4 Rotor Racecar. Stock Interior. But it's Carbon Fiber.

T-Shirts: www.dahmracing...
Patreon for Build Videos: bit.ly/2koiw8G
Instagram: bit.ly/RobDahmIG
Subscribe to Rob Dahm: bit.ly/1OAN9yi
AWD 4 Rotor Video Series: bit.ly/2QiFduE

[@DwhiteEBrownIII]

"I won't end this video as poorly as the last one..." *runs mouse over timer, sweating*

[@jordanrettig9931]

I was doing the same all video hahahaha you are not getting me again Rob.

[@HadiWijoyo12]

mee to bro hahaha

[@__Tyler]

Lol i did the same 🤣

[@ichoozjc]

🤣 And counted down the last 8 seconds so I didn't have to pop up the timeline on my phone again. 🤣

[@mrmaigo]

Truth.

[@davidblanck4131]

I love watching Robs slow descent into becoming a crazy cat person lol.

[@MattyEngland]

He's a fully signed up member of Pussyholics anonymous 👍👍

[@thex5181]

Slowly showing how old he is😂

[@madmod]

Time to bust out the old Lincoln. Straight boolin' with his kitties cause he's hard af.

[@CleetusDaily]

He probably has toxoplasmosis!! 😂😂 would explain the risky decision making and wanting to go fast

[@testarossagzb5582]

You should see the video on his instagram stories. He's laying on the floor with the cat on his chest

[@jeffro38911]

".... Clipping like a Bethesda game" The truth, it hurts.

[@billybobjoe198]

I just wish they weren't so lazy with their design. I remade the dark brotherhood's hideout and properly placed all the objects just because it was so bad in Oblivion.

[@andrewpeterson5003]

Epic poke man! The stock like but race car is life!

[@keithstephens1022]

I lost it !

[@Sflhunter]

Ah fallout 76 sucks so bad lol

[@ivanreyes371]

I'm playing 76 currently, it hurts too good.

[@CygnusRising]

You need one of AvE's warning stickers on that bandsaw: "Not only will this kill you, it will hurt the whole time you're dying," is a personal favorite.

[@chadgeary2653]

I need to put those on everything I own.

[@joer8854]

It's an oldie but a goodie, "This machine has no brain. Please use your own."

[@PaddyQuiggin]

Maybe the one from the CNC - "not to be operated by fuckwits"

[@Stue-e]

don't stick your dinkie, where you wouldn't stick your fingies

[@CygnusRising]

@@PaddyQuiggin Yeah, but knowing Rob and his occasional self-effacing humor, he might make the mistake of thinking -he's- the fuckwit, and not be as likely to really try and stretch and grow as much with that thing; which I totally don't want to see happen. I know that if I had a CNC with that sticker, I'd feel intimidated to not screw up, even if I was the one who put it there. But a band saw? A band saw absolutely could kill you, and boy howdy would it likely hurt like hell. Granted, you'd probably have to either get rather unlucky, or really stupid to sustain a mortal injury on a bandsaw, it can definitely make the rest of your day a hospital visit in a hurry if you don't respect it, which is what I read that particular sticker is saying by way of "This thing totally has the capacity to kill you, and any injury fatal or otherwise, is gonna suuuuuck; respect required."

[@OutcastAngelV]

Racecars with full interiors really warm my loins. Plus it's just amazing to see the car come that full circle and look so much more complete. I'm so stoked for you Rob.

[@Evildandalo]

Marshall Kell That’s exactly how I feel. If you’re gonna make a bespoke racing car and sink a ton of money into making it fast why not spend some on making it look nice inside and out.

[@boxr_4214]

i mean i’m personally all for the gutted race car look but he doesn’t have the metal painted yet so this is definitely a better solution.

[@jkeid315]

"Our love is public now" I'm dying 😭🤣

[@Grimm-Gaming]

He better adopt that mush 🥺!

[@cryptikreap795]

The "my mom broke those when accelerating with stock turbos" pulled my heartstrings. Always keep stuff like that. Truly humbles a person

[@Sir.VicsMasher]

9:19 Try drilling a hole in each corner of every square section of material you need cut out. It will always give you a clean constant corner radius instead of jagged looking 90's with the possibility of over cutting.

[@brinquedosdepaiefilho]

I love how you're worried about the minimal details so the car is the exact the way you want it. Great job, Rob! It's amazing to see this project finally coming together.

[@KevinBostwick]

I am here for the cat at 5:17

[@dennisdatu6464]

Same here. The cat is why I subscribed.

[@niccadoodles]

I think that cat might of been applying for a new home

[@jimmycreek]

When he said Hi *pauses* at 10:12 I was praying for "Hi, I''m Rob Dahm" idk it just seems iconic

[@TheMrShoebox]

James Glover I’ve never wanted someone to say their name so bad dude

[@thadeusdeckers2082]

same!

[@mr.hanfblatt9152]

"Hi, I´m Rob Dahm and this is why YOU should buy a rotary"

[@joealex65]

A video? This late? Who is this guy and where is the real Rob?!?! 😂

[@gcKukie]

not just that! he ended the video!!!!

[@dalpizzol7427]

@@gcKukie What they did to my boy???? ;-;

[@joealex65]

@@gcKukie I know! He didn't blue ball us for the first time! WHO is this guy?!?! 😂

[@bernardmorris125]

He’s doing adderall again

[@zeman4320]

What sorcery is this?

[@TDean33]

2:19 When I saw Rob posted another 4 rotor video

[@abrahammoua4748]

Came so fast my wife cried too.

[@timmehnz]

lol!

[@VanekLarson]

Getting famous off of comments day 135, no dream is to big so make sure you accomplish all the dreams you can, in the short life.

[@shortvidz9576]

🤣🤣🤣 Hey Rob pin this comment please

[@darshanrao4963]

Wrong hole ?

[@unsearchablethings8167]

😂

[@sparrow082]

With all of the violence that car is going to be outputting, you may want to consider soft mounting your accelerometers. RC racing drones pilots figured this out a couple of years ago, accelerometers and gyros don't like excessive noise and have a hard time distinguishing actual movement from excessive vibration.

[@Zach-ku6eu]

I take care of a stray that adopted our house. Couldn't take seeing her limp through my driveway ever few days from fighting with other cats for porch leftovers. There's nothing unmanly about being a solid provider and a point of comfort to others.

[@Nitrocity7151]

thanks for laying us down gently at the end rob.... Seeing the interior of a car come together after putting so much work into a car is still one of the most rewarding things to me when working on cars.

[@jpsullender]

The ending of this video made me so happy I cried thank you ❤️

[@FoRmaTiTo]

Snowflake.

[@dtdeathmaster]

You’re the best for taking care of the stray cats! Have a few that come around my house that I feed, and one that doesn’t even leave anymore sleep in the garage 24/7

[@gavinxlucas]

Rob I’ve been following this car for about four years now, and I’m happy to see this thing come together finally from the bottom up and it’s still hard to believe what this car looks like after this year alone and I can’t wait until you get go for your first pass in it man.🤟

[@Thrillrider10]

This car is really starting to take shape, and it is so sick.

[@shize9ine]

8:30 “hardmount” yeah get ready for some noisy accelerometer signals. Might need vibration dampening/silicone spacers down the road.

[@164customsandtutorials4]

shize9ine this is true

[@gibble75310]

idk about how loud it would be but i feel like the engine would be way louder anyway

[@captainzoll3303]

I wouldn't be surprised if that sort of noise doesn't affect the drivetrain that much, since it would more work off really consistent, larger movement.

[@boxr_4214]

gibble75310 they mean noise as in the data looking really jagged not the car being loud.

[@geraldleatherman1899]

I know I'm just some guy commenting on a KZbin video, and it probably doesn't mean much, but I can't tell you how much I absolutely love, and admire what you're doing here. Having been a huge fan of rotary motors, and RX-7's since.... well forever... seeing it taken to the extreme like this, while teaching yourself, and how your learning the entire time, is awesome!

[@BlueDually4x4]

Really like that you are still taking time to get the details of the build finished as well as the important parts in the time leading up to the race. Time crunches usually hurt the details, but they pay off.

[@LikeZO]

Finally, some closure at the end of a video. I can move on with my day feeling better 😅.

[@hunterbean7953]

rob makes a friend, that wholesome moment with the stray gets my like

[@Altzio-]

MAD respect for NOT gutting your racecar’s interior rob

[@guidoheeling1179]

i follow a lot of car channels, but you are my absolute favourite Rob! you do everything yourself even if it means it goes wrong the first time. i think you are a great inspiration!

[@mikeeyyss2150]

If your going to cut material that creates a lot of dust, you should hook up a Shop-Vac and put the vacuum tube near where the blade is cutting, so it sucks up most of the dust in the predominate area.

[@johnxsantos]

Man those door door cards :( why not just got with a solid piece of CF rather than destroy it all?

[@curtlonbryan2167]

I'm sure it's an emotional thing. Retaining as much original as he can is probably a cathartic feeling. Even little things like the broken handle on the passenger side probably just serve as reminders of how far this car and project have come.

[@rotaryperfection]

I hate seeing good rare parts destroyed like that. I would have just made another panel later down the line.

[@MAXspeed7]

lrbspeed.com/product/fd-aluminum-door-panels/ they create a lot more room in the cabin too, stock fd door panels are fat af

[@thatwolffe3802]

@@MAXspeed7 yeah but these aluminium panels look like shit and he wants to keep that street car look.

[@dillonc4508]

@@MAXspeed7 he could easily make his own just like that

[@nils_pltr]

In Germany we say "Kabelsalat" (cable salad ) to your wiring

[@garageadz]

In Australia it's "the forbidden spaghetti"

[@nils_pltr]

@@garageadz hahaha nice

[@brianbeilmann2992]

That cat is love with bud. Friend for life now.

[@justanothermorty]

The cliffhanger was worth it you blueballing bastard! I love you Rob Dahm!

[@ryansmith9559]

It's so rad to see this incredible car come together piece by piece.

[@tylerlarsen1167]

I like the endings!!!! I will like every video from now on that has an actual ending

[@StraightLineCycles]

Its way cut up, but its also way badass, good job my friend. I love it

[@randybooth9192]

Thank you for the ending we all needed that🤣

[@helistorm98]

that is going to look SO GOOD!!! love the stock vibe

[@arrivendrive6831]

Great job Rob. I love the fact that you are taking the time to do this build right. Brap on

[@SSDillan]

Yes!!! I asked so long ago if you were doing full interior on Instagram and people bitched about me asking a simple question! You even replied saying you were going to!

[@johnpol41]

Can’t wait to see it finished every time I come home and see ur videos I get so excited

[@kevinortega9428]

I don't know what you're talking about Rob but I love the ending of the last video😂😂😂

[@Silkkspyder44]

Love robs videos. The animals make them even better. Thanks for loving the cats.

[@ivangabriel3472]

Loving to see your progress with the cats :D, also the car, looking great

[@Mattvokes]

Anyone would have got new seats but no rob dahm has to customize everything. I love his out look on everything 😂😂

[@timmytblack128]

Yessss I hope this thang as full interior. Or at least what pieces you can fit inside. Feel like it will look soooo good.

[@williamdunn4811]

When you machine composites it's best to use carbide or PCD(Diamond) cutters. Composites are very soft materials and are most similar to wood working in some ways. Set your RPM's higher than metal working and be gentle with your feed rates. The type of resin(epoxy/polyester) used in the layup can be harmful to breathe in depending on the Resin type. If you ever wanna fabricate your own CFRP parts check out a company called Rockwest Composites out of Utah and they sell all the necessary raw material to make what you need. Aluminum oxide sandpaper and scothbrite to finish. The maroon scotchbrite fine grit pads are used frequently in the aviation industry to deburr holes in composites. Monster Diamond Hand Sanding Pads can leave a quick and nice finish without throwing carbon dust into the air.

[@chrisjohnson9755]

Rob put thin rubber washers or something between the AEM Vehicle Dynamics Module and that metal plate; I am an engineering student working with IMU’s similar to that, and the high amplitude, high frequency vibrations of your drivetrain will create a lot of noise in the accel/gyro data. Mounting it with some sort of isolation, like rubber spacers, will filter out the high frequency “noise”, that is not useful for your ECU anyways. That rigid plate is a great mount! Talk about solid!!! Will make sure the IMU doesn’t bend under the massive g’s haha.

[@squidikka]

Please adopt that kitty. She's adorable.

[@CyberRAWRfareXD]

Today in history one positive thing came from 2020....and that was Rob ending a video the right way!

[@aimanarywan1943]

goodluck on your car man! ROAD TO 1 MILL!!! LET'S GO!!!!

[@juanjolivares3291]

Glad to see it coming together especially the interior

[@xmoto7377]

The pure fact I am seeing the interior in this car again fills me with joy

[@jasonrieger6001]

dude this car looks and sounds so badass.

[@SacUnDruz]

To get those pesky carbon fibre edges clean and straight is a chore. I used to take a eccentric sander/grinder with a 120 or 180 grid sandpaper to clean these up. The flat sanding surface of the pad makes it easy to get your edges straight and you can take of minimal amounts of your material if you want to trim it just a hair more to get a really good tight fit around your panels. You can also use a Delta-Sander to get into tight nooks and crannies or angles. We used a Festool ROTEX RO90 or smth like that, these things made quick work of said edges. Remember that taking material away is easier than putting it back on :D

[@Shawnster509]

Since when does rob not leave you with a cliffhanger?! Well done Rob!

[@ahmedalfahdawi5203]

finally put the interior in, looks good mate

[@magicdevile]

Glad I got to see the 4 rotor naked for as long as I did, I'll miss its mechanical looking insides!

[@Matty.Hill_87]

Those welds are getting good now, you where stacking dimes on that cluster mount 👌

[@adamfrbs9259]

Almost shed a tear with that end of a video. Lol. Well done. Good unique thing to do, and fun...keep it up.

[@eastyyx]

Rob please use some rubber dampers or something under the accelerometer the vibrations from the solid mounted engine will add a lot of noise to your signals

[@joshuajones3656]

It's the finer detaisl like this that are possibly my favourite touches to this build 👌

[@alexandermanthey1822]

Best thing to watch during dinner

[@rafiqsoufiane2723]

a good ending to a rob dahm video!! 2020 is getting better yall

[@bjornsymoens6539]

When cutting carbon, use a shop vac right next to it or get it constantly wet to capture the dust. Also use a pneumatic tool over an electric as the carbon dust is conductive and tends to f*ck up electric tools.

[@tflLoTuS]

the absolute mad lad cutting oem black panels

[@honorthyself8921]

Breaks my heart to see all this cutting but I’m eager to see the end product!

[@nathanphan5781]

aye a proper ending, we love you rob no homo

[@3959tasha]

She's getting there Rob, I was wondering what the hell you were gonna do with the interior... It looks awesome. 👍🤘👊

[@AdmissionGaming]

Rob it is absolute paramount you install that accelerometer in the back of the car for the gtr awd system. There is a reason why Nissan relocated it to the rear in the later model 33/34 gtrs.

[@scoredbuffalo31]

I never though I'd see the day where Rob does a proper ending

[@Snekul_Xfire11]

I love the whole cat arc running alongside the 4 rotor story

[@philspaghet]

First Minecraft Steve is added to Smash and now Rob Dahm made a proper ending to a video! I don't know what is real anymore XD

[@jijisniet]

10:13 i thought it was going to be the nostalgic "hi, im Rob Dahm"

[@JohannesKonow]

2:20 is that guy wearing an emperor Tshirt? 😳 Yeah buddy 🤘

[@sltillim]

Robs helpers remind me of the security kids in project X. I’m old.....

[@petergreaney1328]

Where’s the cup holder when you go to drive thrus 😂

[@he1lr1ser]

"Since compassion for animals is so intimately associated with goodness of character, it may be confidently asserted that whoever is cruel to animals cannot be a good man"

[@meadspeed5111]

Look a shocking rare sight of a fd with a interior lol nice super pumped

[@RohithChandrashekar]

Thanks for 4k upload bro

[@joemcgill2925]

Loving the daily uploads rob amazing achievement you have done

[@jboymiller17]

i wasnt about the stock interior until you said the part about your mom and the handle. so nostalgic and humble

[@makeitwork583]

Great work boys, this is the fun stuff, eh?

[@SHAD0WxF1R3]

Rob is what every man aspires to be, a badass car builder and a cat tamer 😂😂

[@matthewclimer3589]

Rob try a heat gun you may be able to melt the plastic enough to deform the door card to the seat. If a heat gun doesn’t work use a torch slowly.

[@ALLGODSDIE]

Rob damit stop being a sick tease to us..lol..we need longer video's..for the love of GOD!!! HAHAHAHA

[@itsameyaboi]

Looks good Dahm, solid work as ever 🤙

[@jaimedominguez5676]

Once this car is done please take it to the freedom factory !!!

[@mannymakesmusic891]

Finally, Rob knows how to finish

[@auddioduck6492]

Unreal. This is all unreal brother man

[@dongonzulman6478]

good ending! nice to see it looking like a car

[@TonyWestDIY]

Oh hell yeah Rob. It's looking amazing 🔥.

[@garrettmartin6267]

You said you wouldn't do it again and I just assumed the video was just gonna end .2 of a second later, lol It felt weird when it didn't end

[@demonsamongstmen562]

THE ENDING YOU ACTUALLY MADE AN ENDING I'm proud of you rob lmao, also now you can make a custom shift boot, personally I wouldnt make it go all the way up the shifter shaft id make it so it goes about halfway that way it doesnt look funny

[@christopher5694]

"Clipping like a Bethesda game..." Love it!

[@timrattenbury4768]

Chris topher were dose he say this.?

[@shona5512]

@@timrattenbury4768 3:36

[@destructionlordS]

hey man with the power that car makes I would recommend a kevlar transmission blanket I like the videos and you seem like a decent guy and I don't want to read about something going wrong and you getting hurt it's just another layer of safety keep up the good work brother

[@matthewb9241]

Once you get everything with the dash and center console figured out you should have someone make a one piece composite for those 3 pieces so it’s just one clean piece.

[@maddog9659]

Looking good Rob, keep up the good work.

[@wertfreund2480]

Can't wait Rob!! So friggin c o o l to see this 4Rotor soon rip some Tarmac !!! !♥️♥️♥️♥️

[@sammead5183]

4:58 is the content I'm here for