3UZ-FE VVT-i Which Accelerator Pedal Should or Can You Use!

[@EdubLex]

Wish I knew of this video when I was building my 3UZ Swapped JZS147 GS300. Now I know for my MK3 Supra, Def gonna use the IS pedal if I can create brackets to line it all up. Thanks tons.

[@WhiteLando]

Glad I saw this, I'm in the middle of 3uz swapping my mk3 supra. I would have just gotten a Sc430 throttle. Saved me a huge headache, I'll be getting a IS350 throttle.

[@PhoenixEngineManagement]

Glad it helped

[@rabeesaleh1457]

Thanks alot for yr great info I have swapped 3uzfe still in progress

[@PhoenixEngineManagement]

Glad it helped

[@rabeesaleh1457]

@@PhoenixEngineManagement running great thank you alot

[@AndyBarker-f6x]

Would the PIN numbers have the same function on the other pedals, eg pin 1 to pin 1 etc Thanks

[@PhoenixEngineManagement]

Hey @user-eww1or3rv4x no the different pedals can have different pinouts. You need to refer to the diagram for the vehicle where the pedal comes from to confirm.

[@العميريزكريا]

Thank u soo much for this great information. Can I install This is250/350 padel in my lexus Ls430 2001 model is it same connection?

[@PhoenixEngineManagement]

Hello you wouldn't need to swap in any pedal if the car is original. This is more for Swaps where fitting say an LS430 Pedal is not viable.

[@SamuelSundays-w5c]

Am having a challenge on my pedal, it rises at all times Please how can I stop that And it consume a lot of fue

[@luismipucela]

what year should the toyota yaris be??? Thanks!!! My is200 pedal is not working good

[@Theogturbo]

Is200 is drive by cable, you need a 2007 and newer is drive by wire throttle pedal

[@MocaSuper]

Could please provide the part number for the last pedal, the one used on hillux's, yaris, etc.?

[@PhoenixEngineManagement]

Hey David nice quick and easy way to get Toyota/Lexus part numbers is to go to www.toyodiy.com they have everything there.

[@MocaSuper]

@@PhoenixEngineManagement Thanks for the quick response!

[@mohsinabbas7706]

Can you please confirm what is the pedal sensor pinout with the oem gs430 pedal sensor

[@PhoenixEngineManagement]

Hello Mohsin there are two versions of the GS430 and there will be two different pedals. The best is to confirm what pedal you have and then Pinouts can be found.

[@mohsinabbas7706]

Hi I have both you are using in the video The one above tp sensor type 6 pin v type The one below inline 6 pin type Can you share both sensors pinout??

[@brostjoe]

@@PhoenixEngineManagement which year IS250/350 pedal

[@PhoenixEngineManagement]

@@brostjoe As far as I can remember any year. They should all the relatively the same. Also it's not just IS250 and IS350 Pedals you will also find the likes of 2005 onwards GS300/430/460 Pedals should also work as well.

[@brostjoe]

@@PhoenixEngineManagement I was looking at the GX460 accelerator assembly. Since this is going in a pick up might be in a better starting position, appears to have same 6 pin connector.

[@mr.cangieter8758]

What pedal would be easiest to fit to an Altezza?

[@PhoenixEngineManagement]

Hey John We haven't found an issue fitting these pedals into an Altezza. Unfortunately from what we have gathered the SC430 pedal is a straight fit but it is one of the pedals that require a stop otherwise it will go out of sync if allowed to travel further then the APS sensor allows

[@blueblazez]

Thanks for the info. Greatly appreciated. Do you know of a pedal that looks like the stock Altezza pedal that may work? I would love to be able to keep the stock look in my interior when I do my swap. Thanks in advance

[@PhoenixEngineManagement]

Hello Blue Blazez unfortunately not personally If you are referring to the fact that some models came with a silver pedal then look for the IS250 or IS350 Sport models as they came with a silver pedal similar to the IS200/Altezza Sport Models

[@blueblazez]

Phoenix Engine Management thanks or your quick reply I will do that.

[@turbogears900]

Which 1 could bolt up into the lexus sc300?

[@PhoenixEngineManagement]

I am not aware myself of which one will "Bolt In" to an SC300 but brackets can easily be made to fit any of the pedals into that vehicle.