3M™ Tech Tips: Damaged Panel Repair Process Episode 6: Final Filler Sanding

[@boyanbyankow5192]

Hi do you use DA sander over the filler after block sanding with 150/180 or the glaze can be applyed directly on block sanded repair area. I was comented before days other video here is the part where i doubt i my knowlege and i'm not sure do i work properly. I know that the glaze is with finer structure this mean fills finer sanding marks but in that case on top of what sanding marks is applyed on the metal and the exsisting filler on the repaired area 150/180 both( block sanden or da sanded)? I realy will be very happy if i recieve answer from your team. Wish you everything best

[@deankay4434]

Question; Was the last sander with finer grit paper actually a short-stroke sander with a 5/16th” orbital action? Thanks!

[@johnfeeney7782]

What's the part number of that dust extraction block please

[@3MCollision]

Hi John, the part number is 05208. You can check it out here: www.3m.com/3M/en_US/p/dc/v000074252/?preselect=3289659365

[@youngkyrie2263]

I am the body shop 😂