I have been there, you can modify the factory rail to run 850s in primary, but what I did was run stock 550 on bottom and 2200 on secondary with the pfc. Works good
@zoomzoom93rx73 жыл бұрын
Once you've got everything installed, can you do a video on how to setup the injector info on the PFC with the ID injectors pls.
@TonyWestDIY3 жыл бұрын
I changed the ecu but I can do some research and make one. You just have to know the ID injectors lag info and the FC edit software.
@zoomzoom93rx73 жыл бұрын
@@TonyWestDIY I bought my car from previous owner and I want to upgrade to higher injectors. ID1050x Primaries and ID2600 secondaries. I do have the FC edit software but just confuse on what to put into the Inj info on the Datalogit.
@TonyWestDIY3 жыл бұрын
@@zoomzoom93rx7 and you still will need to adjust settings. I'm not sure but 2600cc seems to high for the PFC. That's why I ended up getting rid of the PFC. You just pick the injectors you have and new ECUs will take care of the rest. I'd recommend the FC-Tweak. The link is on my wideband video description. It helped me a lot when I had the PFC.
@zoomzoom93rx73 жыл бұрын
@@TonyWestDIY What ECU did you go with?
@TonyWestDIY3 жыл бұрын
@@zoomzoom93rx7 Adaptronic
@jamfd3s7883 жыл бұрын
is that a rywire engine harness? how have you liked it I'm looking at getting one if that's the one you bought.
@TonyWestDIY3 жыл бұрын
Yeah. I'll be covering the installation in the upcoming videos but so far so good.
@jamfd3s7883 жыл бұрын
@@TonyWestDIY nice, thank you, you are the only one that has made videos on a setup like this with the turblown manifold, radian rails, rywire harness so thank you for the content it’s really helped my build!