Sig Sauer Vs. Glock

[@3of7Project]

Make a purchase for your chance at a Dream Vacation Giveaway at vnsh.com/3of7project

[@clifblake]

Im not able to get past the giveaway pop up on this link.

[@johncarter6238]

This malfunction in the SIG weapon. It could cost you your life. I have been shooting my Glock 17 Gen 1 for 40 years, fired over 100,000 shots. NEVER had a malfunction once. So yes, I can trust a Glock with my life

[@randymickle1091]

As a former LEO, I carried a Glock for 10 years, and have owned a Glock 22 for over 20 years, never had a malfunction. That being said, my EDC is a Sig 365XL, and it is way more comfortable in the hands. Love the channel, and your message. Thank you for your service.

[@wissn2112]

Same. G23/19 fan. But the XL is my new carry. G seems to roll out of palm since I have smaller hands. The XL falls into my hand and is firm.

[@afternoondelight6322]

Yup 365 xl feels great stuffed up against my junk for sure.

[@anthonysantisi4218]

I edc a p365 xmacro and have around 2k rounds through that gun without not one issue. Also my p320 xcompact has 5k plus and same. Not one malfunction. Really sucks to hear all the sig hate out there... I gave the g19 and the 43x with the 15rnd conversion and sold them both right away. That being said the 43x is about the only glock I would ever own and still not shoot or carry ever over the x macro

[@HHI455]

Comfort over reliability?

[@atomicpsych0]

​@HHI455 bet he's never had a reliability issue with it. Only a glock fanboy uses that excuse. This is coming from someone who daily carries a G43x mos. I love my glock, I'm just not a fan boy and I understand glock isn't the only reliable gun available. You should try to learn the same

[@JSimBaller23]

I’ve carried a P320 on duty as a patrol officer, detective, and now vice, having been SRT/SWAT the entire 6 years… same gun, several modifications, thousands of rounds fired, never had a single malfunction.

[@williammoore7482]

Chad was so disappointed with that first magazine, and I don’t blame him. Thank you Chad

[@catdaddy3302]

I hope he didn’t have to buy it! 🙀🙀

[@sukaenacornelius9285]

I realized for the 15 round mags for the 365, the don’t jam like the 12 or 10. So I carry with a custom 12 from armory craft, gold base plate, since I got the gold barrel that has a wider slip angle at the bore entrance also. Zero jams at 10k rounds. And I only cleaned once.

[@Truth-Seeker75]

Former LEO - carried the .40 and 9mm in the Sig - and had multiple jams. Switched to Glock and never, ever, had a problem.

[@sukaenacornelius9285]

Ive had my 365. Got the version after they fixed the issues. Have shot alot through it, never cleaned. Maybe 10k rounds. Not even cleaned until recent. My husband and I chose not to clean as self experiment. No issues. I use laser zeroed 25yds. Which my husband disected the brand made for the 365 and put a motion chip in it so I don’t even need to press the button. I make my dresses conceal carry friendly also. Not public yet but hope so eventually.

[@j.j.7860]

I’ve got a 320 axg, approx 1000 rounds, never jammed, same with my xmacro

[@ASTRAGEM]

go to hell with your overrated glock Sig any day

[@DC-bk6ep]

@@sukaenacornelius9285so a laser will just be constantly on while you are “concealing” and I doubt you have fired 10k rounds. Cause if you have then you would not need a laser to shoot. Your husband failed you if he suggests you use a laser instead of the sights.

[@sukaenacornelius9285]

@@DC-bk6ep My husband gave it to me. One of the first 365s without safety with some second edition extractor. Never said I went ten thousand rounds. Regardless. There are wife variety of situations where a laser is better regardless. Fyi, my husband was military and said he used the the bright beam of light to aim without ever using sights or he used the IR sights through he night goggles. And I’ve been with him and his friends shooting fast with them than with sights. But certain situations especially slow movers like me, laser will always be better. Even if I had done 10k rounds. I mentioned 10k because the gun is very durable, and my husband had got it used. Technically it has been cleaned because he put a pretty barrel and slide on it, stippled it with grippy handle and put a van halen guitar stipe design except with girly colors with a paint called cerakoted. I could do a million rounds. I’m never gonna be as good as you, my husband or his friends. They could shoot blind in the dark better than I could with sights. But depending on situations in my routine stores, locations I frequent and hot spots, I know what to do. Which is sad. Which is also why I’m moving out of US.

[@GrammarHero]

Considering you can get almost 3 Glocks for the price of one SIG and Glock is more reliable, I'll stick with Glock. Sights and triggers are cheap; reliability could cost you your life.

[@superrad1659]

(majority of) Sigs aint 3x the price of a Glock lol. Glocks are pretty basic offerings as far as features go, a no frills model from Sig is literally the same price most the time... 43x/p365, 17 or 19/p320... Trying to compare any Glock to say a 226 Legion isn't remotely apples to apples.

[@TheDrew718]

For EDC/CCW I like Glock, but the Sig 226 is a cut above.

[@superrad1659]

@@TheDrew718 Never owned a Glock, nothing against them, just kinda boring imo. I wouldn't mind having a 19X. People like to crap on Sig but honestly I've never had a negative experience, never experienced a jam, QC issue, or anything else. Rifle or pistol. Idk if I'd AIWB a chambered 320 lol but thats a topic in itself.

[@Cant_Stop-Wont-Stop0329]

​@@superrad1659Reliability is first for me looks are last.

[@h.r.puffnstuff8705]

@@superrad1659 I feel ya. Took me 20+ years to warm up to Glocks. They were the rage with many Leo. I thought “To dang light for anything hotter than 9mm”. I finally warmed up after watching them digest thousands of rounds after being beat on the job. Throw in the average Joe can usually repair an internal failure without a machine shop or an experienced GS assist. They’ve proven themselves in crucible of first responder/military use. There’s no arguing their track record.

[@pluggerdavidson6418]

Let me tell you something, pretty don't bake biscuits son.

[@RolandtheThompsonGunner]

I know some pretty things that bake some mighty fine biscuits.

[@sukaenacornelius9285]

I can tell he was a seal with that water bottle in the back of his truck when he talked about the holster. Every seal has that nalgeen bottle lol

[@mzondi1970]

I don't know my wife's pretty and she makes good biscuits

[@williammoore7482]

I purchased my Wilson Combat P320 carry last year, and I love it. I’ve run it hard never a malfunction. Just a pleasure to shoot and carry. I still have my 1911 colt combat commander from Wilson from 40 years ago. Chad, I enjoy your shows and watch them often, I’ve learned quite a bit from you and I appreciate it.

[@kodiak7964]

Nice grenade

[@danwuollet5649]

Either one would work for me I like the larger trigger well and the trigger on the SIG Thank you for the demo.

[@mackmane6529]

@@kodiak7964😂

[@theprepperrevelator]

If you have a 40 year old Colt built by Bill himself that is worth some dollars if you took decent care of it.

[@lincolnclawson9259]

I have shot sig my entire adult life. I have been around hundreds of people shooting sig. Tens of thousands of rounds. I have never saw one give the trouble you seem to be having. I have to say though I am a glock fan. All respect to you. Keep the videos coming.

[@stahpit1971]

Reliability over beauty every time all day

[@Iberian247]

Yup, same goes for cars and women. ✌️

[@nickpool3943]

@@Iberian247 man that speaks volumes to our awful society.

[@Weaponsreviewer99]

​@@Iberian247there you and I disagree. Vehicles we agree. But about women aspect you and I disagree

[@Weaponsreviewer99]

Specifically on weapons I agree. Now if you mean women there you and I disagree. Because the saying is " beauty is in the eyes of the beholder." Meaning is according to perspective. But as far as weapons I agree beauty in weapons isn't as important.

[@Cortezuma]

Looking cool is half the battle.

[@EmoryullivanS-hv7vv]

Former 17 year SWAT Operator when converted from the wheel gun to the Semi we chose the Sig P226 9mm. We then transition to the P220 45 acoustic and NEVER had jams. In fact in the 80’s majority of Law Enforcement Agencies made fun on the Glock at the end of my SWAT days we converted to the Glock. Due to the grip angle I AKWAYS shot the Sig bette. I used to be a Non Glock fan boy but I can’t deny the reliability, durability of a Glock. I now like both brands

[@rollofire22]

I have both the Glock and the Sig and have ZERO issues with both! I just really dont like the angle of the grip on my Glocks , but the Sig Sauer just has the right angle to shoot and I don’t have to over correct my grip.

[@bobbyraejohnson]

I have a 19 and just not a fan of the angle either.

[@peady64]

I have both myself. I find myself carrying my 320's more than my Glocks. Definitely enjoy the grip angle better than the Glocks. I love my Glocks as well, but my Sigs are my EDC now.

[@devildog1073]

Spot on!

[@justonnsmith1987]

Thank you. I carried a p226 in the navy and carry p365xl every day and havnt had an issue. I have a sp2022 in .40 and never had a malfunction either. For me if you go into something with negativity from jump then you stick with negativity

[@jensenmcelravy2747]

I have a glock 45 and a sig 365 x macro. No failures from either. I love them both. No fan boy moments. Both reliable platforms I trust my life to.

[@SoneDvvn]

Wish I could say the same with my x macro tacops. I've had 2 failures to eject with roughly 200-300 rounds in. Those 17 round mags are tight as a whistle and I'm not sure what's causing it to hang up. Fiocci 115 grain fmj I'll need to run some more rounds through it to consider it as an edc gun. Do you have any issues when shooting with fully loaded 17 round mags?

[@jameswick8358]

No worries on the promotion part of the video we know its apart of the game

[@GusTx281]

Supported the show and bought a VNSH holster. I come across their ads regularly. Now supporting both companies

[@GSPDUCKDOG]

My wife and I have had P229s for over 15 years and I don’t remember ever having a malfunction in mine and she was having some problems until we realized she was limp-wristing. Once she improved her grip, there was never an issue. I also have a P238 and the only malfunction has been with steel case ammo so I just don’t use that ammo anymore. My wife has a P365 380 and has not had a malfunction. The camera doesn’t lie though and other people seem to have problems with Sig so I don’t know if I would risk getting another one.

[@mnandeazy34]

Yea, agreed... ive never had any problems with my mk25 or my 229.... but maybe recent quality control jus hasnt been doin their job

[@toddmessina3105]

Right? My P220 in 45ACP is 30 years old with maybe 9000 rounds through it. 1 stove pipe with reman ammo.

[@Ray-vq2jc]

The Sig 220 series guns are not the striker fire guns , the Sig all steel guns are iconic and some of the best ever made like the 229s but there on the pricey side.

[@johnnyomerta]

My 365 has thousands through it and I’ve carried for years. Runs great.

[@J_Braz_]

I bought a Springfield Garrison that had feeding issues at first. Really made me not have faith in it. But after shooting about 50 rounds through it hasn't jammed since. My G19 and 21 were bought used, both gen3's, have never malfunctioned after thousands of rounds. Just got a FN Reflex yesterday and shot it this morning for the first time and filled both mags up and emptied both. It ran flawlessly. Didn't have any feeding issues, even when loading the first round, didn't shoot low and left like many people say theirs does. Also shot 2 mags through the Garrison .45 and it ran flawlessly too. So for it's been a good morning.

[@FriedBalonyPony]

I want to hate the glock but the reliability is what keeps me coming back

[@bobbyraejohnson]

Buy a revolver

[@FirstLast-ff7qx]

Everything can fail.

[@stevenblake6939]

​@@FirstLast-ff7qxexcept a glock!

[@FirstLast-ff7qx]

@@stevenblake6939 lol. I wish it was true but its not. My buddys gen5 19 failed twice within 200rds last week. As a machine operator, everything will fail atleast once at some point.

[@Texas2Step79]

​@@bobbyraejohnsonlol 😆 it's not too late to remove this

[@brianharris706]

Love the shooting videos brother. 3 of 7 is one of my favorite channels. Always learning something. Peace be with yall.

[@Yetified_Mayhem]

I trust my G20, KKM barrel, 200g HC,chest rig, here in the Grizz country of Idaho

[@tonymarinelli7304]

What Hard Cast rounds do you use? Thanks ahead of time

[@easttexascountryboy4872]

True honesty here, the S&B ammo 180gr at 1165fps is the only ammo I've ever had an issue with in my XTen and XTen Comp. Magtech, Sig Elite, Blazer, Aguila... great! Winchester and Remington 10mm is just .40 cal in disguise. S&B still under power for 10mm but cheap to shoot for sure! Great video as usual brother, keep it up! I'm an "all gun" fan so unbiased honesty. That being said, don't want any malfunctions!!

[@KHugg1776]

I'm a Glock Guy... I wont step into the woods without my G-20

[@Hollow_762]

I edc a G20

[@eddieengland9886]

I love my G20!! You can tell you're shooting something with power but still quite manageable.

[@KHugg1776]

@@Hollow_762 Nah I carry Glock 19 EDC, Except at BBQ's then I carry my Rock Island RO Compact .45

[@gunnerkelley7592]

I own both Sig 10mm and I've had no malfunctions. Thanks for the review.

[@dane5896]

Awesome gift👍 I carried a Sig P229 on duty for eighteen years. I never had any issues.

[@paulgarcia8345]

@@dane5896 New SIG’s aren’t the same as older SIG’s. I knew a guy who had a West German SIG P220 from the 80’s. Thing was a beast. No malfunctions or reliability issues.

[@FirstLast-ff7qx]

I got a new production m11a1 which is just a modern 229. Been great so far.

[@aaronroach7181]

Same but the 239 in 40 cal. Israel in the US military.

[@Handletakentryagain]

I like the ads. That means we get good honest content.

[@joebudde3302]

I carried a P220 for 17 years zero malfunctions. Classic Sig P Series take grease, newer P320 series it's oil.

[@MacThreinfhir]

Thanks!

[@christopherhendren117]

Yeah, red dots change everything, I noticed that too, my ability to use irons has definitely declined since using red dots. P.S. I absolutely prefer Glock to SIG.

[@JamieFaux-qi6ip]

What’s a good red dot . I have been thinking the holosun acss cuz I’m new to them or the new Trijicon

[@christopherhendren117]

@@JamieFaux-qi6ip The SRO is my favorite, but I also have an RMR and RMR HD. I just stick with Trijicon. I don't like Holosun personally.

[@yourfavoritewelder3162]

@@JamieFaux-qi6iptrijicon rmr or SRO

[@JamieFaux-qi6ip]

@@yourfavoritewelder3162 is the rmr hd or rcr good to go ?

[@yourfavoritewelder3162]

@@JamieFaux-qi6ip I wouldn’t hesitate to buy either one of those. I’ve had good luck with all of their products.

[@illusivemind6655]

Thanks!

[@JamesGroves-vr2xw]

Chad, stick with the G40 & G20. ❤ the channel. God bless America 🙏🏿🇺🇸

[@lutherpayne9957]

I have to go with the Sig just because it fits my hand better. Cheers!

[@LS1007]

Glock because they just work!

[@StevenRogers-hw9dj]

So does Hi-Point.

[@StevenRogers-hw9dj]

@@PedroKing99 Is this your first week of learning about firearms, little guy? Hi-Point is disliked for several reasons, but reliability isn't one of them.

[@Swamp_Shenanigans]

@@StevenRogers-hw9djHi-Points are for broke people

[@bobreid1363]

I bought a Glock gen 5 a few months ago, I haven’t shot it yet, I considered an Sig, but this video makes me glad I went with the Glock. Thanks for you for the easy to understand content, I’m from Georgia myself.

[@coreygendron3766]

I've had sigs glocks, m&ps, etc, but the most reliable pistol I've had in my experience was my CZ p01

[@Ray-vq2jc]

I own Smith and Wesson's, Glocks, Ruger's in semi auto and a Berretta 25acp. But my Revolvers are the most reliable of all.

[@boksteve]

Three of my pistols are Sigs. Two have been sent back to Sig because of reliability issues (on little things), which were fixed. Still, no excuse for those jams. Bought my first CZ as a result.

[@DT-ww4gv]

I like to see new products! Keep it up.

[@randysnyder3099]

Advertising is a small price to pay for a great channel, thanks brother

[@GoingBrokeHockey]

Sig 220 in 10mm! They used to have a really nice Hunter Edition 220 in 10mm. Also another option is a 1911 in 10mm.

[@maverick744]

I would try the Sig with different mags. You uncovered a great point on the mag spring rate.

[@downtown4028]

Primary... prayer and hope you are healing up Chadd.... eternal blessings GA soldier.

[@jimd1968]

The Sig P220 in 10mm is rock solid. It only holds 8 rounds but its rock solid. I also a fan of the Glock 20. If you ever get a chance to shoot a P220 in 10mm you will see. Great video and happy subscriber. Keep the 10mm fun coming.

[@--SHEPHERD-OF-MOTHER-EARTH--]

Glock all day... I can't believe people are still buying a gun from a company who gives no reason and lies about there guns going off in people's holsters and make excuses for it... Fuck em

[@mblake0420]

Bc it's not lmao

[@superkool7]

I have had 3 320s over many years. Thousands of rounds through them. NEVER ONCE did I have any weird shit happen. Nothing but awesomeness. Most people that shit on Sig can’t afford one ;) that’s ok bro. Save up and maybe Someday!

[@jbird73]

Well, the lawsuits don't lie. One was won another officer was shot by his holstered sig last week. I'm not saying they are all bad, but to deny that just under 100 ppl has been injured by sigs is denial.

[@Jfuli]

Why do you sound salty? 😅 just wondering.

[@Jfuli]

Salter than a peanut.

[@KellyOJ75]

just found your channel, thanks for your service from one vet to another ( I was nothing special but played in the sandbox just the same lol)

[@hyunpark1337]

Chad after I received my sig and cleaned the factory lube, clean the striker channel dry… I’ve never had a malfunction… ever… 200 rounds my first day… 1k in 3 weeks… much more now

[@TheFunwithfords]

Have a 1st generation P320 and never have a problem. Even with reloads and cleaning every other shoot. Always fires.

[@delta.alpha.novmbr8802]

Hey anyone who complains about ads should have to test a vest from temu. Thanks for the FREE content brother, god bless

[@richardbrown9138]

Great Shooting! The Glock hand guns are always 100% dependable! Thank you and God bless!

[@paulgarcia8345]

Glock is the industry standard for a reason

[@Mr._Infamous]

🤦‍♂️😂🤣🤣🤣🤣

[@robert8342-w7x]

Glock should make a metal receiver option.

[@bobbyraejohnson]

In the past, yes

[@FritoPendejo684]

@paulgarcia8345 Yup. Marketing The SA XDME 10 is in all ways a better pistol. If you don't like the grip safety, pin it.

[@breeze7863]

​@bobbyraejohnson so what is now? It's funny every video you see of a glock clone is it's the new 'glock killer' . If everyone is trying to beat glock, how are they not the standard? And I'm no way a glock fan. I prefer walther pdp, echelon, over glock. But glock is the standard for reliability and dependability.

[@rikkib7820]

Man, I really like your videos! I just retired from the VA! I live in Illinois and we cant have longguns or any type of rifles. I currently have a SA hellcat 9 mm, a SA 1911 and a Mossberg 590. 12 GA. Wished I could get something else. Keep up the work! I Enjoy them all!

[@Jj-se5df]

I had Sigs. Now I shoot only Glocks. The Sig in this video was georgeous. Didn't work though. There you go.

[@wcstrawberryfields8011]

You never know with brand new mags.

[@rangerrecon]

I've never had a Glock fail to feed on the first couple of mags, but I've never had a Sig do it either. Either way, I don't necessarily consider it an issue. If the problem were to persist, yes, that would be a BIG problem.

[@ASTRAGEM]

what an idiot

[@ShaneLinkMarshall]

This is one of the few YT channels I fully support.

[@ShaneLinkMarshall]

Im thinking about buying that glock now.. loved the video guys, thanks for the review

[@phoenixthephlame3558]

All of their sponsors are people I support guys. At least they aren’t running stinking blue chew adds.

[@dweberlvnworth]

I have an Sig P 220 Legion in 10 mm, and I have never had a malfunction. It is heavier than polymer guns, but this helps cut down on the recoil. It has been bullet proof. I am still reluctant to buy an Sig P320 X in 10 mm due to some of the problems I saw here today, and in other reviews. I noticed that Sig is way ahead of most of gun companies in terms of new products, but often at the expense of reliability. Egro the initial issues with the P 365. Sig needs to stop using its customers as research and development guinea pigs. Thanks for the review. I wish HK would produce a 10 mm, but they are still working on an answer to the Sig P 365 XL series.

[@timothyfreed6959]

I saw a guy at the range last year with a sig 10mm. It also jammed twice. My Glock 20 gen 4 has never jammed even with my reloads. I’ve never needed a break in for any of my Glocks.

[@DecentralizeMarkets]

Appreciate the content dude. Thanks for showing the reliability issues with the Sig. I have noticed on a review by MrGunsngear for the S&W performance center also 10mm, that it just would not take PMC 200gr. Seeing that your sig ran fine, as far as i can tell, with the other ammo it might just be certain guns don't like certain ammo. That being said Sig needs to do better...magazine tolerances and difficulty racking the slide.

[@walterneville2625]

I was part of the Pilot Program, in 1993, for NYPD, to transition from 38 cal revolvers . Four guns were chosen for the Program. Sig Sauer, Glock, Smith and Wesson, and Ruger... Only Ruger did not make the final Cut..Less than a thousand officers were chosen from a Department of almost 38,000 at the time.. I have carried either Glock and Sig Sauer for roughly 30 years.. Both guns have their good points...For the most part, it really comes down to a matter of personal choice.. Except one category, Accuracy.. The Sig Sauer will shoot circles around the Glock.. This is not a personal opinion, rather an observation.. Thousands of rounds fired on the Range, the Sig shooters consistently had tighter groups with less Flyer type target hits.. If you look down the line of Shooters, the tighter groups were usually Sigs. This observation was made over many years of Service, and Range Dates... Both great guns. Sig Sauer hands down more accurate

[@357_SWAGNUM_MAGA_X]

I bet the rugers were too heavy

[@walterneville2625]

@@357_SWAGNUM_MAGA_X The Ruger P89 was in the Program.. I was first issued a Ruger, the recoil spring broke on two different training evolutions.. Both times the gun became inoperable, unable to open the slide.. The heavy gun of the Trials, was the Smith and Wesson. It was all steel, and very heavy...

[@tonymarinelli7304]

Completely agree

[@Perkeletricksterservantofrher]

Sig is trash

[@HalfCrazy520]

Funny you should say that about the Sig being accurate. I don't think the Sig's mechanical accuracy is better, but between the ergos, the trigger and the sight picture, everyone seems to shoot the Sig well right off the bat. To me, the trigger reach is a big thing too. On guns like Glock, Walther, or Canik, the trigger has a long take up and it breaks all the way back against the grip frame. This puts your finger at an awkward angle and it's harder to break the trigger without moving the sights. On the sig, take up is short and after the trigger breaks you can still get the tip of your pinky finger behind the trigger. The same reason that companies like Apex offer 'flat/forward' trigger kits for guns like the M&P. My 320 is a compact in .45 ACP and I carry it most of the time, simply because I shoot it so well. Oh, and mine has never malfunctioned in several thousand rounds fired of all sorts of ammunition.

[@blakewhitely392]

My edc is P365X Macro and I have a collection of SIGs 9mms that is. I love Glocks as well. That being said, I find the sigs shoot better for me. That doesn't change opinions of the rival companies. Love the video man!

[@chiefbiglew]

been looking at the vash holster here lateley. glad you did a revue on it . i wear shorts in the summer some have draw strings outhers i have a strech belt. whitch wont hold a holster for shit. it looks like the problem solver.hope your doin better and good shooting.

[@ComputerXLR8]

Chadd, thank you for your videos, notable advice, and concise information about life, firearms, goals, and related topics that remind us that 'the only easy day was yesterday' and that we can all become better through the humble and relentless pursuit of self-improvement. I always say Ignorance is Expensive and I appreciate your instructive, educational, and entertaining videos that teach us how to move from being paranoid to being prepared.

[@Mako-sz4qr]

See ! There is always issues with the Sigs. I want to get one but dang. Never one issue with my Glocks and a Smith… Not 1 even out the dang box in many years and I’m an old fart. Folks are having issue with sigs new Fuse 9mm also. Bring the price way way down ❤️🇺🇸🤘🏻

[@mblake0420]

Had more issues from glock than sig, my experience

[@Mr._Infamous]

I guess I'm just partial to the M&P. Glocks are reliable, but the triggers are f****** junk. Plus, with the jurie we have these days, it's a risk if you carry a modified weapon. If I have to change the trigger out on it, then I don't want it as my carry gun. I don't want to give these slimy lawyers anymore excuses to use than they already have.

[@bobbyraejohnson]

@@mblake0420isn’t that funny because I also have had no issue with my p320.

[@justsayin7937]

Sig tests their products on their consumers. Always wait a couple of years before buying a new introduction from sig.

[@bobyjones3905]

I have both I just got the Glock 40 2 weeks ago. But I’ve never had a problem with my Sig X10

[@blackcreekarmory3470]

Glock. All day, every day. The trigger can be improved, the sights can be improved, the grip texture can be improved. And with all of these improvements added to the Glock and you will have money left over compared to the price of the Sig. Sig, no thank you.😎

[@andrewfrazier7974]

@@blackcreekarmory3470 🤦‍♂️sigs and glocks both sukk. Maybe ur looking for a Hipoint? If not, HK and CZ make some nicer pistols.

[@jsinclairinthe919]

Let me save you 27:47. If your life depends on it, and you can only choose one, choose Glock.

[@chipchaffee2416]

If you want to rock ! Buy a Glock . I don’t care what anyone says . I’ve owned them all . Fired thousands of rounds In Uspa and IPDA . Got over 10 thousand rounds threw my Glock 34 . I realize that there not the sexiest gun . But they work . Nuff said 😂

[@ronthompson2366]

Sweet gift... Have the Tech guy go to your favorite firearms store. Purchase or borrow the Smith and Wesson 10mm 2.0 M&P. The Performance center version runs approximately 750, the standard 4.5 in barrel version approximately 650 bucks. That's pocket change for you (so spring for the Performance Center version). Give it a run and a review. If you want something that's different and fun. Plus, a GREAT hunting handgun. Take a .460 revolver Long Barrel out to your range. No, it's not CCW. It's a hunting firearm. Something different to try and review. [Make sure you get the long barrel hunting version]. Just a note of interest, "some " semi auto pistols. Don't like "hollow point" rounds and will have feed problems. Because of the angle of the "feed ramp" on the barrel. They prefer "ball" ammo. Take it to a proper Gunsmith, we can do a minor bit of stone work and cure it. If the tolerances are tight it can cause this as well. Where as a "loose" tolerance hand gun , not so tight tolerances. Will not be or not be as easily affected by the "feed ramp angle " , and feed ball or hollow point. If you ever have a handgun built for you. Your Gunsmith, should ask you, is this for carry or competition ? Or a little bit of both ? A competition firearm is built to tight tolerances and zero play, for accuracy. You will need to "shoot it in " . Or you will have jam issues and stove pipe issues. But after about 100 rounds, proper break in a proper cleaning and lubrication...not overly lubed. It will be ready. Keep in mind a competition firearm is not only built tight to specs. But sometimes just a little tighter. Because it's expected to be shot a lot. So you want to prolong the time between rebuilds as a competition shooter. A "carry" firearm, is usually a little loose or sloppy. To allow it to shoot any ammo under all conditions, environments, etc. . Without any malfunctioning. Accuracy may suffer slightly. But not terribly, unless it is extremely loose fitting... poor quality. And of course if you want it for both competition and carry. Your Gunsmith will build it some where in the middle. Not to tight, not to loose. One last note... if the firearm has been painted. Cerakote... then assembled. It to cause brief feed issues... jamming. Because of the paint, you will see the wear marks (slide to frame fit). That can easily be cleaned up and usually will 'shoot in" after a little use.

[@commentingisdangerous7530]

i use the shield plus perfomance as my edc, i have never found a subcompact that even comes close to how well that gun operates. especially if you are a big guy with big hands it is more comfortable than any other i have tried.

[@MrTimdcarroll]

Thanks for the video ... I gave my G40 to my son (due to an arthritic index finger / trigger well issue) and I'm looking for a 10mm replacement and because of you, I found it. I'm normally a Sig guy (all my 9mm are Sigs) until I jumped to 10mm and bought all Glocks which are now all my sons.

[@howler5000]

If there was a grizzly running at you, honesty say which one you would rather have. There’s your answer

[@ronthompson2366]

If it were me.. a 500 Smith and Wesson revolver with a short barrel. No jams, no failure to seat magazine issues, round always in chamber and ready. No feed issues... point and shoot ! 500 Smith and Wesson son.. getcha one !

[@ward185]

That’s what I was thinking.

[@Swamp_Shenanigans]

Benelli M4 with slugs lol. Glock if it’s a pistol.

[@johnnyomerta]

A 454 revolver! 😂

[@jasonbraun]

Love my Sig P226 10mm. Never jammed.

[@David-lq4tq]

P226 LE .40, many many rounds with zero malfunctions, I still carry it as private security.

[@tonytorres3911]

The 10 mil for sure

[@AndWeKnowMedia]

Great content as always Chadd! I think those first two malfunctions were mag issues. Had that happen before even with pmags in a Glock and even in a 1911. You probably know but they just need to be cycled a couple times. Shot a P320 right out of the box once and had no issues whatsoever. Also could be ammo. S&B is generally pretty decent ammo for the price, at least for 9mm anyway. Can’t say much for 10mm. I’m a Glock fan but i’m getting more into the Sigs lately as they are just good guns!

[@IdahoIsaiah67]

Dont use grease on the slides, its better with a drop of 3in1 oil on each side or even to run it dry than to use grease. Grease causes friction and it will heat up and get tacky. Blessings in Jesus

[@tbsoper]

How exactly does a lubricant grease cause friction? Actual question. Some very knowledgeable firearms people use Clenzoil gun grease on the slide rails and Johnny Glocks has a couple greases he uses. I’ve also used them for the past year and have noticed improvement instead of any friction or lag, whatever you want to call it.

[@1968tlr]

Thanks for the video. I’m looking for a 10 mm. I’m gonna cross that Sig off my list.

[@BulldawgDad]

Glock over Sig Any Caliber Any Day

[@ASTRAGEM]

mental hahah

[@eddieengland9886]

Another great review and video!! 👏🏻👏🏻

[@jostafro4967]

who tf is getting mad about the sponsors?

[@Macdaddy8124U]

@@jostafro4967 sick and tired of in video sponsors, I just move on to someone else's videos

[@Texx_OG]

@@Macdaddy8124U You clearly didn’t watch the part where he explains every gun video gets demonetized….. So you want him to spend time and money on videos for free?

[@Macdaddy8124U]

@@Texx_OG yea I do, hence the word "YOU TUBE" not SponsorTube. And your right, I quit watching the video right as the sponsor part cones on

[@LiveFreeOrDie76]

weak men. That's who.

[@jostafro4967]

@@Macdaddy8124U you can literally skip the sponsor.

[@music4dages]

I own a SSP226MK25 9MM and a SS 1911. Both are beautiful guns and shoot exceptionally well. I added the 1911 for its greater stopping power over the 9MM. I highly recommend the Sig, but be aware that it’s a bit pricey.

[@tjcurran4912]

Glock

[@ASTRAGEM]

glock only for idiots who can't shoot straight

[@musicachefionado8086]

Never had any issues with any of my Sigs or Glocks. Only with ammo, which were a problem in both. Love my guns. All of them.

[@waynegunter7509]

Remember his ammo didn't even make it to the target at 80 yards😂

[@Logan54x]

I ordered a new extractor for the Sig, haven't shot it yet. But I heard a few people saying there were no more failures to eject after that. The new extractor, has a sharper curved edge and grabs the bullet more. Ordered the little assembly with the spring from Sigsauer for about 60 bucks.

[@strongsyde]

When it comes to the X-Ten, the ammo needs to be ' to-spec ' so they don't hang up in the magazine.

[@1594simonsays]

Should be able to fire any 10mm ammo if not most

[@strongsyde]

@@1594simonsays True, but mag issues just plague that gun.

[@commentingisdangerous7530]

what is it they always say in the AK community? if it can't shoot steel, then it doesn't deserve brass... i guess if it is a precision pistol you need the ammo to be just right, but is the sig advertised as that?

[@wcstrawberryfields8011]

​@@commentingisdangerous7530 Does it have anything to do with the tighter tolerance of a supported chamber?

[@awakenotwoke4830]

​@@wcstrawberryfields8011it's the mag. You can read complaints for days about the follower getting stuck.

[@josephallen8691]

Chadd, First of all, I like your ads because they are good information that a lot of people can use. Second, I don't care what anybody has to say about Glock I love them also I am old school and would rather have iron sights. Thank You for all your content.

[@alstewartsr31]

Home on the range

[@brianoconnell2009]

Can you please cover riffles like .300 win mag and others with various scopes and how you set file and dial them in ? Also different shot guns . Pump action vs like a benelli semi auto . Different chokes etc . Thank you

[@ThisHandleIsntAvailableTryANew]

You read my mind

[@DC-cf1hm]

The best Sigs are and have always been the P220, P226, and P229!! I'm so glad that my agency stuck with the best defensive pistol, a Glock!

[@thevet7420]

CAUSE THEIR CHEAPER!

[@chadf1034]

I own a glock because everyone owns a glock. I own a sig because I really like sig firearms. I respect what a glock is, just never really liked the ugly buggers

[@WildernessForever]

I don't care how ugly it might be as long it's a reliable hard hitting friend

[@callaseter4811]

Just makes me not mind using it in extreme environments and worrying about scratching (etc) it up. I still have confidence it’ll go bang when needed . 🙏💕

[@jasonwhite251]

Thank you for this unedited review. My buddies Sig did the same thing right out of the box. You should not have to put 1500 rounds through it to break it in.😂

[@MrWest3]

Safety and reliability Trump everything, that's why sig is a no-go for me. Also, sig doesn't take accountability, they make excuses, which is a shame because they are far more innovative and make better looking weapons.

[@Mortem_Tyrannis_24]

KZbin sucks. No problem with the advertising! Keep the great gun vids coming!👍🏻👍🏻👏🏻👏🏻👏🏻

[@johnmarkkerr]

Glock. Less recoil. Shoots dirty. Fewer jams.

[@fredseymour1224]

OK children gather round.......... Number 1. SIG striker fires are junk. 2. sellier + bellot brass is soft and the cartridges do not want to slide on top of each other going into battery causing jams. 3. I'm a proffesional, as such we don't load mags to capicity +1. for the reasons shown with the SIG. For example, 14 round mag +1 when fired the slide must recoil pushing down on a full mag as it rides over top and pushing back into battery ( COULD JAM, NOT RELIABLE, WHICH MEANS YOU ARE DEAD IN A GUNFIGHT). Don't bring a jammed pistol to a knife fight.

[@adamzalewski6135]

The 10 millimeter is the true "Gods Caliber"

[@Ray-vq2jc]

I think I will stick with my 357 magnum.

[@JohnSmith-nh9vr]

@@Ray-vq2jc I will with my 357 sig

[@Jbainbridge5]

@@Ray-vq2jcI'd rather have 15 in the mag. But that's still a classy choice.

[@barrymccockiner6641]

It's actually "God's centimeter."

[@Ray-vq2jc]

@@Jbainbridge5It only takes 1 shot with the 357 mag. and that's according to recent FBI stats that stated a 90 to 92 % 1shot stops. This static has been this way for decades in which it has the best record for stopping power on the streets.

[@BenJones-m5h]

Love my G40. But choosing between the two would be situational. My G29 is a lot to hold on to in that smaller frame. Kept breaking my grip until i put some talon grip tape on it. I have wanted a Sig X10 for a while. 10MM is real deal. Thanks Chad, great video.

[@stefanw.792]

Glock, not the best at one thing, but overall the best.

[@ASTRAGEM]

overall to be a junk

[@rangerrecon]

I have a P320 and M17 from Sig with a ton of rouncds through them and found both to be highly reliable, but both are 9mm. I do think that getting 15 rounds in that smaller magazine could be problematic with these large rounds (although the fact that the feed failures happened on nearly the last round was interesting). I still don't carry my P320 as I still don't trust the trigger (even after the optional trigger upgrade from Sig). My EDC is still my H&K VP9SK (but you won't be fitting any 10mm in that). I do find that I like the grip angle and feel on guns like the H&K VP9SK, Sig P229, Sig P320, S&W 1911, etc. better than the Glock, but there is no denying a glocks reliability to go pew everytime you pull the trigger. Is it wrong for me to still prefer the Sig over the Glock? I don't know, but in woods, the pistol is my backup to my Marlin 1895 SBL brush gun.

[@davekurz6036]

I'm a RUGER GUY, but I've come to trust GLOCK for the ' it just works' thought. When they were 1st available here in the USA a friend was on the FDLE and had a G17 and didn't like the feel of it. Fast forward 30 years, all in on GLOCK!! IMHO

[@GATEKEEPERradio347]

I’ve had a S&W SD9VE It’s been in the night stand most of the time, where it belongs. Never had any issue with it but I’ve never been happy with how it shoots. I like how the Walther shoots. Smooth… and I hit what I’m aiming for. Thanks for the recommendation. I’m gonna get me one for EDC.

[@Butch-vo1jn]

Haters gonna hate hate, hate GLOCK for the win Said no one

[@Butch-vo1jn]

I’m really an old man Glock fanboy all my life. Somebody holler back.

[@ASTRAGEM]

win to fail

[@chrisangel9899]

Realest talk about those sponsor haters. Fuck em. We appreciate all you do and all you’ve done. Mighty fine content

[@terrencedaniels7534]

Everything is ads these days. Video liked . Keep doing what your doing.

[@josephgeiger3285]

I have the P320 X10 comp and it makes a massive difference. When new it was having FTF problems for the first few mags but once I cleaned and oiled back up ran like a champ with 0 issues