4 Ways To Mod and Accessorize Your Leatherman Wave Multitool!

[@voongnz]

Lol I went super budget with my bit kit mod and just fed a zip tie thru those holes at the top. Holds nice. Quickest "mod" I ever done, took all of 5 secs😅

[@hvacbudget8600]

Nice!

[@AtomicBleach]

You can get some DIY rubber Talon grips and cut them to the shape of the wave or whatever multitool you are using. They specialize in pistol grips but it works well for many hand tools and multitools.

[@hvacbudget8600]

That's a great suggestion! I'll look into that.

[@SmokinJimOutfitters]

Where do you get the talon grips. Why do all you folks says stuff and then not follow through. I call that half assed.

[@AtomicBleach]

@@SmokinJimOutfittersim seriously not gonna hold your hand. Nearly all the knowledge in the world is one Google search away. I gave you the main subject. Now it's your job to research further if you are interested. 👌🫡

[@Sparticus3117]

@@SmokinJimOutfittersGoogle is a thing ya know. Literally one search and bam. You have your answer.

[@knifetrain3118]

I’ve been using Talon grip tape for everything I need some extra grip on and it is an amazing product!

[@hvacbudget8600]

Very cool!

[@nucleartime]

Dragon Grips sell 5x7 squares so you don't need to faff about with the sets of precut smaller pieces.

[@hvacbudget8600]

Good point!!

[@ВикторКир-ы7о]

Доброго дня, где взять такой внешний битодержатель?

[@hvacbudget8600]

I modded it from the Gerber Armbar slim tool.

[@ВикторКир-ы7о]

@@hvacbudget8600 Привет, есть видео установки в Leatherman wave?

[@RandoWisLuL]

is the bit kit worth it? the more i read, the more i see Wiha and the extension more worth it and how soft the Leatherman bits are. would cost my $24 for the 13 double ended bit set and the extension.

[@hvacbudget8600]

Good point. The bit adapter with 1/4" bits is ultimately the best option if you use the bits a lot.

[@RandoWisLuL]

@@hvacbudget8600 have you found them to be soft? i do see mixed results in forums

[@justyou9314]

What an outstanding mods, bro. Nice Gerber's bit adaptor u got. Why dont u put a serrated hook knife as well? 😎😁

[@m005kennedy]

Have the grips started to come off later?

[@hvacbudget8600]

Not really. They are working good!

[@Ben-t1s4o]

At 0:13 I see you replaced one of the 4 out board tools with what looks like a fold out bit driver for full size bits? Where did you get that or who makes it?

[@hvacbudget8600]

That is from off the Gerber Armbar Slim Drive. I have a video detailing that mod that hopefully should explain it a bit more.

[@hvacbudget8600]

"2023 Leatherman Wave Rogue multi tool bit driver mod"

[@Ben-t1s4o]

@@hvacbudget8600 Yes. Thank you for the reply man. Awesome.

[@93MichiganFootball]

I wanted to love the Donk clips, I like the look of them and ordered two last week, but neither of them fit my G10 Charge+ and had to return them. Just a disclaimer, I tried them in all three G10 Charges that I own. Seems like people have had more success when using on a Wave.

[@hvacbudget8600]

That's too bad. Are the scales too thick on the G10 Charge for them to work?

[@93MichiganFootball]

@@hvacbudget8600 I’m not sure if the scales are an issue, but the shape of the tips of the Donk clips are pretty different from the stock clip. I was able to force the clip on the tool with some effort and tried to work it in, but the lock bar was semi depressed inward and I wasn’t able to get the clip out.

[@D-Man-lv9vu]

Mine worked great on the G-10 charge plus. I wonder why you may be having trouble.

[@thisguy2659]

Does that micro bit adapter fit in the bit kit?

[@hvacbudget8600]

It does actually. Just double checked.

[@richardsullivan1776]

Do you like that Leatherman Charge Plus in 154 CM Steel? How does it compare to the Wave Plus?

[@hvacbudget8600]

I do like it, but I'm almost underwhelmed because I've heard the Charge so hyped up. But it is a great tool. I'll probably do a first impressions video on the Charge next week.

[@richardsullivan1776]

@@hvacbudget8600its basically a Wave Plus with harder steel and a gut hook on the tip of the serrated blade. There's no change in any of the implements besides that.

[@edwardwilliams6514]

Very helpful.

[@InGratitudeIam]

You economized on the use/application of the Dragon Grip tape but were too cheap/lazy to prep the surface with alcohol so it could stick longer? Brilliant. If only Leatherman made a pouch that attached to your belt so you could carry the multi tool and useful accessories, while freeing up pocket space.

[@JaspisB]

Your change pockets must be MASSIVE if that fits😅 Thanks for the nice ideas and great video, as always!

[@hvacbudget8600]

Well, I suppose it doesn't completely fit all the way. LoL! But mostly.

[@zachlyndeYT]

Love the video! If you're looking for Leatherman parts, I'd love to send a few over to help out the channel. Keep these mods coming!

[@hvacbudget8600]

That sounds amazing! Contact me at [e-mail] if your interested. Really appreciate you watching the video!

[@zachlyndeYT]

@@hvacbudget8600 Email sent!

[@hvacbudget8600]

@@zachlyndeYT Nice!

[@repairmanlevi9656]

How bout a custom pocket clip for the K4…that is thee uncomfortable clip in hand. Like something that don’t dig in your hand.

[@hvacbudget8600]

That sounds like a good idea. Not sure if there is options out there. I'll have to check.

[@TBEDC]

Very cool

[@hvacbudget8600]

Thanks!

[@rorymoore2]

If you double nut the bolts then you won't need the Loctite.

[@hvacbudget8600]

Great idea! I like that.

[@edwardfletcher7790]

You could also replace the two bolts with a single small zip tie...

[@hvacbudget8600]

@@edwardfletcher7790 True. With the bolt system you could link multiple bit kits together almost like a bicycle chain at the top, but most I would assume would only be interested in the full kit which could very easily be ziptied.

[@SmokinJimOutfitters]

Finally you told us about dtagon strips. Thank you.

[@SmokinJimOutfitters]

Why don't you dir3ct us to a site where we can purchase a leatherman. No excuses!

[@wojtaswrr]

Użycie mikro wkrętaka wpiętego do multitpol jest mało wygodne

[@otaño-m4d]

🍀🍀

[@k1llerghost736]

I love deez nuts at the last tip.😊

[@sbprime2483]

tool review: nice color, look how shiny,, its so pretty=thumbs down

[@diegossssilva]

Hy there! I'm from Brazil and I like so much your channel! Congratulations... Is there any group on discord or telegram around the subjects that you discuss on your channel? I'd like to participate and interact more with people like you and me who love test and mod multitools 😅

[@hvacbudget8600]

Thanks so much for watching! There is the: Multi-tool.org forum Leatherman mod Facebook group Multi-tool World on Facebook Leatherman Group on Reddit I know there are EDC discords probably multi tool ones as well, I am not sure though.