44MPH On A Jon Boat!!!!!

[@christopherlyons6438]

The most impressive thing is how well that 90 pushed the weight of this dudes massive balls.

[@Huntersprojects]

Seriously though that’s crazy!

[@udmbfckx2916]

And these are the kind of videos that we love in youtube....

[@bottycarmods]

that boat looks like its gonna fall apart i love it!!!

[@strongdelusion9442]

He did have 2 vests on and a helmet right? lol.

[@lancerobb4480]

In the early 1970's this was fairly common, someone's would bolt a 100 plus horsepower motor on a jon boat and fly, and that was the first fast bass boats. A lot of times they would bolt a piece of aluminum to the back of the transom to strengthen it then add a couple of 2x dimensional lengthwise, and secure to the ribs and then bolt the motor up as high as far as possible and this was the first jack plate. You had to have a bud and a big cooler up front to keep the nose down as the boats were usually just fourteen to sixteen foot. They would run those old two blade brass or bronze props designed for hydroplanes quite often and they would shine that bronze with basso until the Prop looked like black hills gold. Every boat was raw white , green or aluminum. Things were simple in those days and anyone could afford to go fast. The ladies didn't expect a man to have a 50k boat and a 50k truck as there were lots of old Chevy, Ford and Dodge step side trucks running around and they would have the wood floor beds stained like fine furniture with a thumpy idle. Girls used to look at what a man could fashion with his hands out of nothing. One guy would paint another would be a mechanic and another would pinstripe and some would upholster and the ladies did that too. Tires were usually bias for trucks and a radio, well a nice one was AM- FM 8 trac Craig and they sold those at Otasco or Western Auto. Now it's just more money and that's greed.

[@gabrielb2598]

I had a 15 hp mercury on an empty 13 ft aluminum v bottom boat and that was freaking scary. You’re brave. 👏

[@gameland456]

Im 16. I got a 15hp on a 11ft Tinny not crazy enough. Putting a 75hp on 14ft tinny haha

[@josecorujo4148]

Man I bet you had a smile on your face the whole time I love tillers.

[@cambridgepropertymanagemen7612]

I love how this guy has no fear of absolutely spilling this boat and losing his stuff 😂

[@RichieRouge206]

Hilarious. I remember as a kid we put a 15hp Johnson on a small Jonboat with a max 4hp rating and that flew 😂

[@floridamansgarage8629]

RichieT5 🤣I did the same thing a 15on a 10ft jonboat and it was insane! Soo much torque I’m just 16

[@lastaccountbannedfortalkin1449]

Could modify old 2smoker jonnyRudes to 20+hp that engine was actually the 9.9 with a bigger carb so 1000more rpm. You can get the older jonnyrudes to holeshot like f$%k with coil,ht and plug mods

[@MountainManKm]

@Quirin M. thats insane! I just finished restoring a 88 rm250 but my next project is i want to build a small boat that hauls ass. idk what i could get out of a 8ft jon boat with a 15hp 2 stroke, its maxed rated for 5 but with what ur talking about that is amazing. im 20 years old teaching my self about engines and the physic of speed and racing. if you have any more 2 sense or some more detail on your experince id love to hear it thanks!

[@airlesscanvas2887]

I have a 9.9 on my 12 ft Jon boat. with 2 people and gear it goes a nice 22 mph. im guessing with just me it'd be about 26 mph no gear just with my 120 lb skinny ass

[@Kana0211]

I put a 8hp on a 8ft dinghy. Literally flies

[@thefireduppatriot5288]

Dude Eric, I've been a fan for awhile. But this make you my hero! Much repect. So rad. The 90 sounded so good it can't be described. Love it!

[@DavidNoog]

It's really nice how they have complementary hoses for flushes out on the docks. Gets rid of the salt in the cooling system as fast as possible. I wish we had those down in the docks of NC.

[@danielscott9769]

Used to fish with a buddy that had a 115 Evinrude on a 15' Bumble Bee. You could feel the boat come out of the water and kick a little to the right. Had to be doing around 55 to 60. Doing 50 in a Jon boat and catch a 15 mph head wind gust would certainly create dirty diaper situation.

[@bowswell9053]

Nice runs there, still looks manageable - good length on the boat and nice to have that long tiller! That motor sounds great - nice to hear a two stroke again.

[@CooterTravenport]

It’s hittin rev limiter needs more prop. That boat should 50+ with that motor

[@brandonsyatessr.3667]

More pitch bad

[@CooterTravenport]

Brandon S Yates Sr. More pitch will give you more speed at the same rpm because the blade travels a farther distance through the water than a lower pitch prop. You add pitch until you run almost redline without hitting rev limiter. I lake test boats almost everyday at the dealer I work at

[@CooterTravenport]

super pickle that’s how we set em up at the dealer I work at. Add pitch until it don’t hit the limiter anymore and you will get the top speed and a good hole shot out of it

[@EDCandLace]

Two issues first is as said already your way under proped at that weight/load... And your running way to wet... 4 or 5 degrees of positive trim and you will be really quick... It's super under propped tho as you are on the limiter even pushing that much water so it would carry weight really well. Prop pitch increase and properly trimmed it will run low 50s. If you are taking out 2 people plus your self and gear I would leave it as it is because it will carry the weight with very little loss in speed.... With 2 more people in the boat and some trim to get some boat out the water and i bet it would still run 41-42... It's always nice to have the prop to carry weight.. It really sucks when your boat is propped for a lighter load and then you load it down and just getting the hull to lift takes forever and you can't get any rpm... On our bass boats we always prop to carry two people a full gear load out and full live well and fuel.. It cost or 5 to 7mph on the absolute top when it's just one person, empty live wells, 1/4th tank of fuel and not much gear BUT it's always nice knowing that I have a prop that will respond quickly when the water vets big and blow out is unlikely when trimmed down and running tight creeks (high pitched props do not like pushing water when you bury the trim and the boats super wet... They only perform when your padded out and wot)... I may leave it as it is if it was me so i could carry people and gear really well...but if your looking for speed you need pitch and trim again its on the limiter anyhow but your running super wet... If you get the boat out the water some the ride will be far better at the back of the boat as well.... In this video it looks like you need about 3 to 4 degrees trim up based on how much hull is in the water at wot.

[@strongdelusion9442]

lol

[@peteramberley9952]

I can see you flipping that flat bottom boat in to a headwind

[@brandonlaragirl]

I wouldn't be going that fast on one of those 😂

[@MrDavidelliottjr]

Takes balls to be a man

[@cambridgepropertymanagemen7612]

I wouldn’t go that fast on a jon boat but to each their own. I can’t afford a motor like that to begin with anything more than a 20 is too expensive

[@khuff308h5]

@@MrDavidelliottjr takes balls to be stupid you mean!! Lol

[@jenn86179]

Eulogy: His balls... Solid brass! Father, husband, son and adventurer... he will be missed. Love it man! Looks like too much fun

[@steveng.c.8524]

Dude, have u upgraded your life insurance?😂

[@davecfishing7907]

For real lol gotta strap it down

[@bcroft68bc]

Bubba Wayne 😂

[@jasonhines9138]

Is that a 90

[@jasonhines9138]

Dave C fuck you

[@traveler7044]

Haha haha I died

[@paulmarynissen]

How’d you get it to go that fast with it weighed down by your solid steel cajones?

[@wildman4642]

That poor trolling motor...

[@EV1NRUDE]

It needs to suffer, GAS FOR LIFE GET RID OF THESE 4 STROKES AND E MOTORS

[@zamn__]

@@EV1NRUDE yeah right

[@EV1NRUDE]

Homeless bass tester Ur name is awesome dude.( If its not serious)😳

[@zamn__]

@@EV1NRUDE thanks. I made it up and isn't serious 😂

[@EV1NRUDE]

Homeless bass tester ok, good.

[@massimofesi9926]

Run in shallow sandy bottoms is the best way to logorate water pump.

[@prestonmcdowell1351]

And he’s a boat mechanic so!!!

[@mrGW]

@@prestonmcdowell1351 so?

[@prestonmcdowell1351]

@@mrGW what ever he breaks to have fun he can and will fix

[@hjc5458]

That thing should be in the 50s. Trim the mtr up and raise the mtr so your propshaft is in line with the bottom of the hull. And get a more aggressive prop.

[@headlesnorseman701]

thats what i was thinking. this boat should be able to go 40 with half the HP. def needs more prop lol

[@internetgangster2570]

dude a 40hp should push this boat the same mph

[@paladain55]

@@internetgangster2570 not even close. Unless its built.

[@roccoseals7753]

@@paladain55 he went 37 with a 40 on the same boat

[@sethh1577]

Get a more pitched prop to

[@johncuervo3019]

You need to change the propeller to one that will get the engine to turn its max rated rpm. I feel like you could do 55 with that boat and engine if the boat holds up

[@strongdelusion9442]

That is the funniest thing I've seen on KZbin in a while! "I have to sit on the bottom cause I thought I was going to fall out" No shite lol!

[@ke3552]

Engine RPMs? Prop specs? Different trim angles applied? Nice work, subbed.

[@chadjohnson5917]

What size boat is this...16 or 18 footer? Where is your life vest????

[@michaelwilliamson3449]

+

[@SuperChiefer84]

My heavier 16ft Hewes Bayfisher runs 42mph with the same motor. Yours should hit 50 easy setup right.

[@floridamansgarage8629]

How is that transom handling that that’s crazy!

[@wardhively9594]

If you look at CFR 183 the calculation for that boat supports a 110 HP remote steer, so contrary to public opinion it isn’t the lack of strength in the transom that drives the max HP rating of a boat. But the tiller handle isn’t a great idea with that much Hp, thankfully the handle is long!

[@curtkramer5154]

Farm truck sleeper boat edition

[@fellovercliff4525]

Wonder how long the transom will hold together.

[@codygardner8625]

Hardest part of finding one with a tiller handle

[@sethh1577]

Cody Gardner hr installed it

[@brianmurphy1000]

@@blankaffinity most are helm control because of the size

[@floridamansgarage8629]

how is that possible i thought that transom was gonna rip right out what did you do to the transom to be able to handle that!?!? i really want to do that

[@stefanclaassen3965]

Very nice what a rocket !! could you please let me know where I can buy a tiller for my 70 ?

[@dannyb6968]

I am wanting to see, where is there a boat ramp with a flush out garden hose right there available?? PLEASE??

[@CaptJug]

I have a 1436 with a 30hp and a OTF jack plate and run 42. If you get a 3 blade with a little more pitch I guarantee you’ll run about 55-60 before you flip

[@cdp50359]

I'd try a higher pitched prop to see what it would do. Sound like the rpms was really high

[@pf465]

I wouldn't want to go much faster than that in that boat. Great video dude, and nice day to be on the water.

[@oneangrycanadian6205]

Hey man make sure the teather is on lmao I actually had to pick a guy out of the water then stop his boat that was doing crickets lol

[@jpascaln]

Good video. I have a 1436 with a Johnson 33 both from the 1960s. Old school but a blast to run.

[@knightcustombuilds6988]

M50D tohatsu on a 14' star Craft, this boat is crazy quick. Crazy the torque its got, it sticks that boat on plane almost instantly. But the weight of the motor compared to hp seems a little off. Wish it was a little lighter. Y'all stay safe and keep boating!

[@MagnusDominus1]

Beating the rivets out of it, LOL. How long and wide is the boat?

[@AimForTheBushes908]

How easily would the boat flip if he hits a head wind?

[@peytondavidson2737]

If you want more speed try trimming it up some not to wear it blows out but if you trim it up some where the prop don’t have as much drag in the water it will allow the prop to spin faster there for the boat will run faster

[@MrDavidelliottjr]

I would have so much fun in this boat. Love it.

[@Bobbyl007]

I like it. Seems like it should be faster. I've got a similar 16' jon that has done 46.2 on 2 occasions and I'm only running a 50 on a jack plate. On glass I'd only get 40, but with some chop it picks up a little more. Could be weight distribution and trim is affecting your speed. I'm running console steer a little further forward.

[@seththemessenger5125]

all he needs is a more pitched prop he’d be going 60, the motor is at max rpm

[@kjruff7786]

Need a more aggressive prop that thing would probably need something custom to get best performance out of that little boat.

[@cncmoldsnstuff4423]

@@kjruff7786 I've found if you look around some of the smaller prop companies have some amazing props. I've found taller pitch props for the 50 I run on my jon boat, and they aren't any more expensive than quality stainless prop from a more familiar name. Oops. Wrong channel name. Still 5 Minutes On The Water here.

[@raymondsimpson7433]

I had a 16' alumacraft with a 98 40hp Johnson that would go 46 mph and that boat was a lot heavier than what you got, check the prop to see if it's the right size or you could have a spun rubber bushing on the prop that's a bad ads motor and in good looking shape

[@nascarstinks]

One of the best videos I’ve seen in a while! Highly entertaining with the shore runs😂

[@connorridgeway3090]

Do you ever have a problem breaking wake with that boat or breaking bigger boats wake?

[@simiaoreis318]

Hi dude! What is the name of the pieces that you used to calibrate up over the water your 90 Hp engine?

[@gradydockery8938]

my 25 suzuki dt25 is jacked plated and i got it on an old tub like this one your running and i get 38....come on down to the sabine river and watch them hit the mid 60s in a 40hp merc

[@justinposley681]

right

[@ramblinreelstv2335]

Nuts, I love it. I thought I was crazy for looking for a 30 horse to put on my 12 footer

[@stevehughes7341]

Where are you located? fresh or salt water...or brackish?

[@thomassodomizer764]

90HP on a Jon boat.. Boy you asking for trouble. Better hope the coast guard don't pull you over.

[@BanjoeTraveler]

They'd have to catch him, hot pursuit on a jon boat 🤣

[@sethh1577]

He could outrun them

[@cambridgepropertymanagemen7612]

All he’s gotta do is open up the throttle and then find water shallow enough where the coast guard boat won’t go and he’s set

[@duckco1]

Coast guard cant do anything to him even if they did catch him

[@jordanhicks5131]

Coasties are a bunch of jumped up rent-a-cops, they cant do shit and you dont have to stop for em

[@MattsShop]

Lol is that transom rated for that HP?

[@tomearly111]

I used to run 45 mph all day long with my 13' Boston Whaler and a Johnson 50 hp. 2 stroke. I would think you could do much faster with a 90 on that light boat.

[@mcciaccio]

key word.. Boston Whaler !

[@tomearly111]

@@mcciaccio Yes but it was probably 3 times heavier than this boat.

[@tomearly111]

Looking at the hole shot of that boat, very quick, makes me think he has the wrong prop for his application. It's like running your car in first gear. I bet with the correct prop you could get over 55 mph although I don't think I would want to do that in that boat. The 13' Whaler was rated for a 45 hp. motor but if you ordered the special transom you could put a 50 on it. Mine had that and a 50 Hp. Evinrude 2 stroke. It felt like you were flying at 45 MPH. I can't even imagine how fast it would go with a 90.

[@mcciaccio]

Probably needs a different prop. also those flat bottom j. boats have lots of surface surface drag.

[@joeywells637]

I've got a 14" flat bottom with a 60hp Evinrude that will do 48 mph flat out with 2 people loaded with tackle. It does not do high speed turns!

[@1finebattle]

Where can I get a 90 horse engine like that with the controls? I don’t care if it’s two cycle that thing is bad ass

[@billthompson3833]

This motor on the right boat set up correctly with right prop will run 70 gps.they made the 90 two strokes 3 and 4 cylinders. This one is a 3 cylinder which will run 70mph gps on a allison or other fast hull boats.

[@williamweirjr9749]

That's a cool jack plate would you let me know where to get that type ?!

[@mr.crowleydaslappa3980]

Only lower unit leak and gas leak on motor at connection any ideas

[@levicradit5014]

I've been seeing alot of comments saying "it should be faster I go that fast with a 50 horse.". Some people need to realize that when a boat is light enough. Eventually the motor is spinning full speed because there isn't enough resistance to keep it accelerating with that setup I'd say put a 4 blade with a steeper pitch on it

[@Financialturmoilexplained]

dont u worry about air getting under the bow and flipping it ,back end is heavy and no weight in front

[@Guerrilla727]

Is that bay pines right by John's pass? I forget the name of that little boat ramp because I usually put in at maximo park.

[@Abcd12345769]

Hi , what is the app you are using on your phone to check the speed u there doing

[@jaydenton5512]

Do you sell these motors.. how do you get with you about buying one..

[@coreyargrett4929]

I have a 2stroke 60hp Yamaha on a 17ft g3 aluminum boat what stainless steel prop would you purchase I have a 13 1/4x17 on now it picked up but wot throttle it’s turning over 5500 rpm which is to much your thoughts

[@ChuckNorris01]

That dock has water flush availability?

[@robertmyers4155]

I wonder where he gotten the Jack plate for the transom?

[@marvicty]

Just out of curiosity, what is the length and width of that Jon Boat?. I currently have a 20hp Mariner on my Jon Boat and I was thinking of mounting a 65hp Mercury on it.

[@boatdr.t5737]

I'm sure the coast guard sticker doesn't say 90 hp. Hope no one does!!

[@ComputerGuyAndy]

Nice video and you're lucky. All it takes is to hit one sand bar or piece of floating debris and you'll go from a KZbin video to a channel 2 news story overnight.

[@jordanhicks5131]

Then dont hit sandbars like a dingus

[@ComputerGuyAndy]

@@jordanhicks5131 My friend hit a submerged refrigerator, only one corner was bobbing and they never saw it.

[@theodorejohnkaczynski9442]

Does anyone know the ballpark price to build one of these? I know absolutely nothing about boats

[@lbbradley55]

You need to get a Prop Shop to Dial you in a Good Three or Two Blade 24 pitch Prop & Then you be able to run with the BIG DOG'S

[@davedodge7761]

By the time he got a 24 pitch Goin id b gone

[@lbbradley55]

@@davedodge7761 HA... HA... YEA 24 would skip a bit first But if he gets it hooked up he may catch up.?

[@ct1762]

@@lbbradley55 no he didn't say chopper, a regular fishing 24'' would hook up just fine

[@ct1762]

@@lbbradley55 you said " 24 would skip a bit first But if he gets it hooked up he may catch up.?" which made me think you meant cavitation. a surfacing prop always cavitates to spin it up faster (exhaust exits the sides of the prop, not through it like a normal one unless it's vented) then grips like a second gear once on plane. What did you mean by "skip a bit" out of curiosity?

[@lbbradley55]

@@ct1762 Ah.. yea Especially when they have a lot of pitch. Wasn't sure what that was in reference to. I see Gheenoe going faster than that...! Lol

[@LuisRodriguez-ry8oy]

Savage I can Imagine the feeling flying by other boats lol good job .

[@gregoryjamesaustin]

I would say that 90 is the right motor for your boat. Runs like a tiller bass boat in a tournament.

[@bboutdoors4506]

All you need to do is trim up get the boat out of the water. All you should be able to see is the prop in the water boat should be out. Mid 50s easy if set up right. Looks really fun I'd love to have one like that.

[@jordanlittle5391]

put the other 90 on as well

[@jerrylittle8922]

Dangerous

[@Mr.Spectaculous]

I launch at that ramp twice a week in a tan Gheenoe. If we ever meet be sure to say hi. That motor sounds ferocious.

[@adambillings2785]

That awesome! What app was you using please?

[@thomaslindroos1667]

How isnt it faster? Is it because the flat bottom and or wrong prop

[@assocrec]

Wild man!!!!!45 in a Jon is flying

[@GuillermoGonzalez-tn6xe]

Hola me interesa saber cual es la aplicacion que tienes para medir la velocidad GRACIAS desde argentina

[@caseyturner8773]

Awesome. It's a sleeper boat. How would you like to get passed by a damn Jon boat? Love it great video.

[@axeman6560]

Hauling ass, well done. Love a fast small boat!

[@brandonwalston9638]

Is there another sub floor in the boat

[@chpr1318]

Heck my 18 foot johnboat has a 55 on it and it goes at least 40 mph. The last boat went 57 mile an hour it was a 16 footer v bottom 1987

[@GPOldMarineShop]

Sell that 90 and put a 25HP on it and live long,LOLL! Glenn P.

[@DavidS19551]

This is insane..I bet your arm feels like you have been working a chainsaw..don't let air get under that boat!!!lol

[@КотКотов-щ8ц]

Привет!!! А подскажи какой винт стоит на моторе? Модель и размеры

[@jpdebruyn5811]

Very nice but way do you not have the kill switch on your arm

[@jaguilar1799]

Hey is it normal for my outboard to throw a lil bit of stem every once in a while? I just replaced my impeller as well.

[@balla014]

What you don’t use the power lift?

[@crazedpaul9836]

emmmm Baypines area st pete???

[@hmandeelful]

The whole thing could go air born in a head wind, your prop pitch could make it go faster .. life jacket is a must.

[@TexasBoy15]

What’s a good jack plate I have a 90hp Mercury on a tracker grizzly ? Need help

[@danielb.9355]

What size prop was that in the video?

[@roberttalmage4517]

Have you tried to tilt the motor up a little while running to get the rpms up and higher speed

[@firebrand07]

Who needs a flashy pro level bass boat? Or a cup of coffee when you have that.

[@hoosiercat1757]

what app is that on your phone???

[@garynewman4908]

Do sell your motors I'm guessing you do?

[@seabear2494]

Shouldn’t you be able to go a lot faster..? 45 mph for 90hp on a boat that weighs nothing seems kinda slow to me but then again I don’t know a whole lot about boating

[@ZulkSOD]

45 is pretty fast for any boat lol

[@internetgangster2570]

@@ZulkSOD not with the weight of that boat and hp that is slow for what it could be running

[@dreamdiction]

He doesn't understand the relationship between prop pitch and revs. If you put a 1:1 gear on that motor, he would do 75mph.

[@jacklowe3788]

It's not a weight / thing - Can't make Jon boat go but so fast & for why - for all these views & comments that's why- When I was kid I use to do stuff like that in the Keys after flipping couple, leaving the boat bleeding few time & just lucky not to have drown -I made it to 30yrs old- Now 60yr old & oh well like me had to learn everything the hard way - Well it's fun when u young but you flip it at that speed or any speed, shear transom bolt or just plain wipe out you probably get mention on 6:00 news- But I'm sure you know this & it give other youth crazy ideas- Runner till she blows Mate!

[@REDCAT1999]

Is that an app you using for speed if so what one

[@TheSoloAsylum]

You need way more prop on that motor...it tachs out easy so it will go a lot faster....