44-Key LED Remote Guide | Wave Lights

[@welingtonweiss9402]

Simple, straight to the point and very useful. Thumbs up for this one!

[@glvosy]

i really needed this, i just ordered led lights 3 days ago and i have no idea how to work the remote so im looking on every single video

[@limegreentechnologies8803]

Wow thanks so much i never knew what the diy option was👍

[@teghanschannel7246]

Please do a video on how to set these up.

[@Brandon_Veza]

Teghans Channel we will work on making a video, but for the mean time, we do have an installation guide on our site thewavelights.com/pages/led-strip-light-installation-guide

[@laylai1261]

You have to get the LED light strips

[@lilgoku7018]

There's no way to set this to Flash or Fade 1 single color is there? It seems as tho it comes pre-desinged to only flash, fade, and jump certain colors.. If you know of a way, where I could only fade a single color, please let me know.

[@jasonjohnson626]

I'd like to know this too. I want to be able to fade between different shades of red and purple.

[@prochaskies]

thanks for making this vid, it helped me.

[@kingnasirthesecond]

where can i buy another led strip. part of my room isnt fully covered

[@weldingpost5806]

How to fix switch on/off on remote when the other switch normally because i can't turn off my led strip by remote??

[@MustafaGARGI]

You can set one of the DIY buttons as all three colors fully faded.

[@chaeyoonnam3658]

Idk how to explain it but perhaps in pressing the purple key, both blue and red lights up and no matter what i do it doesn't light like per bulb (dunno the term) please helppp me

[@localwhitesistervlogs8286]

Same

[@chaeyoonnam3658]

​@@localwhitesistervlogs8286 try buying RGB 5050 strip lights instead. the 5050 lights per bulb (rgb colors are in one chip so it displays the same colors every chip, or perhaps bulb to explain it easier)

[@S1nTr0p]

how to save my programed color to DIY button?? It resets to white every time I switch to different color and go back to DIY button...(

[@fredyb9289]

Press the Sam diy button 3 times after you have done your colour

[@S1nTr0p]

@@fredyb9289 it resets to white after first press... I think it's a bug..

[@sanne5358]

Vova I have the same problem

[@LeNhi-uz3qj]

Help, i have that problem too

[@yourlocalhippie8527]

help mine only has 3 colors red blue and green idk what to do

[@fabiolaboria1434]

Iris Rodriguez same!! how did you get it to work?

[@qwuenhhh2142]

Fabi Bundle same! It’s so annoying

[@blueberry_juice8562]

same we probably got the wrong ones

[@precioussss1862]

My led lights are coming soon but I belive that the three main primary colours are the R G B you make colours from that you basically mix then I belive you could click red 20 times then click green 10 times it will mix and make a colour play with it until it makes the colour you want plus you can make it darker or lighter so you should be fine 💕(Jesus loves you)💕

[@kayajacobs661]

@@precioussss1862 where are you getting em from

[@soph8691]

Where’d and how’d u get them bc I wanna find a good one but I need to know the name first

[@carjunkies3010]

Quack Quack i just got my wave lights in and i have no clue how to set them up

[@Brandon_Veza]

Our site is linked in our video description. Most orders arrive within 3 days.

[@12345boomhower]

Is there a way to set to red green and white

[@happydr34ms]

When I turn off my leds they turn a really dark not bright blue, does anyone know how can i fix it? They just completly turn off when I unplug the power suply.

[@michaelsoliz428]

what do the first 2 buttons do on the top left?

[@johan8077]

Brightness

[@migelsantos9652]

Are these good

[@jasonjohnson626]

Is it possible to change the fade colors from the basic red blue and green? Like can I program different fade patterns with the DIY buttons or can those only save single colors? I want to be able to fade between different shades of purple.

[@Brandon_Veza]

Not with the 44 key remote. You would need Wifi LED Strips that connect via a mobile app. That will let you create custom modes

[@frealesswarlock1899]

Can you do this with a small remote???

[@miss_avani_325]

omg tyyy so much you helped my im getting mines but thanks you helped me alotttt

[@chloevaldez3616]

Hi i bought led lights but only 2 colors are working. green and red. idk why

[@Brandon_Veza]

We’d recommend asking for a replacement led strip

[@carterhayes]

Whenever I click I color on my led light big remote it gives me two colors, how do I fix this?

[@prodbytruity]

that’s what mine does did u figure it out? i just want purple and it gives me blue and pink😂

[@ladylenenebab8801]

did u figure it out now? please help

[@smpmasbang9714]

Same

[@aestheticgal3033]

Ok idk if it’s just the led lights that I got but any solid colour I try to make for instance purple or pink there are little red blue and green lights still there so it just looks like red blue and green it’s rlly confusing and I can rlly explain it but if anyone knows why pls tell me

[@smpmasbang9714]

Mine as well, do you know how to fix it? Can u teach me how? Lol

[@Rozaaliya0]

pls answer me. i want to edit the colors but i can't it's not working. pls help me bc idk how to do that😕

[@Brandon_Veza]

Are you saying the DIY buttons don’t work? Or the entire remote?

[@Djmax-mi5kz]

@@Brandon_Veza the DIY button works for me, but when I click to make one it just white and I long press on the arrow and nothing happens

[@Brandon_Veza]

If it’s white, then that means all the arrows are pressed up to 100%. You need to reset the DIY button by pressing down on the arrows, each one at a time, until the LED turns off. Then you can begin pressing up again on the arrows to make custom colors. Think of it this way: White = Red at 100% + Blue at 100% + Green at 100%. But if you set these value to 0%, the LED Strip will turn off. Then you can begin making custom colors.

[@blueberry_juice8562]

me too we got the wrong ones probably..mine show just green,red,and blue.

[@zacshaw7918]

my remote just won’t work, i’ve tried changing batteries, holding it right next to the censor, and it still wont do a thing

[@conscious2270]

Damn, its either the sensor or the remote is broken

[@Brandon_Veza]

We have replacements on our website that include the remote + receiver. Thewavelights.com

[@avagarcia5098]

Mine doesn't do that I have same remote I have a KZbin video of it can you see it and help

[@wilhatfield2099]

I can’t do diy, why? I’m doing the same things in the vid, pleas help.😑

[@zetaroo9602]

hold down the button, and start by using the down arrows first.

[@bigmanz7163]

Thank you so much

[@iso1664]

You shouldn't turn the lights on while they're still rolled up.This can cause overheating and can kill your led strip

[@cittoyt]

very helpful tysm

[@Brandon_Veza]

Glad it helped!

[@yyr0se]

Thank you so muchh

[@stephaniecano1793]

I ordered mine from wish and I put the battery in and everything but it doesnt change colors idk what to do

[@brooklynnsanders1321]

use it where the cord is

[@altamashparwaiz2097]

I want to know how to set default colour everytime i turn on and off using socket

[@Brandon_Veza]

Just turn it to the color and it will remain there every time you plug and unplug the lights?

[@ghostily]

what’s the difference between fade 7 and fade 3?

[@Brandon_Veza]

It’s named after how many colors it switches between. So fade 7 has 7 colors while Fade 3 only does 3 colors

[@ghostily]

The Wave Lights thanks ! x

[@jasonflores802]

Im planingnon buying these (i will im jealous that my friends EVEN MY 7 YEAR OLD CUSIN HAVE LED LIGHT AND I DONT AND I 11 but I will buy them they look amazing

[@emmaxashley195]

it doesn’t work for me :(

[@ervinjhaymartinezarista8496]

Why isn't working dor me

[@ashleyfayeorongan8253]

Why does mine is not working

[@Brandon_Veza]

Checkout our favorite LED Choice: amzn.to/3mgun5s

[@hannahnoysa9134]

No sound? Seriously?

[@jaeeeomariya6958]

My green button doesn’t work none of the greens not even the arrows for green what do I do?

[@Brandon_Veza]

Do the other buttons for different colors work as intended? We also have remotes on our website if you need a replacement. Thewavelights.com

[@jaeeeomariya6958]

@@Brandon_Veza no the other buttons don’t. The only ones that work is red and blue

[@jaeeeomariya6958]

@@Brandon_Veza and also will it still work if I buy a remote from your website when I got mine from eBay?

[@Brandon_Veza]

As long as your lights use the 4 pins to connect, yes it will work. We send you a IR receiver that connects to the lights, along with the 44 Button remote.

[@jaeeeomariya6958]

@@Brandon_Veza four button pin as innn?

[@juliaw6051]

My green doesn’t work what do I do

[@jaeeeomariya6958]

Same. Did you ever figure it out

[@theemarkel]

My remote is not working

[@okaggee]

what is the difference between fade 3 and fade 7?

[@Brandon_Veza]

Fade 3 only switches between 3 different colors and Fade 7 switches between 7 different colors.