on of these as a birthday gift for a family member but I'm worried that PLA will start to sag over time with temp from the light. can ABS be used?

[@hustinwinner7890]

Nice video your the best!!

[@tonypilborg]

I actually thought of a lamp shade when I watched the last video - but with the extra thickness on the inside of the cylinder - to make it more stealthy... My own printer can not do a big enough volume, so I hope you would consider another one??

[@jaimanbhardwaj1679]

why don't you just make one your self and scale it to fit your lamp

[@mimked]

Another thing to consider is making the lamp shade with several of the simple curved lithophanes that you then somehow tie together. That way you don't need as large of a printer bed to make the same product. Another video I saw when looking for this one has the idea of using small, flat lithophanes to make a box with LEDs inside. Maybe that would be more within your capabilities.

[@Loyd_L13]

Great job

[@BNLcy]

hey simon plz do a 3d printed racing drone. thanks, this is one of my favorite channels

[@MCsCreations]

Really nice! :)

[@HOMEMELI]

Why you don't do the same thing but make it like an Earth

[@leonburstrom2523]

thats cool

[@maxhammerum7705]

HOME MELI cool but would be very hard to print with no internal support

[@joeg6242]

You could do it if you split the earth at the equator and printed each hemisphere separately , pole sides down. I use a bfb 3d touch printer and do hemispheres all the time with no support...

[@mpikas]

Pole sides down? I'm guessing you use a raft or something to anchor it down? Have you tried pole side up? Did it fail?

[@bxruan]

He did do that, And it looks awesome! Here's the link kzbin.info/www/bejne/j5vOgWR4mNx_hKs

[@shijuroyan9244]

Hey Simon there is a new purse 3d printer which enables us a cheap soluble element for the extra structure

[@d.cypher2920]

Dude....nice!!

[@pits5013]

great job , keep it up

[@ColesAnimals]

I have a business just selling to my friends and kids from school and I was wondering if using the lithophane maker would be okay if i sold them for print time? A video whats okay to sell would be really cool!

[@isozero7265]

Luv it. You Rock!

[@ABitOfTheLot]

great Idea. does the heat not cause a problem for the PLA?

[@Inventorsquare]

Brilliant!

[@memoryLeak-CODE]

good video. You are amazing!

[@samwichvr485]

I had this idea forever ago!

[@cjgriffin1989cg]

love your work made one of me and granddad thank you

[@thieu714]

I use simplify 3d also. How did you get the cylinder so thin? I noticed it was set to 3mm. But it looks so thin. When i enlarge the print in simplify 3d, it makes the walls so thick and light cannot get through. Help..thanks..

[@kuriositykid2294]

Please do a review on the TEVO Tornado Thanks

[@SteveNilsen]

So cool! Have you heard anything about the upgraded Creality CR-10 Golden printer with two motors the print axis?

[@netwolfstar]

This is just awesome , next on my list to print. Thx. btw I have a Panao landscape but it's night time shot I took, would you still make it a negative??

[@not_donovan]

I'm wondering what brand of filament to use for lithophanes.. I used matter hackers pro pla but it was hardly translucent. I had a sample spool that came with my cr-10 and it worked great but I ran out

[@alienpaul4592]

iv got some pics taken with google cardboard camera i think there more inside looking out rather than outside looking in might be worth a try tho

[@blaublau6707]

Hi, which base are you using in that Video as it does not lock like the original.

[@robertobaggio6423]

When the print was scaled up in your slicer did the thickness of the wall increase? What would the settings to print be in Cura 3.4?

[@zhvtlt]

good job, friend

[@mcdus1441]

Real good video as Always... totally pro! :-D

[@alibadreddine933]

Buddy, I keep getting a solid cylinder. How can I make it hollow? Please help, it will be my greatest project yet.

[@owentorgerson]

Me too

[@alejandrobailon1761]

Are you using the outer curve at 360 degrees? I mean, if you still care