$45 Amazon PCP Hand Pump Vs $240 FX & $225 Airforce Pumps - Shooting & Refilling Test + Review!

Shooting and filling the Diana Stormrider with all 3 pumps (Orcair/FX/Airforce) to see which is most efficient. Then we look at the features of each.
❗💸💸💸 My channel is NON-MONETIZED, meaning no commercials for you, but zero income for me! If you're feeling generous, donations are accepted via Paypal (Friends/Family) here 👉 www.paypal.me/... 💸💸💸❗
⬇️ ⬇️ ⬇️ LINKS ⬇️ ⬇️ ⬇️ (Buying thru these help the channel!!)
$45 Hand Pump: amzn.to/3z8WIFe
Or get it from Vevor (same pump) if you don't use Amazon: s.vevor.com/bf...
The Four Uncles hand pump is a few bucks more, similar, but super highly rated: amzn.to/4iQkuYv
Airforce Hand Pump (Most sturdy): amzn.to/3NdWXBn
Cheap Moisture filter (You really should have one): amzn.to/3rcFMK2
Want a low-cost but great compressor instead? amzn.to/3DycJ9F
This compressor here is a bit more $$, but is a WORKHORSE: amzn.to/3WZORAX
Check out the best airgun shop around, High Pressure Pneumatics at www.myhighpressureair.com/?aff=2
🎯 🎯 🎯 Tell them Air Shootist sent you! 🎯 🎯 🎯
-------------------------------------------------------------------------------------------------------
🚨🚨HELP THE CHANNEL🚨🚨 by shopping on Amazon! Just click in via this landing page and do your shopping from there! Helps the channel and will not cost you a penny more! Thanks in advance!!!
amzn.to/3gLVpD2
OR check out my new Amazon page where I have lists of cool stuff! www.amazon.com...
------------------------------------------------------------------------------------------------------
Feeling generous? Want to support my non-monetized channel? www.buymeacoff...
Pyramyd Air affiliate link (landing page):
www.pyramydair...
Buy a Diana Stormrider rifle here:
www.anrdoezrs....
-- Other Stuff --
Heated Shooting shack and other Vevor stuff:
VEVOR 8x14x7.6ft Shed: s.vevor.com/bf...
VEVOR Diesel heater: s.vevor.com/bf...
VEVOR 4500psi orange compressor: s.vevor.com/bf...
VEVOR Smaller, budget-minded blue compressor: s.vevor.com/bf...
VEVOR Heavy duty 30A extension cord: s.vevor.com/bf...
Discount code! VVSALE5 (5% off)
12V Power supply for Diesel Heater: amzn.to/3RFnfRe
XInfrared T2 Pro Thermal Phone attachment, Android: amzn.to/49ynxA7
XInfrared T2 Pro, IOS: amzn.to/3MHRbt1
Metal shell with picatinny rail for T2! amzn.to/4azE3iQ
Caldwell Folding Shooting Bench (AMAZING!): amzn.to/3FtShEy
Caldwell Matrix shooting rest: amzn.to/4dOD3tZ
Feeling generous? Want to support my non-monetized channel? www.buymeacoff...
Pick up an excellent quality scope from Discovery Optics at a super low price: www.discoveryo...?cid=bedf51fd
Oneleaf Night Vision stuff:
Oneleaf NV400:
oneleaf.ai/com...
COUPON CODE: "AirShootistNV400"
Rather do Amazon? Here: amzn.to/3ILX1a8
Oneleaf Commander NV500 Eagle Scope: oneleaf.ai/com...
10% discount code = AirShootistNV500
Oneleaf NV100 scope attachment links:
12mm: oneleaf.ai/com...
16mm: oneleaf.ai/com...
Scope Adapters: oneleaf.ai/com...
~~ ---- 10% off with code "AirShootist" ----~~
Follow my shenanigans on Instragram: / air_shootist
Interested in commercial / promotional / collaboration activities? Getting together to shoot? Questions? Comments? REACH ME HERE - [e-mail]

[@airshootist]

⬇ ⬇ ⬇ LINKS ⬇ ⬇ ⬇ (Buying thru these help the channel!!) $45 Hand Pump: amzn.to/3z8WIFe Or get it from Vevor (same pump) if you don't use Amazon: s.vevor.com/bfQg50 The Four Uncles hand pump is a few bucks more, similar, but super highly rated: amzn.to/4iQkuYv Airforce Hand Pump (Most sturdy): amzn.to/3NdWXBn Cheap Moisture filter (You really should have one): amzn.to/3rcFMK2 Want a low-cost but great compressor instead? amzn.to/3DycJ9F This compressor here is a bit more $$, but is a WORKHORSE: amzn.to/3WZORAX Check out the best airgun shop around, High Pressure Pneumatics at www.myhighpressureair.com/?aff=2 🎯 🎯 🎯 Tell them Air Shootist sent you! 🎯 🎯 🎯 ------------------------------------------------------------------------------------------------------- 🚨🚨HELP THE CHANNEL🚨🚨 by shopping on Amazon! Just click in via this landing page and do your shopping from there! Helps the channel and will not cost you a penny more! Thanks in advance!!! amzn.to/3gLVpD2 OR check out my new Amazon page where I have lists of cool stuff! www.amazon.com/shop/airshootist ------------------------------------------------------------------------------------------------------ Feeling generous? Want to support my non-monetized channel? www.buymeacoffee.com/airshootist Pyramyd Air affiliate link (landing page): www.pyramydair.com/?referer=217&Pyramyd+Air+-+One+stop+shop&Air+Shootist&cjevent=a3fb1f2e168011ed83f8a69d0a82b82c Buy a Diana Stormrider rifle here: www.anrdoezrs.net/click-100577055-13713383?url=https%3A%2F%2Fwww.pyramydair.com%2Fproduct%2Fdiana-stormrider-gen2-multi-shot-pcp-air-rifle-synthetic%3Fm%3D4833%239674&cjsku=PY-4833-9674 --- Other Stuff --- Heated Shooting shack and other Vevor stuff: VEVOR 8x14x7.6ft Shed: s.vevor.com/bfQKvj VEVOR Diesel heater: s.vevor.com/bfQL19 VEVOR 4500psi orange compressor: s.vevor.com/bfQmHz VEVOR Smaller, budget-minded blue compressor: s.vevor.com/bfQpEo VEVOR Heavy duty 30A extension cord: s.vevor.com/bfQL5c Discount code! VVSALE5 (5% off) 12V Power supply for Diesel Heater: amzn.to/3RFnfRe XInfrared T2 Pro Thermal Phone attachment, Android: amzn.to/49ynxA7 XInfrared T2 Pro, IOS: amzn.to/3MHRbt1 Metal shell with picatinny rail for T2! amzn.to/4azE3iQ Caldwell Folding Shooting Bench (AMAZING!): amzn.to/3FtShEy Caldwell Matrix shooting rest: amzn.to/4dOD3tZ Feeling generous? Want to support my non-monetized channel? www.buymeacoffee.com/airshootist Pick up an excellent quality scope from Discovery Optics at a super low price: www.discoveryopt.com?cid=bedf51fd Oneleaf Night Vision stuff: Oneleaf NV400: oneleaf.ai/commander-nv400-4-52x50-4k-digital-day-night-vision-riflescope.html#u30 COUPON CODE: "AirShootistNV400" Rather do Amazon? Here: amzn.to/3ILX1a8 Oneleaf Commander NV500 Eagle Scope: oneleaf.ai/commander-nv500-eagle-4k-digital-day-night-vision-rifle-scope.html#u30 10% discount code = AirShootistNV500 Oneleaf NV100 scope attachment links: 12mm: oneleaf.ai/commander-nv100-night-vision-add-on-12mm.html#u30 16mm: oneleaf.ai/commander-nv100-digital-night-vision-monocular.html#u30 Scope Adapters: oneleaf.ai/commander-nv100-scope-adapter.html#u30 ~~ ---- 10% off with code "AirShootist" ----~~ Follow my shenanigans on Instragram: instagram.com/air_shootist/ Interested in commercial / promotional / collaboration activities? Getting together to shoot? Questions? Comments? REACH ME HERE - [e-mail]

[@mrc4912]

Went for the $45 Amazon option and the pump is well built, easy to assemble and doesn't leak. Being 79 years old, this process is a little hard on my body and I had to give up with my tank on my Gamo Arrow only half filled. However, I found an electric dual voltage pump that pumps up to 4500 PSI on Amazon that was under $200, including taxes and shipping (Free). So I'll save my manual pump for a backup or when I want to see if I can use it to give myself a hernia....

[@rokinz3270]

Got a link for that one buddy I’m not 79 years old but pumping up tanks by hand isn’t quick or fun

[@nathanwebb4752]

Thank you for that! I needed a laugh today! 😂 👍

[@Biffo1262]

Mine arrived today.....blown away with the quality and performance. I bought another after first use. I have three BSA Ultras, a compressor, 7 litre bottle and now two pumps. My two eldest grandsons borrow a rifle each when they visit. It now means they can take a pump each and go their own way. They are light and with the folding feet, compact to slip into a back pack. Look after them and I see a lifetime of service. Serving and repair however doesn't daunt me as a I was a Siebe Gorman BA and compressor technician and instructor before I retired. I do recommend a decent oil/water trap. You can buy and inline QR one for less than £20 anywhere.

[@time-yt2cz]

just had to get in here and comment to help with the video KZbin algorithm. thank you for the work you did in the heat and humidity for your viewers.

[@airshootist]

Thanks dude! With enough comments we can beat the gun video suppression that happens on youtube constantly. I see you know how it works! Cheers!

[@WayneTheSeine]

Great video and thanks for your efforts. I am 75 yrs old and for something to do, I just bought a Umarex C02 to plink with. I love to squirrel hunt so I have been entertaining a mid-range break barrel. While researching guns I became aware of PCP's. I have never heard of them. That being said, I really like the idea of the PCP with a mag-type gun. My concern was the inconvenience o filling the gun. I certainly prefer not to invest in a compressor but was calculating a small tank to take to the local dive shop. I have seen the hand pumps and figured they would likely kill me. Watching you actually use one, I think I can handle it. So, your video has convinced me to go ahead and pull the trigger on an entry-level PCP I can squirrel hunt with. Thank You. I subbed BTW.

[@airshootist]

Thanks! Have a look at some of my compressor reviews, they are cheap and 100% way better than hand pumping! Shopping through the links I put in my comments/descriptions on all my videos is a great way to help out my non-monetized KZbin channel, too! Cheers!

[@WayneTheSeine]

@@airshootist Ah ha...will do.

[@darrencady4261]

Just had one of these (Vevor branded) delivered and it is superb. I honestly cannot understand how it can be bought at such a low price. I've always used FX pumps and this is every bit as good. Thanks for sharing.

[@escapetherace1943]

vevor is one of the actual good chinese companies, who actually test their products. I have a vevor diesel heater and it has been a champ

[@stevenlowrie726]

I have the VEVOR version of this type of pump...Great pump and still going after years

[@edwozniak6381]

Yea, you pump that thing! Pump it up real nice!

[@moukafaslouka4796]

I own a cheap Chinese pump I bought online several years ago. I don't use it that often. However, it has always worked for me.

[@spacepodi]

Good to know. Thanks.

[@bradhabit]

I've just spent the last 10 mins looking at shady ray sunglasses, thanks for the link!

[@bradhabit]

And I just bought the whole family sunglasses! VEERRR NIIICE I LIKE (Borat Voice)

[@airshootist]

@@bradhabit Yeah dude they are a great company. Good quality glasses. Lifetime free replacement. They even make snowboard goggles, which you'd definitely love. Thanks for using the link, king!

[@JohnSmith-bh8um]

​@@airshootistI'm about to purchase my first PCP. I'm set on the jts aircuda .22, are these pumps universal in nature? As in all pcp's have the same fitting?

[@hansvonmannschaft9062]

Oh! So it's normal for the pump to stay up after stroking. I mean, the black part you lift with the handle (yes I'm new haha!), once you're done pumping, remains a couple inches, perhaps a wee bit over an inch and half above the base, exposing the silver tube it rides around. Was the detail I was looking for, nobody mentioned it in any of the vids I watched, and was worried about my pump being defective. Just assembled it, now it's time to find where some tiny leak is, and voilá! Then wait for a nice day... haha! Anyway, thanks a lot for the vid mate, have a great one!

[@crypto_creep8222]

Nice review of the options for filling your guns

[@petethefeet5281]

'just bought mine - very impressed !

[@marioarvizu7077]

Great video. May me key difference will be the durability. I habe a Vevor cheap pump and has been worked for a year. I just use it weekends but to me, has been a good deal. I jis have two PCPS, Hatsan AT44 LONG AND A BENJY MARAUDER it takes about 250 pumps to fill a rifle fron yellow dial zone

[@guyskeer5411]

Bought the Azamon pump. Filling My NOTOS to 3650, Made a Part to better mate the Handle to the Main Barrel, using 3-D. Seems good.

[@brorjordas1979]

Yea. I paid totally €46 for my chinese handpump that I ordered from aliexpress for the use to fill my Sig Sauer Virtus 13ci PCP. Has worked well for me. Spare o-rings etc even came along. I did though put the pump onto an electrical pumping machine that I built. But itbhas served me well. I do clean and lube the lower external tube of the pump quite regularly - and sometimes I strip it apart to clean the check valve at the bottom, but I considerbit as plain maintenance to keep the pump going for a long time.. But overall I do personally think that a cheap handpump works basically as well as most more expensive handpumps (which are the same in build-class). I once did find online a Diana handpump to be identical to my pump - but the price was €199(national postages still excluded) instead of €46 (free intl shipping included)..

[@bayouflats5054]

Appreciate. I’m going to get it as a backup- for that price, why not? I “ think” I stumbled into a pumping trick. Instead of doing a full travel pump motion every time, I will do maybe 3 quick, partial pumps from between about 3-8 inches( can feel pressure build up some), followed by a full travel pump. It seems to decrease the amount of full travel pumps by enough to make it worth it “ to me”. 🤷‍♂️😁 Cheers

[@rockdude5150]

How many pumps would it take from empty?

[@NorthFloridaAirGunner]

I've been using a vevor pump to get my origin up to 3625psi for 7 months now and it's been great so far. I have an oring kit to rebuild it too if need arises.

[@pricelessppp]

How long did it take to fill the origin tank? Got one for my avenger as a back up and am little bit to intermediated lol! Got vevor brand also.

[@NorthFloridaAirGunner]

@pricelessppp takes 100 strokes to fill the origin from empty to full with a hand pump. Less than 4 minutes. I usually refill when it gets down to 1900psi which takes about 60 strokes.

[@pricelessppp]

@@NorthFloridaAirGunner Doesn’t sound to bad have you broke a sweat? Can this work well even with a vevor 45 buck pump?

[@NorthFloridaAirGunner]

@@pricelessppp 45 dollar vevor is what I use. Don't even break a sweat. And I'm a 30+ year smoker.

[@wildazme2006]

​@@NorthFloridaAirGunner is anything special needed for the pump set up? I bought one but the instructions are horrible. I think it says something about silicone oil?

[@DYS_72]

I think for his application it is a no brainer purchase. I would like to see a test up to 3-4k psi before being totally convinced as a outright replacement for the other brands. I also question the longevity at the higher pressure. Thanks for the video!

[@davidjulseth8667]

Thanks for sharing your comparisons...

[@seangannon193]

Great video have to see if available in UK

[@strawman3059]

Just got my first pcp and shopping now 💥🥊

[@royalconstrictor0005]

Solid! Thanks for the effort & comparison.

[@petercopley1242]

Good and informative video 😊

[@forestlaughner106]

Nice shirt bro I thought I recognized the grenade logo! The landmine lieutenant lol, Good video too 👍

[@airshootist]

GrandDaddy Grenade / Frosty the SnowThug / The Rubix Cuban / The Ammunition Magician! Who else but Celph Titled?!? Major props to you for actually having good taste in music! AOTP and Demigodz need to release some new stuff! I saw Apathy and Celph in concert one time and it was DOPE!

[@VitalArms]

Saw your amazon review, saw your video.. I bought it. Thanks dude.

[@VitalArms]

I’m not sure if I missed you mentioning it, but I also don’t see it labeled on amazon anywhere, does it come with the foster fitting?

[@airshootist]

Yep it comes with the fill whip and there is a foster on it

[@VitalArms]

@@airshootist awesome thanks bro, I’ve been wanting to get into PCP for years as I’ve always been into firearms but I thought the pcp world was out of my budget since all the guns I liked were thousands of dollars, but I then came across the Umarex origin which then lead me to the jts airacuda and now I’m just waiting on UPS to delivery it! Thanks again for helping me start out in the “real” airgun world. Lol the amount of money I’ve spent in the last 20 years on co2 bb/pellet guns is ridiculous 😂😂 gonna be making some videos soon to come on my experiences as a new pcp shooter.

[@airshootist]

Hell yeah, @@VitalArms ! I just subbed to your channel. If you ever need any advice or have questions hit me up any time [e-mail]

[@stedyone1090]

Currently unavailable but added to my shopping list. Thanks for sweating and sharing.

[@airshootist]

A hand pump is a damn good thing to have around.... just in case ;) I hadn't realized it was out of stock. Hopefully it will come back in stock soon!

[@frios011]

I’ll take 5 of the Orcair pumps all day long!

[@airshootist]

Absolutely. Wear one out? MEH! As Easy-E would say: "Throw it in the gutta, and go buy anotha"

[@earthenscience]

@@airshootist Absolutely NOT as that is just a form of conspicuous consumption, ewaste, runaway capitalism

[@Nick-gi6ym]

Thank You for the review great video

[@richards.8987]

I boight a Vevore Pump and compressor, the pump is the same exact pump you have there.

[@MilledSteel]

Great vid, I just got a 3622 that came with a cheap pump like the one you show. Don’t know much about PCP or maintenance on them.

[@ysteinkristiansen]

Nice video! I have just got my Artemis P900 wich is the same gun as the Stormrider. And I got a handpump to keep thing simple 😁 Norway is cold so the themps would not be a problem working a handpump 😅

[@rickervine]

thanks

[@bigChrisWithAtinyPeice]

How longs it take to fill an air gun?

[@mrhalfstep]

I'm glad the $45 option was competitive. More cheap means more new shooters to the sport. Always a good thing. Glad you made the content, but I think you did a disservice by showcasing your pumping style. In my own experience and based on the advice of long time shooters that I trust, if you pump more slowly and deliberately, with a brief pause at the top and bottom of each pump stroke, you will get a more complete transfer of air between 3 chambers within the pump and, ultimately, into the gun, resulting in far fewer pumps required. Less heat will be generated in the process and fewer rebuilds will be required. I'm guessing that this will be an even bigger issue with the cheaper pump. One other suggestion would be to hold your arms stiffer and squat and stand as you pump, rather than press down with your arms alone. As they pump to higher pressures, older and less fit shooters will find that letting their belly fat/weight do the work, by squatting, will made the pumping less taxing and my be the only way to get a complete fill on their gun.

[@patriotadventure]

I hit the like button and subscribed for the sweaty effort. 😊

[@jangleleg117]

Looks like some humid weather too. Carolinas? Looks like Tennessee where I used to live but hotter. If you want the hottest, most humid environment ever, go to Bahrain. Holy shit. There won't be a cloud in the sky but you'll wake up thinking it's raining, walk outside, and all the buildings are just pissing moisture down every wall and crevice. It's like trying to breathe under water when you first arrive

[@bigChrisWithAtinyPeice]

All those pumps, just to keep it where it needs to be filled.How long does it take to fill the damn thing?

[@jetdr]

I bought one for my Marauder and it works well, see how long it last.

[@budd1331]

I use that cheap pump to fill my origin to 3600 works great.

[@WaschyNumber1]

Ther is no justification for this high price levels for pcp hand pumps, they are only tubes, rods, o-rings and cheap Gauges nothing much more and the production cost broberly 10£ or so and the rest costs for the overpriced company name.

[@socal133]

Use a hand mirror if you're that self conscious. You should know the safety is on

[@trochartist]

100% correct

[@beastmode2990]

Get a vevor hand pump for 60$ it does the same job as the fx one that costs 250

[@davidmiller1151]

The only thing I don't like about this P.C.P. is that you need to point the barrel at your face to check the pressure!

[@OGs4OGs]

Simple just don't have it loaded while doing that.

[@davidmiller1151]

@@OGs4OGs okay.

[@shawndubay4050]

That is one reason why the Airforce airguns and the Benjamin marauder are on my favorite list. On the Airforce the tank and gauge are the rear end of the rifles and on the Benjamin marauder the gauge is on the bottom between the trigger and foregrip. This keeps you alot safer than the having the gauge on the business end. For the people with the gauge on the dangerous end always remove the magazine and fire a shot into the dirt to make sure 100% that the barrel is clear. Airguns are potentially deadly especially in the event of an accidental discharge like a hard knock or drop. Be careful people.

[@Tamlin73]

Get the Artemis Pr900w :) the meter is under the rifle, and it has a wood stock. But its the same rifle.

[@shawndubay4050]

@@Tamlin73 Sweet. How powerful and accurate is this rifle?? Might make a nice piece of the collection.

[@Aaron-us5iu]

I ordered one …. We’ll see….🤞

[@LowkeyAirgunner]

Pretty nice package for the price! The filling source cost is one of the main things stearing me away from a first pcp... [Pricing is worst in canada]

[@airshootist]

Surprised it's not outright banned up there like everything else! Haha jk jk but also sad face.... 😞 Can't you still use Amazon with just a currency exchange on the payment? Or maybe they have like an Amazon.CA?

[@CygnusX250]

cant help with price, but i used a handpump for many years. i then moved close to a scuba shop and got a tank and membership that gave me 2 fills a day. anyhow....pumping aint that bad...if your healthy......but theres so many small compressors in all kinds of price ranges. im now using a one of those 250$ china compressor + a couple of water oil separators

[@msamour]

I just got this pump. I have to put together my hi-paq for my 2240. I have a few mods to make to make sure the valve doesn't blow in my face. Hopefully this pump works well.

[@AlirezaMoeini]

Hello and thanks for the good educational video. Do you recommend a pump or a composite capsule for areas with humidity and rain? thanks

[@airshootist]

Yes I do. Always check the video description and pinned comments for useful links! :)

[@AlirezaMoeini]

@airshootist Thanks🙏

[@Z28PAPI]

That 45 dollar pump looks just like my air venturi g6 pump, I paid more than 2x that!

[@airshootist]

best part is: it was probably made in the same factory! Haha. The Orcair pump is definitely pretty nice!

[@timothyotell2574]

Good info I just inherited a benjamin bulldog 357 ..no nothing about pcps

[@DJESHGAMING]

30~40 pumps for such little movement on the meter? How many pumps to completely fill the gun from empty? 1000? I was looking into a pcp gun that comes with a pump but this puts me off a little lol

[@airshootist]

lol no that's a small like 80cc tube. Less than 100 pumps probably. Now, the Airforce Talon SS I used to exclusively hand pump was probably 1000 or more strokes and it sucked but was a good workout. If you're worried about using a hand pump then just get a compressor, this one has been the absolute workhorse of the 7 or so I own: amzn.to/3RnD6Uq

[@ShogunSaint]

@@airshootistwhat do you think about the TOAUTO A2X?

[@airshootist]

@@ShogunSaint ToAuto is really good but this is my current favorite amzn.to/3Rn4PEX

[@GrandmasterHobbyist]

i wonder if there is anything newer now that is significantly more efficient

[@airshootist]

nahh they are all the same pattern and design. I just got a new one from Vevor and it's exactly the same thing. Always good to have a few around as backups.

[@dangkhang9479]

Been using the Amazon pump for 3 years and no major issue so far. However, the gauge broke and is now 1,000 PSI below the actual PSI.

[@bobbythompson3544]

I have searched Amazon UK and can’t find the Orcair pump!

[@1davechandler]

Nice video, I'm going to look into the Orcair pump, just bought my first PCP rifle, where do you get a rebuild kit for the Orcair when needed? I see that it does come with one but once that is gone where do you get another one at?

[@airshootist]

You can probably just size the orings and pick them up at a local hardware store after that. Or simply buy a new hand pump since they are so cheap. A better idea is to grab a compressor since they are also very cheap nowadays and use the hand pump as a backup. I have multiple compressor reviews on the channel. My favorites right now are the Orcair Thunder and the ToAuto A3. I have links to both in the comments.

[@1davechandler]

@@airshootist thanks for the reply, I did order the hand pump for now and I think today I have seen every video on compressors you have posted and added them to my cart on Amazon so I can look farther into them in the next few days. I will definitely buy a compressor but going to use the hand pump for now, great videos I have really enjoyed all of yours that I have watched today.

[@jeffojibway9284]

Did the Airforce pump do better cause it had help from a shorter hose smaller diameter hose ? hard to tell in the video. I keep a very short micro bore hose and a Edgun Ezfill on my tank to minimize air loss. Next video how many pumps from a hand pump to fill a 100 cf scuba tank... keep the videos coming!

[@airshootist]

You know, I was thinking about the hose volume, too. I think the Orcair came in first, with lets say 27 pumps. Being new probably helps. Then came the Airforce with 30 pumps, then the FX with 35 but the FX's bleeder was not fully in so it leaked a bit while pumping. So maybe they are all right around 30 pumps. All 3 are 3 stage pumps, not 4 stage. I one time pumped up a 68ci paintball tank to 3000psi from 0 just to see if I could. NEVER AGAIN

[@kosasin1182]

@@airshootist Did you get to 3000 PSI on that 68 Ci tank? If so, How many pumps?

[@airshootist]

@@kosasin1182 I've done it before but no way am I ever hand pumping a tank that big ever again when I have several compressors!

[@arcticairgunner]

Man it was tiring just watching you fill those tanks. I have the Hatsan hand pump, but avoid using it whenever possible. It's ok for small tanks, but for a 510cc FX bottle at 4500psi, no thanks. Thanks for sharing 👍

[@airshootist]

I'm still tired from that pumping over a year later!

[@Relaxbadkneeadventures]

Nice video thanks 👍😉

[@airshootist]

You are very, extremely, tremendously welcome! Thanks for the nice comment! Have a great day and take it easy on that knee, will ya?! 😅

[@Relaxbadkneeadventures]

@@airshootist yep new knee but still not great 👍😉thanks have a nice day .greetings from the 🇳🇱

[@jamesgaszak3685]

Great video. Has the new pump held up?

[@airshootist]

Thanks, James! Still going strong!

[@164procar4]

30 pumps every 6 shots? I’m gonna call an ambulance after 10min of plinking

[@ADAM-qr7bi]

Will this work with the avenger

[@airshootist]

Yessir!

[@ADAM-qr7bi]

YEAH I FOUND ANOTHER VID SHOWING IT DOES THANKX FOR RESPONDING@@airshootist

[@vipercustom8104]

Can you not swap the gauge and the outlet hose around on the FX pump to allow you to see the pressure while pumping and give you better access to the bleed knob?

[@airshootist]

You can. If I recall correctly I partially stripped the threads like 15 years ago and swapped them because I think the gauge had longer threads so I could teflon tape it better and get it to seal. It's ancient history now, but good eye, it's only like that because of my own misdoings! Haha

[@Mike-c6v9z]

Can I use a hand pump on an AEA airgun?

[@airshootist]

sure. Depending on the size of the tank you might be in for a serious workout

[@Mike-c6v9z]

@airshootist Thanks!

[@mikethemythtanduy2007]

What scope you have on your gun. Thank you

[@airshootist]

Mostly I use Element Optics scopes on all my airguns but on this particular budget gun I am using a Nikon rimfire scope.

[@mrymate1257]

Thank you Ken Block for that review!

[@airshootist]

Hahaha! You're not the first person to call me that! Cheers, dude!

[@Justintheinsane]

Thank God. I can save a hundred bucks or so starting my PCP air rifle hobby

[@pricelessppp]

Order my pcp hand pump since my compressor died I’m kind of dreading it lol but exited might make me get a pcp pistol for my second pcp!

[@oboyfishfly]

I would like to see effect of speed on the pump.

[@jasondevault5066]

I have a umarex pump. Do you make a rebuild video?

[@airshootist]

No but they are relatively easy to take apart. Just search online for some diagrams and you'll get the idea. Just make sure you have some 100% silicone oil and grease for the rebuild, you'll need it.

[@jasondevault5066]

@@airshootist Thanks. I have the grease, what oil do you recommend?

[@airshootist]

@@jasondevault5066 In order to not blow yourself up and die, you will need 100% silicone oil. Petroleum oils can combust under high pressure, whereas 100% silicone will not. Here is what I use: amzn.to/44a6ikE Shopping via my Amazon links helps the channel a little bit, so thanks in advance if you're using my links - including if you just do your regular shopping via clicking in via any one of my Amazon links. Every bit helps when you're a non-monetized channel! 🤠

[@jasondevault5066]

@@airshootist That's exactly what I have. So just use that?

[@gboutdoors5198]

ive had my vevor pcp hand pump like 50 bucks and it started to fall apart and its only been 5 months

[@MorsePamela-r9h]

Klocko Shores

[@v0n1b0]

Thanks for the excellent review but unfortunately these have gone up to $59.99 on Amazon. There are still some other pumps there in $45 range only with mixed reviews.

[@airshootist]

That ridiculously low price couldn't last forever! Still a great deal and I'd go with the Orcair over others.

[@earthenscience]

@@airshootist It looks exactly the same as other 45 dollar Chinese pumps.

[@tommythetrain1945]

have a vevor 3 stage and a beeman commander 25 cal. i can only get 5 pumps in... i dont understand 145 lbs i am and not really weak... the hell...?

[@psychuout14]

What type of rifle is that?

[@airshootist]

It's a Diana Stormrider! Super nice for the price! You can pick one up at this outrageously long affiliate link to Pyramyd Air: www.dpbolvw.net/click-100577055-13713383?url=https%3A%2F%2Fwww.pyramydair.com%2Fproduct%2Fdiana-stormrider-gen2-multi-shot-pcp-air-rifle-synthetic%3Fm%3D4833%239675&cjsku=PY-4833-9675

[@rellmonger7935]

Nice

[@Leba2006]

Great comparison review video. How's the "cheap" pump holding up two years later? Still recommend it? Thanks

[@airshootist]

Holding up just fine! I use it on the Stormrider all the time. Links for everything are in the description

[@WrongTimeWatch]

I have been doing some research as I want to get into PCP from SSP and I read that you are supposed to wait a a second at the top and bottom of the pump stroke. Have you tried that to see if you can get away with less strokes?

[@airshootist]

Waiting is not necessary but you definitely want to make sure you go all the way up and all the way down for the most efficient stroke. And don't pump it like crazy in the summer without giving it a break, these can get a bit hot and perhaps melt a seal if you really beat on them. They are best suited for guns under 150cc, even though I got away with using them to pump a 490cc Airforce tank for over 15 years 🤣 I have rebuilt the FX and the Airforce pump more times than I can remember from all the use and they still are going strong

[@WrongTimeWatch]

@@airshootist Thanks for the reply, for $45 it is a great way to get into the hobby.

[@Ezduztube]

Mine was $129 Mcs brand.😩

[@BettyTyler-n5m]

Precious Passage

[@josephpagada7253]

How to order

[@airshootist]

Check the description and/or pinned comment for a link!

[@KristoferLaffey-s6u]

Upton Isle

[@RyanChatman-f6n]

Heathcote Light

[@supergreatairgunreviews]

Well your video convinced my cheap azz to buy one of these chinese pumps to go along with Barra 1100z .22 that was on sale for $225 haha

[@stevewilliams2895]

its crazy how cheap these are, you could pick one of these up and a PR900for under £300.

[@CarnegieBaldwin-h1k]

Witting Haven

[@CarterRebecca-z4v]

Leuschke Corners

[@WilsonRegan-w1r]

Kessler Loaf

[@SamGary-c2h]

Berge Lock

[@ElroyBayliff-i9b]

Boyer Meadow

[@RebaButeau-j9r]

Bayer Cape

[@MalachiKristin-v4r]

O'Keefe Parks

[@JustinLonger-gt2mm]

Bonnie Tunnel

[@MarthaOlmstead-v6p]

Breitenberg Ports

[@FlynnLouis-p5u]

Hessel Station

[@BarrieAlice-z7k]

Alta Fields

[@SimonDylan-t5e]

Keeling Plains

[@JasonSprayberry-u4o]

Halvorson Roads

[@HelenMartin-r3c]

Malcolm Circle

[@mike-ii4jp]

Wondering if anyone uses a bike for air pump. The usually run about 85 bucks or less

[@islamdo]

I have been using my Chinese air pump for almost 8years now Pump to 220bar with no problems at all And I have 500 cc tank I know that’s big and I need over 700 pump to fill it up hahha

[@domingoliao2724]

I had mine an Air Venturi G-6 ( rebranded,made in China) for maybe 12-13 yrs. & haven’t ‘had any breakdown, faster filling than my newer Hill Mk4 which bogged down first after a few years! the made in China handpump was more dependable & trouble free, the only thing I do with it is occasional checking of dirt & lubing it !

[@paristo]

Save some money and build a autopump: kzbin.info/www/bejne/nJelendjmd1re9U kzbin.info/www/bejne/gqiVq5eNm9aJlcU I was considering to buy a PCP, but didn't know the amount how much you need to pump to get a 200-300 bars filled. That simply killed the whole idea that you can have some relaxing shooting time, as if one needs to pump 200-400 times to get to rifle going, it is not worth it, unless you are really a hunting with it and need just a few shots per day. The idea of compressor just was not worth the cost, as you pay same as for the gun. And then you need to wait 20-40 minutes to get those filled. Building a own electric pump requires 1-2 pumps and you are quickly now in the cheap air compressor price range, but you should get it still faster filled. But you don't have the space saving with it, and likely not able to run it from a 12V battery if needed. So then comes the small scuba tanks, again costly and requiring to go filling elsewhere for price. But giving 2-120 fills, they can be good option for off-grid people, again for hunting purposes as you don't shoot so much. So if wanted to do some hunting, then use the pump. It will serve better than nothing else. If wanted to do competition shooting, then it is the air compressor. And for fun shooting where you put hundreds/thousands of pellets on weekend, then it is time to get the air tank.

[@MarshaGowen-f9f]

Laury Brook

[@DonaldHamilton-z2i]

Swift Mall