3Racing Cero Sport - Bag 3 Bulkhead & Drivetrain Installation

In this video, I'll show you how to install the bulkheads and drivetrain onto the 3Racing Sakura Cero Sport from Bag 2. #3racing #rccar #cerosport #ceroultra
This is the newest 3Racing touring car chassis. It is the Sport version of the acclaimed Sakura Cero Ultra. The Sakura Cero Sport brings an affordable racing chassis to beginner and seasoned racers alike.
This is not a sponsored video. I bought this 3Racing Cero Sport kit with my own money. If you'd like to support my channel, use the affiliate links below to make your purchases.
3Racing Cero Sport Kit
www.tqrcracing...
BUYSK Mini Bench Vice Clamp
amzn.to/43ADKku
_________________________________________________________________________
3Racing Cero Sport Features
1. The first sport touring car platform to utilize pivot ball suspension arms.
2. All suspension geometry carried forward from the full option pro chassis, Cero Ultra.
3. Active Rear Suspension (ARS) allows infinite adjustment to suit track conditions.
4. Lower suspension arms in composite material, one-piece, lightweight, durable and provide additional flex.
5. Mid-motor mount for optimal balance and consistency.
6. Motor mount provides a wide range of gear ratios, to suit blinky spec racing across all winds.
7. One-piece top deck.
8. Quick change spur gear mount.
9. Molded TPU front bumper.
10. Steering knuckles are common on all 4 corners, reducing the number of spare parts required.
11. One-piece bulkhead covers provide consistency and reduces the chance of chassis tweak.
12. Spring-loaded quick-change battery retainer system.
-----------------------------------------------------------------------------
Find me on Instagram: / rcsrccars
Check out my Facebook Page: / rcs-rc-cars-. .
Follow me on Twitter: / rcsrccars
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RC's RC Cars so I can continue to provide you RC Car content!

[@G3516dude]

Great build series. I have a question, how did the slight wobble/movement in the spur go after hookup with motor? Not sure about the design.

[@slappomatthew]

I’m at this step, and the oring/spur retaining thing bottom out on the M3x6 button head making the whole thing lock up and not spin. I tried stretching the oring around the spur retainer and that doesn’t work either. Both ways it locks up the bearings

[@slappomatthew]

I figured it out. One of the black counter sunk washers got stuck inside the spur locker making it lock up

[@RCsRCCars]

Glad you figured it out. I didn't have the same problem but I did noticed there's quite a lot of play on the spur gear. I torqued the screw hub all the one in but there's still a wobble. I hope the pinion gear will lock it in place.

[@christesterman5004]

So i noticed when locking in the dife and drive that the longer belt looks to rub on the lower right arm, any suggestions?

[@RCsRCCars]

Mine seems to be dead center between the arms. Perhaps double check the manual? The build is pretty subtle in certain places.