3D Printed Mini Outboard Motor + Propeller FT009 RC Boat

[@billjonesnation]

Very nice build. It's hard to find an outboard motor prebuilt so this is a great option.

[@Mr.RC-Creator]

@Bill Jones Nation Thanks.!!😁

[@NoMatterDesign]

Just printed your model in PETG-CF and PLA (for the cover) at 125% for a 1/8 scale. Really good option as a test motor. Works a treat, so far nothing exploded or melted. Might upgrade the bevel gears to brass tho. Cheers

[@Mr.RC-Creator]

Sorry for the late reply. I'm glad you like it.

[@stevejackson3564]

Awesome print. Can you put metal gears in. Wonder how long the plastic ones will last. I'm sure this took a good while to do.

[@Mr.RC-Creator]

ฺฺI think this could, but need to find metal gear a similar size.

[@rooblegiron9080]

Desde florencia caqueta Colombia un gran saludo

[@JurplasticWorldDioramas]

I'm a new subscriber. I built this out board motor but I threw in some brass gears. I have a video out with it on a small boat runs amazing thanks for sharing this.

[@Mr.RC-Creator]

Yeah; It's great thank you for subscribing.

[@ernstbloemendaal299]

Great design and build Only wondering why de wires stick out at the back in stead of the front

[@Mr.RC-Creator]

Thanks so much I was just testing.🙂

[@rooblegiron9080]

​@@Mr.RC-Creator Hola buenos día

[@ΣπυροςΠουλιασης-γ9ω]

very nice work!!could you please tell us the electronics setup-connections???

[@Mr.RC-Creator]

Thanks. 🙂Connecting the receiver means connecting the first channel which is the rudder, the second channel is the throttle, the speed controller is connected to the second channel and the servo is connected to the first channel

[@dennyreeves9816]

That's Flipping cool!

[@Mr.RC-Creator]

Thank you so much🙂

[@peterfitzpatrick7032]

Great build !! 🤗 A spot of vaseline petroleum jelly on the gears might make them last longer... it makes a great lubricant & unlike normal greases, it doesn't cake and go hard... 😎👍☘️🍺

[@Mr.RC-Creator]

I am so very grateful for your guidance,

[@buyamerican3191]

Nice looking egg beater you have there!

[@Mr.RC-Creator]

Thanks.😁

[@rigididiot]

No thrust bearing???? Won't be long before the thrust is pressing the bevel gears together...

[@Mr.RC-Creator]

No bearing, I'm looking for a replacement metal gear.🙂

[@rexycontemplates]

it seems like you resized the files in order to fit the gear to the 3mm shaft, or did you not? the diameter is 5mm in the printed gear.

[@Mr.RC-Creator]

You can adjust it by 55 percent, if I remember correctly it is 3 mm in diameter.

[@rexycontemplates]

@@Mr.RC-Creator 55% percent resize? the shaft Outer diameter should be 5mm and inner is 3mm

[@bitsurfer0101]

Could you use PETG for the gears for better wear resistance?

[@Mr.RC-Creator]

I think that would be good

[@NoMatterDesign]

I did. PETG-CF They didn't melt yet.

[@stoojinator]

How come you poked the wires out the back rather than the front of the motor housing?

[@Mr.RC-Creator]

I was just testing it working😁

[@YetAnotherRcChannel]

Yeah. Love it! Great work!

[@Mr.RC-Creator]

Thanks🙂

[@Mad.Man.Marine]

Cool. But why have the phase wires come out of the back? Out the front would be more realistic.

[@Mr.RC-Creator]

Thanks so much I was just testing.🙂

[@queenofpain6483]

What’s the purpose of the brass tube? Can I use bearings instead?

[@Mr.RC-Creator]

Support the axle or you can provide bearings instead.🙂

[@queenofpain6483]

@@Mr.RC-Creator thank you, where do you buy all the rods? Online?

[@Mr.RC-Creator]

@@queenofpain6483 Yeah! 🙂

[@mxwild1085]

It's amazing. Great dude

[@Mr.RC-Creator]

Thanks😁

[@richardbillhartz4537]

Wires need to exit the shroud on the boat side, not rear of the cowling, otherwise spot on!

[@Mr.RC-Creator]

@Richard Billhartz Thanks😁

[@richardbillhartz4537]

@@Mr.RC-Creator It's the best outboard on the internet, I'll print one when you post the files, thanks!

[@Mr.RC-Creator]

@@richardbillhartz4537 www.thingiverse.com/thing:3534935 thanks!🙂

[@michaeloxlong]

Why not aim the wires the other way? Like...into the boat instead of out the back of it?

[@Mr.RC-Creator]

Thanks, I was just testing

[@Александр-е7г9с]

Было интересно. Вот только мало в этом смысла. Попробуй сделать корпус лодки, установить, сделать измерения тяги, нужно будет увеличить длину дейдвуда, сделать антикавитационную плиту. А так конечно полще сделать просто мотораму и установить на дно лодки. Сделай водомëт!! Будет круто и можно использовать.

[@Mr.RC-Creator]

Я очень благодарна вам за ваше руководство,🙂

[@Александр-е7г9с]

Ещё рекомендую использовать подшипники от RC моделей.

[@phinok.m.628]

Your 3D prints are totally under extruded dude. :D

[@Mr.RC-Creator]

Thanks.😀

[@x-manproductions3278]

Nice job would love to use this on my 3d printed boat, i wonder what it would be like printed in resin?

[@Mr.RC-Creator]

Thanks! resin will printable, the surface is much smoother.

[@helmutmayr5476]

Verry cool

[@Mr.RC-Creator]

Thanks.😊

[@paulb9769]

That seems to have a lot of thrust would love to see it on a boat

[@Mr.RC-Creator]

Thanks you see this on a boat

[@paulb9769]

@@Mr.RC-Creator Have you done it yet?

[@Mr.RC-Creator]

@@paulb9769 I'm done.

[@Mr.RC-Creator]

@@paulb9769 I have done it!😁

[@EthanHeffernan-gx7bs]

Is there a different engine u could use I can’t find this one

[@Mr.RC-Creator]

Sorry i reply late Link 🙂www.thingiverse.com/thing:3534935

[@SchiffsmodellbauLu]

Hallo..gibt es die Stl Dateien irgendwo... danke Gruß

[@Mr.RC-Creator]

www.thingiverse.com/thing:353... 🙂

[@SchiffsmodellbauLu]

Danke super vielen Danke Gruß

[@SchiffsmodellbauLu]

Danke viele Grüsse aus Deutschland... Germany...3 d Drucker läuft schon

[@sapolab_diy]

Very nice clean job!

[@Mr.RC-Creator]

Thanks😁

[@Soshstar999]

Need to build a volvo penta twin propeller outboard and inboard outboard system, 70% more efficient than a single blade propeller

[@Mr.RC-Creator]

I am so very grateful for your guidance,☺

[@олеголег-э3е5о]

Все хорошо,, но через валы воду будет поднимать наверх

[@Mr.RC-Creator]

большое спасибо😁

[@K47山尺卂爪]

Good afternoon, how can I buy this outboard motor from you, it’s just my birthday and I really want such a motor, but I looked at ebeu but it’s very expensive there

[@Mr.RC-Creator]

May you have a good day! www.aliexpress.com/item/1005003725119536.html?spm=a2g0o.detail.0.0.2479ELPgELPgMx&gps-id=pcDetailTopMoreOtherSeller&scm=1007.33416.274820.0&scm_id=1007.33416.274820.0&scm-url=1007.33416.274820.0&pvid=a6de3887-6822-46fb-8df1-26d49e690fcd&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.33416.274820.0,pvid:a6de3887-6822-46fb-8df1-26d49e690fcd,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000026945066270%22%2C%22sceneId%22%3A%2223416%22%7D&pdp_npi=3%40dis%21THB%21512.63%21512.63%21%21%21%21%21%402101d1b316805242378001213e0038%2112000026945066270%21rec%21TH%21173671390 www.aliexpress.com/item/4000121770043.html?spm=a2g0o.productlist.main.35.474662d1hSCecx&algo_pvid=4150dbe8-764d-4e34-aeb7-36bdcc351c29&algo_exp_id=4150dbe8-764d-4e34-aeb7-36bdcc351c29-17&pdp_ext_f=%7B%22sku_id%22%3A%2210000000334965691%22%7D&pdp_npi=3%40dis%21THB%21273.06%21259.39%21%21%21%21%21%4021227f0f16805234863718291d087a%2110000000334965691%21sea%21TH%21173671390&curPageLogUid=f1K4eRUNb6Km

[@mariaparra1620]

Yo lo quiero 😮😮😮

[@Mr.RC-Creator]

No vendo Lo siento, gracias por tu interés.🙂

[@mariaparra1620]

😢😢😢😢😢😢nooooooo

[@АндрейФурманов-р4я]

Хороший мотор! Как такой сделать? Где найти программу для 3D принтера?

[@Mr.RC-Creator]

Какой тип 3D-принтера вы используете?🙂

[@douggordon3096]

Very nice what are the measurements will you print some more for customers

[@Mr.RC-Creator]

Thanks! I measure the length of the Tube and drive shaft to be cut.🙂

[@ganeshpingle.8423]

Hello Sir I am a student From india i am see your this video (Wiper Moter as a servo.)and i have some small Queshion in that can you please please help me to give the answers...??

[@Mr.RC-Creator]

I will definitely recommend it to you.

[@leplaisiraletatbrut1513]

BONJOUR AVEZ VOUS DES LIENS POUR L ARBRE DU Moteur hors-bord SVP MERCI

[@Mr.RC-Creator]

www.aliexpress.com/item/32998148718.html?spm=a2g0o.productlist.0.0.2bcd7213bv3k18&algo_pvid=c5815ea9-8fe8-4163-89ab-f51b516fa2a5&algo_exp_id=c5815ea9-8fe8-4163-89ab-f51b516fa2a5-18&pdp_ext_f=%7B%22sku_id%22%3A%2266917595769%22%7D&pdp_npi=2%40dis%21THB%21222.01%21222.01%21%21%21%21%21%402103255b16706672334093275e7526%2166917595769%21sea&curPageLogUid=nnd9v0eB1HnY www.aliexpress.com/item/4000337533587.html?spm=a2g0o.productlist.0.0.69fb3010fDv9Ph&algo_pvid=26e29f39-62dc-4e02-98aa-8a10743191ce&algo_exp_id=26e29f39-62dc-4e02-98aa-8a10743191ce-35&pdp_ext_f=%7B%22sku_id%22%3A%2210000013712811036%22%7D&pdp_npi=2%40dis%21THB%21147.66%21118.13%21%21%21%21%21%402101e9d316706672842193584e653f%2110000013712811036%21sea&curPageLogUid=lnuEH8Qcn1Jr

[@leplaisiraletatbrut1513]

@@Mr.RC-Creator AVEZ VOUS LE LIEN POUR LE MOTEUR AUSSI MERCI LE TOUT EST POUR UNE REDUCTION A 65 % ?

[@leplaisiraletatbrut1513]

PS ET LE RACORD DU MOTEUR A L ARBRE MERCI BEACOUP

[@Mr.RC-Creator]

@@leplaisiraletatbrut1513 www.thingiverse.com/thing:3534935 🙂

[@pointer1829]

That cavitation plate looks a little small tbh

[@Mr.RC-Creator]

Yep.. Thanks.😁

[@Kezooxinua]

+гибкую соединительную муфту и железные шестеренки

[@Mr.RC-Creator]

Да, вместо этого я ищу металлические шестерни.

[@ruslankerget]

@@Mr.RC-Creator присмотритесь к шестерням от дифференциалов автомоделей масштаба 1:10 или 1:12

[@Mr.RC-Creator]

@@ruslankerget Я очень благодарна вам за ваше руководство,

[@A3Kr0n]

I've got an old die cast engine like that, but I don't run it.

[@Mr.RC-Creator]

@A3Kr0n Great, you should probably use it.😁

[@ljsbean2705]

That cavitation plate is doing nothing, the prop should be under the plate not behind it

[@Mr.RC-Creator]

Thanks. 😅

[@ljsbean2705]

@@Mr.RC-Creator No Problem, it's a minor thing that not too many people are aware of

[@leplaisiraletatbrut1513]

BONJOUR JE N ARRIVE PAS A TROUVER LE MOTEUR ET CONTROLEUR POUVEZ VOUS ME M ETRE UN LIEN MERCI

[@Mr.RC-Creator]

Vous pouvez utiliser le moteur et le contrôle de vitesse dont vous disposez. hobbyking.com/en_us/turnigy-aerodrive-sk3-2118-3100kv-brushless-outrunner-motor-1.html

[@anakkecilrantau]

can i order?

[@Mr.RC-Creator]

Thanks. but I don't sell it.

[@TalibIbno]

Macam mana kalau mau order..

[@Mr.RC-Creator]

Sorry for the late reply. Thank you for your interest, but I'm not for sale. Sorry.😁

[@baharndut3561]

Berapa harga kompetensi, mesin tempel.

[@alfonsoromero4458]

Donde los puedo comprar

[@x-manproductions3278]

also can i get the print files?

[@Mr.RC-Creator]

Link www.thingiverse.com/thing:3534935

[@ARCparamodels]

It's great! What boat will be?

[@Mr.RC-Creator]

@@ARCparamodels I have no idea.😅

[@ARCparamodels]

@@Mr.RC-Creator ahaha

[@Mr.RC-Creator]

@@ARCparamodels But there has to be.😁

[@sarimanbk337]

Ling pemesanan nya di mana bang

[@Mr.RC-Creator]

Not for sale, but you can do it yourself!

[@LygerTheCLaw]

your prop is taller than your aeration plate, gonna suck air on plane.

[@Mr.RC-Creator]

I am so very grateful for your guidance,🙂

[@imamalfaisimamalfais1631]

Bangbikinindobang🙏🙏🙏

[@joegomez4408]

Can you share the file

[@Mr.RC-Creator]

@Joe Gomez www.thingiverse.com/thing:3534935

[@cselektronik-bn5dg]

Bisa order kak

[@Mr.RC-Creator]

Thanks.😊

[@saddam_ilmi]

Cek harga bg

[@NevskiyVladislav]

Это очень быстро сломается.

[@Mr.RC-Creator]

Я ищу металлические шестерни для замены.

[@NevskiyVladislav]

@@Mr.RC-Creator надо делать гибкий вал.

[@Mr.RC-Creator]

@@NevskiyVladislav Это хорошая идея. Большое спасибо.

[@AhmadSarwani258]

8isa d beli d mna

[@ilhamhakim9388]

Bisa pesa

[@Mr.RC-Creator]

😁

[@MariaParra-f7y]

Me regalas un pliss

[@Mr.RC-Creator]

www.thingiverse.com/thing:3534935

[@RahmanRahman-qf3ri]

Dijual gak bag

[@Mr.RC-Creator]

Yes. 🙂

[@พีระวุฒิ-ฃ5ณ]

มีขายไม่ครับ

[@Mr.RC-Creator]

ไม่ม่ครับแค่ลองเทสครับ

[@ayca2557]

all measurements are wrong where is 58mm 37mm 3mm all wrong

[@Mr.RC-Creator]

Thanks.🤣

[@พีระวุฒิ-ฃ5ณ]

มีขายไม่ครับ

[@Mr.RC-Creator]

ไม่มีครับ แค่ทำทดสอบการทำงาน😁

[@พีระวุฒิ-ฃ5ณ]

มีขายไม่ครับ

[@Mr.RC-Creator]

ไม่มีครับ แค่ลำการทำงาน ...ครับ