HUGE Magnet VS Copper Sphere - Defying Gravity- Will a Neodymium Magnet Float Inside?

[@Nighthawkinlight]

Really clever idea! You might try painting the copper black and playing with the shutter speed of the camera to get a stroboscope effect that will make the copper look like it's not rotating so fast. Alternately do a really slow shutter speed so the cage is a blur and the sphere stands out better since it moves slowly

[@DVSS77]

The stroboscope effect would be great to look at!

[@terracar2003]

Hey, love your videos! I was curious as to whether or not you have considered making content about the potential uses of thermoelectrics in personal temperature control? Like a air-conditioning suit using that thermal fabric of yours alongside a thermoelectric cooling pad.

[@SeanBZA]

Or put an optical sensor on the drive, place a slotted disk on the shaft, and use a LED lamp, so that the lamp only shines when there is a view into the sphere from the camera. Will need to be optical simply because magnetic will not work with that massive field. Copper sphere would be best also heavily plated with silver, to reduce skin resistance, or of course if it was cast entirely in silver as well, either pure, or alloyed with copper like coins, so you get a harder alloy, but still with lower resistance.

[@dakken74]

You should try a strobe lightand and try to match it to the shutter speed of the camera

[@NapoleonThe12th]

You beat me to suggesting painting the magnet! It's fine, I'm already subscribed to you. I was going to suggest a bright blue paint to contrast with the red copper.

[@twixerclawford]

The fact that the metal casting process you have is so precise that the pieces come out with obvious layer lines it inherited from the original 3D printed pieces is absolutely incredible!

[@bundzmykhailo3733]

I also saw thi! It's amazing. Looks like he printed it on some 3d printer from future (that can print precisely with melted copper)

[@detijno4]

I’m a goldsmith and we can pour metal to 0.2mm thickness. It’s amazing.

[@stigmautomata]

Copper is also notoriously difficult to cast and he didn't even mention it O_O

[@jwalster9412]

​@@bundzmykhailo3733 There are metal 3D printers, but from what I understand they are bulky and work way different to plastic printers.

[@IndependantMind168]

This is called investment casting. Look up lost wax casting. Been around for a while

[@matttgray]

<a href="#" class="seekto" data-time="475">7:55</a> YOU NEED TO CHANGE AXIS OF ROTATION - that slice is disrupting the eddy current / Lenz’s Law, and the orientation is exacerbating the issue. You're rotating the sphere around the poles, and the slice is along the equator. If you move the axis of rotation to the equator, it will allow for larger, more continuous eddy current loops to form. There’s a short titled “Can a non-magnetic material be stopped by a magnet?” by tamuphysastr that overviews this concept pretty well

[@crains8087]

Or have a different design for the copper sphere that allows the eddy currents to form. The structure of the sphere, with all those holes, is limiting the size of the eddy currents. Try a sphere with bands perpendicular to the axis of rotation. I'd also try it with the cylindrical magnet inside the sphere.

[@HB-et5iv]

No rotating over the poles. The magnet will always turn to align its poles with the axis of rotation, i.e. so that it feels the lowest forces. For the same reason it starts rotating with the sphere until the speeds match, the eddy currents cease, and it stops levitating :(

[@skywolfbat]

It's 100% the shape. It's creating patterns in the eddy currents which want to follow the shape of the copper. Remaking the mold with a band like structure (Think a spherical set of jail bars that meet at the poles) might give a better result. Or, if you wanted to have the bars of copper going along the axis of rotation, clip them in a cage like formation with plastic bars running one way and bands of copper running the other.

[@prestonburton8504]

very good!

[@captcandyman]

What about counter rotating the two halves of the spheres

[@Alexandermhinton]

I cannot believe how good the cast turned out. Shared the link with a buddy who manufactures out of PLA for a US company. Very impressive work!

[@glen1arthur]

The copper sphere is by itself just cool to look at.

[@getoffamylan6844]

Am I the only one that thinks copper and bronze look better than silver and gold?

[@e1123581321345589144]

@@getoffamylan6844 nope, not the only one, copper is my favorite look.

[@WilliamCheung-h2c]

I want one!

[@pikachu5188]

Should it not read Neodymium sphere inside a Copper polygon. lol 🐾 _Montréal 🇨🇦_

[@Soren_Skarsgard]

It's a soccer ball ⚽

[@itzmetanjim]

<a href="#" class="seekto" data-time="661">11:01</a> when drilling at n rpm, put the camera to n/60 fps to make it seem like the sphere is not rotating

[@GearboxEnt]

of have long-enough exposure time to fully blur the sphere at speed

[@robspiess]

The "sphere" has 60º rotational symmetry, so you can multiply that stroboscope by 6 (n/10 fps): 60RPM = 6fps 120RPM = 12fps 300RPM = 30fps And use a short exposure time (with lots of light) so as not to blur the sphere to help it look stationary.

[@jmquadros]

A stroboscopic light at 1/10 the RPM would give a better effect than changing the exposure, it would also be easier to synchronize with the holes of the copper sphere

[@LeonardoG1981]

@@robspiess I thought that if he matches the RPMs to the FPS it should be enough, because each frame would equal one rotation and would capture the truncated icosahedron on the same position every time, making it look stationary, so we should be able to see through one of the openings as if the truncated icosahedron was stationary.

[@rudrodeepchatterjee]

I mean that's a surefire way to get it to look stationary,but given there is a symmetry in the icosahedron​, there are multiple sweet fps spots to get that effect. @@LeonardoG1981

[@MrDavePed]

Try using a somewhat smaller spherical magnet. Something with less mass. Very cool !

[@poelmeister]

Underrated comment.

[@mylivingsky]

Yup!

[@mando719ad]

I'd use a small magnet.

[@MichaelBransonCoach]

hollow sphere supermagnet? Even a bunch of those bucky ball magnet toys of tiny magnets on a thin sphere would be cool

[@jawa7609]

Cast a thinner/Sand down the inner circumference of the chew toy? Make larger holes in the sphere? Weaker magnet? My thinking is the Hall Effect is overwhelming the power of the magnet because of the volume of copper. Even at slow speeds, there's too much resistence being generated by the sheer volume of copper in relation to the volume/effect of the magnet. In other words, Too much flour, not enough eggs in the cake. Try a larger area around the magnet, a smaller magnet, or less total copper around the magnet via larger holes. One/all of them are your solution. Find a ferrous sphere magnet and see what happens! I bet you could do higher speeds purely because of the MUCH weaker interaction between the materials.

[@make.anything]

Great idea and even better execution. What a beautiful object! Thanks for sharing :)

[@hitman1048]

Never seen such clean casting anywhere, Bravo

[@pahom2]

He sandblasted them

[@Kryptic712]

@@pahom2 even still, the purity is nice

[@will_hudson]

@@Kryptic712 It's the temperature. He also didn't show if he removed any slag.

[@justfun7322]

Plug in your Tesla Coil and let the magic begin

[@rogerd4559]

That is because he is not from china where all they do is turn out low quality defective crap

[@dsndicmsa7141]

This thing is going to create so many conspiracy theories when it's found in 2000 years in his basement.

[@JB-fh1bb]

Underrated comment. How many of the ancient mysterious artifacts were one-off experiments by one or two people?

[@SyntheticFuture]

By that time this would just be some "dumb ancient tech" 😅

[@Anna-Sofia_L]

@@SyntheticFuture nah, by then it will be forgotten and seem strange, just like the indian sound induced stuff 😂

[@antonfidd3795]

@@JB-fh1bb yeah,like those dinky little pyramids and monoliths all over the globe. lol. Maybe just a little different. no?

[@harlequinems]

Just give it to a flat-earther or area 51 fanatic now and watch the conspiracy theories fly 😂

[@Xenocrii]

I'm a simple man. I see gravity defying things. I enjoy. I like.

[@Raddish-m8o]

Literally couldn’t agree more😂

[@dondoTheMan]

Yes.

[@iliasgrigoriadis.]

Nora japan

[@stolearovigor281]

Gravity is a delusional theory

[@CornerTwisted-c4b]

Ÿëş

[@19squids81]

I can't believe how heat resistant that ceramic shell is. very cool process. and great video!! thanks for sharing!

[@BunkerSquirrel]

The layer lines showing up in the cast is not something I was expecting. Really a testament to how effective and precise your methods are. Well done!

[@Dinpuiasailo-fr6kh]

then go make your own

[@someguyontheinternet-]

​@@Dinpuiasailo-fr6kh What are you even talking about?

[@Grueneaxiom]

A NEW HAND TOUCHES THE BEACON

[@xs1l3n7x]

I started skyrim again yesterday!

[@Grueneaxiom]

@xs1l3n7x same!!

[@TimothyDeThaey]

Listen! Hear me and obey!

[@Grueneaxiom]

@@xs1l3n7x same!!

[@41KeplerB]

A foul darkness has seeped into my temple.

[@gordonmorrow4720]

I think we just witnessed a rather impressive collection of skills and imagination. Well done.

[@JayKay-d5p]

@@gordonmorrow4720 truly

[@MyFamilyDisownedMe]

Yeah

[@rogerd4559]

Today, a skilled craftsman like him is a rare and dying breed

[@ladyperson9462]

...and tools!

[@PsyoPhlux]

@@ladyperson9462 His video editing skills and body cam are just as impressive

[@Otabek.Abdulloh]

Wow you just did all of it for us thank you! Interesting video!!!

[@lamMeTV]

I love that you keep all the "repetitive" dialogue in the video. Makes brain feel good. The ceremic slurry, FUSED sillica sand, vitrify the shells, melt out the plastic etc. etc. My personal favorite are the Petrobond videos where you compact the sand and cut out a path for the metal to flow into

[@manitoba-op4jx]

the real value is anyone can just click on his video for the first time and not have to hunt down the names of products and tools

[@guser436]

First time seeing this channel so it's very nice

[@baomao7243]

The video has a slightly hypnotic, ASMR quality to it. Now make into a long loop where at the end you set down two copper icosahedrons right next to two you’re just starting…then loop the video. Make the run time total if, say, 60min. ✅ASMR-induced sleep: Mission accomplished !

[@jaydencrawford7054]

​@@manitoba-op4jx 😂

[@dougsbir]

Would it work using transparent aluminium?

[@rangerBlu]

The quality of your casting alone deserves a subscritption (and you'v earned mine). Well done!

[@Geda.gede.gada.gadaoo]

The exact reason why i subscribed as well

[@extremechimpout]

Best i've ever seen

[@Ottee2]

Just mad fabrication skills. Very impressive.

[@rogerd4559]

Glad you did. This man is a Genius amongst lazy fools

[@fruitgums]

You've

[@ericsoucie2865]

<a href="#" class="seekto" data-time="598">9:58</a> Attach a motor.

[@Tcsdoffical]

V8 motors with jets

[@BlackDeltaOne]

also attach some ball bearings

[@Drdemiurge]

Right

[@Drdemiurge]

@@BlackDeltaOneright?!

[@alexanderficken9354]

he did

[@TheOriginalMrGreen]

<a href="#" class="seekto" data-time="109">1:49</a> That was the ... only trades themed fondue montage I've ever seen. Well played (jazz and all)!

[@mixmeow]

Using a smaller ball and thinner copper structure would allow the ball to float longer. You and the audience would be able to see the interaction better, making it more satisfying and dramatic! Then, you may even be able to spin the copper at full speed with and motor or drill and get a fully centered ball!. I’d love to see this! Not to take away from this amazing video!!

[@johnpauly5524]

Thinking smaller lighter ball… maybe even hollow?

[@mixmeow]

@@johnpauly5524 - Yes, lighter ball, but since the ball is a magnet, I’m not sure it can be hollow. Does anyone know if this particular magnet can be made hollow? This could create a new generation of fidget toys!

[@trutwhut6550]

​@@mixmeow Maybe? Neodymium is basically charging metal to get magnetic effects but it'd probably reduce the magnetism.

[@mixmeow]

@@trutwhut6550 If it was possible, I’m thinking he’d eventually calculate and discover the magnets strength to weight ratio. If so, we’d have an awesome follow up video!

[@JacksonKillroy]

A smaller ball aka a baller. Get down to south central LA.

[@Rascal77s]

I think the coolest effect is remotely turning it with the 2nd magnet. If you made another stand with the 2nd magnet with a crank handle to turn it, and a housing for the 2nd magnet to hide it from view, it would be a fun trick when you tell people to turn it. Don't tell them ahead of time what is actually going on and it will trip people out.

[@SHADOW.GGG-]

gearbox drive,no touching parts?

[@SplatterEffectGaming]

It would be like magic! Lol! Of course, anything that someone doesn't know how it works could seem like magic too.

[@RydinSmith18]

I could trick my friend so good!😂

[@richarddunn588]

I believe you are really on to something hear try cooling it down and see what effect you can create. By looking at the replies you've gotten, you've got a good potential for brainstorming this concept, However do not listen to Most highly educated Individuals it'll just slow you down.

[@robspiess]

He could make a wooden base that contained a rotating magnet to "wirelessly" rotate the "sphere".

[@okolenmi7511]

<a href="#" class="seekto" data-time="706">11:46</a> - this is more interesting than floating sphere for me

[@sleeplessdev7204]

Agreed, I'm surprised the small magnet is able to rotate something so heavy from such a distance. I'd love to learn more about how that works!

[@sleeplessdev7204]

And will the small magnet still rotate the sphere if it doesn't have the spherical magnet inside?

[@DanielJacksonisbiggerinside]

​@@sleeplessdev7204the small magnet is acting on the large magnet, the copper sphere is only moving because it goes out of balance when the magnet moves.

[@ghost_ship_supreme]

Maybe it can be used for wireless mechanical gear?

[@doctoroctos]

Put it on a scale and spin it

[@KenanGiroux]

I truly love your videos and respect the hell out of the detail you put into them.

[@daveansell1970]

Because the sphere is polygonal magnetically the magnet will see a bumpy surface, the join line being down the middle will make it even worse because the magnet only 'sees' loops of copper as electromagnets, and the join line breaks lots of loops of copper which ought to be there. This will make the centrifugal force problem much worse as the magnet is being effectively grabbed by the bumps. I think you could get the effect you want by making the sphere out of a series of copper rings held together by something non conductive. That way the symmetry isn't broken and the ball should levitate smoothly.

[@andrewsteinhaus8267]

Bussard fusion

[@TheConspirateWarrior]

Yes, probably a non polygonal circular surface would work better ... Still, I'm positively impressed

[@ebaab9913]

I think you may be on to something here; but I see half (slightly less than) circles connected together in end caps with copper screws

[@purplebooger6410]

What if it was just a copper hollow sphere with holes drilled into it to see inside or slots cut out?!

[@bananabaton]

What if it was more like a tyre or just a ring?

[@MagikosEksMaikhina]

Very cool build and process! I also gotta give you props for the details you put into your sound design- most people won't notice it consciously, but you can feel it.

[@---do2qd]

I noticed this too, really well done.

[@mikecohoe3983]

I've never commented on a video before, So here goes. Firstly that copper sphere is really nice, well done. Now mount that circular magnet under a wooden table and attach it to a motor so that it's rotation reacts with the sphere on top of the table. That would look super COOL. 10 / 10 from me.

[@Bart-uo5xg]

U mean the cylindrical magnet? Yes, please. And how bout the cage sans spindle "walking" across the table?

[@louienoble4179]

frequency of green or opposite colour rotation wavelength

[@FozzieBrown]

So was this a trick video?

[@pacomoreno577]

​@@louienoble4179I don't think so. Just part of the routine in order to get an idea of a certain project that needs some figuring out like any other project. In other words, experimenting, which is a genius routine when figuring things out is at hand

[@exmcairgunner]

The idea with the motor will be perfect

[@Cameroony]

I think one of the coolest parts of your video is actually the casting method you used! I have never seen that before. It makes me want to try this!

[@ShadowMage3D]

It's called lost pla casting. I've seen it used a few times in videos

[@DJMetalstone]

I do feel you want to wear some kind of mask with fume protection. No experience on this here but I can imagine the molten plastic residue on the bottom would have produced like some toxic fumes burning to that I feel and it might still be lingering in there plenty when you open it up. Just trying to look out for preventing health issues that's all :)

[@prestonburton8504]

me as well!

[@ShadowMage3D]

@@DJMetalstone you should wear a mask when in the room with any 3d printer. They all give off fumes. But with burning off the pla, you're going to be doing that outdoors, anyway, unless you're crazy, so fumes will be less of an issue.

[@DJMetalstone]

@@ShadowMage3D well when he opened it up wouldn't the fumes get out right in your face ? Just wondering. Since it seems all is kinda trapped inside untill you open it up to keep the heat in. At least that's what it looked like.

[@AnoAssassin]

<a href="#" class="seekto" data-time="706">11:46</a> For me this remote rotation was easily the coolest part of this video and I'd like to see more of it, more talk about it, that's so rad

[@markthesharpener7028]

Its just friction/resistance. Hes flipping the poles so the other magnet flips to match and turns the copper

[@norbertwu8389]

maybe put the 2nd magnet on motor & see what happened next?

[@numbers93]

@@norbertwu8389I thought the same! A motor would make it easier to adjust the rpm to precisely what’s needed for the ball to float stably

[@thebusdriver_gaming]

<a href="#" class="seekto" data-time="610">10:10</a> you should program a motor and expiriment with different speeds to try and get the ball to stay in the center of the truncated icosahedron

[@Daniel57_]

I agree

[@boucheqifzoubir6431]

You are a genius my friend Good job

[@grandlotus1]

Normally, I am very impatient with KZbin videos - I'm a cut to the chase kind guy. THIS video is well worth watching from start to finish. Bravo!

[@OutlawTV89]

that thing doesn't defy gvavity - bcz there is no gvavity! In this Universe laws of Thermodynamics cannot be broken, its just how it is.

[@grandlotus1]

@@OutlawTV89 Good luck with defending your thesis.

[@OutlawTV89]

@@grandlotus1 I don't need to. Laws of theromodynamics are doing it for me. You cannot defy that. End of story

[@user-bc1dk5uz7z]

<a href="#" class="seekto" data-time="115">1:55</a> get out of my mind 😂

[@cyborgcoyote3251]

That's all kinds of cool, well done! Ideas: 1) Suspend the magnet in the middle of the sphere, then spin the outer sphere up with the drill before releasing it. Might get more levitation that way. 2) With the entire system spinning, hook up a voltmeter to the outer sphere and see what kind of voltage it generates. 3) Consume cookies.

[@calmonnier2512]

You might need to make the stand connector piece metal to have somewhere to connect but the voltmeter is such a good idea.

[@angelramirezisea]

#1 is what I was thinking: Point some air jets to the magnet to make it levitate and remove the initial friction between tha magnet and the cage.

[@SanctiFae]

Huge thank you, for making this video! My 50cents: Quench the copper to increase the electromagnetic conductivity, yes this will influence the total size and possibly shape of the sphere, I would suggest doing this in multiple 'soft' stages, where you raise the copper's temperature and then rapidly cool it across several slowly increasing increments to maintain structural symetry as much as possible. There seems to be a definite need to play with lighting and the coloring of the sphere to better showcase the events, I think it would definitely make it look more awesome. I'd love to see you use this sphere in a future video where you showcase some interactions with its unique shape and ferrofluid.

[@minhattran1127]

Bro creating the hex core💀

[@trevoncowen9198]

😂 made a a mega tron spark

[@fleshborg]

What if he can't keep the 2 hemispheres perfectly parallel?

[@ProwersEdits]

Arcane fan spotted

[@CYRUSMAXIMUS0000]

Totally hex tech will be next

[@John-ce6gt]

Victor nation how we feeling

[@jameslong9921]

When I worked in a foundry, casting art pieces in bronze via the lost wax method predominantly, we used a compressed air gun with a small jack hammer like fitting to press against the sprue and vibrate the silica shell off of the actual piece thereby saving it from damage, and I can confirm that large pieces of shell falling off was most satisfying, as well as revealing the treasure inside of course. Great to see you doing it in what is essentially a backyard operation. We were a relatively small company and also made a lot of our own equipment including our furnace made inside an old 64 gallon drum.

[@jkkarkar]

Rotating the copper sphere with the other magnet is something akin to a differential. Very cool.

[@rossbrumby1957]

Magnetic torque converter- could make one with variable magnetic proximity so as to be a clutch/torque converter in one. Good for a gokart.

[@gaersofwar]

A dutch company called Zytec makes an industrial coupling with a magnetic and a copper disk to make a coupling with no physical connection between the motor and the driven part.

[@SashaInTheCloud]

Don't show this to Dyson. We will end up with really odd vacuum cleaners labeled with pacemaker warnings.

[@ac1dnet]

man this is such an awesome video i almost never sub the first time i see a channel but this deserves it, im a third year physics major and i loved this.

[@popofouad]

Actually as it is have many holes , this really reduce eddy cuurent as resistance gets larger in the sphere thing and so the the magnet can not have the suspension force like in a solid cylinder so i think this is the most you can get out of it Also the split between the 2 Half's of the sphere reduce eddy current and increase resistivity as there is a layer of air between them ( even if they are touching it is higher resistant that the copper it self ) But awesome design non the less

[@jjones2582]

I wonder if "stripes" with a few supporting cross members instead of hexagons would have been better.

[@unknownxy8026]

@popofouad in my opinion the gab between the spheres reduces the current, maybe it would help, if he would use solder to close the gab (but you have to be careful, magnets doesn't realy like heat)

[@mduckernz]

@@unknownxy8026The sphere is not a magnet. It only becomes one momentarily, when a magnetic force changes within or around it. So it should be totally fine to solder it

[@PomlacAvdu]

I agree I think the split may be effecting it significantly, those two sides need to be brazed together

[@gearhead1302]

Best comment. The eddy's are being cut where they would naturally lie and it changes the properties. It need to be solid. Gonna have to look inside another way. At least you can hear if it's floating.

[@sambecker2045]

I've seen many videos. Your subject matter is impresive. You have mixed foundry with physics and video production all together with your own experience and interests. You have captured me as a follower.

[@TheGeorgee]

That's a very insightful comment. Thank you.

[@yoface2537]

<a href="#" class="seekto" data-time="398">6:38</a> those print lines were hilarious, made it look like you 3D printed copper

[@The_Govermnent]

Me omw to be a 2047 3d printed copper merchant called Ez Nazir

[@Y2KNW]

@@The_Govermnent (starts etching a complaint letter onto stone)

[@elephaux5671]

Shows how fine the resolution of the casting medium was!

[@3DPFactory1]

I love seeing 3DP being used in this type of application. Awesome work with the casting 👌

[@000Krim]

This really deserve a second part, the copper sphere is a cool project on its own

[@sambamuel]

WHAT IS THAT MELODY??!?!?!!

[@jackiesharp973]

Bro I was thinking of sigma from overwatch 2 also. My man. And also, an American cow hand! Has this dimension shifted time scales?

[@sambamuel]

@jackiesharp973 THE UNIVERSE, IT SINGS FOR ME!!!!!

[@jackiesharp973]

@@sambamuel reduce your expectations to zero

[@joshuadennis2931]

It's from dying light , if your asking about the sweet drum and bass beat

[@jackiesharp973]

@@joshuadennis2931 what are you talking about? We're talking about a game

[@JE-zl6uy]

Sigma from Overwatch: "That music.... it's playing again."

[@shao03-yt]

I was searching for a comment like this , and i wonder why you dont have that much like

[@Aether564]

het universum zingt voor mij

[@pacomoreno577]

​@@Aether564oh it does indeed. Im glad you guys are here by the way. I was beginning to think I was riding solo here

[@AJ_Steele]

Finally, my people! I’ve been searching for too long😂

[@vladimirpain3942]

This must be one of the coolest casts I've seen.

[@jester17282]

For the ceramic being as hard as it is, it seemed like you were just blowing away fluffy marshmallow with the sand blaster. That was very satisfying to watch.

[@rogerd4559]

Yes that puzzled me also. Ive used a sandblaster many times and never had it that powerful to blast through ceramic material like that

[@manyhammers5944]

I cut through basalt with coal slag in mine.

[@eefalzer]

Idea: Get a motor you can precisely tune the rotation speed, and a strobe light triggering every 72° of the shaft rotation.

[@evanmayer744]

You, sir, have cracked the algorithm.

[@Serbianguy432]

A brilliant and entertaining piece. I defy anyone who starts watching this video to look away - you simply cannot. As soon as the video started I was on the edge of my seat waiting to see what would happen. As usual, the videography, lighting, editing, and narration were superb. It is always such a pleasure to sit down and spend a few minutes watching a true artist work. Bravo.

[@rogerd4559]

A true artist amongst all the other you-tube jerks

[@sethherrin45]

<a href="#" class="seekto" data-time="531">8:51</a> ANOTHER HAND TOUCHES THE BEACON!!!

[@bobbyhumphrey199]

Perhaps with this magnetic wizardry we can make a dawnbreaker replica

[@garykooienga9990]

Ever closer to the center of the circle.

[@garykooienga9990]

Ever closer to the center of the circle.

[@perishmortal665]

YES

[@ryanw1511]

Lol

[@calinfx270]

When sandblasting away the ceramic cones that lead to the sphere, if you blast them in a spiral you could get nice ceramic lamp pieces, candleholders and so on. Cones and cylinders lend themselves to very nice spiral making

[@rogerd4559]

the possibilities are endless

[@JohnPick-i1y]

Hope you can demostrat that the series found in Roman artifact aare actually wood fired heaters small twigs rock slab base rock surround as heat sink very little smoke vidio please

[@gregorycoleman2149]

I'm kind of blown away at how good that casting turned out!

[@momomunsta8887]

I love that you can see the layer lines in the copper

[@Tao_Tology]

_on_ the copper

[@smichal52]

<a href="#" class="seekto" data-time="194">3:14</a> Broly is that you? :D

[@ErikAranda-c2n]

broly:AAAAAAAAAAAAAÀAAAAAAAAAAHHHHHHHHHHHH

[@infinityzer054]

IT IS INFUsed!!! WITH *COPPAAAHH!!* (Anti-scratch technology, and vibranium rings!)

[@bopakboom2819]

smarty pants

[@candiahorsley3411]

among us

[@Crabcrabcrabcrabcrabcrabcrab]

BROLY IS MADE OUT OF COPPER?!

[@craigmonteforte6111]

WOW those Castings did come out great !

[@joshuamount5832]

That is one of my favorite songs! Great job on your project!

[@AllyAna-rv4nj]

Okaruunn , your other one is here

[@miya6472]

lol did not expect a dandadan reference here

[@morozka4534]

I did

[@alite_2200]

@@morozka4534 same

[@FALKONDX]

only enter to search this comment, i leave in peace xD

[@evanplanas7505]

I like the Idea that a Hotline Miami type soundtrack is always playing INSIDE your sand blaster. 😂

[@Gortall]

More Cyberpunk I'd say. 🤔

[@aljazslemc9569]

​@Gortall yeah, that sand blaster is stuck on the cyberpunk start screen 😂

[@adrasx6999]

I haven't seen a cast look as good as this. That ceramic and sandblastic really did the trick

[@BetterThanYou-3.2.1go]

Wow. This is amazing. A new subscribers right here 💥

[@wa4aos]

YT just served your channel to me for the first time, as far as I know. As an electrical engineer, this was very interesting to watch and learn from. Thanks !! and yes, I am subscribing !

[@PlayNowWorkLater]

That is one of the coolest projects I’ve seen on KZbin. Nice job!

[@rainerzufall1337]

<a href="#" class="seekto" data-time="458">7:38</a> you can build a Nunchaku out of these - Copper BruceLee 😀

[@jamilateef6392]

1972 end of life

[@BlueBlaze_Offical]

or keep them and recycle for another time copper is used!

[@Chickenguy24]

It is a good idea personally I would do it but I don’t have all the equipment

[@jjtheherald008]

Way cooler than the politic videos I watch. Back to those now.

[@MartinTedder]

I'm trying to imagine how far we as a species would have become if all videos on KZbin were like this instead of what it is now. It shows curiosity, experimentation and result. Everyone who saw this is a better person because of it.

[@dbzkings2626]

You also have to think it was playing with his dogs' toy that gave him the idea. The best ideas come from the strangest places.

[@rogerd4559]

Im glad to see something other than another free energy machine

[@SarcastSempervirens]

This is extremely cool! I adore passion projects like this, going to all the trouble just to glimpse a few seconds of something you predicted could happen. Worth it! Subbed.

[@crescentfade]

Okay, so the making of the sphere was so very satisfying. Well done.

[@JaimeFerreira44]

this is one of those that you enjoy the ride, not the destination, thank you.

[@sigisalmen2399]

Use a in frequency adjustable stroboscope light in complete darkness while it's rotating. That brings the copper sphere to "stop". Not only for the camera but also for your eyes. Great project, thanks 👍🏻

[@souljaboy.6668]

he needs to just use a laser pointer and hook it up to a steady programable motor

[@Chromevulcan]

@<a href="#" class="seekto" data-time="265">4:25</a> You said, "Fortunately, most of the time it does (work out)." There's nothing fortunate about it. It's due to your meticulous planning and execution that it all goes well. It's one of the things that I appreciate about your channel.

[@Michael-bn1oi]

It's a simple turn of phrase

[@AllenKnutson]

Visionary stuff man. Great to see the mix of 3d printing and ceramic preliminaries. 1) Make the interior of the truncated dodecahedron spherical rather than polyhedral. That is, start with a sphere and poke nice holes in it. 2) Once you have a better setup with the drill spinner, match the rotation to the shutter speed so the cage isn't visibly rotating.

[@seasicksinbad]

I do metal casting also and I agree when you say that after all the prep work, the metal casting itself is anticlimactic. Great vid by the way, I enjoyed every second of it.

[@warrendarress6901]

Amazing craftmanship and patience!

[@johnhammonnull1357]

Bro. Watching Dan da dan then seeing your thumbnail. It's too much 😂. Great video!!

[@glitchergames]

I actually binged the show in a day

[@RyanMercer]

Ed Rooney : "Nine times."

[@JoshuaDavies04]

Nine times?

[@setitheyeti]

Nine times

[@Jacktheman5829]

Nine times

[@wiesejay]

Lol, I thought the same thing

[@RyanMercer]

@@wiesejay 😂

[@JohnW.Koehler-q6r]

You make learning so fun, it’s hard not to watch more videos!

[@fusola9612]

Dude just randomly designing Satisfactory-Warp Core... thingy sh*t...

[@rogerd4559]

that sphere will take you to where no man has gone before

[@LoudenGriffin]

So many people are saying to use a motor while here it is he is using a drill <a href="#" class="seekto" data-time="632">10:32</a>

[@casper6014]

A drill is just a motor designed to drill/screw

[@timothinking9855]

A motor will hold it at a consistent speed.

[@benevolentdictator2315]

I so wish my brain could be this creative, precise and accurate

[@KlutchGawd]

Cool! You're full of good ideas! Keep the creativity coming!

[@torana6531]

You just invented a UFO engine

[@LukesterGD]

He did! 😂😂😂

[@Pickle_guy-74]

Wdym

[@LukesterGD]

@@Pickle_guy-74 It’s a joke. The joke is that it looks like something out of an alien movie.

[@nicholauscrawford7903]

Like the engine of the Event Horizon, maybe?

[@jcklsldr]

You mean discovered induction? The idea that powers most of the world? 😂

[@ahobimo732]

That copper isocosawhateveritscalled is freaking gorgeous! Beautiful work. Also, your tool collection kills me with envy.

[@glen1arthur]

@@ahobimo732 his skill also.

[@removechan10298]

<a href="#" class="seekto" data-time="370">6:10</a> satisfying

[@AbenezerTemesgen-w7m]

Really a very very good Idea!!! I never seen like this.

[@alexbotner4656]

Every aspect of this project is wonderfully satisfying

[@noobertplaying2395]

<a href="#" class="seekto" data-time="698">11:38</a> How about give it some gears? It might fasten the spins, plus. the drill is noisy and might as well made the holes a bit smaller

[@nickbrunelle2472]

The magnet might float better if the two halves had a more ideal electrical connection. The eddie currents are probaly being interrupted at the seam. Maybe some more filing or you could TIG weld them together. This is really cool reguardless.

[@KafshakTashtak]

I thought about him welding or brazing them. The problem is that the heat will spread quickly through the copper, and that might anneal the magnet.

[@whome9842]

@@KafshakTashtak Some conductive putty might help increasing the contact area.

[@HarveyJay-qw2gk]

@@KafshakTashtak Use regular solder or silver solder, lower temp than brazing or welding. if the seams are tinned before soldering it will go quicker with less chance of major heat adsorption.

[@rogerd4559]

Would it help to solder the two half's together?

[@TheTexacon]

Keep digging my friend, you could hit bedrock and bottom out on truth that haters cannot deny, be undeniable my friend. It is a pleasure watching your process. Skillz

[@chris_blake83]

Noticed when you were trying to get a better camera angle that the axis was a copper tube. Not sure how practical or if possible but it would be good to have an endoscope camera within the axis tube to get the internal view when it’s rotating.

[@rogerd4559]

what if you had an endless copper tube with that ball in it? Would the ball stay perpetually suspended?

[@SameAsAnyOtherStranger]

Kinda cool when a channel I've been following out of interest in metal casting commits to building an experiment that attempts to demonstrate a physics principal.

[@-RedSerpent-]

Make a base with a rotating magnet (hidden) at the right speed so the chamber spins with nothing connected to it, with a floating ball inside. I think that would look really cool.

[@liamspence9763]

Setting up a motor with a stroboscope synced up to show a consistent window into the sphere would be really sick, love this design

[@6Twisted]

<a href="#" class="seekto" data-time="28">0:28</a> does that make contactless bearings possible? What's the drag like?

[@bread6957]

I think bro is onto something

[@Everfalling]

No because the eddy currents generate heat in the metal.

[@Andrew-vr5bb]

Would probably melt itself if it went too fast

[@bread6957]

@@Andrew-vr5bb just don't go too fast

[@mduckernz]

Contactless, yes, drag-less - no. Magnetic bearings already exist, this is just a derivative of one

[@chrisbrown4295]

Try freezing the magnet. Reduce the magnet size about 1/3. Fill the holes with copper plugs, every other one, gradually take out one at time, spin, see if fully covering the sphere increases resistance.

[@arturcarrondo7196]

Looks like sigma's balls from overwatch 😭😭

[@Qrook]

sigma balls

[@novusparadium9430]

"Gravity is a harness"

[@_FELIPEPOLLO_]

Sigma balls?

[@steviesmart2343]

How about having magnets around it to generate electricity - hook up to a flowing water source? Man you are a genius. I love the way you think and how you are able to come to this point. Excellent.

[@omartechnologies]

beautiful casting - like you said, on its own it's just beautiful !