4 in 1 Bucket First Use, First Impressions

[@PhatboyHD88]

Tim when i was running Heavy equipment for a living every machine we had there was a 4 in 1 Bucket on it ,, the versatility of that bucket is amazing from tree work to landscaping and being able to use the bucket to say cut a inch or two of a grade using the bucket makes it easy.. just open the bucket some depending on how much you want to remove and tilt it so the front part of the bucket is the cutting edge and drag it backwards .. it works perfect...and also by fully opening the bucket you can move full trees by using the back or dozer portion of the bucket push up against a tree (the stump) lift up a little of the ground and just push it you cant steer anywhere you wanna put it..just keep playing with it you will never go back to a normal bucket.. to pick up boards like you were open bucket all the way ,, then lay it flat in other words so the dozer portion of the blade (the face) is facing the ground And on one side of the pile and the front part of the bucket is on the other side of the pile then close and tilt and close and tilt and close and tilt until bucket is almost in normal position i wouldn’t mis lead you buddy , once you learn how to use it you will laugh at a normal bucket.. i wish i lived closer to you i would come and show you how amazing they really are.. it was the right tool ,, just the wrong technic ..

[@cedrick1963]

My dad and I enjoy your videos, Dad is a retired heavy equipment operator and he said when he first got a 4-in 1 bucket he cussed it all the time BUT with practice you will wonder how you ever did without one. He did suggest that when you were picking up the rubble to open the clam all the way rotate the bucket forward and then back up dragging the rubble toward the bucket and begin to close the grapple. He also suggested a light layer of straw in the trailer before the dirt would have made things slide out better for you. Keep up the videos we really enjoy your efforts

[@demcburney]

Thanks for videos like this, they are extremely valuable for showing real world situations. These attachments aren’t cheap, and to see how they work or fail in different situations and conditions really helps a lot of us that are on tighter budgets make better decisions. So thank you Tim! Of course on the flip side I’ve spent a pile of money on my tractor after watching your videos...and frequently hear my wife yelling “shut up Tim” when she hears a video and sees that twinkle of I want one, in my eye.

[@TractorTimewithTim]

Uhoh!

[@bradb4620]

@@TractorTimewithTim Where did your green trailer come from and how do you dump dirt out of it. Does it raise up

[@TractorTimewithTim]

@@bradb4620 bwisemfg.com tell em I sent you. It is called the Ultimate Dump Trailer. Yes, it dumps hydraulically. We have several other videos showing this trailer. Check em out!

[@glenbreaks5448]

I have a 4in1 Drott on a JD 350B crawler. I find it extremely useful compared to a standard bucket. Main uses of the 4 in 1 feature are 1. Picking up the last bucketful of sand, gravel or soil. No chasing material around and hand shovelling required. It picks up everything remaining in a few seconds. 2. Pulling large volumes of materials backwards, out of corners etc. 3. Cleaning ditches or cutting new ditches from the side. It's very fast and neat for this operation. Leaves a tidy rounded ditch. 4. Picking up logs. 5. Blade work (4 in 1 open). The cutting edge moves in closer to the machine with 4 in 1 open vs bucket cutting. More effective at cutting into hard soil, clay hardpan. Also very quick for pulling old fence posts when building fences, just drive down the fence line yanking them out with 4in1

[@PastorDavidFranklin]

Great demonstration of the utility of the 4 in 1 bucket versus the grapple on previous videos. The trailer is fantastic!

[@cbboggs6459]

I've been using a 4 in 1 bucket for almost 50 years. From working for my father as a kid, then in my own business. I will not own a machine, skid steer or track loader without one. It takes practice to be efficient. Grapples are okay for their intended use.

[@howesithauling3858]

I think those buckets are great if you've never had a grapple before. I feel like it's one of those jack of all trades master of none things. Thanks for the great videos

[@magicman9486]

I have one of these tractors. Never thought i could make some money with it, but Tim is giving me so many good ideas for after i am retired.

[@BennyViola]

Tim, yet again a real-world example of making the best out of a less than ideal situation. You definitely made the best out of the tools you had to work with. I could definitely tell you were frustrated but, no more than anyone of us would be if faced with same challenges. You noted that it was " still too wet" but made the best out of it. To me this is a perfect example why you need a multi tractor solution. Limited space and a larger tractor could have made more of a mess. Great job bud and thanks again for sharing!

[@TractorTimewithTim]

Thanks Benny!

[@pearcefarmtiling8354]

There is a huge learning curve for this bucket, some people never get it. I have 30 years experience with this tool.

[@jeffvanhoose1387]

thank you.....Im going to get a 4way bucket.....and I would have tried to use it....the exact same way you did....scoop and clamp.....now I know that dos not work....and through the comments I learned more about what dos work.....I learn things from trial and error......please keep posting your trial and errors....I learn more from that..than I learn from a mountain of success...and it makes your videos interesting/ entertaining /

[@TomTalley]

Thanks for the demo, Tim. Think broom and dust pan. Technique matters. You are trying to use it like a bucket to scoop up stuff to carry...instead, try to spread the stuff out on the ground and eat it like a dinosaur...I think you can pick up more that way...come down over it instead of trying to make it skid into the bucket...The 4 in one would work much better than a grapple for picking up stacks of loose small material that would fall through the grapple. In addition, you can grade that kind of loose material going backwards by dragging with the open mouth, or by pushing with the relatively flat front...much better than a bucket. you can also distribute loose material like gravel by opening a small gap and driving forward...much like dumping from a chained tailgate on your trailer. It is a handy tool for loose, small stuff. It can also pick up the last of small material that you would shove around with a bucket trying to pick up. When the material gets big enough not to fall through the grapple, then it is the bigger tool to move it. Even then, don't you find that you come in over the top a little bit with the grapple when you want to pick up a pile of stuff rather than trying to push the lower tines under it first?... But, like you say, you can see everything on KZbin...thanks a million for the demo, and your hard work. I wait anxiously for every new one to come out and often review an old one to help me show others what can be done with the machine.

[@Drew-in-NoDak]

Where that bucket really shines is dumping over the side of your trailer where you don't have to curl you can just open the bucket and all the dirt falls out

[@nemesisgt350]

I use to keep a soft rubber mallet in my truck. When I had my dump trailer up and stuff was stuck..two quick smacks to the under side of the trailer always worked.

[@bryanthegamer4798]

Im not sure that would work as good on these style of trailers, these ones have heavy heavy bottoms.

[@nemesisgt350]

Mine had a heavy bottom as well....full one piece construction...it was solid. When fully elevated it doesn't take much to free it up.

[@mikethorntonr1]

Dump body vibrator you just need that and weld a about 18inch to 24 inch c channel to the underside of trailer in about the middle then you bolt the vibrator to that that's how manufacturers tell you to install and keeps bodies spotless

[@Klajnepojken]

Ryan: Absolutley! I used to drive a side tipping woodchip truck, just bashing the floor with a hammer or big shovel helps alot when material gets stuck.

[@grahampahl7100]

I have a 4 in 1 bucket on my BX25D and I absolutely love it. I have excavated alongside my shed and have been levelling with it. Don't worry about using a grapple anymore, the 4 in 1 will do it.

[@rukiddingmeNJ]

Hey there. I have a L2501 and I am on the fence between the 4in1 and separate bucket and grapple. My primary use for the front end use is logs, firewood, and moving brush. Being the 2501 is a smaller machine, my questions is what would you think is a better option? Thanks

[@grahampahl7100]

@@rukiddingmeNJ for logs and brush definitely the grapple. With either option you will have to put in a third function valve so you could have both.

[@anthonyj.barton4032]

This type of bucket was used on Bull Dozers years ago , it was used as a grader like the front of a dozer and you could have a loader that is why they call it a four in one . It was not meant for it to grab things like what you are trying to do . Very nice and hope you had a great Palm Sunday .

[@rescueraver]

2 things Tim. 1 practice and watch 4 in 1 videos. 2 put a mount on the trailer on the right side in front of the tires to carry your forks. Always have your forks. The 4 in 1 can be a life saver. I have run equipment for years a lot of seat time on backhoes. My favorite was a Cat with a 4 in1 and forks remember you can't get around not having certain attachments but for general purpose work you will be hard pressed to beat my favorite. The operator makes the machine not the other way around. You get good by not having the right tool all the time.

[@mrgoodwrench1103]

Nice video Tim. With some creative editing you could have made it look like everything worked out as planned with the job and the bucket but you didn't . I appreciate the honesty expressed in your comments and in your videos. Keep up the great work.

[@TractorTimewithTim]

Glad you noticed. Yes, we try to state it like it is. ...or at least as we see it at the time.

[@kr5289]

years ago I had walked out from a tailgate similar to that, when I come back I found it had broke and fell shut. I'm not one of those you tube safety patrols, but just need to be careful. Good videos. Thanks

[@markpowell4701]

Trailer is excellent and no one was hurt. Thanks, TTWT

[@gdeisig]

My buddies dad has one of these on his tractor, and he likes it for loading the back of the dump trucks. Apparently, he says it's easier to lift over the edge and then open up the clam shell and let everything fall out, rather than dump the bucket. Something about clearance issues he said. I'm not to sure, I've never used one before. A lot of times when someone tries to put two or more tools into one, it's almost always a compromise in some way. Most of the time I find it easier to just have multiple tools, rather than an "all in one" design. Great video you guys.

[@TractorTimewithTim]

I should have mentioned that advantage. Yes we used it to dump the bucket without tipping it forward.

[@jeffslaven]

That is one nice trailer! Definitely the star of the day!

[@Mike-mn9xo]

Just got my 4 in 1 installed on my 1025r for $3500 with 3rd function Deere kit. Love it! Deff have to get use to trying to scoop a full bucket with it it though

[@CaptainKleeman]

dirt perfect has been suggesting your channel to me for some time, and today i stumbled upon this video and i can see why he pointed me your direction. fantastic content and enjoy your attitude. thanks for posting. now i need to catch up on your stuff!

[@TractorTimewithTim]

Welcome Captain! I met Dirt Perfect at the NFMS last week. We had chatted before, but never met personally. He is a great guy! I think we’ll need to do a collab at some point!

[@CaptainKleeman]

Tractor Time with Tim hey he would be great to do a collaboration with for sure! I am wanting to build either a four in one bucket or a grapple, after this video, I do believe a grapple is the direction I’ll go! Thanks again for the content.

[@vernnelson3212]

Tim, When I use my 4 in 1 Bucket on my 1025r to pick things up you have to open bucket all the way and roll bucket all the way forward, then close down and roll back at the same time. This bucket is also Great for Scrapping brush that's not wanted. open bucket all the way and roll forward, then use the clam part to drag back. Also I live in a wooded area and its great for picking up branches, and logs. Keep playing with it you will find it useful in some ways. Love your Videos . Vern

[@andrewlyon6834]

It’s a bucket of all trades master of none

[@davesmith8936]

As you have learned 4-in-1 buckets are NOT grapples. They really are good at being a bucket AND a dozer blade as well as being able to pull large amounts of dirt backwards. In a pinch it can pick up a single limb or log 4-in-one buckets don't have the open gap in the side that allows grabbing bundles of trash. But another thing you are used to with the Artillean grapple (and one of the BIG advantages of the design) is it has two, independent jaws. Grapples with just one big jaw are not nearly as versatile.

[@RoughNeckRage]

I beg to differ. I move brush, logs, rocks, gravel, dirt, and anything heavy with my 4 in 1. Experience helps with operating one. Tim is being very hesitant and easy on that thing. This is a bad example of the the 4 in 1.

[@TractorTimewithTim]

@Josh Are you using a 4 in 1 on a 1025r?

[@RoughNeckRage]

@@TractorTimewithTim no, I feel it's too much for that tractor. I'm running it on a 3046r.

[@TractorTimewithTim]

Ok, wish you would have said that instead of saying I was being hesitant. I just don’t think it is possible to use a 4-in-1 efficiently on a 1 series.

[@RoughNeckRage]

@@TractorTimewithTim yeah I can agree with that. But I agree it definitely has its place. But I will say an actual grapple is way more efficient, like you said in the video.

[@billlary9750]

Those are some good boards that you are throwing out

[@owenfranco9777]

i guess im asking randomly but does any of you know of a method to log back into an instagram account..? I was dumb lost my password. I love any tips you can give me

[@marleygus9738]

@Owen Franco Instablaster =)

[@owenfranco9777]

@Marley Gus I really appreciate your reply. I got to the site thru google and im waiting for the hacking stuff atm. Seems to take a while so I will get back to you later when my account password hopefully is recovered.

[@owenfranco9777]

@Marley Gus it did the trick and I actually got access to my account again. I am so happy:D Thank you so much, you saved my account !

[@marleygus9738]

@Owen Franco Happy to help :D

[@jansorensen]

Plans are great till you get to the real application. You will have days like this.Don't be disappointed. keep up the good work !

[@lcazier619]

4 in one bucket works good for pulling t posts when taking out fencing on the farm.

[@richpicone7788]

I was never a fan of the 4 in one, but like the other guy said, play with it for a bit... Can’t wait to see the big tool rack on a job!!!

[@ChronicBongitis420]

A jack of 4 trades, a master of none.

[@brandenhoward6301]

When you want to pick up big amounts of debris open the bucket. Then curl the bucket forward. Lower it to the ground over the debris Then close the bucket and curl the bucket back towards you at the same time.

[@ethanwilliams2865]

Just to add to B.Howards comment while your doing that drag the pile backwards with the bucket open will help loosen the pile

[@DoA4All]

I don't think that's a 1 & 2 move. It's a 1 or 2 move. The way the hydraulics work you get curl or close. So close, curl, close, curl.. etc. Both don't work at the same time. Definitely not at a combined functional speed. I use mine as much as possible. The 4 in 1 is an amazing tool. I would never be without it. I grin every time I grap and move something that would have taken 3 guys. Nothing but love for this bucket!

[@williamcoffman7149]

i agree with you Tim, i was very impressed with your trailer and wonder if you can give us all a link as to where you bought it, way better then what ive seen local to me in Utah, and having the 5th wheel capability, i call that a win win..now for the 4 in 1 bucket, i cant say that im impressed with it with the job, the tractor only carries so much weight at the bucket, im guessing if it were me, i now would stay away from that bucket, go for the grapple and the forks along with the regular bucket for the job....again, thank you for your truthfulness, you are helping us regular jo"s out there figure out what to do and not do, and the right questions to ask or ponder when making our purchases......your Family is making a difference with us out there even if you have never met us men or women..... as for me, my hat is tipped for you....

[@TractorTimewithTim]

Thanks for the kind words! bwisemfg.com call them. They will help you get the trailer you need. Tell them you saw the green one on Tractor Time with Tim. They will know.

[@paulbarber6821]

At 10:15, if you had rocked your bucket forward before "clamping down" you would have had much better success. That is one of the biggest challenges I have when training new operators how to use 4 in1's properly. You want the heel of the front clam and the cutting edge of the "dozer blade" both on the ground for as much time as possible when clamping down on something. Love your videos!

[@rexbrooks7349]

We got a 3025e John Deere and we use it for every thing, with a scraper and box blade + the rear quick attach.

[@joeracer883]

That kind of bucket is good to use with gravel. Spreading it out. But looked like you was doing a good job with it. Got the job done.

[@chriskent577]

You were right Tim,to wet not the right tool. That being said you will find the perfect job for the 4 in1 .

[@danimal1611]

Tim, I agree with your assessment of the 4 in 1 for this instance. I think between your grapple or a set of forks you would have been set at this site. Load the concrete onto the pallets and set that in farthest in the trailer for tongue weight. Then the wood, and dirt last from the sides to prevent the sticking to the bed. You do great work. Always different ways to get the job done.

[@TractorTimewithTim]

Forks would have worked great. But I do not regret putting some dirt down first to protect the trailer bed

[@MissippiHick]

We use a 4in1 / we call it a bite bucket all the time. Once learned very useful. Try this open your bucket all the way tilt forward till the open top part of the bucket is just past what your trying to pick up and lower the lift till on the ground back drag the material then tilt back and lower the lift then close the bucket. If you can flutter the third function switch while tilting back lowering and biting the material it works great.

[@benjaminstockton3917]

Another good video Tim Don't get frustrated Tim we all bring the wrong tool for the job sometimes thanks for the video's

[@28cruzin]

Tim, valiant effort with that new bucket. Sometimes I find a tool I bought for 1 purpose doesn't do as well as I expected. Then I use it for something not planned for and it's the bomb! The grapple would have been nice for some of that work, but you still needed a bucket. Maybe bring it along next time so you can switch it when needed. Christie doesn't need a gym membership if she keeps following you around.LOL. Of course you could buy her a drone and a nice recliner, with heat and airconditioning.

[@davidpowell6012]

Product called slip plate works well. Farm @ Fleet sells e z slide a graphite based paint that I put on my dump trailer. Works well and if gets scrapped off you can roll it back on

[@heartland96a]

Also have the e-z slide at Menards , Tractor supply and Bumgaars , the stock paint likely wasn't helping either , nothing like bare work worn steel deck , and as suggested a rubber mallet works too. I d think when ever your dumping run the body all the way up , but try to be on level ground , if a load sticks you can end up twisting the hoist ,even full size trailer dumps can be flipped .

[@photocontrol]

Every attachment has it's advantages and disadvantages, the 4-in-1 bucket is handy, I have a Frontier 4-in-1 for my tractor.

[@joshseigel]

No replacement for a bucket then switch to the grapple I'm picking up on. Grapples are just so amazing hard to replace one. Nice video Tim I love your honesty and reviews.

[@jasone9]

Tim, if you could load the dirt from the sides you can lay down a sheet of 6 mil plastic first which will make stuff slide out much easier. Of course you will have a few bucks in plastic but it's well worth it. It's great to keep the paint nice, but paint doesn't let stuff slide out as well, hence the plastic. Obviously if you want to load from the back it won't work as well because I imagine the tractor will pull the plastic. Thanks for the video, I never felt I would need a 4 way bucket and you confirmed that thought. Sometimes you just don't know until you try it.

[@augustreil]

Spray the bottom with diesel !

[@Jay_mon001]

That is one wicked awesome trailer

[@TractorTimewithTim]

Call em. Tell em TTWT sent you. Bwisemfg.com

[@nomad-pq4yw8iy7v]

Up north here we try not to leave a load in over night in the winter because there's a good chance it aint coming out in the mornin' regardless of the dump angle. If u don't load equiptment in ur trailer a deck over is better(dump wise) that extra height makes for a shorter dumping distance. I like that the sides fold down 4 loading over the sides. I think I use that Idea in the future 4. Someone else said it carry a rubber mallet 2 tap the bed when stuff is stuck.

[@peterkober6758]

Tim Christi fine video you tell it how the world works it's a pleasure to see this gives us insight of what to buy and how to use it God Bless PaK

[@Malakie]

Just realized with your new tractor, you don't have any guards around your lights. I suggest you add them.. In the first 6 months of having mine, I broke my lights twice and had to replace the lenses. I finally put the brackets/guards on and thankfully no more breaks! I have had a few more times when trees, debris falling or other things I would have broken then on yet again... so they have now become a money saver big time especially mowing around, under tree branches and when back in our wooded areas.

[@TractorTimewithTim]

Still have the guards from the old Johnny. Just not enough time!

[@AndrooH]

The 4-in-1 buckets are brilliant for eathworks - as a normal bucket, as a dozer blade, as an opening dumper, or as a back blade. I use mine weekly for all manner of things, but it's not a grapple. When you've played around on earthworks with it for a while you'll like it. Right tool for the job :)

[@crashmw21]

These things happen don’t get discouraged I would say you probably just got excited to use the new bucket Looking forward to seeing it on the next project

[@Mrtinkerr]

You will figure it out. I have had one on my 3320 for years. The right operator can make it do everything you tried to do.

[@bsturgeon2379]

Tractor time with Tim have you thought about purchasing a go pro where it connects to your phone and you could mount it to the tractor and viewers gets a tractor view and you also can still record with different mounts like the self stick and the chest mount and head mount

[@DougAlesUSA]

Incase anyone was wondering 7:09 and the seconds that follow is when I decided I will get a standard bucket and separate grapple, not a more expensive yet under performing 4 in 1 bucket. Thank you Tim for an honest showing of the limitations of the 4 in 1.

[@TractorTimewithTim]

Remember, it was my first experience with the 4-in-1. I haven’t used it much since either. I don’t think Johnny has enough hydraulic flow to use it as it needs to be used...two functions done fluidly to pick up items.

[@DougAlesUSA]

Tractor Time with Tim thank you for your comment. Since you seem to be reading these comments, have you ever considered doing a video about how you find these jobs? I’m not interested in more then my own needs and maybe occasionally helping family and friends for free, but I’d love to better understand your process. Since my son is a KZbinr, he told me in round numbers, he makes $3,000 per 1 million views. So, you can’t be doing all this just for the KZbin content creators revenue. Maybe some product endorsement revenue, but you seem to honest of a person by telling viewers what you like and what you don’t like to get too much beyond maybe free accessories. Anyway, I’m probably asking for too much. I’m really just curious, thats all. I do enjoy your videos.

[@TractorTimewithTim]

Doug Ales we don’t typically discuss that much detail. We get our jobs via word of mouth and KZbin mainly now. We used to use Craigslist, but we haven’t needed to do that for a year or so. We are doing fine financially at present, I’ll say that much.

[@DougAlesUSA]

Tractor Time with Tim, thank you. I respect your answer.

[@scottsendra491]

I would like to see more videos with the 4 in 1 bucket. I am considering buying one, and would be curious your thoughts between a 4 in 1 vs. a bucket and grapple purchase. I think you might need to get more experience with the 4 in 1 to see if your first impressions has changed.

[@queenrocks77]

Thanks Tim. I’ve always wanted to see how these trailers work!

[@Blast357]

hey Tim, you have it when you dump your bucket (the little left right on the joystick that shake the bucket). you can do that while loading as well, it works perfect on difficult stuff.the 4in1 bucket is good on a bobcat but on a "farm" tractor its better to have a grapple to grap stuff.

[@patrochism7700]

Tractor time with Tim that John Deere tractor doing a great job of loading them brakes and everything that dirt is doing a great job.

[@augustreil]

Stop doubting yourself, you did a great job ! I do wish I had those long 2 x 12's ?

[@MrChancefan8]

A small piece of vinyl tape and a sharpie work great for reminders on the dash... “ROPS”

[@jazalessandro3094]

For the dump trailer worked well,only thing is because of its long length it be handy to have a base slider hydraulic system as well,so you slide the base forward as you are tipping the rear for the debris to fall out without getting caught when dumping 👍

[@spacebike420]

I don't have much tractor loader experience but expert level skid loader operator on any skid. I use big farm tractors but none with loaders. I would think that job would be much easier and less messy with a tracked mini skid. I have recently gotten a jd 4720 and realized the tractor loaders are more useful than I though even for some dirt work but a skid really is meant for dirt work a bit more. I've always been interested in a 4 in 1 bucket on a skid but everyone I know that has use one doesn't like it. They say it's less than one real bucket.

[@patrochism7700]

It's holding on Bruce real good tractor time with Tim like I said doing a great job I need thumbs up on that tractor right that thumbs up for you and your wife with y'all got Tom's up.

[@retireddriver16]

TTWT you need to paint the inside of the trailer and your tractor buckets with slip plate it is a black graphite paint it can be found at most ag stores that wet mud and soil will not stick then I do my loader every fall and the snow never sticks in the bucket in the winter love your videos 👍👍👍👍👍👍

[@genedameier8746]

You should have gotten a "Flip Screen" attachment to sort out the dirt/rock mix. See one on Andrew Camarata's YT channel. Why pay to dump dirt. There are other screening attachments. Somewhere there's one to fit your needs.

[@timkd5vmv583]

Once again a great video. I'm sure with a little practice you will get better with the new bucket.

[@GrampysTractor]

Tim I would like to see this same video with the grapple doing the same work you did with the 4 n 1 bucket. It seems that for the small amount of stones you picked up bringing the grapple along and changing back and forth to move dirt too might have been over kill. Take this bucket into your woods and do some land cleaning to see how it compares to the grapple.

[@miketaylor819]

Tim, I’m having success with a clamp on debris fork. I can’t spring for the grapple atm. So I made the decision to purchase the clamp on debris forks. It’s working nicely on my jd3025. Thank you for the information on all the products your using.

[@SledgeHammer43]

The 4 in 1 is great for lose materials like small rock, stone, dirt, bark mulch, stump grindings, or similar items. Its a dozer blade, land plane, grapple works good for brush and final clean up, and a heavy duty bucket.

[@sirocco454]

I’ll have to say that trailer is awesome. Another great video.

[@batman1989keaton]

I watched a clam style bucket on a big loader. He would drag it back with the open portion then clamp it to pick it up. You might try that.

[@joeschratz9360]

The 4 in 1 bucket does work, however it does really show how having the right tool for the job pays off. I like the 4 in 1 bucket for the quality to save trailer space but it does not leave all issues unresolved. It works, yes, but in general it (obviously) does not work as well as the other tools do separately. Overall this was a very informative video Tim, Thank you!

[@VerifyVeracity]

The man driving the tractor sound a lot like me, some times a lot like me. Real nice video to help me know what I want in a tractor & etc. Thanks

[@TractorTimewithTim]

Welcome to our channel. 500+ more episodes on our channel with similar style.

[@patrickwheatley6156]

Do you leave the tractor on site when you have a full trailer? Do you do anything to help from someone coming up and messing with the tractor or even stealing it ? After all you can just go buy a key

[@dennisfahlstrom7422]

Tim, my 4-1 bucket was a $3000 mistake I sure regret. I later bought a grapple and find it far more useful than the 4-1. It is twice as heavy as my regular bucket meaning it won’t lift as much. I’m not happy with this bucket and would never recommend one.

[@gkk2001]

Dennis...it depends on what you are moving and where. Yes, the 4 in 1 is awkward and not the best choice but as others have said, it is a multi tool. I move dirt in some awkward conditions/hills and it works great for that. It moves brush and odd shaped things better than most other options.

[@jazalessandro3094]

Greg K I totally agree & I use my 4 in 1 to pull out mid size stumps & bushes just fine 👍

[@snapperkc9317]

There’s got to be something the 4 in 1 can do....my bet is you will soon be giving it a Thumbs-Up!! Hope so

[@Curious_Skeptic]

Cool bucket. Didn't even know you could get one for a sub compact. I'm sure you will get use to it and find it very handy! Nice trailer! I don't miss that kind of work. I got anxiety every time I had to drive the mason dump to the landfill. I was always the guy with the load that wouldn't come out. "constipated' LOL.

[@henryrodgers3409]

That was a great job in dumping . That dirt was like mud and it's going to stick . Had a tandem dump truck unload a trailer full of manganese at work. Now when I say full I mean a load that's only a few inches high because manganese is very heavy . Up went the box and only 1 side of the box came out . Truck and trailer ended up tipping on it's side . Brand new truck . Be careful when dumping a heavy load making sure both sides are clearing . Not impressed with that 4-in-1 bucket . Like you said a grapple is the way to go. Great video . A good learning curve for your subscribers .

[@hsmith3844]

4 way bucket is pretty nice isn't it Tim? I like mine a good bit, it has a learning curve. It does add a bit more weight up front.

[@genedameier8746]

If you had a "Flip Screen" bucket you could sort that material right there. You could leave the dirt (if he needed it) and hauled the rock away. They are made for skid steer or excavator. I don't know if they could attach to a 1 series or 2 series. Call Flip Screen to find out.

[@patrochism7700]

You always send me a notification when y'all do some old video tractor time with Tim you and your wife Kristi and your daughter.

[@chefmatthammerschmidt8408]

The notifications from KZbin DO NOT COME FROM THE PEOPLE UPLOADING VIDEOS, they come directly from the KZbin Site Algorithm. If you are unable to comprehend that, there are plenty of those videos explaining that stuff. All you need to do is ask the right questions.

[@jjr897]

I personally don't like four in one buckets but they are a good tool but I do like that trailer I'll have to do some research and see if I can get one in my area.

[@TractorTimewithTim]

Call bwisemfg.com. The number is listed at that website. Tell em I sent you.

[@spyder000069]

That is why I like my tooth bar on my bucket. It digs in better and it give a nice extended lip for long boards/tree debris to rest on when its curled. The toothbar can be put on and off with two bolts but I would probably have just brought my box blade on the rear for ballast and smoothing. If you have a strong friend with a rake/shovel then when you drive into the pile he can shove some additional material in to make sure you get a full bucket. Unfortunately for cut logs or those bricks you got to get off the tractor and hand load into the bucket. We all want our equipment to look new forever but unfortunately you are going to trade time for utility if you don't get past that with the trailer. Great video! Oh and you are exactly right. You don't know until you try something. :^)

[@TractorTimewithTim]

Toothbar. Hmm. I think I’ve heard of one of those!

[@rayhogarth8873]

A four in one bucket are good they have there purpose they work good if that,s all you have my self i,ve used all types of attachments but i like a grapple and a bucket and my landplane for grading and a thumb for my backhoe

[@jamesyates5191]

So I was considering one of these 4 in 1 for a 2038R. Would you buy it if you had the Frontier mechanical grapple? I now have added the Summit third function with dual rear remotes. I like the mechanical grapple but sometimes it would be nice to grab something with the 4 in 1 for just a quick load.

[@TractorTimewithTim]

I would never buy a mechanical grapple. The 4 in 1 didn’t work so well for me on the 1 series. Not enough flow to control it nicely, and it is pretty heavy.

[@robthurlow1347]

Generally with the 4 in 1 and 6 in 1 that are quite common here in the uk the trick to using the grapple of the bucket more effectively is to roll the bucket all the way forward open the bucket to full extension and then place it down over what you are wanting to grab. You need have moved the object around so thier is space for the top half of the bucket behind what you are wanting to pick up.

[@bradfoster6255]

I like my grapple it's my favorite attachment, I think you will find the right times to use the 4 in 1. I do like that trailer thats one nice unit!

[@MARKE911]

Love the trailer. I’m gonna have to go check them out. Looks like it’s time to replace my 10K trailer. I don’t recall seeing a video on the trailer I’ll have to go look back and see if I can find it.

[@TractorTimewithTim]

Lots of episodes on the trailer. It is a bwise ultimate dump. Check out our truck and trailer Tuesday playlist.

[@davescott4742]

Tim, like any New equipment...there is a learning curve...find a scrap pile...and play...

[@davescott4742]

Oh by the way...TTWT has been my "go to" for everything 1025r related. I recently did the 50 hr. service, had my tablet right there with me with your video cued up...just to make sure I crossed all the "T's" and dotted all the "i's" .... I really appreciate all the effort you and your family does for the "Johnny-ites" around the World....Thanks

[@dgarzand]

lol honestly thanks for the laugh. I’m not making fun I’m being serious. I remember my first day with the 4-1 lucky I had a teacher but this was classic 🙏🏽😂. Thank you for that.

[@Nerfamus]

I would certainly prefer to use a normal grapple, or normal bucket over this, but if you need to constantly switch between the two I can see how it would be very useful.

[@butchr08]

Tim, I love the trailer and am considering one myself now that I have seen it, Curious though if I am misunderstanding the law or if it is different in your state. My understanding of reading if you ever have a tow vehicle (Trailer) over 10,001 LBS you need a Class B CDL. Can you help me understand if the Class B CDL is required?

[@TractorTimewithTim]

No that is not a correct reading of the law. As long as total gvwr 26,000 or less, no CDL required.

[@joeyshofner639]

That wood, what kind was it? I am a hobby wood worker and seeing good lumber being tossed is frustrating. Loved your video! Can’t wait to see the next one!

[@augustreil]

I kinda got sick seeing those long boards being trashed !

[@shaynesteffens1449]

Tim I hope you and your family are safe and well I have a rand new 1025r how much is a 4in1 bucket

[@nickwalker7478]

I bought my tractor today and your videos have helped a lot. I did go with the 4 in 1 bucket instead of the grappler. I still have time to change. What do you think. I have a ton of brush and logs to move and a deck to excavate for Thanks again

[@TractorTimewithTim]

I would get a grapple over a 4-in-1 any day!!!

[@Ezrider359]

it may help you get a full scoop if you drive into the pile then rather than tilting back on the bucket first lift up on the loader arms with the bucket still flat to the ground and then curl the bucket back while your driving into the pile at the same time.

[@angryoverlanding5955]

I used a 4 in 1 on my 4410 for years and you just need more practice. It is very versatile. Think about opening wide and reaching over, then pulling back then rotating and closing. Also you can open full, tilt forward and place the open forward inner edge on the ground. Then back drag, it cuts in like a box blade. So many uses, just practice.

[@GPOutdoors]

Good morning Tim! That's a pretty interesting design on that bucket. I can see it being useful for a number of things but not as a replacement for a grapple. Question for you - how do you clean up the street after you work on a property? Do you have a broom for the front or rear of the tractor that runs off the PTO? Thanks for demonstrating the bucket and the trailer! Cheers!

[@TractorTimewithTim]

Hand broom and shovel. In this case, customer did it for me. ...with a blower. We have a battery powered blower which we need to put in the truck!!

[@GPOutdoors]

Thanks Tim! Cheers!

[@dananderson8254]

The trailer is awesome